AMC AMX Drivetrains
Top AMC AMX Drivetrains Categories
We carry over 228 Drivetrains in inventory for the AMC AMX. If you’re looking for aftermarket Drivetrains for your AMC AMX, check out all these categories:
Essential AMC AMX Drivetrains
Yukon Gear – Model 35 Cover Gasket (Part No.23026)
Yukon Gear – 8.75" Chrysler & 55P Chevy Power Lok Clutches, Model 20 Also, Posi (Part No.16148)
from
$275.99
8.75″ Chrysler & 55P Chevy Power Lok clutches, Model 20 also, POSI.
Product Features:
See More
Product Features:
- Clutch kit
- Fits Chrysler 8.75″, 1955-1964 GM passenger car and AMC Model 20 Powr Lok positraction
Motive Gear – Differential Carrier Shim Kit (Part No.1130)
Dorman – Differential Pinion Yoke Assembly (Part No.697-555)
from
$89.99
Worn or damaged differential end yoke causing driveline vibrations- This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this differential end yoke matches the fit and construction of the original yoke
- Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts
- Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
- Validated fit – this differential end yoke has been tested to confirm accurate fit
National – Multi-Purpose Bearing (Part No.307-L)
from
$43.99
Product Features:
See More
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Yukon Gear – Model 35 Roll Pin For Cross Pin Shaft, 0.190" Diameter (Part No.33320)
from
$5.99
Model 35 roll pin for cross pin shaft, 0.190″ DIA.
Product Features:
See More
Product Features:
- Roll pin
- Fits AMC Model 35
Yukon Gear – High Performance Ring & Pinion Gear Set For Model 20 In A 4.11 Ratio (Part No.24175)
from
$447.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.
Product Features:
See More
Product Features:
- Fits AMC Model 20
- 8.875″ ring gear diameter
- 28 spline pinion
- 8 ring gear bolts
- 4.11 ratio
Yukon Gear – Minor Install Kit For Model 35 Differential (Part No.12067)
from
$186.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.
Product Features:
See More
Product Features:
- Fits AMC Model 35
- Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
Yukon Gear – Pinion Seal For Model 20 And Model 35 (Part No.30079)
from
$9.99
Pinion seal for Model 20 and Model 35.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion seal
- Fits AMC Model 20 and AMC Model 35
Dorman – Spindle Washer – I.D. 13/16 In. O.D. 1-21/32 In. Thickness 3/32 In. (Part No.618-013.1)
from
$4.99
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (sold by each) (Part No.615-072)
from
$4.79
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and Length service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Bearing Race Driver (Part No.56023)
from
$219.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits M88010 race
- All steel construction
National – Multi-Purpose Bearing (Part No.207-L)
from
$37.49
Product Features:
See More
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Yukon Gear – Pinion Install Kit For Model 35 Differential (Part No.13083)
from
$215.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits AMC Model 35 rear
- Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
Yukon Gear – 1310 & 1330 U/Joint Strap, Dana 30, Dana 44, Model 35, & 9.25" With Bolts (Part No.41195)
from
$18.99
1310 & 1330 U/joint strap, Dana 30, Dana 44, Model 35, & 9.25″ w/bolts.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits Dana Spicer 30 and 44, AMC Model 35 and Chrysler 9.25″
- 1310 and 1330 u-joint size
- Includes two straps and four bolts
Yukon Gear – Model 35 & Other Screw-Inaxle Stud, 1/2" -20 X 1.5" (Part No.33180)
from
$5.99
Model 35 & other screw-inaxle stud, 1/2″ -20 x 1.5″.
Product Features:
See More
Product Features:
- Screw in axle stud for AMC Model 35
- 1/2″ x 20 thread
- 1.5″ long
Yukon Gear – Standard Open Carrier Case & Spiders, Amc Model 35, 3.31 & Down (Part No.20064)
from
$529.99
Model 35 standard Open loaded, 3.31 & down (excluding.3.27).
Product Features:
See More
Product Features:
- Standard open carrier case and spiders
- Fits AMC Model 35
- 3.31 and down ratio only
Yukon Gear – Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler (Part No.33301)
from
$4.99
Pinion gear thrust washer for 8″ and 9″ Ford, Model 20, and 7.25″ Chrysler.
Product Features:
See More
Product Features:
- Pinion gear thrust washer for Ford 8″, Ford 9″ and Chrysler 7.25″
Yukon Gear – Trail Repair Kit For Model 35 With 1310 Size U/Joint And Straps (Part No.32287)
from
$221.99
Yukon trail repair kit for Model 35 with 1310 size U/joint and straps. This kit comes with a yoke, U/joint, pinion seal, U/bolt or strap kit, pinion nut, and pinion nut washer (if applicable).
Product Features:
See More
Product Features:
- Fits AMC Model 35
- 1310 u-joint size
- Kit includes yoke, U-joint, pinion seal, pinion nut and washer, straps, bolts and threadlocker
National – Shaft Repair Sleeve (Part No.99193)
from
$43.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
National – Multi-Purpose Seal (Part No.5200)
from
$12.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
National – Multi-Purpose Bearing (Part No.A-5)
from
$17.99
Product Features:
See More
- CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN: Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Yukon Gear – Model 20 Axle End Play Shim (Part No.55061)
from
$8.99
Model 20 0.005″ axle end play shim.
Product Features:
See More
Product Features:
- Axle end play shim for AMC Model 20
- 0.005″ thick
Schaeffler – Cup (Part No.LM48510)
from
$7.69
With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
Yukon Gear – Standard Open Cross Pin Shaft (.750") For Ford 8", 8.8", 9" And Model 20 (Part No.33332)
from
$16.99
Standard open cross pin shaft (.750″) for Ford 8″, 8.8″, 9″ and Model 20.
Product Features:
See More
Product Features:
- Cross pin shaft for Ford 8″, 8.8″ and 9″ and AMC Model 20
- Fits standard open differentials only
- 0.750″ diameter
AMC AMX Drivetrains Categories
Helping You Find the Right Drivetrains for Your AMC AMX
You love your AMX. So we’ve made it easier than ever to help you find AMC AMX Drivetrains in our online catalog. Our inventory holds 228 aftermarket and OEM Drivetrains for your AMC AMX, ranging from $1.99 to $1,566.99.
We offer parts from 15 brands trusted to make quality Drivetrains for your AMC AMX. Before you buy, take some time to read through customer reviews. We currently have 20,820 reviews of AMC AMX Drivetrains from previous customers. Some of the top rated parts include Greaseable Super Strength Universal Joint with 4.6 stars and Non-Greaseable Super Strength Universal Joint with 4.3 stars.
Find your AMX Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your AMC AMX part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Drivetrains Brands for Your AMC AMX
Our inventory holds Drivetrains for your AMC AMX from 15 trusted brands. You’ll find OEM and aftermarket parts from brands like Valvoline, Moog, and National, all of which can keep that AMC happy.
We have Dorman parts available for your AMC AMX in categories like Spindles. Some of the top-rated Dorman parts in these categories are:
from
$5.49
(3)
Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm
Spindle Retainers
Top-Rated Valvoline Drivetrains
Leading Valvoline Drivetrains
We carry Valvoline brand parts for your AMC AMX across several catalog categories, including Differentials. Some of our most reviewed Valvoline parts include:
FAQs for AMC AMX Drivetrains
What are the most purchased Drivetrains for the AMC AMX?
Out of 228 Drivetrains for the AMC AMX, the most popular in our inventory are:
What are the top-rated AMC AMX Drivetrains?
Top-rated Drivetrains for your AMC AMX based on customer reviews/ratings are:
from
$41.49
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
