AM General V-Belts

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

• This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
• Polyester cords provide extreme tension-holding capability for longer belt life
• The raw edge belt design delivers the maximum gripping power
• The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.

Product Features:

•  Provides greater durability and flexibility – 35% stronger than all previous versions
• Prevents electromechanical interference issues on modern vehicles
•  Resists heat, oil and grease

Gates Fleet Runner Micro-V Belts are designed for the toughest applications. Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

• Patented material provides peak performance at prolonged extreme operating temperatures
• Heavy-duty construction resists cracking and wear, even at extreme temperatures
• The special compound provides unprecedented flexibility, stability, load-carrying capacity, and belt life.
• Problem solver designed for the toughest applications
• Consistently outperforms other heavy-duty serpentine belts on the market
• Engineered to save your fleet money and reduce downtime
• Replacing the tensioner is recommended (if the vehicle is equipped with one).

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

• Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
• EPDM rubber constructions resist cracking on the rib surface
• Meets or exceeds all original equipment manufacturer specifications.
• Replacing the tensioner is recommended (if the vehicle is equipped with one).
• Unique form grinding of each individual belt assures precise dimensional control.
• Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.

Product Features:

• ┬áProvides greater durability and flexibility Γ┐┐ 35% stronger than all previous versions
• Prevents electromechanical interference issues on modern vehicles
• ┬áResists heat, oil and grease

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

• The fiber-reinforced rubber support adds flexibility along the belt and provides greater lateral stability on the pulley.
• Ground to ensure precise dimensional control of the top width and side wall for proper fit to the pulley.
• Thermally active tension cords for maintenance-free operation when the belt is properly installed and tensioned
• Resistant to oil, heat, ozone, weathering and aging for a longer belt life.
• Meets or exceeds SAE J636C specifications

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

• The fiber-reinforced rubber support adds flexibility along the belt and provides greater lateral stability on the pulley.
• Ground to ensure precise dimensional control of the top width and side wall for proper fit to the pulley.
• Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
• Resistant to oil, heat, ozone, weathering and aging for a longer belt life.
• Meets or exceeds SAE J636C specifications

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

• The fiber-reinforced rubber support adds flexibility along the belt and provides greater lateral stability on the pulley.
• Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
• Thermoactive traction ropes for maintenance-free performance when properly installed and tensioned
• Resists oil, heat, ozone, weather and aging for improved belt life
• Meets or exceeds SAE J636C specifications

This Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.

Product Features:

• Constructed with heat and ozone resistant EPDM rubber
• Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
• Made with treated polyester cord to reduce belt stretch
• Meets OEM requirements

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

• Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
• Ground to ensure precise dimensional control of the top width and side wall for proper fit to the pulley.
• Thermoactive traction ropes for maintenance-free performance when properly installed and tensioned
• It resists oil, heat, ozone, weather, and decay to improve belt life.
• Meets or exceeds SAE J636C specifications

Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:

• Molded notches reduce bending stresses, especially on small diameter pulleys, while also dissipating heat.
• High modulus, high strength tensile cord
• Oil and heat resistant construction
• Meets SAE J636b and SAE J637 specifications
• Compliant with RMA standards for oil and heat resistance and static conductivity requirements
• NOTE: Some sizes available as Gates PowerBand joined V-belts

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

• Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
• The shape is rectified to ensure precise dimensional control of the top width and side wall for a proper fit to the pulley.
• Thermoactive traction ropes for maintenance-free performance when properly installed and tensioned
• It resists oil, heat, ozone, weather, and decay to improve belt life.
• Meets or exceeds SAE J636C specifications