Acura Vigor Engine Parts
Top Acura Vigor Engine Parts Categories
We carry over 38 Engine Parts in inventory for the Acura Vigor. If you’re looking for aftermarket Engine Parts for your Acura Vigor, check out all these categories:
Essential Acura Vigor Engine Parts
Carquest Premium – Engine Oil Filler Cap: 10081, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10081)
from
$9.99
Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
Product Features:
See More
Product Features:
- Provides proper seal to ensure leak prevention
- Stops engine blow by
- High quality construction
- Meets all OEM specifications
Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26745)
from
$19.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- Application specific
- SUV and rear air applications
National – Redi-Sleeve (Part No.99204)
from
$46.99
Designed to provide enhanced endurance and maximum contamination exclusion while ensuring proper fit, form and function.
See More
Felpro – Oil Pan Gasket Set: Rubber End Seals, With Gasket Sealant, 6 Piece Set (Part No.OS 30812)
from
$26.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SUPERIOR SEAL — Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
- PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
- OE-STYLE REPLACEMENT GASKET — Engineered for OE-style molded rubber gasket replacement
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development
- ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development
Ishino – Stone Valve Cover Seal Washer (Part No.A803357846ISH)
from
$4.09
ISHINO STONE® – Ishino Corporation of Japan – has been manufacturing gaskets and seals since 1932 and tier-1 OEM supplier to Toyota, Honda and other Japanese auto manufacturers. The Ishino Stone solution is to supply gaskets featuring a combination of different elastomer layers, carefully adapted to complement each other and preserve the integrity of the seal.
Product Features:
See More
Product Features:
- Superb quality and precision manufacturing process to ensure overall sealing dependability
- Static sealing solutions are guaranteed to supply strong sealing power to eliminate any leakage
- Manufactured to exact OEM specifications
National – Multi Purpose Seal (Part No.224053)
from
$12.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Ishino – Stone Intake Plenum Gasket (Part No.A8041114292ISH)
from
$5.14
ISHINO STONE® – Ishino Corporation of Japan – has been manufacturing gaskets since 1932 and tier-1 OEM supplier to Toyota, Honda and other Japanese auto manufacturers. The Ishino Stone solution is to supply gaskets featuring a combination of different elastomer layers, carefully adapted to complement each other and preserve the integrity of the seal.
Product Features:
See More
Product Features:
- Superb quality and precision manufacturing process to ensure overall sealing dependability
- Static sealing solutions are guaranteed to supply strong sealing power to eliminate any leakage
- Manufactured to exact OEM specifications
National – Multi Purpose Seal (Part No.710460)
from
$7.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Ishino – Oil Filler Cap Gasket (Part No.A6150177513ISH)
from
$1.89
Oil Filler Cap Gasket
National – Multi Purpose Seal (Part No.228015)
from
$30.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Gates – Straight Heater Hose: EPDM, Direct Fit, 0.5" Inside Diameter (Sold by foot) (Part No.28410)
from
$3.29
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- CAUTION: Do not use for fuel or oil transfer applications
- CAUTION: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26413 PT)
from
$98.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
- SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
- MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
- UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
Nippon Reinz – Nippon Reinz Cylinder Head Gasket (Part No.A8100114327NRZ)
from
$159.37
Nippon Reinz does not just cut gaskets – it designs total system sealing approaches that utilize application engineering. This means that regardless of what application you are trying to seal, you can count on Nippon Reinz doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. All gaskets are not created equal – Nippon Reinz gaskets prove it every day.
Product Features:
See More
Product Features:
- Original equipment design and quality
- Head sets give you original equipment form, fit, and function
- Utilizes OE equivalent or better materials in all head sets
- Packaged in shrink wrapped tray
Imperial – Ultra-Cool Engine Oil Cooler Kit (Part No.240457)
from
$167.99
Product Features:
See More
- Size: 3/4 in. x 10 in. x 12-1/4 in.
- Medium duty applications
- All except Chevrolet V8 applications
- Two-pass design for increased cooling
Imperial – Engine Oil Cooler (Part No.241040)
from
$216.99
Product Features:
See More
- Imperial Swirl-Cool« engine oil cooler kit
- Size: 1-1/2″ x 6-1/2″ x 18″
- Heavy-duty applications
- All except Chevrolet V8 applications
- Universal Cooler, NOT a direct OE replacement. User to determine fitment prior to installation
- Heavy duty applications
- All except Chevrolet V8 applications
Felpro – Engine Crankshaft Seal Kit (Part No.TCS 46128)
from
$11.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
- Includes all the parts necessary to complete the repair unless otherwise noted
- Includes all the parts necessary to complete the repair unless otherwise noted
Arai Seisakusho – Crankshaft Seal (Part No.A806036863ARS)
from
$12.39
Crankshaft Seal
Felpro – Cylinder Head Gasket Set (Part No.HS 26413 PT)
from
$327.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Ishino – Oil Cooler Seal (Part No.A6310324297ISH)
from
$6.13
Oil Cooler Seal
Ishino – Camshaft Holder Seal (Part No.A3018177122ISH)
from
$2.96
Camshaft Holder Seal
OPT – Valve Cover Gasket (Part No.A803050771OPT)
from
$11.07
Valve Cover Gasket
Beck/Arnley – Valve Cover Gasket (Part No.036-1578)
from
$22.99
Manufactured to OE specifications for a precise fit. Engineered to provide exceptional service life and reliability. Designed to withstand the harsh conditions in the modern engine compartment.
See More
Ishino – Stone Valve Cover Gasket Set (Part No.A8029114286ISH)
from
$22.75
WARNING: This item cannot be returned for a replacement or refund if opened! ISHINO STONE® – Ishino Corporation of Japan – has been manufacturing gaskets since 1932 and tier-1 OEM supplier to Toyota, Honda and other Japanese auto manufacturers. The Ishino Stone solution is to supply gaskets featuring a combination of different elastomer layers, carefully adapted to complement each other and preserve the integrity of the seal.
Product Features:
See More
Product Features:
- Superb quality and precision manufacturing process to ensure overall sealing dependability
- Static sealing solutions are guaranteed to supply strong sealing power to eliminate any leakage
- Manufactured to exact OEM specifications
Acura Vigor Engine Parts Categories
Helping You Find the Right Engine Parts for Your Acura Vigor
You love your Vigor. So we’ve made it easier than ever to help you find Acura Vigor Engine Parts in our online catalog. Our inventory holds 38 aftermarket and OEM Engine Parts for your Acura Vigor, ranging from $1.89 to $327.99.
We offer parts from 13 brands trusted to make quality Engine Parts for your Acura Vigor. Before you buy, take some time to read through customer reviews. We currently have 242 reviews of Acura Vigor Engine Parts from previous customers. Some of the top rated parts include Ultra-Cool Engine Oil Cooler Kit with 5.0 stars.
Find your Vigor Engine Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Acura Vigor part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Engine Parts Brands for Your Acura Vigor
Our inventory holds Engine Parts for your Acura Vigor from 13 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest Premium, National, and Imperial, all of which can keep that Acura happy.
We have Beck/Arnley parts available for your Acura Vigor in categories like Engine Internals and Engine O-Ring and Hardware. Some of the top-rated Beck/Arnley parts in these categories are:
Top-Rated Carquest Premium Engine Parts
Leading Carquest Premium Engine Parts
We carry Carquest Premium brand parts for your Acura Vigor across several catalog categories, including Engine Blocks. Some of our most reviewed Carquest Premium parts include:
from
$9.99
(26)
Engine Oil Filler Cap: 10081, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
Oil Caps
FAQs for Acura Vigor Engine Parts
What are the most purchased Engine Parts for the Acura Vigor?
Out of 38 Engine Parts for the Acura Vigor, the most popular in our inventory are:
What are the top-rated Acura Vigor Engine Parts?
Top-rated Engine Parts for your Acura Vigor based on customer reviews/ratings are:
from
$167.99
(1)
Ultra-Cool Engine Oil Cooler Kit
“Purchased for a 2005 Yukon XL Denali. Exceeded expectations for an aftermarket product”
