Acura TSX Engine Timing Parts

With the backing of an industry-leading two year or 60,000 mile parts and labor warranty, each Dayco timing chain kit includes top-grade timing chains, precision machined crank sprockets and cam sprockets, tensioners, high-grade plastic guides, seals and VVT solenoids and cam phasers if the application calls for it.

Product Features:

• High quality chains prevent stretch for the life of the kit, addressing the no. 1 replacement issue
• Precision machined sprockets for exact timing
• High-grade plastic guides use same material as OE for excellent wear resistance
• Contains: Camshaft Sprocket, Crankshaft Sprocket, Chain, Chain Tensioner, Tensioner Arm, Chain Guide (2), Balance Shaft Chain, Balance Shaft Tensioner, Balance Shaft Guide, Balace Shaft Sprocket

Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco’s timing belt kits with water pump ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners, idler pulleys and water pumps each matched to a specific vehicle make and model. In addition, the water pump features superior gaskets that retain bolt torque, a roller bearing hub and composite seals to prevent leaks.

Product Features:

• Engineered for both domestic and import vehicle applications with a timing belt
• Features a 125,000 mile one of the best in the industry
• Includes premium Dayco components and a tough, wear-resistant belt

ENG TIMNG BELT IDLER

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

• Precision-wound coated copper windings increase product durability and life cycle.
• Hard-coated and anodized spool valve to prevent corrosion and increase service life.
• Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
• Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

This engine timing belt idler pulley bolt is engineered to match the fit, function and performance of the original bolt to ensure that the timing belt idler pulley is securely mounted to the engine on specified vehicle years, makes and models.

Product Features:

• Direct replacement – this engine timing belt idler pulley bolt is engineered to match the fit, function and performance of the original bolt on specified vehicle years, makes and models
• Ideal solution – designed to securely mount the timing belt idler pulley and fix engine misfiring or other problems caused by a fatigued or sheared bolt
• Durable construction – this bolt is made from quality materials for reliable service
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Meets or exceeds OEM performance requirements.;Cloyes utilizes the latest in design And material technology, ensuring quiet And maintenance-free experience.

Product Features:

• Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
• Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
• CAD designed and manufactured using premium materials
• Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
• Refer to our online catalog for detailed application-specific information

Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.

Product Features:

• Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
• Offers noise reduction and minimum dimensional tolerances for precise valve timing
• Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
• This belt has a round tooth profile; designed to fit the timing sprockets precisely

This engine variable valve timing (VVT) solenoid filter is designed to match the fit and function of the original filter on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this engine variable valve timing (VVT) solenoid filter is designed to match the fit and function of the original filter on specified vehicles
• Restores functionality – reliable replacement for an original part that has failed due to clogging
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Meets or exceeds OEM performance requirements. Cloyes utilizes the latest in design And material technology, ensuring quiet And maintenance-free experience.

Product Features:

• Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
• CAD designed and manufactured using premium materials
• Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
• Meet or exceed OEM performance requirements
• Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

Designed to absorb changes in timing belt tension caused by variations in engine temperatures, speed or the general wear and aging of the belt, the Dayco hydraulic timing belt actuator keep belt tension at a constant level. It reduces noise, prevents belt flapping and ensures proper timing effectiveness throughout the entire service life of the belt. The Dayco hydraulic timing belt actuator is manufactured to meet the critical OE quality, form, fit and function requirements necessary for superior performance.

Product Features:

•  Designed to dampen noise and enhance belt life
•  Keeps belt tension at a constant level for better performance
•  Meets OE fit, form and function criteria
• Prevents belt flapping

ENG TIMNG CHAINTNSNR

Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco timing belt kits ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners and idler pulleys – each matched to a specific vehicle make and model.

Product Features:

• Engineered for both domestic and import vehicle applications with a timing belt
• All components needed for a complete timing belt replacement included in one box
• Includes premium Dayco components and tough, wear-resistant belt

Since 1921, Cloyes has been the trusted leader in automotive timing systems. Our timing chains are built to synchronize crankshaft and camshaft rotation with absolute accuracy, ensuring precise valve timing and long-term engine performance. Available as stand-alone chains or in complete kits, Cloyes timing chains are manufactured from premium materials, heat-treated, pre-stressed and engineered for a perfect chain-to-sprocket tooth fit – delivering quiet operation, durability, and OE-level performance you can count on. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

• Pre-stressed and heat-treated steel construction for increased strength, and wear resistance, delivering long-term durability even in high-stress environments
• Cloyes chains are engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, and maintaining accurate timing
• Designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
• Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
• Available in application-specific kit or as a stand-alone chain, offering installation flexibility and convenience
• Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component

ENGINE TIMING CHAIN

For optimal power transmission in the timing drive, we offer you repair solutions. Our components ensure the correct gear ratios and deliver high reliability paired with low maintenance costs.

ENG TIMNG CHAINTNSNR

Meets or exceeds OEM performance requirements.;Cloyes utilizes the latest in design And material technology, ensuring quiet And maintenance-free experience.

Product Features:

• Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
• Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
• CAD designed and manufactured using premium materials
• Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
• Refer to our online catalog for detailed application-specific information

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

• Precision-wound coated copper windings increase product durability and life cycle.
• Hard-coated and anodized spool valve to prevent corrosion and increase service life.
• Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
• Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

• Precision-wound coated copper windings increase product durability and life cycle.
• Hard-coated and anodized spool valve to prevent corrosion and increase service life.
• Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
• Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

Manufactured to meet critical OE quality fit, form and function requirements demanded by today’s vehicle manufacturers, Dayco’s timing component kit ensures long lasting peak performance. This kit is designed to replace worn or damaged original equipment timing belts, tensioners and idler pulleys. It includes pre-packaged tensioners, idler pulleys and instructions – each matched to a specific make, model and vehicle year.

Product Features:

• Engineered for the majority of domestic and import vehicle applications with a timing belt
• All components needed for a complete timing belt replacement included in one box
• Includes premium Dayco components and a tough, wear-resistant belt
• Meets or exceeds OE quality

This premium water pump uses new high-quality components and is designed to meet or exceed OE specifications. This pump is 100% tested to ensure quality. Bearings, gaskets, seals, impeller, hub and housing are all designed for long-lasting service life. All necessary gaskets and seals are included.

Product Features:

• Built to meet or exceed OE fit, form and function
• All components necessary for installation are supplied with pump
• 100% tested for reliable performance
• Follow all enclosed instructions to maximize pump life and validate warranty
• Additional Notes: Includes gasket

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Validated for fit, form and function
• Unsurpassed quality you can trust
• Includes all the parts necessary to complete the repair unless otherwise noted