Acura Integra Performance and Racing Products
Top Acura Integra Performance and Racing Products Categories
We carry over 44 Performance and Racing Products in inventory for the Acura Integra. If you’re looking for aftermarket Performance and Racing Products for your Acura Integra, check out all these categories:
Essential Acura Integra Performance and Racing Products
Energy Suspension – Sway Bar Bushing Set (Part No.16.5105G)
from
$11.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Strut Rod Bushing Set (Part No.16.7104R)
from
$29.99
These performance polyurethane components help reduce common wheel roll-under. This occurs when stopping abruptly, especially when using performance tires for both front of rear drive vehicles is so equipped. Replaces that original, short lived and too-soft O.E.M, rubber on front wheel drive vehicles – diminishes wheel hop and traction loss during standing start accelerations. Better maintains proper alignment under extreme conditions. Made of Energy’s Hyper-Flex performance polyurethane to add both performance and durability.
Product Features:
See More
Product Features:
- Made from HYPER-Flex Polyurethane
Energy Suspension – Tie Rod Dust Boot (Part No.9.13103G)
from
$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
K&N – Cold Air Intake: Adds Up To 6 Horsepower, With Million Mile Air Filter (Part No.57-3509)
from
$367.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
Energy Suspension – Trailing Arm Bushing Set (Part No.16.7106R)
from
$41.99
Product Features:
See More
- Help Maintain Proper Rear Toe and Caster
- During High Performance Driving Conditions
- Important When Using Larger Wheels/Tires
Energy Suspension – Sway Bar Bushing Set (Part No.16.5108G)
from
$11.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Edelbrock – Victor X Honda B16A & B18C5 Intake Manifold (Part No.4764)
from
$645.99
Excellent power throughout 7000 to 10000 RPM range. Includes secondary set of injector bosses. Extra bosses are for turbo or racing applications. Larger than stock plenum volume. Long 9 inch runner length. Extra volume and length for more power at high RPM. Ideal for normally aspirated and turbocharged engines.
Product Features:
See More
Product Features:
- Excellent Power Throughout 7K to 10000K RPM Range
- Includes Secondary Set Of Injector Bosses
- Extra Bosses Are For Turbo Or Racing Applications
- Larger Than Stock Plenum Volume
- Long 9 in. Runner Length
- Extra Volume And Length For More Power At High RPM
- Ideal For Normally Aspirated/ Turbocharged Engine
NOS/Nitrous Oxide Systems – Import Nitrous System Dry Design (Part No.05122NOS)
from
$1299.99
Import Nitrous System Dry Design
B & M – Manual Shifter, Precision Shifter, Acura, Honda (Part No.45047)
from
$139.99
B&M Precision aftermarket shifters; put one in your Honda Civic and find out what 50 plus years worth of engineering know-how can do for you. It features a 303 stainless steel stick and 30 percent reduction in throw for quicker more positive shifts.
Product Features:
See More
Product Features:
- Shortens Shifter Throw
- CNC Machined-303 Stainless Steel
- 6061-T6 Aluminum
- Billet 303 Stain. Steel Sticks
- Bearing Assembly In Aluminum Housing
Energy Suspension – Motor Mount Insert (Part No.16.1109R)
from
$35.99
Available for many popular sporty and performance front wheel drive vehicles. A real must to use for sport compact competition and performance uses. Helps reduce wheel hop and traction loss. Prevents damage to other vehicle components. Improves and even restores broken motor mounts. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluid oils, coolants and road contaminants.
Product Features:
See More
Product Features:
- Prevents Tearing of Original Soft Mount Material
- A Must-Use for High Performance Conditions
- Eliminates Excess Engine Movement
MSD Ignition – Distributor Cap and Rotor; Modified; Civic/Integra LS; 92-00 (Part No.82923)
from
$89.99
MSD’s Honda and Acura modified distributor kits are specially constructed to allow the use of a powerful external coil (blaster) series. Each cap is specially fitted with an MSD power tower to accept the high voltage of an MSD blaster coils.
Product Features:
See More
Product Features:
- Covert Honda Dist. To A Powerful External MSD Coil
- Cap Has A Coil Tower
- Includes A New Rotor
- Designed w/Performance In Mind
- Supplied w/8.5mm Coil Wire
- Low Resistance Terminals
Energy Suspension – Control Arm Bushing Set (Part No.16.3109R)
from
$50.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Control Arm Bushing Set (Part No.16.3105G)
from
$71.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Shock Bushing Set (Part No.16.8102R)
from
$30.99
Adds performance to any shock. Benefit from better durability over O.E.M. rubber bushings. Important to use for competition of any kind. Great for show vehicles – adds that finishing touch. Made of Energy’s Hyper-Flex performance polyurethane.
Product Features:
See More
Product Features:
- Made from HYPER-Flex Polyurethane
- Gives Shock Maximum Efficiency
- Add to the Performance of Every Shock
- Gives Instant Response/Control to Suspension
Energy Suspension – Hyper-Flex System (Part No.16.18105R)
from
$237.99
Product Features:
See More
- Incredible Improvement in Control
- Maintains Proper Caster and Camber Alignment
- Increase in Handling and Control
- Greatly Reduce Wheel Hop on Quick Acceleration
- Even Braking Control is Improved
- Better Suspension Stability
Energy Suspension – Hyper-Flex System (Part No.16.18105G)
from
$237.99
Product Features:
See More
- Incredible Improvement in Control
- Maintains Proper Caster and Camber Alignment
- Increase in Handling and Control
- Greatly Reduce Wheel Hop on Quick Acceleration
- Even Braking Control is Improved
- Better Suspension Stability
Energy Suspension – Ball Joint Dust Boot Set (Part No.16.13101G)
from
$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Lasts Longer
- Looks Great
Edelbrock – Intake Gasket for 1994-01 Acura Integra GSR B18C1 (Part No.15042)
from
$18.99
Product Features:
See More
- For Honda 1994-01
- Fits B18C1 Engine
- Found In 1994-2001 Integra GSR
- One Piece Configuration
- Green Color
Energy Suspension – Manual Transmission Shifter Stabilizer Bushing Set (Part No.16.1101R)
Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)
from
$54.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Acura Integra Performance and Racing Products Categories
Helping You Find the Right Performance and Racing Products for Your Acura Integra
You love your Integra. So we’ve made it easier than ever to help you find Acura Integra Performance and Racing Products in our online catalog. Our inventory holds 44 aftermarket and OEM Performance and Racing Products for your Acura Integra, ranging from $9.99 to $1,299.99.
We offer parts from 9 brands trusted to make quality Performance and Racing Products for your Acura Integra. Before you buy, take some time to read through customer reviews. We currently have 174 reviews of Acura Integra Performance and Racing Products from previous customers.
Find your Integra Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Acura Integra part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Performance and Racing Products Brands for Your Acura Integra
Our inventory holds Performance and Racing Products for your Acura Integra from 9 trusted brands. You’ll find OEM and aftermarket parts from brands like Energy Suspension, Accel, and MSD Ignition, all of which can keep that Acura happy.
We have MSD Ignition parts available for your Acura Integra in categories like Performance Distributors. Some of the top-rated MSD Ignition parts in these categories are:
from
$89.99
(2)
Distributor Cap and Rotor; Modified; Civic/Integra LS; 92-00
Performance Distributor Cap and Rotor Kits
Top-Rated Accel Performance and Racing Products
Leading Accel Performance and Racing Products
We carry Accel brand parts for your Acura Integra across several catalog categories, including Performance Distributors. Some of our most reviewed Accel parts include:
FAQs for Acura Integra Performance and Racing Products
What are the most purchased Performance and Racing Products for the Acura Integra?
Out of 44 Performance and Racing Products for the Acura Integra, the most popular in our inventory are:
from
$15.99
This product is not rated
Manual Transmission Shifter Stabilizer Bushing Set
Performance Shifter Components and Kits
