Acura Engine Cold Air Intakes

The K&N 69-0025TP Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Honda Accord VIII and Acura TSX models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smooths and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. The 69-0025TP air intake comes with a black rubber topped K&N high-flow air filter that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that’s made to last and it accommodates the factory EVAP vent hose, air temperature sensor and crank case vent hose. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, pliers and a ratchet set. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.

Product Features:

• Guaranteed to increase horsepower
• Designed to improve throttle response and engine sound
• Free-flowing aluminum tube
• Easy to install, usually in 90 minutes or less
• Lasts up to 100,000 miles before service is required (depending on driving conditions)
• Replaces entire factory air intake system
• Washable and reusable lifetime air filter
• No-Hassle Lifetime Limited Warranty

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.

Product Features:

• Guaranteed to increase horsepower and torque.
• Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
• Engineered to provide high airflow and exceptional filtration.
• Replaces factory air filter and intake tube.
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
• Typical installation can be completed in 60 minutes or less with simple hand tools.
• No-Hassle Lifetime Limited Warranty.
• Will not void vehicle warranty(limited)

The K&N 69-1009TP Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Acura RSX Type-S and Honda Civic SI or VI models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smooths and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. The 69-1009TP air intake comes with a black rubber topped K&N high-flow air filter that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that’s made to last and it accommodates the factory idle air bypass control thermal valve vent hose, air temperature sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.

Product Features:

• Guaranteed to increase horsepower
• Designed to improve throttle response and engine sound
• Free-flowing aluminum tube
• Easy to install, usually in 90 minutes or less
• Lasts up to 100,000 miles before service is required (depending on driving conditions)
• Replaces entire factory air intake system
• Washable and reusable lifetime air filter
• K&N Million Mile Limited Warranty

The K&N 69-0015TR Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Acura RSX and Honda CR-V models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smooths and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. The 69-0015TR air intake comes with a black rubber topped K&N high-flow air filter that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive red powder-coat finish that’s made to last and it accommodates the factory IA bypass control thermal valve, air temperature sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less.

Product Features:

• Guaranteed to increase horsepower
• Designed to improve throttle response and engine sound
• Free-flowing aluminum tube
• Easy to install, usually in 90 minutes or less
• Lasts up to 100,000 miles before service is required (depending on driving conditions)
• Replaces entire factory air intake system
• Washable and reusable lifetime air filter
• K&N Million Mile Limited Warranty

The K&N 69-0015TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Acura RSX and Honda CR-V models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smooths and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. The 69-0015TS air intake comes with a black rubber topped K&N high-flow air filter that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive silver powder-coat finish that’s made to last and it accommodates the factory IA bypass control thermal valve, air temperature sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less. ach vehicle and air intake.

Product Features:

• Guaranteed to increase horsepower
• Designed to improve throttle response and engine sound
• Free-flowing aluminum tube
• Easy to install, usually in 90 minutes or less
• Lasts up to 100,000 miles before service is required (depending on driving conditions)
• Replaces entire factory air intake system
• Washable and reusable lifetime air filter
• K&N Million Mile Limited Warranty

The AEM 21-784C Performance Cold Air Intake System produces horsepower And torque gains by replacing your vehicle’s restrictive factory air filter And air intake housing. This air intake system was designed, tuned And dyno-tested to fit specific Acura ILX models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration And performance. The air filter is located in the original air box location And is protected by a heat shield which is designed to reduce intake air temperature And increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine’s factory emissions control devices including the mass air flow sensor And PCV hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools And it is backed by AEM’s Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California And other states adopting California emission standards, while others are 50 state legal. View the 21-784C vehicle applications to determine the legal status for each vehicle.

The AEM Performance Cold Air Intake System produces horsepower And torque gains by replacing your vehicle’s restrictive factory air filter And air intake housing. This air intake system was designed, tuned And dyno-tested to fit specific models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration And performance. The air filter is located in the original air box space And is protected by a heat shield which is designed to reduce intake air temperature And increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine’s factory emissions control devices including the mass airflow sensor And breather tube. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools And it is backed by AEM’s Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California And other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.

Product Features:

• Guaranteed to increase horsepower and torque.
• Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
• Engineered to provide high airflow and exceptional filtration.
• Replaces factory air filter and intake tube.
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
• Typical installation can be completed in 60 minutes or less with simple hand tools.
• No-Hassle Lifetime Limited Warranty.
• Will not void vehicle warranty(limited)

Large Five Layer Performance Air Filter:_x000d_Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. This 7-1/2″ tall 360-degree radial flow air filter features a 4″ flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals.

Product Features:

• Sealed Housing Utilizes Factory Air Inlet and Auxiliary Air Inlet
• Washable and Reusable Pro 5R Air Filter for Maximum Performance
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation

Momentum Intake Kit

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 9″ tall 360-degree radial flow air filter features a 5″ flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A clear sight window allows for hassle-free filter inspection, without having to disassemble your system. Its auxiliary air inlet can be used to bring in additional air from the engine compartment, or can be closed with an included plug. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. An extension harness is included in the kit to accommodate the relocation of the Mass Air Flow (MAF) Sensor seamlessly. Stainless-steel clamps and a silicone coupling are included for strength and durability. Momentum intakes are designed with fewer parts for a fast and easy installation.

Product Features:

• Sealed Housing Captures Cool Air Directly From Factory Inlet
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation (Roughly 30 Minutes)
• Washable and Reusable Pro DRY S Air Filter for Maximum Convenience

Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. This 7.5″ tall 360-degree radial flow air filter features a 3.5″ flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A clear sight window allows for hassle-free filter inspection, without having to disassemble your system. Its auxiliary air inlet can be used to bring in additional air from the engine compartment or can be closed with an included plug. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. An extension harness is included in the kit to accommodate the relocation of the Mass Air Flow (MAF) Sensor seamlessly. Stainless-steel clamps and a silicone coupling are included for strength and durability. Momentum intakes are designed with fewer parts for a fast and easy installation.

Product Features:

• Sealed Housing Captures Cool Air Directly From Factory Inlet
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Dyno-Tuned Air Intake Tube
• Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation (Roughly 30 Minutes)
• Washable and Reusable Pro 5R Air Filter for Maximum Performance

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Product Features:

• Guaranteed to increase horsepower and torque
• Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
• Engineered to provide high airflow and exceptional filtration
• Replaces factory air filter and intake tube
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions
• Typical installation can be completed in 60 minutes or less with simple hand tools
• No-Hassle Lifetime Limited Warranty
• Will not void vehicle warranty(limited)

Takeda Intake System