2026 Ford F-350 Super Duty Exhaust Parts

Flow and Performance: This Large Bore-HD exhaust system is 100% hand MIG-welded and Constructed from 4″ mandrel-bent 409 stainless steel tubing for maximum flow. The smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s. A mitered merge collector is also incorporated to eliminate dead space that can cause turbulence and hinder flow. Perfect Fit: This system uses all factory mounting locations providing stability. Includes OE-style bayonet hangers which are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. Some cutting maybe required during install. Please see instruction sheet for Cab configuration for further details. 5″ Angle-Cut Rolled Edge Matte-Black Intercooled Clamp-On Tips: Finishing off the exhaust are dual side exit 5″ stainless steel intercooled clamp-on tips with a matte-black finish. A unique laser-cut aFe Power logo plate is riveted on for an aggressive style.

Product Features:

• Mandrel Bent 409 Stainless Steel Tubing
• Dual Side Exit
• Matte Black Stainless Steel Clamp On Tips
• Tips w/Laser Cut Stainless Steel aFe Power Plate

aFe is proud to introduce the MACH Force-Xp Cat-Back exhaust system. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 4″ mandrel-bent 409 stainless steel tubing and comes complete with free-flowing muffler, OE-style bayonet hangers, band clamps and necessary hardware for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with single gloss black 304 stainless steel, single wall slash cut tip for an aggressive style. Installation is a Snap: This MACH Force-Xp exhaust system use all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• Mandrel Bent Stainless Steel Tubing
• Free Flowing Muffler
• Smooth Curves
• Hassle Free Installation

When it comes to performance exhaust systems, most people are looking for three things: Power, sound,and quality. JBA Exhaust Systems deliver the best of all three, giving it both great looks and performance.One of the first performance upgrades typical

Product Features:

• JBA Performance Exhaust 40-2520 3″ Stainless Steel Exhaust System 01-03 Super Crew 4.6/5.4L
• Large diameter stainless steel mandrel-bent tube

Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 5 in. 409 Stainless Steel Tubing
• 7 in. Wrinkle Black Powder Coated Tip w/Laser Cut Age Badge
• Increased Flow And Performance
• High Quality Band Clamps

Interested in a new exhaust system? Check out the ATLAS DPF-Back exhaust system by aFe. This system is constructed from 5 in. mandrel-bent aluminized steel tubing. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. ATLAS exhaust systems are the perfect combination of performance, fit and value. All aFe exhaust systems are engineered and manufactured in out Corona, California manufacturing facility.

Product Features:

• 4 in. Aluminized Steel Tubing
• Dual 6 in. Polished Tips w/Laser Cut aFe Badges
• Increased Flow And Performance
• High Quality Band Clamps

Designed to provide maximum performance and maximum value our Performance Series features 100 Percent aluminized steel at a no nonsense price. These systems are designed to provide the MBRP performance and sound you have grown to love to those who are operating on a tight budget. Featuring a two piece tail pipe and bolt-on hangers these systems fit and perform just like our more expensive series at a price point that cannot be beaten. A performance exhaust system is much like a musical instrument. Quality engineering is important, hundreds of test Miles and hundreds of Hours are invested into every system to guarantee you the greatest sound. Durability and performance available from any exhaust system anywhere.

Product Features:

• The Lowest Bend Degree Angles And Smooth Mandrel Bends Mean That Exhaust Gases Have An Easier Path To The Tip, Move Faster And Reduce Exhaust Gas Temperatures
• Vehicle Maintains Optimal Operating Temperatures
• Fits Right The First Time. Rigorous Testing Procedures Ensure That Every Component Will Fit As Expected
• Each Kit Is Designed To Fit As Many Configurations Of The Same Vehicle As Possible
• 100 Percent Aluminized Steel
• Features A Two Piece Tail Pipe And Bolt-On Hangers
• Easy, Bolt-On Design, Makes Easy To Install

Interested in a new exhaust system? Check out the ATLAS DPF-Back exhaust system by aFe. This system is constructed from 5 in. mandrel-bent aluminized steel tubing. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. ATLAS exhaust systems are the perfect combination of performance, fit and value. All aFe exhaust systems are engineered and manufactured in out Corona, California manufacturing facility.

Product Features:

• 5 in. Aluminized Steel Tubing
• Increased Flow And Performance
• High Quality Band Clamps
• Bayonet OE Style/Welded-On Hangers

Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 4 in. Mandrel Bent 409 Stainless Steel Tubing
• Dual 6in. Polished Tips w/Laser Cut aFe Badges
• Increased Flow And Performance
• High Quality Band Clamps

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.

Product Features:

• 3.5 in. Mandrel Bend 409 Stainless Steel Tubing
• 34% Flow Gain
• Free Flow Muffler
• OE Style/Welded-On Hangers

aFe is proud to introduce the MACH Force-Xp Cat-Back exhaust system. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 4″ mandrel-bent 409 stainless steel tubing and comes complete with free-flowing muffler, OE-style bayonet hangers, band clamps and necessary hardware for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with single gloss black 304 stainless steel, single wall slash cut tip for an aggressive style. Installation is a Snap: This MACH Force-Xp exhaust system use all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• Mandrel Bent Stainless Steel Tubing
• Free Flowing Muffler
• Smooth Curves
• Hassle Free Installation

Interested in a new exhaust system for you 6.7L Power Stroke. Check out the ATLAS DPF-Back exhaust system by aFe. Constructed from 5 in. mandrel-bent aluminized steel tubing for maximum flow and uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. Also included is a massive 7 in. wrinkle-black powder-coated 304 stainless steel tip with laser-cut stainless steel aFe power badge. The tip features a drain port on the bottom to keep rust and corrosion away. A unique stainless steel laser-cut aFe Power logo plate is rived on for an aggressive style. High quality OE-style flange and band clamps are used for a complete 360 degree sealing surface. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

Product Features:

• 5 in. Aluminized Steel Tubing
• 7 in. Wrinkle Black Powder Coated Tip w/Laser Cut Age Badge
• OE Style Flanges
• High Quality Band Clamps

The MagnaFlow Custom Builder Pipe Series Turbo-Back Performance Exhaust 17878 utilizes a weight-optimized, emissions-legal design engineered to enhance your diesel truck with our signature resonant sound and dyno-proven performance. This turbo-back 4in. diameter Custom Builder Pipe kit is made of durable, corrosion resistant stainless steel and produced using CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited warranty. Exhaust kit 17878’s mandrel bent pipes have been tuned to produce Aggressive interior and Very Aggressive exterior sound levels. The system terminates in a Single Passenger Side Rear exit. Professional installation is recommended due to the possible cutting, welding and fabrication required.

Product Features:

• Layout, placement, orientation and exhaust note are yours to craft as you see fit
• Features all components necessary to enable flexible installation options
• Attention grabbing design thanks to an aggressive style

Interested in a new exhaust system for your 6.7 L Power Stroke. Check out the ATLAS DPF-Back exhaust system by aFe. Constructed from 5 in. mandrel-bent aluminized steel tubing for maximum flow and uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. Also included is a massive 7 in. wrinkle-black powder-coated 304 stainless steel tip with laser-cut stainless steel aFe power badge. The tip features a drain port on the bottom to keep rust and corrosion away. A unique stainless steel laser-cut aFe Power logo plate is rived on for an aggressive style. High quality OE-style flange and band clamps are used for a complete 360 degree sealing surface. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

Product Features:

• Mandrel Bent Aluminized Steel Tubing
• High Quality Band Clamp/OE Style Bayonet Hangers For Secure Fit
• Utilizes All Factory Mounting Locations
• Quick Hassle Free Installation

Interested in a new exhaust system? Check out the ATLAS DPF-Back exhaust system by aFe. This system is constructed from 5 in. mandrel-bent aluminized steel tubing. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. ATLAS exhaust systems are the perfect combination of performance, fit and value. All aFe exhaust systems are engineered and manufactured in out Corona, California manufacturing facility.

Product Features:

• 5 in. Aluminized Steel Tubing
• Increased Flow And Performance
• High Quality Band Clamps
• Bayonet OE Style/Welded-On Hangers

Interested in a new exhaust system. Check out the ATLAS DPF-Back Exhaust system form aFe. This system is constructed from 5 in. mandrel-bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Uses high quality band clamps and OE-style bayonet hangers. Uses all factory mounting locations to provide a quick, hassle-free installation. Includes a massive 6 in. polished 304 stainless tip with a laser-cut stainless steel aFe power badge. Tip features a drain port on the bottom to keep rust and corrosion away. High quality OE-style flange and band clamps are used for a complete 360 degree sealing surface. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

Product Features:

• 5 in. Aluminized Steel Tubing
• 7 in. Polished Tip w/Laser Cut Age Badge
• OE Style Flanges
• High Quality Band Clamps

Designed to provide maximum performance and maximum value our Performance Series features 100 Percent aluminized steel at a no nonsense price. These systems are designed to provide the MBRP performance and sound you have grown to love to those who are operating on a tight budget. Featuring a two piece tail pipe and bolt-on hangers these systems fit and perform just like our more expensive series at a price point that cannot be beaten. A performance exhaust system is much like a musical instrument. Quality engineering is important, hundreds of test Miles and hundreds of Hours are invested into every system to guarantee you the greatest sound. Durability and performance available from any exhaust system anywhere.

Product Features:

• The Lowest Bend Degree Angles And Smooth Mandrel Bends Mean That Exhaust Gases Have An Easier Path To The Tip, Move Faster And Reduce Exhaust Gas Temperatures
• Vehicle Maintains Optimal Operating Temperatures
• Fits Right The First Time. Rigorous Testing Procedures Ensure That Every Component Will Fit As Expected
• Each Kit Is Designed To Fit As Many Configurations Of The Same Vehicle As Possible
• 100 Percent Aluminized Steel
• Features A Two Piece Tail Pipe And Bolt-On Hangers
• Easy, Bolt-On Design, Makes Easy To Install

Force II Kit

The MagnaFlow Street Series Cat-Back Performance Exhaust System 19174 brings out the personality of your 6.2L 2011-2016 Ford with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3.5in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 5in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Ford exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19174 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19174 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited finish warranty and limited construction warranty.

Product Features:

• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques
• Dyno-proven performance

The Large Bore HD Performance DPF-Back exhaust features 4″ 409 stainless steel tubing with smooth curves and increased size to help remove restriction and keeps exhaust gasses flowing smoothly. The OE style band-clamps and bayonet style hangers make sure this system installs cleanly and easily.

Product Features:

• 4 in. Mandrel Bent 409 Stainless Steel Tubing
• Maximum Flow
• High Flow Muffler
• Lower EGTs

Interested in a new exhaust system. Check out the ATLAS DPF-Back Exhaust system form aFe. This system is constructed from 5 in. mandrel-bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Uses high quality band clamps and OE-style bayonet hangers. Uses all factory mounting locations to provide a quick, hassle-free installation. Includes a massive 6 in. polished 304 stainless tip with a laser-cut stainless steel aFe power badge. Tip features a drain port on the bottom to keep rust and corrosion away. High quality OE-style flange and band clamps are used for a complete 360 degree sealing surface. Al l aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

Product Features:

• 5 in. Aluminized Steel Tubing
• 7 in. Wrinkle Black Powder Coated Tip w/Laser Cut Age Badge
• OE Style Flanges
• High Quality Band Clamps

aFe POWER’s Rebel XD Series DPF-back exhaust system performs as good as it looks. Made with 4″ mandrel bent 409 stainless steel tubing to improve exhaust flow for more HP, torque and lower EGT’s. The Rebel XD is MIG welded for durability and includes high quality hardware to provide a quick, hassle-free installation. Finished with dual 5″ polished stainless steel tips with intercooling vents make it the perfect combination of performance, value and style.

Product Features:

• MIG Welded
• Factory Mounting Locations
• High Quality Band Clamps

This Mach FORCE Xp exhaust system is constructed of 5″ mandrel-bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s.

Product Features:

• 4 in. Mandrel Bent 409 Stainless Steel Tubing
• Maximum Flow
• High Flow Muffler
• Bayonet Style Hangers For Easy Installation

Interested in a new exhaust system? Check out the ATLAS DPF-Back exhaust system by aFe. This system is constructed from 5 in. mandrel-bent aluminized steel tubing. Smooth transition bends allow for low turbulence, increasing horsepower, toque and lowering EGTs. Uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. Also included in this exhaust system is a massive 7 in. wrinkle-black powder-coated tip with a laser-cut stainless steel aFe power badge. Tip features a drain port on the bottom to keep rust and corrosion away. ATLAS exhaust systems are the perfect combination of performance, fit and value. High quality OE-style flange and band clamps are used for a complete 360 degree sealing surface. All aFe systems are engineered and manufactured in our Corona, California manufacturing facility.

Product Features:

• 5 in. Aluminized Steel Tubing
• 7 in. Wrinkle Black Powder Coated Tip w/Laser Cut Age Badge
• OE Style Flanges
• High Quality Band Clamps

Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 5 in. 409 Stainless Steel Tubing
• Increased Flow And Performance
• High Quality Band Clamps
• Bayonet OE Style/Welded-On Hangers

Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 5 in. 409 Stainless Steel Tubing
• 7 in. Polished Tip w/Laser Cut Age Badge
• Increased Flow And Performance
• High Quality Band Clamps

When it comes to performance exhaust systems, most people are looking for three things: Power, sound,and quality. JBA Exhaust Systems deliver the best of all three, giving it both great looks and performance.One of the first performance upgrades typical

Product Features:

• JBA Performance Exhaust 40-2522 3″ Stainless Steel Exhaust System 98-03 F-150 All 4.2/4.6/5.4L
• Large diameter stainless steel mandrel-bent tube

Rugged and dependable our XP series is made of T409 stainless steel. It designed and built to stand up to the harshest road condition. We are so sure that our XP series has what it take that we have given it an amazing lifetime warranty. That is absolutely the best warranty for a T409 system in the industry. A performance exhaust system is much like a musical instrument. Quality engineering is important, hundred of test Mile and hundred of Hour are invested into every system to guarantee you the greatest sound. Durability and performance available from any exhaust system anywhere.

Product Features:

• The Lowest Bend Degree Angle And Smooth Mandrel Bend Mean That Exhaust Gas Have An Easier Path To The Tip, Move Faster And Reduce Exhaust Gas Temperature
• Vehicle Maintain Optimal Operating Temperature
• Fit Right The First Time. Rigorous Testing Procedure Ensure That Every Component Will Fit As Expected
• Each Kit Is Designed To Fit As Many Configuration Of The Same Vehicle As Possible
• Designed And Built To Stand Up To The Harshest Road Condition
• Constructed From T409 Stainless Steel
• Easy, Bolt On Design, Make Easy To Install
• Limited Lifetime Warranty

Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 4 in. Mandrel Bent 409 Stainless Steel Tubing
• DPF/CAT-Delete
• No Bungs
• Bayonet OE Style/Welded-On Hangers