2026 Chevrolet Corvette TPMS Sensors

The MX-Sensor 1-Sensor Bulk Box has 20 individually bagged, programmable universal TPMS sensors. The 1-Sensor features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• Bulk Box of (20) Individually Bagged 1-Sensors with Rubber Press-in Valve
• Combined Frequency: 315MHz & 433MHz
• Programmable with Autel TPMS Service Tools
• Exclusive Press Release Button to Easily Replace Valve Stems
• Program to Replace 99% of OE Sensors
• Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
• Meets SAE Standards J1205 & J1206
• Maximum Signal Strength / Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

ACDelco GM Original Equipment Tire Pressure Monitoring Sensors (TPMS) are battery powered sensors located in the tire that monitor the vehicle’s tire pressure and warn the driver when pressure falls more than 25% below the manufacturer’s recommendations (normally through a slow pressure loss), and are GM-recommended replacements for your vehicle’s original components. The sensor is connected with the valve stem and, by way of Radio Frequency (RF) technology, sends pressure updates to the vehicle’s on-board computer. Tire pressure is displayed on the vehicle’s Driver Information Center (DIC) or, when low, a warning light may be illuminated to warn the driver. U.S. Federal Regulations require that new cars and light trucks be equipped with TPMS starting in 2008. These original equipment tire pressure monitoring sensors have bn manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
• Battery is made to last up to 10 years of normal use
• Designed to communicate perfectly with your GM vehicle’s TPMS Module
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

The 300050 is a convenient bulk box of 240 individually bagged Autel MX-Sensor 1-Sensors. The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• Bulk Box of (240) Individually Bagged 1-Sensors with Rubber Press-in Valve
• Bulk Box of 240 Individually Bagged 1-Sensors with Rubber Press-in Valve
• Combined Frequency 315MHz and 433MHz
• Programmable with Autel TPMS Service Tools
• Program to Replace 99% of OE Sensors
• Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
• Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
• Maximum Signal Strength / Battery Reliability
• Maximum Signal Strength, Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Huf Baolong Electronics (BH Sens) provides the market with OE Equivalent replacement sensors that function exactly like the OE sensor being replaced. The replacement tire sensors can be installed directly without programming, just relearn the sensors to the vehicle with a TPMS tool after install.

Product Features:

• Ready out of the box – no programming required
• Equivalent in function and quality of the OE Sensor
• Quick and easy installation. Only need to relearn to vehicle upon installation.
• Full WAL and PAL technology support for auto-locate.
• Valve included.

Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:

• MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
• COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
• FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
• DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
• COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Product Features:

• Chrome Grey Metal Press-in Valve Stem
• Compatible with Autel 1-Sensor
• Warranty on Material and Workmanship

Professional installation is strongly suggested

Product Features:

• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:

• MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
• COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
• FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
• DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
• COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Schrader is the leading global manufacturer of tire pressure monitoring systems (TPMS), and its direct OE TPMS technology can be found in over 50% of vehicles globally. Matching OE quality and performance standards, Schrader sensors undergo extensive OE quality testing, including high speed and extreme temperature tests. Schrader’s global presence as the leading OE supplier means that OE quality and performance come standard with Schrader’s genuine OE replacement sensors. TPMS sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability.

Product Features:

• DIRECT REPLACEMENT: 1 for 1 replacement sensor
• QUICK AND EASY: TPMS sensors are ready out of the box
• VEHICLE FITMENT: Preprogrammed to the specific make, model, and year of a vehicle
• SCHRADER QUALITY: TPMS sensors are produced in Schraders secure and highly automated OE manufacturing facilities
• RELEARN PROCEDURE: A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability

Schrader is the leading global manufacturer of tire pressure monitoring systems (TPMS), and its direct OE TPMS technology can be found in over 50% of vehicles globally. Matching OE quality and performance standards, Schrader sensors undergo extensive OE quality testing, including high speed and extreme temperature tests. Schrader’s global presence as the leading OE supplier means that OE quality and performance come standard with Schrader’s genuine OE replacement sensors. TPMS sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability.

Product Features:

• DIRECT REPLACEMENT: 1 for 1 replacement sensor
• QUICK AND EASY: TPMS sensors are ready out of the box
• VEHICLE FITMENT: Preprogrammed to the specific make, model, and year of a vehicle
• SCHRADER QUALITY: TPMS sensors are produced in Schraders secure and highly automated OE manufacturing facilities
• RELEARN PROCEDURE: A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

This dual-frequency Dorman MULTi-FIT TPMS sensor covers 95% of the vehicles on the road today, including European models not covered in many competitors’ TPMS programs. Using our 974-505 MULTi-FIT II tool, the sensor can be programmed for both 315MHz and 433MHz applications on specified vehicles. The MULTi-FIT II tool can precisely and rapidly calibrate this sensor by vehicle specifications or clone it to match the sensor it’s replacing. The versatility, ease of installation and unrivaled range of vehicle coverage makes this sensor the perfect single-source repair solution. Manufactured by a brand known for more than a century for engineering excellence and quality assurance, you can install it with confidence, knowing it’s backed by a warranty you can trust. (MULTi-FIT II tool sold separately; part number 974-505).

Product Features:

• Versatile replacement – this dual-frequency programmable TPMS sensor can replace a failed sensor on vehicles with tire pressure monitoring systems that operate on both 315 MHz and 433MHz frequencies
• Programming required – easily calibrate this sensor with a Dorman MULTi-FIT II tool (sold separately, part number 974-505) by vehicle specifications or by cloning it to match the sensor it’s replacing
• Direct replacement – this sensor is engineered to match the fit and function of original equipment wheels and tires, and many, but not all aftermarket wheels and tires; check fit before installing
• Premium quality – communicating proper tire pressure is critical, and this sensor is backed by a brand with more than a century of engineering excellence and quality, with a warranty you can trust

Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:

• MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
• COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
• FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
• DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
• COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
• ADJUSTABLE: 0-40 degree adjustable stem fits into more aftermarket rim sets
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum screw-in valve stems. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 & J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• Maximum Signal Strength, Battery Reliability.
• 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
• Combined Frequency – 315MHz and 433MHz
• Programmable with Autel TPMS Service Tools
• Program to Replace 99 Percent of OE Sensors
• Meets SAE Standards J1205 and J1206
• Maximum Signal Strength, Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

The MXSensorRVK is a box of four press-in rubber valve stems. They are compatible with Autel 1-Sensors & Autel 315MHz & 433 MHz MX-Sensors.

Product Features:

• Includes 4 Rubber Press-in Valve Stems
• Compatible with Autel 1-Sensors
• Compatible with Autel 315MHz & 433MHz MX-Sensors
• Warranty on Material and Workmanship
• High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing

REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now, and into the future we will be there for you, our customer.

Product Features:

• Installs right out of the box
• No sensor programing required
• Works with all major TPMS scan tools
• No training required – designed to follow existing OE vehicle relearn procedures
• Faster TPMS scan tool hunt mode
• Reduces SKUs
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Schrader EZ-sensor Programmable TPMS sensor headlines the TPMS product offerings from Schrader TPMS Solutions. Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com – For more information about Schrader and its products visit: www.SchraderTPMS.com.

Product Features:

• EZ-sensor must be programmed to specific M/M/Y vehicle.
• EZ-sensor Programmable TPMS sensor fits 99% of vehicles on the road
• EZ-sensor can be programmed by most all TPMS programming tools on the Market
• Supports 314.9, 315 and 433 MHz sensor applications
• Always keep your TPMS scan and programming tool up to date with the latest software
• Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
• Aluminum valve can be replaced by Schrader service kit 20049
• Nut Torque = 71 in-lbs
• Valve Core Torque = 3.5 in-lbs

Schrader is the leading global manufacturer of tire pressure monitoring systems (TPMS), and its direct OE TPMS technology can be found in over 50% of vehicles globally. Matching OE quality and performance standards, Schrader sensors undergo extensive OE quality testing, including high speed and extreme temperature tests. Schrader’s global presence as the leading OE supplier means that OE quality and performance come standard with Schrader’s genuine OE replacement sensors. TPMS sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability.

Product Features:

• DIRECT REPLACEMENT: 1 for 1 replacement sensor
• QUICK AND EASY: TPMS sensors are ready out of the box
• VEHICLE FITMENT: Preprogrammed to the specific make, model, and year of a vehicle
• SCHRADER QUALITY: TPMS sensors are produced in Schraders secure and highly automated OE manufacturing facilities
• RELEARN PROCEDURE: A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• Combined Frequency: 315MHz & 433MHz
• Programmable with Autel TPMS Service Tools
• Exclusive Press Release Button to Easily Replace Valve Stems
• Program to Replace 99% of OE Sensors
• Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
• Meets SAE Standards J1205 & J1206
• Maximum Signal Strength / Battery Reliability
• 100% ID clone-able with no relearn required
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Schrader EZ-sensor Programmable TPMS sensor headlines the TPMS product offerings from Schrader TPMS Solutions. Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com. For more information about Schrader and its products visit: www.SchraderTPMS.com

Product Features:

• EZ-sensor must be programmed to specific M/M/Y vehicle
• EZ-sensor Programmable TPMS sensor fits 99% of vehicles on the road
• EZ-sensor can be programmed by most all TPMS programming tools on the Market
• Supports 314.9, 315 and 433 MHz sensor applications
• Always keep your TPMS scan and programming tool up to date with the latest software
• Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
• Rubber Valve can be replaced by rubber valve kit 20018 or aluminum valve kit 34000
• Valve Core Torque = 3.5 in-lbs (0.4 Nm)

Schrader is the leading global manufacturer of tire pressure monitoring systems (TPMS), and its direct OE TPMS technology can be found in over 50% of vehicles globally. Matching OE quality and performance standards, Schrader sensors undergo extensive OE quality testing, including high speed and extreme temperature tests. Schrader’s global presence as the leading OE supplier means that OE quality and performance come standard with Schrader’s genuine OE replacement sensors. TPMS sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability.

Product Features:

• DIRECT REPLACEMENT: 1 for 1 replacement sensor
• QUICK AND EASY: TPMS sensors are ready out of the box
• VEHICLE FITMENT: Preprogrammed to the specific make, model, and year of a vehicle
• SCHRADER QUALITY: TPMS sensors are produced in Schraders secure and highly automated OE manufacturing facilities
• RELEARN PROCEDURE: A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

The CV-001 is a black metal press-in valve stem for the 1-Sensor.

Product Features:

• Black Metal Press-in Valve Stem
• Compatible with Autel 1-Sensor

The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber screw-in valve stems. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
• 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
• Combined Frequency – 315MHz and 433MHz
• Programmable with Autel TPMS Service Tools
• Program to Replace 99 Percent of OE Sensors
• Maximum Signal Strength / Battery Reliability
• Maximum Signal Strength, Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Professional installation is strongly suggested

Product Features:

• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

ACDelco GM Original Equipment Tire Pressure Monitoring Sensors (TPMS) are battery powered sensors located in the tire that monitor the vehicle’s tire pressure and warn the driver when pressure falls more than 25% below the manufacturer’s recommendations (normally through a slow pressure loss), and are GM-recommended replacements for your vehicle’s original components. The sensor is connected with the valve stem and, by way of Radio Frequency (RF) technology, sends pressure updates to the vehicle’s on-board computer. Tire pressure is displayed on the vehicle’s Driver Information Center (DIC) or, when low, a warning light may be illuminated to warn the driver. U.S. Federal Regulations require that new cars and light trucks be equipped with TPMS starting in 2008. These original equipment tire pressure monitoring sensors have bn manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
• Battery is made to last up to 10 years of normal use
• Designed to communicate perfectly with your GM vehicle’s TPMS Module
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 & J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• Combined Frequency: 315MHz and 433MHz
• Programmable with Autel TPMS Service Tools
• Exclusive Press Release Button to Easily Replace Valve Stems
• Program to Replace 99% of OE Sensors
• Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
• Meets SAE Standards J1205 & J1206
• Maximum Signal Strength / Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

The CV-002 is a titan grey metal press-in valve stem for the 1-Sensor.

Product Features:

• Titan Grey Metal Press-in Valve Stem
• Compatible with Autel 1-Sensor

ACDelco GM Original Equipment Tire Pressure Monitoring Sensors (TPMS) are battery powered sensors located in the tire that monitor the vehicle’s tire pressure and warn the driver when pressure falls more than 25% below the manufacturer’s recommendations (normally through a slow pressure loss), and are GM-recommended replacements for your vehicle’s original components. The sensor is connected with the valve stem and, by way of Radio Frequency (RF) technology, sends pressure updates to the vehicle’s on-board computer. Tire pressure is displayed on the vehicle’s Driver Information Center (DIC) or, when low, a warning light may be illuminated to warn the driver. U.S. Federal Regulations require that new cars and light trucks be equipped with TPMS starting in 2008. These original equipment tire pressure monitoring sensors have bn manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• This part requires programming andor special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
• Battery is made to last up to 10 years of normal use
• Designed to communicate perfectly with your GM vehicle┐s TPMS Module
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now, and into the future we will be there for you, our customer.

Product Features:

• Installs right out of the box
• No sensor programing required
• Works with all major TPMS scan tools
• No training required – designed to follow existing OE vehicle relearn procedures
• Faster TPMS scan tool hunt mode
• Reduces SKUs
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors