2024 Ram 2500 Exhaust Parts

Essential 2024 Ram 2500 Exhaust Parts

aFe POWER – Large Bore-HD DPF Back Exhaust System: No Tip, 409 Stainless Steel, Unleashes All Available HP (Part No.49-42016)

Large Bore-HD DPF Back Exhaust System: No Tip, 409 Stainless Steel, Unleashes All Available HP

from

$585.99
Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:
  • 5 in. 409 Stainless Steel Tubing
  • Increased Flow And Performance
  • High Quality Band Clamps
  • Bayonet OE Style/Welded-On Hangers
See More

aFe POWER – Large Bore-HD DPF Back Exhaust System: Black Tip, 409 Stainless Steel, Unleashes All Available HP (Part No.49-42006-B)

Large Bore-HD DPF Back Exhaust System: Black Tip, 409 Stainless Steel, Unleashes All Available HP

from

$505.99
Gain 22% more exhaust flow for improved performance and sound. This DPF-back exhaust is 100% hand MIG-welded, mandrel bent, 4″ 409 stainless steel tubing for strength and durability and is finished off with a 5″ intercooled, polished exhaust tip to reduce EGT’s. This system utilizes factory mounting locations, and includes high quality hardware for a quick, hassle-free installation. Stainless Steel Construction This DPF-Back is constructed of 100% hand MIG-welded, mandrel bent, 4″ 409 stainless steel tubing for strength and durability. 5″ Diameter Exhaust Tip: Finishing off this exhaust is a 5″ diameter slash cut, stainless steel tip with intercooling vents to reduce EGT’s at the tailpipe and are badged with laser-cut aFe POWER plates riveted on. Installation is a Snap This system uses factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 degree sealing surface. Flow and Performance This exhaust system is constructed of 4″ mandrel-bent 409 stainless steel tubing for maximum flow and durability. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s.

Product Features:
  • 100% MIG Welded
  • Quality Hardware
See More

aFe POWER – Rebel Series Turbo Back Exhaust System: Polished Tip, 409 Stainless Steel, Gain up to 18 HP (Part No.49-42057-P)

Rebel Series Turbo Back Exhaust System: Polished Tip, 409 Stainless Steel, Gain up to 18 HP

from

$1052.99
aFe POWER introduces an all new Rebel Series dual middle-side exit exhaust system for the 2014-2017 RAM 2500/3500 with V8-6.4L HEMI engine. This Rebel Series cat-back is designed with dual polished exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with unique laser-etched aFe POWER logos on the side and are constructed from 304 stainless steel for durability. The exhaust system is constructed from 3-1/2″ MIG-welded, mandrel bent 409 stainless steel tubing for maximum flow, increased horsepower and torque. This kit uses a free-flowing muffler to absorb high pitch tones producing a powerful sound. The performance cat-back exhaust system includes necessary hardware and clamps for a hassle-free install, with no cutting required making it a true bolt on system. 4″ Dia. Polished Middle-Side Exit Tips: Finishing off the exhaust are dual 4″ diameter polished 304 stainless steel clamp-on tips with a laser-etched aFe POWER logo on the side for an aggressive style. The tips are designed to exit from in front of the rear passenger side tire for a unique custom look. Installation Is A Snap: This Rebel Series exhaust system uses factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. This makes for an easy installation with no cutting required.

Product Features:
  • Mandrel Bent 409 Stainless Steel Tubing
  • High Flow Stainless Steel Muffler
  • Very Aggressive Sound
  • Bayonet Style Hangers For Secure Fit
See More

Flowmaster Inc. – Cat-back System 409S – Dual Rear or Side Exit – American Thunder -Moderate Sound (Part No.817647)

Cat-back System 409S - Dual Rear or Side Exit - American Thunder -Moderate Sound

from

$927.99
Cat-back System 409S – Dual Rear or Side Exit – American Thunder -Moderate Sound

MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15333)

Street Series Cat-Back Performance Exhaust System

from

$1247.99
The MagnaFlow Street Series Cat-Back Performance Exhaust System 15333 brings out the personality of your 6.4L 2014-2023 Ram with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3.5in. main piping and 1 Straight-Through mufflers ending in a Dual Same Side Behind Passenger Rear Tire exit with 5in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Ram exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ram’s to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15333 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15333 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:
  • Dyno-proven performance
  • Durable corrosion-resistant stainless steel construction
  • CNC precision robotic manufacturing techniques
See More

aFe POWER – MACH Force-Xp Cat Back Exhaust System: Black Tip, 409 Stainless Steel, Unleashes All Available HP (Part No.49-42056-B)

MACH Force-Xp Cat Back Exhaust System: Black Tip, 409 Stainless Steel, Unleashes All Available HP

from

$1052.99
aFe is proud to introduce the MACH Force-Xp Cat-Back exhaust system. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 4″ mandrel-bent 409 stainless steel tubing and comes complete with free-flowing muffler, OE-style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with single gloss black 304 stainless steel, double wall slash cut tips for an aggressive style. Installation is a Snap: This MACH Force-Xp exhaust system use all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality OE-style flange and band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:
  • Mandrel Bent Stainless Steel Tubing
  • Free Flowing Muffler
  • Smooth Curves
  • Hassle Free Installation
See More

aFe POWER – ATLAS DPF Back Exhaust System: Polished Tip, Aluminized Steel, Unleashes All Available HP (Part No.49-02051-1P)

ATLAS DPF Back Exhaust System: Polished Tip, Aluminized Steel, Unleashes All Available HP

from

$457.99
The Large Bore HD Performance DPF-Back exhaust features 4″ 409 stainless steel tubing with smooth curves and increased size to help remove restriction and keeps exhaust gasses flowing smoothly. The OE style band-clamps and bayonet style hangers make sure this system installs cleanly and easily.

Product Features:
  • Aggressive Sound
  • Street Legal
  • Includes High Quality Band Clamps
  • Direct Bolt On
See More

MBRP Exhaust – T-304 Ss, 4" Pipe Diameter, Single Exhaust With Single Exit, 5" Ss Tip (Part No.S5149304)

T-304 Ss, 4" Pipe Diameter, Single Exhaust With Single Exit, 5" Ss Tip

from

$897.99
PRO Series is the best performance exhaust system that money can buy. It is a series designed and built for the serious enthusiast who will settle for nothing less. Constructed from T304 stainless steel it delivers you optimal durability that keeps on looking its best. Easy to clean and maintain this is the product of choice for owners of lifted vehicles, show trucks or who operate in severe environments.

Product Features:
  • 4 Inch Cat Back Single Side Exit (Street Version) Exhaust System
  • 4 Inch Mandrel Bent Tubing
  • Moderate Sound Level
  • Bolt-On, No Weld Design Makes Installation A No Hassle One And A Half To Two-Hour Project
See More

Borla Performance Exhaust – T-304 Ss, 3.5" Dia, Single Exhaust With Single Exit, Single Passenger Side 5" Round (Part No.140801BC)

T-304 Ss, 3.5" Dia, Single Exhaust With Single Exit, Single Passenger Side 5" Round

from

$1016.99
The Borla (R) Cat-Back (TM) Name Implies The Exhaust System Is Located Behind The Factory Catalytic Converter Where There Factory Emissions Remain Untouched And Vehicle Stays Emissions Compliant. This Remains Distinct From The Axle Back Exhaust System that Is Located Behind The Rear Axle.

Product Features:
  • Increases The Overall Sound Level And Performance
  • Cat-Back (TM) Performance Exhaust System Replaces The Factory Exhaust System Following The Same Exhaust Path And Secured Using The Original Vehicle Hangars And Rubber Isolators
  • Pioneered The Automotive Exhaust Aftermarket In Exhausts Constructed In Aircraft Grade 304 Stainless Steel Tubing, A Material With Higher Content Of Carbon And Nickel That Will Not Rust Or Corrode
  • Easy Bolt-On Installation
  • Aggressive S-Type Sound Under Acceleration, No Drone At Highway Speeds
See More

aFe POWER – Large Bore-HD DPF Back Exhaust System: Polished Tip, 409 Stainless Steel, Unleashes All Avail. HP (Part No.49-42039-P)

Large Bore-HD DPF Back Exhaust System: Polished Tip, 409 Stainless Steel, Unleashes All Avail. HP

from

$585.99
Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:
  • 5 in. 409 Stainless Steel Tubing
  • 7 in. Polished Tip w/Laser Cut Age Badge
  • Increased Flow And Performance
  • High Quality Band Clamps
See More

aFe POWER – ATLAS DPF Back Exhaust System: No Tip, Aluminized Steel, Unleashes All Available HP (Part No.49-02039)

ATLAS DPF Back Exhaust System: No Tip, Aluminized Steel, Unleashes All Available HP

from

$505.99
Interested in a new exhaust system? Check out the ATLAS DPF-Back exhaust system by aFe. This system is constructed from 5 in. mandrel-bent aluminized steel tubing. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. ATLAS exhaust systems are the perfect combination of performance, fit and value. All aFe exhaust systems are engineered and manufactured in out Corona, California manufacturing facility.

Product Features:
  • 5 in. Aluminized Steel Tubing
  • 7 in. Wrinkle Black Powder Coated Tip w/Laser Cut Age Badge
  • OE Style Flanges
  • High Quality Band Clamps
See More

aFe POWER – Rebel Series Turbo Back Exhaust System: Black Tip, 409 Stainless Steel, Gain up to 18 HP (Part No.49-42057-B)

Rebel Series Turbo Back Exhaust System: Black Tip, 409 Stainless Steel, Gain up to 18 HP

from

$1160.99
aFe POWER introduces an all new Rebel Series dual middle-side exit exhaust system for the 2014-2017 RAM 2500/3500 with V8-6.4L HEMI engine. This Rebel Series cat-back is designed with dual black exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with unique laser-etched aFe POWER logos on the side and are constructed from 304 stainless steel for durability. The exhaust system is constructed from 3-1/2″ MIG-welded, mandrel bent stainless steel tubing for maximum flow, increased horsepower and torque. This kit uses a free-flowing muffler to absorb high pitch tones producing a powerful sound. The performance cat-back exhaust system includes necessary hardware and clamps for a hassle-free install, with no cutting required making it a true bolt on system. 4″ Dia. Black Middle-Side Exit Tips: Finishing off the exhaust are dual 4″ diameter black 304 stainless steel clamp-on tips with a laser-etched aFe POWER logo on the side for an aggressive style. The tips are designed to exit from in front of the rear passenger side tire for a unique custom look. Installation Is A Snap: This Rebel Series exhaust system uses factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. This makes for an easy installation with no cutting required.

Product Features:
  • Mandrel Bent 409 Stainless Steel Tubing
  • High Flow Stainless Steel Muffler
  • Very Aggressive Sound
  • Bayonet Style Hangers For Secure Fit
See More

aFe POWER – Large Bore-HD DPF Back Exhaust System: No Tip, 409 Stainless Steel, Unleashes All Available HP (Part No.49-42039)

Large Bore-HD DPF Back Exhaust System: No Tip, 409 Stainless Steel, Unleashes All Available HP

from

$585.99
Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:
  • 5 in. 409 Stainless Steel Tubing
  • 7 in. Polished Tip w/Laser Cut Age Badge
  • Increased Flow And Performance
  • High Quality Band Clamps
See More

aFe POWER – ATLAS DPF Back Exhaust System: Black Tip, Aluminized Steel, Unleashes All Available HP (Part No.49-02051-1B)

ATLAS DPF Back Exhaust System: Black Tip, Aluminized Steel, Unleashes All Available HP

from

$481.99
The Large Bore HD Performance DPF-Back exhaust features 4″ 409 stainless steel tubing with smooth curves and increased size to help remove restriction and keeps exhaust gasses flowing smoothly. The OE style band-clamps and bayonet style hangers make sure this system installs cleanly and easily.

Product Features:
  • Aggressive Sound
  • Street Legal
  • Includes High Quality Band Clamps
  • Direct Bolt On
See More

MagnaFlow – D-Fit Performance Exhaust Muffler Replacement Kit With Muffler (Part No.19493)

D-Fit Performance Exhaust Muffler Replacement Kit With Muffler

from

$411.99
The MagnaFlow D-Fit Performance Exhaust Muffler Replacement Kit With Muffler 19493 offers enthusiasts an easy way to upgrade their 2014-2023 Ram 6.4L with the deep signature sound and dyno-proven performance that MagnaFlow exhaust systems are famous for. This easy-to-install solution is designed to connect (where applicable) to the stock break points of your 6.4L truck and replaces the restrictive factory muffler with a MagnaFlow straight-through muffler while retaining the OEM piping and tailpipe. 19493?is engineered to produce Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 3.5in. main piping. This exhaust system is produced using CNC precision robotic manufacturing and features durable 100% stainless steel construction, all backed by a limited lifetime construction warranty.

Product Features:
  • 409 Stainless Steel Construction
  • Mandrel Bent Stainless Steel Tubing
  • Maintains the OEM piping and tailpipe
See More

2024 Ram 2500 Exhaust Parts

You count on your 2024 Ram 2500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 2 Exhaust Parts ranging in price from $411.99 to $1,247.99, you’re sure to find everything you need for your 2024 Ram 2500.

Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 1 different brands like Magnaflow. 2024 Ram 2500 Exhaust Parts start as low as $411.99!

Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 2024 Ram 2500 below to get started!