2023 Toyota Sienna Oil and Lubricants

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
• Refresh aging seals and prevent leaks with seal conditioners
• Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
• Enhanced friction performance helps maximize power with advanced friction-fighting agents
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• MaxLife High Mileage Synthetic Blend Engine Oil is specially designed for engines with over 75,000 miles, providing greater protection and maximizing engine life.

Pennzoil Platinum High Mileage SAE 5W-30 is a full synthetic motor oil that is uniquely engineered from our revolutionary PurePlus gas-to-liquid technology which is a patented process that converts pure natural gas into a high quality, full synthetic base oil. Because it is made from natural gas, the base oil is 99.5% pure, contains fewer impurities than base oils made from crude oil, and when combined with our advanced additive technology, creates one of the best formulations in our Pennzoil high mileage portfolio. As your car ages, leaks may develop and cause higher oil consumption and oil burn off, potentially causing your engine to need frequent top-offs. Pennzoil Platinum High Mileage motor oil is enhanced with an excellent combination of special conditioning seal agents and additives to help stop leaks from seals and reduce the oil consumption that is typical of older and worn engines. Our full synthetic high mileage motor oil also protects engines from loss of horsepower, offers excellent performance in extreme temperatures, provides unsurpassed wear protection, and protection against abnormal combustion phenomenon like low-speed pre-ignition observed in modern turbocharged gasoline direct injection (TGDI) engines. Pennzoil Platinum High Mileage SAE 5W-30 is also engineered to help keep engines clean by gently lifting deposits and keeping them away from critical moving engine parts. In fact, it keeps pistons up to 50% cleaner than the toughest industry standards.

Product Features:

• Full synthetic 5W-30 engine oil made from natural gas, not crude, using Pennzoil’s patented gas-to-liquid PurePlus Technology
• Designed for for vehicles with over 75,000 miles
• Pennzoil Platinum High Mileage 5W-30 keeps pistons up to 45% cleaner than the toughest industry standard (Based on Sequence IIIH results)
• No other leading high mileage motor oil provides better protection from friction (Based on Sequence IVA wear test using SAE 5W-30)
• Formulated to deliver less oil burn off than high mileage motor oils made from crude oil
• Helps protect engines from loss of horsepower
• Provides faster low-temperature oil flow and protects in extreme heat
• Enhanced Leak Protection: Contains special conditioning seal agents and additives designed to help stop leaks and reduce oil consumption in older and worn engines.
• Superior Engine Cleanliness: Keeps engines clean by gently lifting deposits and keeping them away from critical moving engine parts, maintaining pistons up to 50% cleaner than the toughest industry standards.
• Unsurpassed Wear Protection: Offers excellent performance in extreme temperatures and provides protection against abnormal combustion phenomena like low-speed pre-ignition in modern turbocharged gasoline direct injection (TGDI) engines.

Environmental factors such as poor fuel quality, hot weather and stop-start driving conditions can lead to sludge, varnish and carbon build-up in your engine: three factors that reduce engine life, power and fuel economy. Castrol Ultraclean is a synthetic blend engine oil available in 0W-20, 5W-20 and 5W-30 grades. Its double-action formula has been proven to clean away the sludge that can block engine oilways* and helps prevent new sludge formation thanks to its synthetic technology. In fact, it provides up to 1.4X better sludge protection than is demanded by the latest industry standard. If keeping your engine clean is important to you, it’s good to know that no other oil keeps engines cleaner.

Product Features:

• 1.4X superior sludge protection compared to tough industry standards (As measured in the Sequence VH Sludge test vs. API SP test limits)
• Advanced protection against viscosity and thermal breakdown
• Superior protection against high-temperature deposits
• Premium-quality base oils and anti-wear additives that help extend the life of your engine
• Double-Action Formula: The synthetic blend engine oil features a double-action formula that effectively cleans away existing sludge and prevents new sludge formation.
• Versatile Grade Options: Available in 0W-20, 5W-20, and 5W-30 grades, Castrol Ultraclean offers flexibility to suit various engine requirements.
• Enhanced Engine Performance: By reducing sludge, varnish, and carbon build-up, this oil helps improve engine life, power, and fuel economy.
• Synthetic Blend Composition: The GTX Ultraclean 5W-30 Synthetic Blend Motor Oil combines the benefits of synthetic technology with the reliability of a standard oil class.

Pennzoil Platinum High Mileage SAE 5W-30 is a full synthetic motor oil that is uniquely engineered from our revolutionary PurePlus gas-to-liquid technology which is a patented process that converts pure natural gas into a high quality, full synthetic base oil. Because it is made from natural gas, the base oil is 99.5% pure, contains fewer impurities than base oils made from crude oil, and when combined with our advanced additive technology, creates one of the best formulations in our Pennzoil high mileage portfolio. As your car ages, leaks may develop and cause higher oil consumption and oil burn off, potentially causing your engine to need frequent top-offs. Pennzoil Platinum High Mileage motor oil is enhanced with an excellent combination of special conditioning seal agents and additives to help stop leaks from seals and reduce the oil consumption that is typical of older and worn engines. Our full synthetic high mileage motor oil also protects engines from loss of horsepower, offers excellent performance in extreme temperatures, provides unsurpassed wear protection, and protection against abnormal combustion phenomenon like low-speed pre-ignition observed in modern turbocharged gasoline direct injection (TGDI) engines. Pennzoil Platinum High Mileage SAE 5W-30 is also engineered to help keep engines clean by gently lifting deposits and keeping them away from critical moving engine parts. In fact, it keeps pistons up to 50% cleaner than the toughest industry standards.

Product Features:

• Full synthetic 5w-30 engine oil made from natural gas, not crude, using pennzoil’s patented gas-to-liquid pureplus technology
• Designed for for vehicles with over 75,000 miles
• Pennzoil platinum high mileage 5w-30 keeps pistons up to 45% cleaner than the toughest industry standard (based on sequence iiih results)
• No other leading high mileage engine oil provides better protection from friction (based on sequence iva wear test using sae 5w-30)
• Formulated to deliver less oil burn off than high mileage engine oils made from crude oil
• Helps protect engines from loss of horsepower
• Provides faster low-temperature oil flow and protects in extreme heat

Uniquely designed for your drive, Pennzoil Extended Care Full Synthetic motor oil combats engine aging to extend the life of your engine

Product Features:

• Pennzoil Extended Care Full Synthetic helps keep your engine clean by preventing engine deposits and formation of sludge
• Natural gas is synthesized into a 99.5% pure base oil, resulting in better oxidative stability, cold temperature performance, and volatility control
• Each Pennzoil premium oil is specially formulated to meet the requirements of your engine and unique driving style
• Recommended for use in all vehicles requiring the use of SAE 0W-20 or 5W-20 viscosity grade engine oils

CASTROL EDGE High Mileage 0W-20 Full Synthetic Motor Oil 1 Quart is the perfect choice for vehicles with over 75K miles. It is formulated with Fluid Titanium Technology and Phosphorus Replacement Technology to provide 10X better high-temperature performance and 6X better wear protection. This motor oil meets API SP/SN PLUS, ILSAC GF-6, GM dexos1 Gen 2, and ACEA A1/B1 C5 specifications. It also reduces the level of phosphorus to help prevent catalytic converter and emission system damage. Additionally, it reduces leaks, oil burn-off, and deposits. This full synthetic motor oil is the natural choice for consumers who want to extend maximum engine performance.

Product Features:

• 10x better high temperature performance – as measured in seq iiih engine test vs. api sp limit
• 6x better wear protection – as measured in seq iva test vs. latest test limit
• From the makers of the No. 1 high mileage brand
• Meets api sp/sn plus, ilsac gf-6, gm dexos1 gen 2, meets ford wss-m2c962-a1 and wss-m2c947-b1, meets engine test requirements of chrysler ms 6395
• Reduces the level of phosphorus to help prevent catalytic convertor failure,
• Reduces leaks, oil burn-off and deposits
• Exceeds api sn plus, ilsac gf-5, acea a1/b1 c5, gm dexos1 gen2, ford wss-m2c947-b1, chrysler ms-6395

Mobil 1 advanced full synthetic motor oil 5W-30 helps to extend engine life for vehicles of all ages. Mobil 1 advanced synthetic motor oil is designed to deliver outstanding engine protection from the five factors that can damage engines over time and protect critical engine parts for up to 10,000 miles between oil changes (1) . Its uniform synthetic oil molecules reduce friction, helping to prevent deposits and sludge buildup. Mobil 1 helps to keep your engine running at lower temperatures. (2) This technologically advanced motor oil is proven to cool engine temperatures by over 10%. (3) Its formulation provides excellent internal engine heat protection (up to 500 degrees Fahrenheit), and low-temperature protection (to -30 degrees Fahrenheit), supporting quick cold-weather starting and ultra-fast protection. Mobil 1 advanced full synthetic motor oil meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy. Mobil 1 advanced full synthetic motor oil 5W-30 also helps control oxidation to prevent oil breakdown and is recommended by ExxonMobil for all types of modern vehicles, including high-performance turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s leading synthetic motor oil brand at retail, recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ( (1) Protects for up to 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2) Compared to conventional oil. (3) Based on proprietary engine testing results may vary. (4) Source: The NPD Group/Retail Tracking Service/Dollar Sales/PCMO Full Synthetic/52 weeks ending July 1, 2023.)

Product Features:

• Mobil 1 advanced full-synthetic engine oil 5w-30 utilizes Mobil 1’s signature triple action formula to deliver outstanding engine performance, protection, and cleanliness.
• Helps protect critical engine parts for up to 10,000 miles between oil changes,(1) controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
• Meets ilsac gf-6 standards to help provide low-speed pre-ignition (lspi) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
• Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
• Provides excellent internal engine heat protection (up to 500 degrees f) and low temperature protection (to -30 degrees f)
• Manufacturer part number: 124317

Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.

Product Features:

• ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
• 40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
• 25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
• EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
• MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN, GM dexos 1 Gen 3
• Enhanced Oil Stability: Resists oil breakdown 10 times better than industry standards, providing consistent performance and reliability.
• Premium Additives: Contains premium anti-wear additives, superior antioxidants, and extra detergents for maximum performance and engine longevity.

CASTROL EDGE High Mileage 10W-30 Full Synthetic Motor Oil 1 Quart is the perfect solution for vehicles with over 75K miles. It is formulated with Fluid Titanium Technology and Phosphorus Replacement Technology to provide 10X better high-temperature performance and 6X better wear protection. This motor oil meets API SP/SN PLUS, ILSAC GF-6, GM 6094M standards and offers motor oils that meet OEM specifications. It is available in different grades, including 5W-20, 5W-30, and 10W-30. This motor oil is the natural choice for consumers who want to extend maximum engine performance and preserve the catalytic converter and the emission system. Try CASTROL EDGE High Mileage today and experience the difference in your vehicle’s performance.

Product Features:

• 10x better high temperature performance – as measured in seq iiih engine test vs. api sp limit
• 6x better wear protection – as measured in seq iva test vs. latest test limit
• From the makers of the No. 1 high mileage brand
• Meets api sp/sn plus, ilsac gf-6, gm 6094m
• Castrol edge offers engine oils that meet oem specification approvals or licenses that cover over 97.3% of the us car parc.
• Available in the following grades: 5w-20, 5w-30, 10w-30, and 10w-40
• Try castrol edge high mileage today

You trust your car to keep you going, even after 75,000 miles. Mobil 1 Extended Performance High Mileage full-synthetic motor oil 0W-20 gives engines with over 75,000 miles the extra care they need to go the distance. Formulated to help prevent leaks, it helps to protect critical engine parts for up to 20,000 miles between oil changes, guaranteed.(1) Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of maximized engine power. This cutting-edge formula is recommended by ExxonMobil for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s #1 synthetic motor oil brand at retail,(2) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ((1)Protects for up to 20,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2)Source: The NPD Group/Retail Tracking Service/Dollar Sales/PCMO full-synthetic/52 weeks ending July 1, 2023)

Product Features:

• Mobil 1 truck & suv advanced full-synthetic engine oil 0w-20 is specially formulated for hardworking trucks and suvs that operate in tough conditions like towing and hauling.
• Utilizes Mobil 1’s triple action+ formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of power
• Meets ilsac gf-6 standards to help provide low-speed pre-ignition (lspi) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
• Provides excellent internal engine heat protection (up to 500 degrees f) and low temperature protection (to -40 degrees f)
• Helps extend engine life by working to prevent damaging deposits and sludge buildup
• Manufacturer part number: 123837

Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. Castrol GTX is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It has evolved to meet the needs of consumers and vehicle manufacturers since 1968 and continues to innovate and remain a trusted brand today. Severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals can all cause the build-up of a thick, tar like substance called sludge. If untreated, it can rob a car’s engine of its power and ultimately its life. GTX is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Help Extend the Life of Your Engine with Castrol GTX.

Product Features:

• Superior protection against engine sludge (When tested in engines with a high level of sludge)
• Advanced protection against viscosity and thermal breakdown
• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Helps minimize oil consumption
• Trusted Brand: With over 50 years of innovation and trust, Castrol GTX has evolved to meet the needs of both consumers and vehicle manufacturers since 1968.
• Adaptable to Severe Conditions: Designed to perform under severe driving conditions such as heavy traffic, poor fuel quality, and harsh driving environments.
• This premium conventional motor oil, with an SAE oil weight of 10W-30, meets the standard oil class requirements for a wide range of vehicles.

FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Reliable engine protection: FRAM Conventional Oil 5W30 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.

Castrol GTX High Mileage motor oil is the leading consumer high-mileage brand. You won’t need to worry about using a high mileage oil or synthetic because this is both. It’s a synthetic blend engine oil that helps extend the life of your engine by protecting against sludge, wear and burn-off and also liquid engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is actually catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage Motor Oil is liquid engineered with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system and find out how many miles you can go on a high-mileage oil, there is no better choice than Castrol GTX High Mileage Motor Oil.

Product Features:

• Phosphorus replacement technology to help extend the life of the emission system
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (based on api and acea volatility specifications)
• Improved fuel economy (in 5w-20, 5w-30 and 10w-30 grades versus industry specifications)
• Provides extra protection for older vehicles: Castrol GTX High Mileage Engine Oil is specifically designed to provide extra protection for high mileage engines, helping to extend the life of your vehicle.
• Synthetic blend composition: This engine oil is a synthetic blend, combining the benefits of both conventional and synthetic oils to provide superior protection against sludge, wear, and burn-off.

FRAM Full Synthetic High Mileage SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Reduces oil cumsumption
• Excellent sludge and varnish protection
• Slows engine leaks
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.

Pennzoil Platinum full synthetic SAE 0W-20 motor oil is uniquely engineered from our revolutionary PurePlus gas-to-liquid technology, which is a patented process that converts pure natural gas into a high quality, full synthetic base oil. Our high-quality base oil is 99.5% pure, contains fewer impurities than base oils made from crude oil, and when combined with our advanced additive technology creates one of the best formulations in our Pennzoil portfolio. Pennzoil Platinum full synthetic SAE 0W-20 motor oil is licensed and meets the vehicle warranty requirements of GM’s dexos 1 Gen 2 specifications that are set forth to meet today’s modern engine technologies. This means that our Pennzoil Platinum full synthetic products meet the stringent requirements of leading car manufacturers. Why does this matter? Modern engine technologies have evolved over the years and today’s engine parts have reached an unprecedented level of fine manufacturing tolerances which require a high-quality engine oil to help provide complete engine protection. This includes protection against abnormal combustion phenomenon like low-speed pre-ignition observed in modern turbocharged gasoline direct injection (TGDI) engines.

Product Features:

• Engineered to provide a high-quality base oil using our revolutionary PurePlus gas-to-liquid technology in combination with a high performance additive system
• Helps protect against the effects of low speed pre-ignition (LSPI) in modern turbocharged engines
• Provides better fuel economy which helps you drive an extra 550 miles per year vs a dirty engine
• Offers unsurpassed wear protection by keeping engine parts from coming into contact
• Delivers outstanding piston cleanliness, keeping pistons up to 50% cleaner than required by the toughest industry standards- based on Sequence IIIH engine test results
• Specifications, Approvals and Recommendations: FCA MS-6395; Ford WSS-M2C947-B1; GM dexos1TM Gen 2
• Exceeds the requirements of the following industry specifications: API SN PLUS, API SN-RC and all previous categories; ILSAC GF-5; ACEA A1/B1
• For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual.

CASTROL EDGE High Mileage 5W-30 Full Synthetic Motor Oil 1 Quart is the perfect choice for vehicles with over 75K miles. It is formulated with Fluid Titanium Technology that provides 10X better high-temperature performance and 6X better wear protection. The oil is designed with Phosphorus Replacement Technology that preserves the catalytic converter and the emission system. It meets API SP/SN PLUS, ILSAC GF-6, GM dexos1 Gen 2, and other OEM specifications. Castrol EDGE High Mileage is a full synthetic motor oil that offers superior performance and protection for high mileage engines. It is available in different grades, including 5W-20, 5W-30, and 10W-30. Try Castrol EDGE High Mileage today and extend the life of your engine.

Product Features:

• 10x better high temperature performance – as measured in seq iiih engine test vs. api sp limit
• 6x better wear protection – as measured in seq iva test vs. latest test limit
• From the makers of the No. 1 high mileage brand
• Meets api sp/sn plus, ilsac gf-6, gm dexos1 gen 2, meets ford wss-m2c961-a1 and wss-m2c946-b1, meets engine test requirements of chrysler ms 6395 and 13340
• Castrol edge offers engine oils that meet oem specification approvals or licenses that cover over 97.3% of the us car parc.
• Available in the following grades: 5w-20, 5w-30, 10w-30, and 10w-40
• Try castrol edge high mileage today

Royal Purple Motor Oil is a specially formulated multi viscocity oil for use in gasoline and diesel engines of all types from cars and trucks to SUVs, motorcycles and boats. Royal Purple(R) Motor Oil with Synerlec(R) additive technology reduces friction, which results in a 1-3 percent increase in horsepower, lowers operating temperatures, provides superior corrosion protection, improves fuel economy, reduces emissions and extends oil life. A.P.I. Certified.

Product Features:

• Better wear protection
• Increased fuel efficiency
• Better protection of the expensive catalytic emission system
• Improved compatibility with fuels containing ethanol
• Superior corrosion protection
• Meets ILSAC GF-5 and Dexos1 performance requirements

Castrol EDGE with Fluid TITANIUM Technology is Castrol’s strongest oil, offering an unbeatable combination of sludge protection, wear protection, and maximum engine performance. This full synthetic oil is 3X stronger against viscosity breakdown than the leading full synthetic, based on the Kurt Orbahn test in 5W-30 grade. It delivers 10X better high-temperature performance as measured in the Seq IIIH engine test versus API SP limits and provides 6X better wear protection according to the Seq IVA test against the latest test limits. Meeting API SP/SN PLUS and ILSAC GF-6B standards, it is also 10X stronger against high-temperature oil thickening compared to industry standards. Additionally, it helps improve fuel economy, making it the natural choice for drivers who demand the best.

Product Features:

• 3X Stronger against viscosity breakdown than the leading full synthetic – Based on Kurt Orbahn test in 5W-30 grade
• 10X Better High Temperature performance – As measured in Seq IIIH engine test vs. API SP limit
• 6X Better Wear Protection – As measured in Seq IVA test vs. latest test limit
• Meets API SP/SN PLUS, ILSAC GF-6B
• 10x stronger against high temperature oil thickening vs. industry standards(Seq IIIH vs API SN PLUS Limits)
• Helps improve fuel economy
• Exceeds: API SN Plus, ILSAC GF-5
• Unmatched Sludge and Wear Protection: Castrol EDGE with Fluid TITANIUM Technology offers superior sludge and wear protection, ensuring your engine remains clean and operates at peak performance.

Castrol GTX High Mileage motor oil is the leading consumer high-mileage brand. You won’t need to worry about using a high mileage oil or synthetic because this is both. It’s a synthetic blend engine oil that helps extend the life of your engine by protecting against sludge, wear and burn-off and also liquid engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is actually catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage Motor Oil is liquid engineered with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system and find out how many miles you can go on a high-mileage oil, there is no better choice than Castrol GTX High Mileage Motor Oil.

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (Based on API and ACEA volatility specifications)
• Improved fuel economy (In 5W-20, 5W-30 and 10W-30 grades versus industry specifications)
• Synthetic Blend Composition: Castrol GTX High Mileage Motor Oil is a synthetic blend, offering the benefits of both conventional and synthetic oils for superior engine protection.
• Extended Engine Life: Designed to protect against sludge, wear, and burn-off, this motor oil helps extend the life of high mileage engines.
• Optimal Viscosity: With an SAE oil weight of 10W-30, this motor oil provides excellent performance in a wide range of temperatures, ensuring reliable engine protection.

FRAM Full Synthetic High Mileage SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Reduces oil cumsumption
• Excellent sludge and varnish protection
• Slows engine leaks
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Engine Cleaning and Efficiency: Helps clean out sludge buildup, keeping engines running clean with increased efficiency and power, ideal for engines with over 75,000 miles.
• Advanced LSPI Prevention: Contains additive technology designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines.
• Comprehensive Engine Protection: Provides increased wear protection, oxidation, and shear stability for higher mileage vehicles, meeting stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications.

You count on your gas-powered truck or SUV for more than just transportation. For a motor oil that works as hard as you do, you can trust Mobil 1 Truck & SUV full-synthetic motor oil 0W-20. Mobil 1 Truck & SUV utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine protection and cleanliness to your engine for up to 10,000 miles between oil changes, (1) and proven performance in a 10,000 lb. towing test. (2) Mobil 1 Truck & SUV full-synthetic motor oil 0W-20 is also 10% more resistant to oil breakdown (3) and meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping your fuel economy. Mobil 1 is America’s #1 selling synthetic motor oil brand at retail, (4) trusted recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ( (1) Protects for up to 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2) Please reference your vehicle owner’s manual for information on your engine’s maximum towing / hauling capacity. (3) Versus leading synthetic competitors in proprietary oxidation test. (4) Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO full-synthetic/ 52 weeks ending July 1, 2023)

Product Features:

• Mobil 1 truck & suv advanced full-synthetic engine oil 0w-20 is specially formulated for hardworking trucks and suvs that operate in tough conditions like towing and hauling.
• Helps protect critical engine parts for up to 10,000 miles between oil changes,(1) controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
• Utilizes Mobil 1s signature triple action formula to deliver outstanding engine protection, cleanliness, and proven performance in a 10,000 lb. towing test(2)
• Additives that help prevent deposit formation
• Provides excellent internal engine heat protection (up to 500 degrees f) and low temperature protection (to -40 degrees f)
• Keeps your engine running like new by providing unsurpassed wear protection
• Manufacturer part number: 124593

Keep your engine running at peak efficiency while improving fuel economy. Engineered for today’s advanced engines, Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-20 helps to improve fuel economy (1) and extend engine life for vehicles of all ages. Mobil 1 Advanced Fuel Economy utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness to your vehicle. Specialty components in synthetic oil reduce friction, helping to prevent deposits and sludge buildup to keep critical engine parts clean and protected for up to 10,000 miles between oil changes. (2) This technologically advanced formulation offers outstanding engine efficiency, wear protection, internal engine heat protection (up to 500 degrees Fahrenheit), and low-temperature protection (to -40 degrees Fahrenheit)-bringing quick cold-weather starting and ultra-fast protection to your engine. Mobil 1 Advanced Fuel Economy meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy. Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-20 also helps control oxidation to prevent oil breakdown and is recommended by ExxonMobil for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s #1 selling synthetic motor oil brand at retail, (3) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR.

Product Features:

• Mobil 1 advanced fuel economy full-synthetic engine oil 0w-20 is low-viscosity to help improve fuel economy. (1)
• Utilizes Mobil 1’s signature triple action formula to deliver outstanding engine performance, protection, and cleanliness
• Helps protect critical engine parts for up to 10,000 miles between oil changes, (2) controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
• Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean
• Helps extend engine life by working to prevent damaging deposits and sludge buildup
• Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
• Manufacturer part number: 105891
• (1) Potential fuel economy improvement obtained by switching from higher-viscosity oils to a lower-viscosity grade. actual savings are dependent upon vehicle/engine type, outside temperature, driving conditions, & your current engine oil viscosity
• (2) Protects for up to 10,000 miles or 1 year, whichever comes first. to learn more about the Mobil 1 limited warranty, visit mobil.us.
• (3) Source: the npd group/ retail tracking service/ dollar sales/ pcmo full-synthetic/ 52 weeks ending july 1, 2023

FRAM Full Synthetic High Mileage SAE 0W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 0W-20 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 0W-20 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 0W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Reduces oil cumsumption
• Excellent sludge and varnish protection
• Slows engine leaks
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.

FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Reliable engine protection: FRAM Conventional Oil 5W30 1 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.

FRAM Conventional High Mileage 10W30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 10W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Sludge Cleanup and Engine Efficiency: Formulated to help clean out sludge buildup, keeping engines running clean with increased efficiency and power.
• Versatile Compatibility: Protects domestic and imported vehicles and equipment powered by gasoline or light-duty diesel engines, including turbocharged and supercharged engines.
• Meets Stringent Standards: Formulated to meet or exceed all new car manufacturers’ warranty requirements and stringent industry standards API SP/CF, and ILSAC GF-6A Resource Conserving Service Category.

If you trust your vehicle to be there for you, you need to be there for its engine, with Mobil 1 Extended Performance full-synthetic motor oil 5W-30. Our ultimate full-synthetic motor oil meets or exceeds the industry’s toughest standards to help you get the most from your engine for up to 20,000 miles between oil changes, guaranteed.(1) Mobil 1 Extended Performance utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of maximized engine power. This cutting-edge formula is recommended by ExxonMobil for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s No. 1 synthetic motor oil brand at retail,(2) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®. ((1)Protects for up to 20,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (3)Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO full-synthetic/ 52 weeks ending Feb 25, 2023)

Product Features:

• Mobil 1 Extended Performance full-synthetic motor oil 5W-30 helps protect critical engine parts for up to 20,000 miles between oil changes,(1) controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
• Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of power
• Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
• Helps extend engine life by working to prevent damaging deposits and sludge buildup
• Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
• Manufacturer Part Number: 112627
• Versatile Compatibility: Recommended for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks.
• Trusted Brand: Mobil 1 is America’s No. 1 synthetic motor oil brand at retail, trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR«.
• Trusted Brand: Mobil 1 is America’s No. 1 synthetic motor oil brand at retail, trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®.

Quaker State Full Synthetic 0W-20 motor oil delivers strong engine performance and protection against deposits between oil changes. It’s designed to protect today’s sophisticated engines, including modern turbocharged engines. Quaker State Full Synthetic motor oil is the best of the Quaker State portfolio. It can be used in both new and older vehicles, especially high performance vehicles such as sports cars, SUVs, trucks, and minivans. Additionally, Quaker State Full Synthetic 0W-20 is compatible with biofuels ranging from E10 to E85 and is suitable for hybrid engines. It provides high resistance to oxidation, keeping the oil fresher for longer, and it reduces friction to maximize horsepower in your vehicle (compared to Quaker State conventional and synthetic blend motor oils). It exceeds the requirements of the following industry specifications: API SP-Resource Conserving, API SN Plus and all previous categories; ILSAC GF-6a and all previous ILSAC Standards. Quaker State Full Synthetic 0W-20 motor oil meets the specifications for: Chrysler MS-6395; GM dexos1 Gen 2; Ford WSS-M2C947-A; Ford WSS-M2C947-B1. For a full list of equipment approvals and recommendations, please consult your local Quaker State Technical Help Desk and always consult your owner’s manual.

Product Features:

• Full synthetic 0W-20 motor oil provides strong engine performance and protection against deposits between oil changes
• Provides improved fuel economy (based on the latest industry standard)
• Designed to provide more performance with superior lubrication flow and pumpability at high and low temperatures (compared to Quaker State conventional and synthetic blend motor oils).
• Formulated with high resistance to oxidation, keeping the oil fresher for longer.
• Reduces friction to maximize horsepower (compared to Quaker State conventional and synthetic blend motor oils)
• Maintains required viscosity from start to finish, providing optimal protection
• Suitable for all car, SUV, light van, truck gasoline and turbocharged engines; under all driving conditions.
• Compatible with biofuels ranging from E10 to E85 and suitable for hybrid vehicles.

FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-Speed Pre-Ignition Control
• Chain Wear Protection
• Piston Cleanliness
• Turbo-Compatibility
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Versatile Compatibility: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI), as well as older carbureted or normally fuel-injected gasoline engine designs.
• High-Quality Conventional Base Stocks: Utilizes a blend of high-quality conventional base stocks to ensure reliable engine protection across a broad range of operating conditions.
• Meets Stringent Standards: Complies with API SP, SN Plus, SN, SM, and ILSAC GF-6A, GF-5, and earlier API and ILSAC Service Categories, ensuring it meets the latest industry requirements.
• SAE oil weight of 10W-30, making it a dependable choice for various engine types.