2023 GMC Sierra 1500 Exhaust Parts

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 3 in. Mandrel Bent 409 Stainless Steel Tubing
• Hassle Free Installation
• Free-Flow Muffler
• Aggressive Sound

Introducing an all new Rebel Series Dual Center Exit Cat-Back exhaust system for the Jeep Wrangler (JK) with V6-3.6L/3.8L engine. This unique Rebel Series exhaust system is designed with dual center exit tips for an aggressive look. The Tips are 4-1/2″ with aFe power plates and constructed out of stainless steel for durability. This performance cat-back exhaust is constructed of 2-1/2″ MIG-welded mandrel-bent stainless steel tubing. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. In testing, this cat-back exhaust system added an astounding +9 horsepower and +14 lbs. x ft. of torque as verified by our in house dyno. This exhaust system comes complete with a 22″ free-flowing muffler, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation.

Product Features:

• Unique Dual Center Exit Exhaust System
• High-Flow Stainless Steel Muffler
• Mandrel Bent Stainless Steel Tubing
• Bolt-On Installation

The MagnaFlow Street Series Cat-Back Performance Exhaust System 15278 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Rolled Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck’s to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15278 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15278 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

Our Black Series performance exhaust systems offer a true murdered-out style without compromising on quality and performance. With fully sealed seams to resist rust you can count on this system to really hold up. The black coat finishing is recommended for driving areas that are not exposed to salt and other chemicals on the road.

Product Features:

• Exhaust System Kit DPF Back
• Built To Perform, Designed To Maximize Exhaust Flow And Minimize Exhaust Temperatures Your Truck Will Use Less Gas, Last Longer And Perform Better
• Dyno Proven, From The Vehicle Specific Muffler Design To The Fully Mandrel Bent Tubing To Minimal Bend Degree Angles, Your Performance System Gets Exhaust Out Fast
• Sound And Style, Performance Exhaust System Has Been Specifically Tuned To Get The Optimal Sound From Your Pickup
• Easy Installation, Bolt-On, No Weld Design Makes Installation A No Hassle One And A Half To Two Hour Project

DynoMax® Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler

Product Features:

• Stainless steel construction for lifelong protection
• 100% welded design for maximum durability
• Straight through design ensures unrestricted exhaust flow and reduces back pressure
• CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
• Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 3 in. Mandrel Bent Stainless Steel
• 100% Hand TIG Welded
• Leak Free Seal
• Aggressive Sound

BORLA(R) Cat-Back(TM) and Axle-Back exhaust systems feature patented straight-through and multi-core technology designed to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA(R) Sound of Power respected by motoring enthusiasts everywhere.

Product Features:

• Built From Premium T-304 Austenitic Stainless Steel, Superior To T-400 Series Knockoffs, To Give You The Absolute Best In Performance And Durability
• Straight-Through And Multi-Core Technology To Unleash Hidden Horsepower
• Increased Exhaust Velocity Adds Power, Driving Excitement, Fuel Economy, And The Distinctive BORLA(R) Sound Of Power Respected By Motoring Enthusiasts Everywhere
• This System Features A Black Chrome Finish On T-304 Stainless Steel Tips
• Ultra-Smooth Mandrel Bends Ensure Maximum Flow And Power, And Precision Computer-Controlled CNC Manufacturing Ensures An Accurate Fit

Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.

Product Features:

• Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
• Each system is built from premium, high-quality austenitic T-304 stainless steel
• Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit

The MagnaFlow Street Series Cat-Back Performance Exhaust System 15778 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15778 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15778 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

The BORLA(R) Cat-Back(TM) Name Implies The Exhaust System Is Located Behind The Factory Catalytic Converter Where There Factory Emissions Remain Untouched And Vehicle Stays Emissions Compliant. This Remains Distinct From The Axle Back Exhaust System that Is Located Behind The Rear Axle.

Product Features:

• Increases The Overall Sound Level And Performance
• Cat-Back(TM) Performance Exhaust System Replaces The Factory Exhaust System Following The Same Exhaust Path And Secured Using The Original Vehicle Hangars And Rubber Isolators
• Pioneered The Automotive Exhaust Aftermarket In Exhausts Constructed In Aircraft Grade 304 Stainless Steel Tubing, A Material With Higher Content Of Carbon And Nickel That Will Not Rust Or Corrode
• Easy Bolt-On Installation
• Aggressive S-Type Sound Under Acceleration, No Drone At Highway Speeds

BORLA(R) has developed a revolutionary exhaust technology that enables our engineers to deliver unprecedented vehicle specific control over the acoustical note of an exhaust throughout the RPM range, while retaining 100 Percent of the power adding capability.

Product Features:

• Enables Unprecedented Vehicle Specific Control Over The Acoustical Note Of An Exhaust Throughout RPM Range, While Retaining 100 Percent Of The Power Adding Capabilities Of BORLA Multi-Core Design
• Produces The Highest Available Decibel Levels In The Borla Street Legal Lineup, And Is Designed For High Performance Purists Who Prefer Exhaust Notes Over Their Stereos
• The Focus Of ATAK(R) Is To Pump The Volume While Retaining Clarity Of Sound, Avoiding Distortion Typically Found In Louder Exhausts
• The Sound Output Is Tuned Like A Graphic Equalizer To Shape And Focus Sound Waves For Optimum High Volume Output
• Premium High Quality T-304 Stainless Steel Construction, Ultra Smooth Mandrel Bent Piping, Mirror Polished Tips

aFe POWER Vulcan Series exhaust system is designed to provide the highest in quality and durability. Constructed from mandrel-bent, 304 stainless steel, this exhaust system offers performance across the power band and delivers a deep, aggressive exhaust tone. This system utilizes a less-restricting, high-flow muffler to improves performance while maintaining a consistent smooth tone. 100% hand MIG-welded by certified craftsmen for proven quality and durability.

Product Features:

• This item will only fit models equipped with dual exhaust from the factory
• Utilizes High-Flow Stainless Steel Muffler
• Mandrel-Bent Tubing for Improved Flow
• Polished Tips

BORLA(R) Cat-back(TM) and Rear Section exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA(R) Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium T-304 austenitic stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Best of all, BORLA(R) stands behind every system with a Million-Mile Warranty.

Product Features:

• BORLA(R) Cat-Back(TM) Exhausts Feature, Straight Through And Multi-Core Technology To Unleash Hidden Horsepower
• Increased Exhaust Velocity Adds Power, Driving Excitement, Fuel Economy, And The Distinctive BORLA(R) Sound Of Power Respected By Motoring Enthusiasts Everywhere
• Each System Is Built From Aircraft Grade High Quality T-304 Stainless Steel, Superior To T-400 Series Knockoffs, To Give You The Absolute Best In Performance And Durability
• Ultra-Smooth Mandrel Bends Ensure Maximum Flow And Power
• Precision Computer Controlled CNC Manufacturing Ensures An Accurate Fit

Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.

Product Features:

• Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
• Each system is built from premium, high-quality austenitic T-304 stainless steel
• Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit

The MagnaFlow D-Fit Performance Exhaust Muffler Replacement Kit Without Muffler 19491 19491 replaces the restrictive factory muffler of your Truck with fast-flowing mandrel bent 3.5in. tubing, while maintaining the OEM piping and tailpipe. Exhaust Muffler kit 19491 features a direct-fit, easy-to-install design and is produced using CNC precision robotic manufacturing techniques. This exhaust system’s durable, corrosion resistant stainless steel construction is backed by MagnaFlow’s limited lifetime warranty.

Product Features:

• 409 Stainless Steel Construction
• Mandrel Bent Stainless Steel Tubing
• Maintains the OEM piping and tailpipe

The MagnaFlow D-Fit Performance Exhaust Muffler Replacement Kit Without Muffler 19476 19476 replaces the restrictive factory muffler of your Truck with fast-flowing mandrel bent 2.75in. tubing, while maintaining the OEM piping and tailpipe. Exhaust Muffler kit 19476 features a direct-fit, easy-to-install design and is produced using CNC precision robotic manufacturing techniques. This exhaust system’s durable, corrosion resistant stainless steel construction is backed by MagnaFlow’s limited lifetime warranty.

Product Features:

• 409 Stainless Steel Construction
• Mandrel Bent Stainless Steel Tubing
• Maintains the OEM piping and tailpipe