2023 Chevrolet Malibu Engine Parts
More 2023 Chevrolet Malibu Engine Parts Categories
If you’re looking for an original Engine Parts replacement for a 2023 Chevrolet Malibu, you can search through our selection below. You’ll also find aftermarket and OEM Engine Parts to meet your needs.
Essential 2023 Chevrolet Malibu Engine Parts
Spectra Premium – Engine Oil Pan (Part No.GMP66C)
from
$149.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium oil pans meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE expertise
- Durable powder coating applied to exterior of oil pan for a long lasting rust free unit
- Washed and then sealed with an anti-corrosive spray on the interior for a rust free unit at installation
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Road tested to ensure real world performance and to verify that each design meets our high standards for quality
- Coating salt spray tested for over 200 hours to insure durability
Spectra Premium – Engine Oil Pan (Part No.GMP08A)
from
$79.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium oil pans meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE expertise
- Durable powder coating applied to exterior of oil pan for a long lasting rust free unit
- Washed and then sealed with an anti-corrosive spray on the interior for a rust free unit at installation
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Road tested to ensure real world performance and to verify that each design meets our high standards for quality
- Coating salt spray tested for over 200 hours to insure durability
Dorman – Engine Oil Pan: Direct Fit, Aluminum, Center Sump, 5 Quart (Part No.264-377)
from
$204.99
Oil pan leaking? This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil pan is made to match the original pan on specific vehicles
- Complete assembly – includes replacement pan and drain plugs to match original components
- Durable design – high-strength coating prevents future corrosion
- Trustworthy value – backed by team of engineers and quality control experts in the United States
Spectra Premium – Engine Oil Pan (Part No.GMP58A)
from
$188.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium oil pans meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE expertise
- Durable powder coating applied to exterior of oil pan for a long lasting rust free unit
- Washed and then sealed with an anti-corrosive spray on the interior for a rust free unit at installation
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Road tested to ensure real world performance and to verify that each design meets our high standards for quality
- Coating salt spray tested for over 200 hours to insure durability
Spectra Premium – Engine Oil Pan (Part No.GMP59A)
from
$157.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium oil pans meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE expertise
- Durable powder coating applied to exterior of oil pan for a long lasting rust free unit
- Washed and then sealed with an anti-corrosive spray on the interior for a rust free unit at installation
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Road tested to ensure real world performance and to verify that each design meets our high standards for quality
- Coating salt spray tested for over 200 hours to insure durability
Spectra Premium – Engine Oil Pan (Part No.GMP92A)
from
$127.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium oil pans meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE expertise
- Durable powder coating applied to exterior of oil pan for a long lasting rust free unit
- Washed and then sealed with an anti-corrosive spray on the interior for a rust free unit at installation
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Road tested to ensure real world performance and to verify that each design meets our high standards for quality
- Coating salt spray tested for over 200 hours to insure durability
Dorman – Engine Oil Pan: Direct Fit, Aluminum, Center Sump, 5 Quart (Part No.264-481)
from
$143.99
Oil pan leaking? This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil pan is made to match the original pan on specific vehicles
- Complete assembly – includes replacement pan and drain plugs to match original components
- Durable design – high-strength coating prevents future corrosion
- Trustworthy value – backed by team of engineers and quality control experts in the United States
Dorman – Engine Oil Pan: Direct Fit, Steel, Rear Sump, 5 Quart (Part No.264-025)
from
$76.99
Oil pan leaking? This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil pan is made to match the original pan on specific vehicles
- Complete assembly – includes replacement pan and drain plugs to match original components
- Durable design – high-strength coating prevents future corrosion
- Trustworthy value – backed by team of engineers and quality control experts in the United States
Spectra Premium – Engine Oil Pan (Part No.GMP68A)
from
$167.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium oil pans meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE expertise
- Durable powder coating applied to exterior of oil pan for a long lasting rust free unit
- Washed and then sealed with an anti-corrosive spray on the interior for a rust free unit at installation
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Road tested to ensure real world performance and to verify that each design meets our high standards for quality
- Coating salt spray tested for over 200 hours to insure durability
Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.2328)
from
$8.49
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to BUIC 68-90; CHEV 78-90; GMC 78-84; OLDS 65-90; PONT 75-89;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1965-1990
- Weight approx: 2 Lbs
- PART GROUP: 2328, 2328
- PRODUCT: MADE IN THE USA
Mr. Gasket – Solid Motor Mount (Part No.3672)
from
$71.09
Mr. Gasket Solid Steel Motor Mounts are recommended only for competition applications. This .180 inch thick, zinc dichromate plated solid mounts do not have the flexing present in rubber or even polyurethane engine mounts. This prevents lateral engine movement or twisting in high horsepower and torque applications. Nor will steel mounts break as easily as stock rubber mounts can. Engine movement in applications like this can cause contact of engine components into places they do not need to be (like headers hitting the frame of the car). Also engine twisting can cause severe drivetrain misalignment affecting shifting or even power transmission to the ground. However, without the insulative effect of rubber, vibration will be substantial and thus solid mounts are not recommended for the street.
Product Features:
See More
Product Features:
- .180 inch thick solid steel minimizes engine movement
- Solid steel less prone to breakage than stock rubber mounts
- Prevent driveline misalignment that can affect accurate shifting and power transmission
- Prevents engine accessories from coming in contact with frame due to movement
- Recommended for competition use
- Sold as a LH/RH pair
Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.2285)
from
$12.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to CHEV 61-82;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1961-1982
- Weight approx: 3 Lbs
- PRODUCT: MADE IN THE USA
- HEIGHT: 1 1/2 INCH / 38 MM PLATE TO BOLT HOLE
- CRADLE WIDTH: 2 5/8 INCH / 66.67 MM
- TOP MOUNT BOLT NOT INCLUDED
- INTERLOCK
- PART GROUP: 2285, 2285
Anchor – Engine Mount: Right, 1 Piece (Part No.3488)
from
$115.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to CHEV 16-22;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2016-2022
- Weight approx: 5 Lbs
- HYDRAULIC
Energy Suspension – Performance Polyurethane Motor Mount for GM Vehicles (Part No.3.1114R)
from
$57.99
A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.
Product Features:
See More
Product Features:
- Gains Both Performance and Longevity
- Will Handle Any and All Torque
- Out Lasts Rubber
Anchor – Engine Mount: Right, 1 Piece (Part No.2933)
from
$75.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to CHEV 97-03; OLDS 99-04; PONT 99-05;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1997-2005
- Weight approx: 4 Lbs
- HYDRAULIC
Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.2292)
from
$13.49
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to BUIC 68-96; CADI 76-96; CHEV 72-05; GMC 73-99; OLDS 73-92; PONT 73-92;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1968-2005
- Weight approx: 3 Lbs
- PRODUCT: MADE IN THE USA
- DESIGN: CLAMSHELL
- PART GROUP: 2292, 2292
Anchor – Engine Mount: Front Right, Front Left, 1 Piece (Part No.2267)
from
$11.79
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to CHEV 57-73; GMC 71-73; PONT 71-72;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1957-1973
- Weight approx: 2 Lbs
- WITH INTERLOCK
- PART GROUP: 2267, 2267
Anchor – Engine Mount: Front Left, 1 Piece (Part No.2383)
from
$6.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to BUIC 75-78; CHEV 78-78; GMC 78-78; OLDS 75-78; PONT 76-77;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1975-1978
- Weight approx: 3 Lbs
Imperial – Ultra-Cool Engine Oil Cooler Kit (Part No.240457)
from
$167.99
Product Features:
See More
- Size: 3/4 in. x 10 in. x 12-1/4 in.
- Medium duty applications
- All except Chevrolet V8 applications
- Two-pass design for increased cooling
Imperial – Econo-Kool® Engine Oil Cooler (Part No.240459)
from
$141.99
Product Features:
See More
- Imperial Econo-Kool« engine oil cooler kit
- Size: 3/4″ x 7-1/2″ x 12-1/2″
- Light-duty applications
- All except Chevrolet V8 applications
- Size: 3/4 in. x 7-1/2 in. x 12-1/2 in.
- Light duty applications
- All except Chevrolet V8 applications
- Lightweight construction with high-efficiency turbulators
Imperial – Engine Oil Cooler (Part No.241046)
from
$259.99
Product Features:
See More
- Imperial Swirl-Cool« engine oil cooler kit
- Size: 1-1/2″ x 6-1/2″ x 18″
- Heavy-duty applications
- Chevrolet V8 applications
- Size: 1.5 in. x 6.5 in. x 18 in.
- Heavy duty applications
- Specifically designed for Chevrolet V8 applications with metal line kit for easier installation
- Two-pass design for increased cooling
Dorman – Engine Oil Temperature Cooler (Part No.918-432)
from
$154.99
This engine oil cooler is designed to match the fit and function of an original equipment cooler on specified vehicles. It is engineered to help maintain proper engine oil temperature when an original cooler has failed from heat, corrosion or damage.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil cooler is designed to match the fit and function of an original equipment cooler on specified vehicles
- Ideal solution – engineered to help maintain proper engine oil temperature when an original cooler has failed from heat, corrosion or damage
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Imperial – Engine Oil Cooler (Part No.241040)
from
$216.99
Product Features:
See More
- Imperial Swirl-Cool« engine oil cooler kit
- Size: 1-1/2″ x 6-1/2″ x 18″
- Heavy-duty applications
- All except Chevrolet V8 applications
- Universal Cooler, NOT a direct OE replacement. User to determine fitment prior to installation
- Heavy duty applications
- All except Chevrolet V8 applications
Dorman – Engine Oil Cooler (Part No.918-628)
from
$151.99
This engine oil cooler is designed to match the fit and function of an original equipment cooler on specified vehicles. It is engineered to help maintain proper engine oil temperature when an original cooler has failed from heat, corrosion or damage.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil cooler is designed to match the fit and function of an original equipment cooler on specified vehicles
- Ideal solution – engineered to help maintain proper engine oil temperature when an original cooler has failed from heat, corrosion or damage
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Popular 2023 Chevrolet Malibu Engine Parts Categories
2023 Chevrolet Malibu Engine Parts
You count on your 2023 Chevrolet Malibu to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Engine Parts. With 5 Engine Parts ranging in price from $24.36 to $151.99, you’re sure to find everything you need for your 2023 Chevrolet Malibu.
Brands matter. If you want to shop a specific Engine Parts brand, we stock 3 different brands like Vaico, Dorman, and Anchor. 2023 Chevrolet Malibu Engine Parts start as low as $24.36!
Did we mention you can order your Engine Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Engine Parts inventory for your 2023 Chevrolet Malibu below to get started!
FAQs for 2023 Chevrolet Malibu Engine Parts
What are the most purchased Engine Parts for the 2023 Chevrolet Malibu?
Out of 5 Engine Parts for the 2023 Chevrolet Malibu, the most popular in our inventory are:
from
$35.99
This product is not rated
Engine Oil Pan: Direct Fit, Steel, Rear Sump, 4.2 Quart
Oil Pans
