2023 BMW X6 Cooling and Climate Controls
More 2023 BMW X6 Cooling and Climate Controls Categories
If you’re looking for an original Cooling and Climate Controls replacement for a 2023 BMW X6, you can search through our selection below. You’ll also find aftermarket and OEM Cooling and Climate Controls to meet your needs.
Essential 2023 BMW X6 Cooling and Climate Controls
Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)
from
$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.
Product Features:
See More
Product Features:
- Ideal for rigid cast aluminum parts
- Meets OEM Specifications
- Sensor safe & non-corrosive
- Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
- Blowout resistant, allowing leakproof gaskets to be made in just one minute
- Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
- Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
- Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
- Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
Elring – Water Pump Gasket (Part No.G3040314647ELR)
from
$14.84
Water Pump Gasket
Carquest Premium – Coolant Reservoir Cap: T65, Threaded, Direct Fit, Provides Tight Seal, 1 Pack (Part No.T65)
from
$30.49
Coolant Reservoir Cap: T65, Threaded, Direct Fit, Provides Tight Seal, 1 Pack
Carquest Premium – Coolant Reservoir Cap: T64, Threaded, Direct Fit, Provides Tight Seal, 1 Pack (Part No.T64)
from
$27.99
Coolant Reservoir Cap: T64, Threaded, Direct Fit, Provides Tight Seal, 1 Pack
Rein – Cap-Expansion Tank (Part No.CPE0034)
from
$21.99
Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.
Product Features:
See More
Product Features:
- Manufactured to strict engineering standards/specifications in materials and tolerances.
- Direct fit.
- Meets or exceeds pressure specifications demanded by the OE manufacturer.
- Produced by an original equipment supplier.
Rein – Cap-Expansion Tank (Part No.CPE0035)
from
$22.99
Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.
Product Features:
See More
Product Features:
- Manufactured to strict engineering standards/specifications in materials and tolerances.
- Direct fit.
- Meets or exceeds pressure specifications demanded by the OE manufacturer.
- Produced by an original equipment supplier.
Motorad – Radiator Cap: 30 PSI (Part No.T-65)
from
$29.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Carquest Premium – Engine Coolant Integrated Thermostat Housing (Part No.85956)
from
$85.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- Meets and/or exceeds OEM standard
- Includes quality gasket or O-ring to ensure proper seal (where applicable
- Coated with corrosion and rust inhibitor
- 100% leak tested
- All-in-one bolt on solution for a complete repair
- Includes quality thermostat
Motorad – Integrated Thermostat Housing: With Sensor, 207 Degrees (Part No.790-207)
from
$171.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Motorad – Integrated Thermostat Housing: With Sensor, 217 Degrees (Part No.790-217)
from
$229.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Wahler – Wahler Thermostat Assembly (Part No.G4002384376WAH)
from
$138.29
Wahler is a provider of premium quality thermostats and thermo-switches in OE quality. The varying applications and divergent technologies of the internal combustion engine call for thermostats featuring different operating characteristics and modes of operation. Therefore Wahler provides thermostats with a highly accurate coolant control.
Product Features:
See More
Product Features:
- Strict quality control, and functional testing
- Self-cleaning and self-aligning thermostat valve
- Original equipment design provides exact fit and performance
- Precise sealing edges reduce leakage and premature cooling
- Temperature sensitive heat motor provides consistent valve response for smooth performance and precise engine cooling
- Stainless steel assembly and springs are engineered for long life
Dorman – Thermostat Assembly: Includes 3 Bolts, Housing, and Thermostat, 207 Degrees (Part No.902-5154)
from
$108.99
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
Dorman – Thermostat Assembly: Includes Sensor, Housing, and Thermostat, 217 Degrees (Part No.902-5825)
from
$239.99
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
Rein – Thermostat Assembly 97C (Part No.CTA0029)
from
$74.99
Rein Automotive OE quality thermostat assemblies install, fit and perform the way the original manufacturer intended. These assemblies are designed to meet or exceed the OE materials used. Rein thermostat housings are constructed of metal or plastic based on vehicle specific factory requirements. The housings are constructed from molds cast directly from the OEM parts to meet the strict tolerances of the vehicle’s factory specifications. This ensures a smooth and easy installation, just as one would expect to find with OE quality. Rein thermostats are produced with high-quality metals and components to ensure proper durability and service life. The thermostats are temperature calibrated to have a consistent and precise response suiting cooling system needs. Our quality thermostat assemblies aim to provide the profession repair technician and vehicle owner the peace of mind and trust that is expected from an OE quality component.
Product Features:
See More
Product Features:
- Matches original equipment design specifications.
- Direct fitments allows easy installation.
- Manufactured to strict engineering standards/specifications in materials and tolerances.
- Thermostat set to 97 degrees Celsius to maintain optimal running temperature.
Original Equipment – Oil Temperature Send (Part No.P4033412906OEA)
from
$56.96
Oil Temperature Send
Original Equipment – A/C Pressure Switch (Part No.R1054668713OEA)
from
$29.54
A/C Pressure Switch
Popular 2023 BMW X6 Cooling and Climate Controls Categories
2023 BMW X6 Cooling and Climate Controls
You count on your 2023 BMW X6 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 7 Cooling and Climate Controls ranging in price from $14.84 to $90.08, you’re sure to find everything you need for your 2023 BMW X6.
Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 6 different brands like Motorad, Original Equipment, and Rein. 2023 BMW X6 Cooling and Climate Controls start as low as $14.84!
One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 2 extensive product reviews on 2023 BMW X6 Cooling and Climate Controls.
Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 2023 BMW X6 below to get started!
Top-Rated Cooling and Climate Controls Brands For Your 2023 BMW X6
Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2023 BMW X6 running right for years to come. In our inventory you’ll find brands like Motorad, Original Equipment, Rein, and even more.
Popular Motorad Cooling and Climate Controls
You’ll find popular Motorad brand products across Engine Cooling Parts. All are waiting to get your 2023 BMW X6 back on the road. Some of the top-rated Motorad products in these categories are:
from
$84.99
(2)
Integrated Thermostat Housing: With Sensor, With Seal, 221 Degrees
Thermostat and Water Outlet Assemblies
FAQs for 2023 BMW X6 Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the 2023 BMW X6?
Out of 7 Cooling and Climate Controls for the 2023 BMW X6, the most popular in our inventory are:
