2023 Audi S8 Cooling and Climate Controls
Find Your Specific 2023 Audi S8 Cooling and Climate Controls
Below you will find various in-demand Audi Cooling and Climate Controls, components and accessories for your 2023 S8. Advance Auto Parts has popular S8 parts like Blower Motor and Related Products, Engine Cooling Parts, Heating Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other S8 model years including
2007,
2008,
2009,
2013,
2014,
2015,
2016,
2017,
2018 and more. Select a category of 2023 Audi S8 Cooling and Climate Controls below and start saving instantly.
Popular 2023 Audi S8 Cooling and Climate Controls Categories
Essential Cooling and Climate Controls for 2023 Audi S8s
NTK – Engine Coolant Temperature Sensor (Part No.EF0079)
from
$33.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.
Product Features:
See More
Product Features:
- OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
- FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
- THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
NTK – Engine Coolant Temperature Sensor (Part No.EF0153)
from
$29.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.
Product Features:
See More
Product Features:
- OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
- FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
- THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
Carquest Premium – Coolant Temperature Sensor with O-Ring (Part No.WTC2196)
from
$50.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest – Engine Coolant Temperature Sensor (Part No.WT7257)
from
$20.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- In manufacturing, we custom form the wax pellets for different temperature range specifications. All units are calibrated & tested to confirm switch actuation at their specified temperature
- The switch is designed using a formed bimetallic contact arm. The bimetal contact movement is achieved using the different expansion rates of two metals fused together. This is a creep action device, provides precise performance
- In production, all thermal switches are factory-calibrated to make electrical contact at the specified lower-temperature set point
- Robust design and high grade materials meet the stringent demands of today’s service professional
Pierburg – Auxiliary Water Pump (Part No.G3050551866APG)
from
$513.11
The product selection from Pierburg Pump Technology covers the complete range of applications for electric water circulation and coolant pumps in the automotive industry. Pierburg has extensive experience in the area of electric water pumps, especially with regard to EC engine technology and hydraulics. The canned motor concept was selected to meet the high requirements for operational reliability and service life. This special motor design has an additional tube placed in the space between the stator and the rotor, which keeps the stator statically sealed with respect to the medium pumped by the running rotor. Since this drive system requires no dynamic sealing elements which are subject to wear (rotating mechanical seals), the water circulation and coolant pumps are especially reliable and free of wear problems. Moreover, the EC motor used in the pumps requires no brushes. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.
Product Features:
See More
Product Features:
- OE Quality, reliability and service life
- Reduction in noise
- Leak-proof sealing of the drive
- Fuel savings and reduced emissions
- Cooling even without operation of the engine
- Water circulation pump can deliver as much as 800 liters per hour
- Coolant pump can deliver more than 9,000 liters per hour
Pierburg – Auxiliary Water Pump (Part No.G3050551801APG)
from
$211.60
The product selection from Pierburg Pump Technology covers the complete range of applications for electric water circulation and coolant pumps in the automotive industry. Pierburg has extensive experience in the area of electric water pumps, especially with regard to EC engine technology and hydraulics. The canned motor concept was selected to meet the high requirements for operational reliability and service life. This special motor design has an additional tube placed in the space between the stator and the rotor, which keeps the stator statically sealed with respect to the medium pumped by the running rotor. Since this drive system requires no dynamic sealing elements which are subject to wear (rotating mechanical seals), the water circulation and coolant pumps are especially reliable and free of wear problems. Moreover, the EC motor used in the pumps requires no brushes. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.
Product Features:
See More
Product Features:
- OE Quality, reliability and service life
- Reduction in noise
- Leak-proof sealing of the drive
- Fuel savings and reduced emissions
- Cooling even without operation of the engine
- Water circulation pump can deliver as much as 800 liters per hour
- Coolant pump can deliver more than 9,000 liters per hour
Corteco – Heater Pipe O-Ring (Part No.G3077462035CFW)
from
$1.81
Heater Pipe O-Ring
Carquest Premium – Blower Motor: With Wheel (Part No.76520)
from
$299.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.
Product Features:
See More
Product Features:
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
- Functionally Equivalent to OE Design
- Magnetic size and properties compare or exceed OEM
- Hermetically Sealed & Thermally Protected Electronics
Elring – Water Pump O-Ring (Part No.G3059279771ELR)
from
$4.11
Water Pump O-Ring
Upgrade your 2023 Audi S8 with Top-Quality Cooling and Climate Controls
When it comes to maintaining or upgrading your 2023 Audi S8, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Audi or enhancing its overall performance, Cooling and Climate Controls are key to keeping your S8 functioning at its best. At Advance Auto Parts, we offer a wide selection of 7 Cooling and Climate Controls for the 2023 Audi S8, designed to meet your needs without breaking the bank.
From
Blower Motor and Related Product
replacements to
Engine Cooling Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2023 Audi S8 at great prices.
Our Cooling and Climate Controls inventory for this model
ranges from just $1.81 to $299.99, with
an average price of $85.96.
Our 7 Cooling and Climate Controls in stock come from 5 trusted brands, so you’re sure to find the right part for your 2023 Audi S8 without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2023 Audi S8 is always ready to roll. We’re committed to providing you with everything you need to keep your S8 in top shape, all in one place.
Start shopping confidently below for your 2023 Audi S8!
Best-Selling Blower Motor and Related Products for 2023 Audi S8s
Enhance the driving experience in your Audi with 1 quality Blower Motor and Related Product components, starting at $299.99.
Carquest Premium – Blower Motor: With Wheel (Part No.76520)
from
$299.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.
Product Features:
See More
Product Features:
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
- Functionally Equivalent to OE Design
- Magnetic size and properties compare or exceed OEM
- Hermetically Sealed & Thermally Protected Electronics
Most Popular 2023 Audi S8 Engine Cooling Parts
Customize your Audi with 5 Engine Cooling Parts products
like Coolant Temperature Sensors,
Water Pump O-Rings, and
Engine Auxiliary Water Pumps, all
priced under $211.60.
Pierburg – Auxiliary Water Pump (Part No.G3050551801APG)
from
$211.60
The product selection from Pierburg Pump Technology covers the complete range of applications for electric water circulation and coolant pumps in the automotive industry. Pierburg has extensive experience in the area of electric water pumps, especially with regard to EC engine technology and hydraulics. The canned motor concept was selected to meet the high requirements for operational reliability and service life. This special motor design has an additional tube placed in the space between the stator and the rotor, which keeps the stator statically sealed with respect to the medium pumped by the running rotor. Since this drive system requires no dynamic sealing elements which are subject to wear (rotating mechanical seals), the water circulation and coolant pumps are especially reliable and free of wear problems. Moreover, the EC motor used in the pumps requires no brushes. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.
Product Features:
See More
Product Features:
- OE Quality, reliability and service life
- Reduction in noise
- Leak-proof sealing of the drive
- Fuel savings and reduced emissions
- Cooling even without operation of the engine
- Water circulation pump can deliver as much as 800 liters per hour
- Coolant pump can deliver more than 9,000 liters per hour
Carquest Premium – Coolant Temperature Sensor with O-Ring (Part No.WTC2196)
from
$50.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – Coolant Temperature Sensor (Part No.WTC2065)
from
$29.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Elring – Water Pump O-Ring (Part No.G3059279771ELR)
from
$4.11
Water Pump O-Ring
MTC – Water Pipe O-Ring (Part No.G2026749470MTC)
from
$3.25
Water Pipe O-Ring
Top Picks for 2023 Audi S8 Heating Parts
Upgrade Audi S8s with top-quality Heating Parts parts, including 1 OEM and aftermarket selections for your 2023 model.
Corteco – Heater Pipe O-Ring (Part No.G3077462035CFW)
from
$1.81
Heater Pipe O-Ring
FAQs for 2023 Audi S8 Cooling and Climate Controls
Which Cooling and Climate Controls are best-sellers for 2023 Audi S8s?
Out of 7 Cooling and Climate Controls that fit 2023 Audi S8s, the following parts are the top sellers:
- Auxiliary Water Pump (11915016) – $211.60
- Coolant Temperature Sensor (12423025) – $29.99
- Coolant Temperature Sensor with O-Ring (12422956) – $50.99
What’s the price range for 2023 Audi S8 Cooling and Climate Controls?
Cooling and Climate Control prices for the 2023 Audi S8 start at $1.81 and go up to $299.99 for the most premium parts.
What’s the average price of a Cooling and Climate Control for a 2023 Audi S8?
The average price for Cooling and Climate Controls for the 2023 Audi S8 is $85.96. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Cooling and Climate Controls for other Audi S8 model years?
What are the cheapest Cooling and Climate Controls for my 2023 Audi S8?
The cheapest 2023 Audi S8 Cooling and Climate Controls we carry in stock are:
- Heater Pipe O-Ring (11025643) – $1.81
- Water Pipe O-Ring (12568617) – $3.25
- Water Pump O-Ring (11914764) – $4.11
- Coolant Temperature Sensor (12423025) – $29.99
- Coolant Temperature Sensor with O-Ring (12422956) – $50.99
What types of Cooling and Climate Controls do you sell for my 2023 Audi S8?
As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2023 Audi S8:
Can I get help with 2023 Audi S8 Cooling and Climate Control orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Audi Cooling and Climate Controls and more.
What is your return policy for Audi S8 Cooling and Climate Controls?
Advance Auto Parts keeps returns simple. For new Audi S8 Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
