2023 Acura TLX Wheels and Tires

Essential Wheels and Tires for 2023 Acura TLXes

Dorman – Serrated Wheel Stud (Part No.O8060156146DOR)

Serrated Wheel Stud

from

$3.08
When it comes to your wheels, don’t take chances. Dorman’s Wheel Studs are produced to strict engineering quality standards. Dorman’s engineers design these parts with tight tolerance on specific part characteristics to ensure proper fit and function, this design provides assurance your wheels will be tight every time they are removed and installed.

Product Features:
  • Direct replacement for a proper fit every time
  • Corrosion resistant
  • Double-ended studs as well as serrated bolts, and wheel bolts available
  • Over-length and under-length studs available for convenience and ease of installation
See More

Dorman – Wheel Stud: Serrated without Clip Head, M14-1.50 Thread Size, Right Hand Thread (Sold by each) (Part No.610-527)

Wheel Stud: Serrated without Clip Head, M14-1.50 Thread Size, Right Hand Thread (Sold by each)

from

$2.29
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Product Features:
  • Durable material – carbon steel meets SAE automotive industry standards for strength and hardness.
  • Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
  • Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
  • Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
See More

Dorman – Wheel Stud: Serrated without Clip Head, M14-1.50 Thread Size, RHT, 1 Pack (Part No.610-527.1)

Wheel Stud: Serrated without Clip Head, M14-1.50 Thread Size, RHT, 1 Pack

from

$2.49
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Product Features:
  • Durable material – carbon steel meets SAE automotive industry standards for strength and hardness.
  • Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
  • Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
  • Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
See More

McGard – Black Cone Seat Style Lug Nut Set (M12 x 1.5 Thread Size) – Set of 4 Lug Nuts (Part No.64031)

Black Cone Seat Style Lug Nut Set (M12 x 1.5 Thread Size) - Set of 4 Lug Nuts

from

$34.99
Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers. Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough.

Product Features:
  • Guaranteed for life not to rust, chip, or peel.
  • Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
  • For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
See More

McGard – Chrome Cone Seat SplineDrive Lug Nut Set (M12 x 1.5 Thread Size) – Set of 4 Lug Nuts (Part No.65357)

Chrome Cone Seat SplineDrive Lug Nut Set (M12 x 1.5 Thread Size) - Set of 4 Lug Nuts

from

$29.99
Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. SplineDrive lug nuts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. SplineDrive lug nuts take safety, dependability and style to the next level.

Product Features:
  • Guaranteed for life not to rust, chip, or peel.
  • Every McGard SplineDrive lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
  • For aluminum wheels only.
  • Requires 65100 Or 65300 Installation Tool sold separately
See More

Dorman – Wheel Lug Nut: M14-1.50 Thread, Ball, Acorn, 1.122" Length, Chrome, 1 Pack (Part No.611-327.1)

Wheel Lug Nut: M14-1.50 Thread, Ball, Acorn, 1.122" Length, Chrome, 1 Pack

from

$5.99
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:
  • Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles.
  • Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Schrader – EZ-sensor Programmable TPMS Sensor with Rubber Snap-in Valve – 24 Pack (Part No.33700-4)

EZ-sensor Programmable TPMS Sensor with Rubber Snap-in Valve - 24 Pack

from

$138.99
Schrader EZ-sensor Programmable TPMS sensor headlines the TPMS product offerings from Schrader TPMS Solutions. Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com – For more information about Schrader and its products visit: www.SchraderTPMS.com

Product Features:
  • EZ-sensor must be programmed to specific M/M/Y vehicle
  • EZ-sensor Programmable TPMS sensor fits 99% of vehicles on the road
  • EZ-sensor can be programmed by most all TPMS programming tools on the Market
  • Supports 314.9, 315 and 433 MHz sensor applications
  • Always keep your TPMS scan and programming tool up to date with the latest software
  • Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
  • Aluminum valve can be replaced by Schrader service kit 20049
  • Nut Torque = 71 in-lbs
  • Valve Core Torque = 3.5 in-lbs
See More

Huf North America – 315/433MHz Universal Sensor (Part No.UVS7051)

315/433MHz Universal Sensor

from

$42.99
Professional installation is strongly suggested

Product Features:
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Schrader – EZ-sensor Programmable TPMS Sensor with Rubber Snap-in Valve, 24 Pack (Part No.33500-24BU)

EZ-sensor Programmable TPMS Sensor with Rubber Snap-in Valve, 24 Pack

from

$601.99
Schrader EZ-sensor Programmable TPMS sensor headlines the TPMS product offerings from Schrader TPMS Solutions. Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com. For more information about Schrader and its products visit: www.SchraderTPMS.com

Product Features:
  • EZ-sensor must be programmed to specific M/M/Y vehicle
  • EZ-sensor Programmable TPMS sensor fits 99% of vehicles on the road
  • EZ-sensor can be programmed by most all TPMS programming tools on the Market
  • Supports 314.9, 315 and 433 MHz sensor applications
  • Always keep your TPMS scan and programming tool up to date with the latest software
  • Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
  • Rubber Valve can be replaced by rubber valve kit 20018 or aluminum valve kit 34000
  • Valve Core Torque = 3.5 in-lbs (0.4 Nm)
See More

Dill Air Control – TPMS Service Kit (Part No.7000K)

TPMS Service Kit

from

$5.99
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:
  • Blue Striped Kit for Acura, Chrysler, Dodge, Honda, & Jeep
See More

Continental – TPMS Service Kit (Part No.SE54193)

TPMS Service Kit

from

$6.49
All Continental brand TPMS parts are OE validated for fit, performance and reliability. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Pivoting valve stem for expanded wheel fitment. OE validated part identical to the dealer. Continental aftermarket TPMS sensors include all component parts for ease of installation. Waterproof sensor is impervious to tire air moisture. Then, now, and into the future, we will be there for you, our customer.
See More

Dill Air Control – Snap-In TPMS Service Kit: Rubber, Includes Stepped Screw, 1 Piece (Part No.VS-20)

Snap-In TPMS Service Kit: Rubber, Includes Stepped Screw, 1 Piece

from

$3.49
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits and tools.

Product Features:
  • TPMS Snap-in stem for GM, Ford
  • Includes stepped screw.
  • 0.453″ rim hole compatibility
  • 80 PSI maximum cold inflation pressure
See More

McGard – Gold SplineDrive 5 Lug Wheel Installation Kit (M12 x 1.5 Thread Size) (Part No.65557GD)

Gold SplineDrive 5 Lug Wheel Installation Kit (M12 x 1.5 Thread Size)

from

$194.99
The convenient way to order Tuner wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts and wheel locks are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome with gold PVD producing a superior finish while protecting against rust.
  • For aluminum wheels only.
  • Set of 16 Lug Nuts, 1 Installation Tool, 4 Wheel Locks, 1 Key, & Key Storage Pouch
See More

McGard – Chrome SplineDrive 5 Lug Wheel Installation Kit (M12 x 1.5 Thread Size) (Part No.65557)

Chrome SplineDrive 5 Lug Wheel Installation Kit (M12 x 1.5 Thread Size)

from

$144.99
The convenient way to order Tuner wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts and wheel locks are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
  • For aluminum wheels only.
  • Set of 16 Lug Nuts, 1 Installation Tool, 4 Wheel Locks, 1 Key, & Key Storage Pouch
See More

McGard – Black SplineDrive 5 Lug Wheel Installation Kit (M12 x 1.5 Thread Size) (Part No.65557BK)

Black SplineDrive 5 Lug Wheel Installation Kit (M12 x 1.5 Thread Size)

from

$199.99
The convenient way to order Tuner wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts and wheel locks are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
  • For aluminum wheels only.
  • Set of 16 Lug Nuts, 1 Installation Tool, 4 Wheel Locks, 1 Key, & Key Storage Pouch
See More

McGard – Cone Seat- Under Hub Cap Wheel Lock Set (M12 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.24012)

Cone Seat- Under Hub Cap Wheel Lock Set (M12 x 1.5 Thread Size) - Set of 4 Locks and 1 Key

from

$39.99
Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
  • For use under wheel covers, center caps and hub caps.
  • Can also be used for exposed applications with optional (70005) black or (70006) chrome caps.
See More

McGard – Chrome Cone Seat Wheel Lock Set (M12 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.24157)

Chrome Cone Seat Wheel Lock Set (M12 x 1.5 Thread Size) - Set of 4 Locks and 1 Key

from

$34.99
Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
See More

McGard – Chrome Tuner Style Cone Seat Wheel Lock Set (M12 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.25257)

Chrome Tuner Style Cone Seat Wheel Lock Set (M12 x 1.5 Thread Size) - Set of 4 Locks and 1 Key

from

$54.99
Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.

Product Features:
  • For use on “Tuner” wheels or wheels with very small lug nut holes.
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
  • For aluminum wheels only.
See More

Carquest Premium – Hub Assembly with Wheel Bearing 91-605202 (Part No.91-605202)

Hub Assembly with Wheel Bearing 91-605202

from

$169.99
Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.

Product Features:
  • Engineered for OE fit, form and function
  • Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
  • High-quality steel and surface treatments for proper fit and endurance
  • Roll-form bearing design applies exact preload for increased durability (where applicable)
  • Bearings and seals are engineered to the requirements of each specific vehicle application
  • Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)
See More

MOOG Hub Assemblies – Wheel Bearing and Hub Assembly: Rear, 5 Studs (Part No.512656)

Wheel Bearing and Hub Assembly: Rear, 5 Studs

from

$196.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • RELIABLE PERFORMANCE — Precise roll-form design ensures consistent and optimal factory-installed preload to minimize excessive noise and wear (where applicable)
  • EXTENDED SERVICE LIFE — Application-specific advanced raceway design reduces stress, rotation and heat on components
  • KEEPS WATER AND DIRT OUT — Quad lip seal design inhibits damage by keeping moisture and other contaminants out (where applicable)
  • EASY TO INSTALL — Engineered and designed for fast, hassle-free installation
  • CORROSION PROTECTION — Application-specific coated wheel studs resist corrosion and rust for easier removal and proper torqueing
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Dorman – Wheel Bearing and Hub Assembly: Rear, 5 Studs (Part No.951-006)

Wheel Bearing and Hub Assembly: Rear, 5 Studs

from

$249.99
This replacement wheel bearing and hub assembly comes with the hub and critical bearing replacement components included for a complete repair on specific vehicle applications.

Product Features:
  • Complete repair – this assembly includes the wheel hub and application-specific bearing components.
  • Saves time – eliminates work required to remove individual corroded components.
  • Reliable fit – precision-engineered to match the dimensions of original equipment
  • Trustworthy quality – engineered and tested in the United States
See More

Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 4 Piece (Part No.33500-4)

Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 4 Piece

from

$129.99
Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com For more information about Schrader and its products visit: www.SchraderTPMS.com

Product Features:
  • Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
  • Sensor must be programmed to specifi Y/M/M vehicle
  • Compatible with most programming tools
  • Make sure that your TPMS programming tool is updated to it’s latest version
  • Combines 314.9, 315 & 433 MHz application into one sensor
  • Future proofed to support new and pending OE system technologies
  • Optimizes inventory levels and returns
  • Reduces overal cost and increases speed of service
  • Use service kit 20018 to replace the rubber valve assembly
  • Valve Core Torque = 3.5 in-lbs (0.4 Nm)
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Schrader – Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc (Part No.33700)

Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc

from

$51.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:
  • MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
  • COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
  • FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
  • DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
  • COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
  • ADJUSTABLE: 0-40 degree adjustable stem fits into more aftermarket rim sets
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Autel – 1 Boxed MX-Sensor 1-Sensor Press-in Aluminum Valve Stem (Part No.1-SENSORM)

1 Boxed MX-Sensor 1-Sensor Press-in Aluminum Valve Stem

from

$44.49
The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 & J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:
  • Combined Frequency: 315MHz and 433MHz
  • Programmable with Autel TPMS Service Tools
  • Exclusive Press Release Button to Easily Replace Valve Stems
  • Program to Replace 99% of OE Sensors
  • Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
  • Meets SAE Standards J1205 & J1206
  • Maximum Signal Strength / Battery Reliability
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

McGard – Chrome Bulge Cone Seat Style Lug Nut Set (M12 x 1.5 Thread Size) – Set of 4 Lug Nuts (Part No.64012)

Chrome Bulge Cone Seat Style Lug Nut Set (M12 x 1.5 Thread Size) - Set of 4 Lug Nuts

from

$26.99
Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers. Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough. Bulge Style Cone Seat lug nuts have an extended seating surface that is designed to match the wider seating surface used on some aluminum wheels.

Product Features:
  • Guaranteed for life not to rust, chip, or peel.
  • Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
  • For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
See More

McGard – Chrome Cone Seat Style Lug Nut Set (M12 x 1.5 Thread Size) – Set of 4 Lug Nuts (Part No.64002)

Chrome Cone Seat Style Lug Nut Set (M12 x 1.5 Thread Size) - Set of 4 Lug Nuts

from

$24.99
Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers. Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough.

Product Features:
  • Guaranteed for life not to rust, chip, or peel.
  • Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
  • For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
See More

Upgrade your 2023 Acura TLX with Top-Quality Wheels and Tires

When it comes to maintaining or upgrading your 2023 Acura TLX, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Acura or enhancing its overall performance, Wheels and Tires are key to keeping your TLX functioning at its best. At Advance Auto Parts, we offer a wide selection of 42 Wheels and Tires for the 2023 Acura TLX, designed to meet your needs without breaking the bank. From TPMS Sensor Kit replacements to TPMS Sensors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Wheels and Tires for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Wheels and Tires for your 2023 Acura TLX at great prices. Our Wheels and Tires inventory for this model ranges from just $2.29 to $869.99, with an average price of $166.65. Our 42 Wheels and Tires in stock come from 8 trusted brands, so you’re sure to find the right part for your 2023 Acura TLX without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2023 Acura TLX, we stock popular OEM and aftermarket Wheels and Tires from top names like Schrader McGard, and more. Schrader Wheels and Tires start at just $41.99 and boast an impressive 4 stars average rating from customers. With 162 customer reviews and counting, our 2023 Acura TLX Wheels and Tires have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Wheels and Tire upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2023 Acura TLX is always ready to roll. We’re committed to providing you with everything you need to keep your TLX in top shape, all in one place. Start shopping confidently below for your 2023 Acura TLX!

Best-Selling TPMS Sensor Kits for 2023 Acura TLXes

Enhance the driving experience in your Acura with 1 quality TPMS Sensor Kit components, starting at $3.49.

Dill Air Control – Snap-In TPMS Service Kit: Rubber, Includes Stepped Screw, 1 Piece (Part No.VS-20)

Snap-In TPMS Service Kit: Rubber, Includes Stepped Screw, 1 Piece

from

$3.49
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits and tools.

Product Features:
  • TPMS Snap-in stem for GM, Ford
  • Includes stepped screw.
  • 0.453″ rim hole compatibility
  • 80 PSI maximum cold inflation pressure
See More

Most Popular 2023 Acura TLX TPMS Sensors

Customize your Acura with 8 TPMS Sensors products like Tire Pressure Sensors and Remote Tire Pressure Sensors, all priced under $601.99.

Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece (Part No.33500)

Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece

from

$41.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:
  • MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
  • COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
  • FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
  • DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
  • COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Schrader – Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc (Part No.33700)

Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc

from

$51.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:
  • MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
  • COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
  • FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
  • DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
  • COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
  • ADJUSTABLE: 0-40 degree adjustable stem fits into more aftermarket rim sets
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Schrader – EZ-sensor Programmable TPMS Sensor with Rubber Snap-in Valve, 24 Pack (Part No.33500-24BU)

EZ-sensor Programmable TPMS Sensor with Rubber Snap-in Valve, 24 Pack

from

$601.99
Schrader EZ-sensor Programmable TPMS sensor headlines the TPMS product offerings from Schrader TPMS Solutions. Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com. For more information about Schrader and its products visit: www.SchraderTPMS.com

Product Features:
  • EZ-sensor must be programmed to specific M/M/Y vehicle
  • EZ-sensor Programmable TPMS sensor fits 99% of vehicles on the road
  • EZ-sensor can be programmed by most all TPMS programming tools on the Market
  • Supports 314.9, 315 and 433 MHz sensor applications
  • Always keep your TPMS scan and programming tool up to date with the latest software
  • Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
  • Rubber Valve can be replaced by rubber valve kit 20018 or aluminum valve kit 34000
  • Valve Core Torque = 3.5 in-lbs (0.4 Nm)
See More

Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 12 Piece (Part No.33500-12)

Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 12 Piece

from

$361.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:
  • MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
  • COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
  • FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
  • DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
  • COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Schrader – EZ-sensor Programmable TPMS Sensor with Rubber Snap-in Valve – 24 Pack (Part No.33700-4)

EZ-sensor Programmable TPMS Sensor with Rubber Snap-in Valve - 24 Pack

from

$138.99
Schrader EZ-sensor Programmable TPMS sensor headlines the TPMS product offerings from Schrader TPMS Solutions. Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com – For more information about Schrader and its products visit: www.SchraderTPMS.com

Product Features:
  • EZ-sensor must be programmed to specific M/M/Y vehicle
  • EZ-sensor Programmable TPMS sensor fits 99% of vehicles on the road
  • EZ-sensor can be programmed by most all TPMS programming tools on the Market
  • Supports 314.9, 315 and 433 MHz sensor applications
  • Always keep your TPMS scan and programming tool up to date with the latest software
  • Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
  • Aluminum valve can be replaced by Schrader service kit 20049
  • Nut Torque = 71 in-lbs
  • Valve Core Torque = 3.5 in-lbs
See More

Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 4 Piece (Part No.33500-4)

Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 4 Piece

from

$129.99
Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com For more information about Schrader and its products visit: www.SchraderTPMS.com

Product Features:
  • Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
  • Sensor must be programmed to specifi Y/M/M vehicle
  • Compatible with most programming tools
  • Make sure that your TPMS programming tool is updated to it’s latest version
  • Combines 314.9, 315 & 433 MHz application into one sensor
  • Future proofed to support new and pending OE system technologies
  • Optimizes inventory levels and returns
  • Reduces overal cost and increases speed of service
  • Use service kit 20018 to replace the rubber valve assembly
  • Valve Core Torque = 3.5 in-lbs (0.4 Nm)
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Huf North America – 315/433MHz Universal Sensor (Part No.UVS7051)

315/433MHz Universal Sensor

from

$42.99
Professional installation is strongly suggested

Product Features:
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Huf North America – 315/433MHz Universal Sensor (Part No.UVS7050)

315/433MHz Universal Sensor

from

$42.99
Professional installation is strongly suggested

Product Features:
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Top Picks for 2023 Acura TLX Wheel Bearings

Upgrade Acura TLXes with top-quality Wheel Bearings parts, including 2 OEM and aftermarket selections for your 2023 model.

MOOG Hub Assemblies – Wheel Bearing and Hub Assembly: Rear, 5 Studs (Part No.512656)

Wheel Bearing and Hub Assembly: Rear, 5 Studs

from

$196.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • RELIABLE PERFORMANCE — Precise roll-form design ensures consistent and optimal factory-installed preload to minimize excessive noise and wear (where applicable)
  • EXTENDED SERVICE LIFE — Application-specific advanced raceway design reduces stress, rotation and heat on components
  • KEEPS WATER AND DIRT OUT — Quad lip seal design inhibits damage by keeping moisture and other contaminants out (where applicable)
  • EASY TO INSTALL — Engineered and designed for fast, hassle-free installation
  • CORROSION PROTECTION — Application-specific coated wheel studs resist corrosion and rust for easier removal and proper torqueing
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Carquest Premium – Hub Assembly with Wheel Bearing 91-705591 (Part No.91-705591)

Hub Assembly with Wheel Bearing 91-705591

from

$165.99
Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.

Product Features:
  • Engineered for OE fit, form and function
  • Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
  • High-quality steel and surface treatments for proper fit and endurance
  • Roll-form bearing design applies exact preload for increased durability (where applicable)
  • Bearings and seals are engineered to the requirements of each specific vehicle application
  • Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)
See More

In-Demand Wheel Hardware for 2023 Acura TLXes

Select from 27 premium Wheel Hardware parts for your 2023 Acura TLX, with prices ranging from $5.99 to $869.99.

McGard – Black Cone Seat Style Lug Nut Set (M12 x 1.5 Thread Size) – Set of 4 Lug Nuts (Part No.64031)

Black Cone Seat Style Lug Nut Set (M12 x 1.5 Thread Size) - Set of 4 Lug Nuts

from

$34.99
Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers. Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough.

Product Features:
  • Guaranteed for life not to rust, chip, or peel.
  • Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
  • For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
See More

McGard – Black Tuner Style Cone Seat Wheel Lock Set (M12 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.25357)

Black Tuner Style Cone Seat Wheel Lock Set (M12 x 1.5 Thread Size) - Set of 4 Locks and 1 Key

from

$71.99
Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.

Product Features:
  • For use on “Tuner” wheels or wheels with very small lug nut holes.
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
  • For aluminum wheels only.
See More

McGard – Chrome Cone Seat Style Lug Nut Set (M12 x 1.5 Thread Size) – Set of 4 Lug Nuts (Part No.64002)

Chrome Cone Seat Style Lug Nut Set (M12 x 1.5 Thread Size) - Set of 4 Lug Nuts

from

$24.99
Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers. Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough.

Product Features:
  • Guaranteed for life not to rust, chip, or peel.
  • Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
  • For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
See More

McGard – Chrome Bulge Cone Seat Style Lug Nut Set (M12 x 1.5 Thread Size) – Set of 4 Lug Nuts (Part No.64012)

Chrome Bulge Cone Seat Style Lug Nut Set (M12 x 1.5 Thread Size) - Set of 4 Lug Nuts

from

$26.99
Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers. Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough. Bulge Style Cone Seat lug nuts have an extended seating surface that is designed to match the wider seating surface used on some aluminum wheels.

Product Features:
  • Guaranteed for life not to rust, chip, or peel.
  • Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
  • For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
See More

McGard – Chrome Cone Seat Wheel Lock Set (M12 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.24157)

Chrome Cone Seat Wheel Lock Set (M12 x 1.5 Thread Size) - Set of 4 Locks and 1 Key

from

$34.99
Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
See More

McGard – Black Bulge Cone Seat Style Lug Nut Set (M12 x 1.5 Thread Size) – Set of 4 Lug Nuts (Part No.64015)

Black Bulge Cone Seat Style Lug Nut Set (M12 x 1.5 Thread Size) - Set of 4 Lug Nuts

from

$34.99
Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers. Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough. Bulge Style Cone Seat lug nuts have an extended seating surface that is designed to match the wider seating surface used on some aluminum wheels.

Product Features:
  • Guaranteed for life not to rust, chip, or peel.
  • Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
  • For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
See More

Dorman – Wheel Lug Nut: M14-1.50 Thread, Ball, Acorn, 1.122" Length, Chrome (Sold by each) (Part No.611-327)

Wheel Lug Nut: M14-1.50 Thread, Ball, Acorn, 1.122" Length, Chrome (Sold by each)

from

$5.99
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:
  • Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles.
  • Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Wheel Lug Nut: M14-1.50 Thread, Ball, Acorn, 1.122" Length, Chrome, 1 Pack (Part No.611-327.1)

Wheel Lug Nut: M14-1.50 Thread, Ball, Acorn, 1.122" Length, Chrome, 1 Pack

from

$5.99
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:
  • Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles.
  • Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

McGard – Chrome Tuner Style Cone Seat Wheel Lock Set (M12 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.25257)

Chrome Tuner Style Cone Seat Wheel Lock Set (M12 x 1.5 Thread Size) - Set of 4 Locks and 1 Key

from

$54.99
Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.

Product Features:
  • For use on “Tuner” wheels or wheels with very small lug nut holes.
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
  • For aluminum wheels only.
See More

McGard – Chrome Cone Seat SplineDrive Lug Nut Set (M12 x 1.5 Thread Size) – Set of 4 Lug Nuts (Part No.65357)

Chrome Cone Seat SplineDrive Lug Nut Set (M12 x 1.5 Thread Size) - Set of 4 Lug Nuts

from

$29.99
Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. SplineDrive lug nuts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. SplineDrive lug nuts take safety, dependability and style to the next level.

Product Features:
  • Guaranteed for life not to rust, chip, or peel.
  • Every McGard SplineDrive lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
  • For aluminum wheels only.
  • Requires 65100 Or 65300 Installation Tool sold separately
See More

McGard – Cone Seat- Under Hub Cap Wheel Lock Set (M12 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.24012)

Cone Seat- Under Hub Cap Wheel Lock Set (M12 x 1.5 Thread Size) - Set of 4 Locks and 1 Key

from

$39.99
Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
  • For use under wheel covers, center caps and hub caps.
  • Can also be used for exposed applications with optional (70005) black or (70006) chrome caps.
See More

McGard – Chrome Bulge Style Cone Seat Wheel Installation Kit for 5 Lug Vehicles (M12 x 1.5 Thread Size) (Part No.84537)

Chrome Bulge Style Cone Seat Wheel Installation Kit for 5 Lug Vehicles (M12 x 1.5 Thread Size)

from

$129.99
The convenient way to order wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. McGard manufactures wheel locks and lug nuts in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts are guaranteed for life not to rust, chip or peel. Designed and built for the real world. Think about it: harsh elements, nasty corrosive wheel cleaners, overzealous impact guns, loose fitting lug wrenches and lead-foot drivers. This kind of treatment destroys ordinary lug nuts. McGard lug nuts can take the punishment and keep your wheels looking beautiful. This product may contain globally sourced materials/components.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
  • For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
  • Set of 16 Lug Nuts, 4 Wheel Locks, 1 Key, & 1 Key Storage Pouch
See More

McGard – Black Bulge Style Cone Seat Wheel Installation Kit for 5 Lug Vehicles (M12 x 1.5 Thread Size) (Part No.84538)

Black Bulge Style Cone Seat Wheel Installation Kit for 5 Lug Vehicles (M12 x 1.5 Thread Size)

from

$169.99
The convenient way to order wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. McGard manufactures wheel locks and lug nuts in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts are guaranteed for life not to rust, chip or peel. Designed and built for the real world. Think about it: harsh elements, nasty corrosive wheel cleaners, overzealous impact guns, loose fitting lug wrenches and lead-foot drivers. This kind of treatment destroys ordinary lug nuts. McGard lug nuts can take the punishment and keep your wheels looking beautiful. This product may contain globally sourced materials/components.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
  • For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
  • Set of 16 Lug Nuts, 4 Wheel Locks, 1 Key, & 1 Key Storage Pouch
See More

McGard – Black SplineDrive 5 Lug Wheel Installation Kit (M12 x 1.5 Thread Size) (Part No.65557BK)

Black SplineDrive 5 Lug Wheel Installation Kit (M12 x 1.5 Thread Size)

from

$199.99
The convenient way to order Tuner wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts and wheel locks are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
  • For aluminum wheels only.
  • Set of 16 Lug Nuts, 1 Installation Tool, 4 Wheel Locks, 1 Key, & Key Storage Pouch
See More

McGard – Black Cone Seat Style Lug Nut (M12 x 1.5 Thread Size) – Box of 144 Lug Nuts (Part No.69431)

Black Cone Seat Style Lug Nut (M12 x 1.5 Thread Size) - Box of 144 Lug Nuts

from

$869.99
Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers.; Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough.

Product Features:
  • Guaranteed for life not to rust, chip, or peel.
  • Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
  • For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
  • Bulk box of 144.
See More

McGard – Black Cone Seat Bulge Style Lug Nuts (M12 x 1.5 Thread Size) – Box of 144 Lug Nuts (Part No.69415)

Black Cone Seat Bulge Style Lug Nuts (M12 x 1.5 Thread Size) - Box of 144 Lug Nuts

from

$829.99
Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers.; Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Bulge Style Cone Seat lug nuts have an extended seating surface that is designed to match the wider seating surface used on some aluminum wheels. Tough Nuts are designed and built for the real world, because life is tough.

Product Features:
  • Guaranteed for life not to rust, chip, or peel.
  • Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
  • For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
  • Bulk box of 144.
See More

McGard – Chrome Bulge Cone Seat Style Lug Nut (M12 x 1.5 Thread Size) – Box of 100 Lug Nuts (Part No.69412)

Chrome Bulge Cone Seat Style Lug Nut (M12 x 1.5 Thread Size) - Box of 100 Lug Nuts

from

$414.99
Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers.; Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Bulge Style Cone Seat lug nuts have an extended seating surface that is designed to match the wider seating surface used on some aluminum wheels. Tough Nuts are designed and built for the real world, because life is tough.

Product Features:
  • Guaranteed for life not to rust, chip, or peel.
  • Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
  • For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
  • Bulk box of 100.
See More

McGard – Gold SplineDrive Lug Nuts (M12 x 1.5 Thread Size) – Box of 50 Lug Nuts (Part No.65002GD)

Gold SplineDrive Lug Nuts (M12 x 1.5 Thread Size) - Box of 50 Lug Nuts

from

$399.99
Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. SplineDrive lug nuts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. SplineDrive lug nuts take safety, dependability and style to the next level.

Product Features:
  • Guaranteed for life not to rust, chip, or peel.
  • Every McGard SplineDrive lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome with gold PVD producing a superior finish while protecting against rust.
  • For aluminum wheels only.
  • Requires 65100 Or 65300 Installation Tool sold separately
See More

McGard – Black Cone Seat SplineDrive Lug Nuts (M12 x 1.5 Thread Size) – Box of 50 Lug Nuts (Part No.65002BK)

Black Cone Seat SplineDrive Lug Nuts (M12 x 1.5 Thread Size) - Box of 50 Lug Nuts

from

$399.99
Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. SplineDrive lug nuts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. SplineDrive lug nuts take safety, dependability and style to the next level.

Product Features:
  • Guaranteed for life not to rust, chip, or peel.
  • Every McGard SplineDrive lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
  • For aluminum wheels only.
  • Requires 65100 Or 65300 Installation Tool sold separately
See More

McGard – Chrome Cone Seat Style Lug Nut (M12 x 1.5 Thread Size) – Box of 100 Lug Nuts (Part No.69402)

Chrome Cone Seat Style Lug Nut (M12 x 1.5 Thread Size) - Box of 100 Lug Nuts

from

$354.99
Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers.; Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough.

Product Features:
  • Guaranteed for life not to rust, chip, or peel.
  • Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
  • For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
  • Bulk box of 100.
See More

McGard – Chrome Cone Seat SplineDrive Lug Nuts (M12 x 1.5 Thread Size) – Box of 50 Lug Nuts (Part No.65002)

Chrome Cone Seat SplineDrive Lug Nuts (M12 x 1.5 Thread Size) - Box of 50 Lug Nuts

from

$259.99
Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. SplineDrive lug nuts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. SplineDrive lug nuts take safety, dependability and style to the next level.

Product Features:
  • Guaranteed for life not to rust, chip, or peel.
  • Every McGard SplineDrive lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
  • For aluminum wheels only.
  • Requires 65100 Or 65300 Installation Tool sold separately
See More

McGard – Gold SplineDrive 5 Lug Wheel Installation Kit (M12 x 1.5 Thread Size) (Part No.65557GDC)

Gold SplineDrive 5 Lug Wheel Installation Kit (M12 x 1.5 Thread Size)

from

$204.99
The convenient way to order Tuner wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts and wheel locks are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome with gold PVD producing a superior finish while protecting against rust.
  • For aluminum wheels only.
  • Set of 16 Lug Nuts, 1 Installation Tool, 4 Wheel Locks & 1 Key
  • Clamshell packaging.
See More

McGard – Gold SplineDrive 5 Lug Wheel Installation Kit (M12 x 1.5 Thread Size) (Part No.65557GD)

Gold SplineDrive 5 Lug Wheel Installation Kit (M12 x 1.5 Thread Size)

from

$194.99
The convenient way to order Tuner wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts and wheel locks are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome with gold PVD producing a superior finish while protecting against rust.
  • For aluminum wheels only.
  • Set of 16 Lug Nuts, 1 Installation Tool, 4 Wheel Locks, 1 Key, & Key Storage Pouch
See More

McGard – Chrome SplineDrive 5 Lug Wheel Installation Kit (M12 x 1.5 Thread Size) (Part No.65557CN)

Chrome SplineDrive 5 Lug Wheel Installation Kit (M12 x 1.5 Thread Size)

from

$159.99
The convenient way to order Tuner wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts and wheel locks are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
  • For aluminum wheels only.
  • Set of 16 Lug Nuts, 1 Installation Tool, 4 Wheel Locks & 1 Key
  • Clamshell packaging.
See More

McGard – Chrome SplineDrive 5 Lug Wheel Installation Kit (M12 x 1.5 Thread Size) (Part No.65557)

Chrome SplineDrive 5 Lug Wheel Installation Kit (M12 x 1.5 Thread Size)

from

$144.99
The convenient way to order Tuner wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts and wheel locks are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
  • For aluminum wheels only.
  • Set of 16 Lug Nuts, 1 Installation Tool, 4 Wheel Locks, 1 Key, & Key Storage Pouch
See More

Dorman – Lug Nut (Part No.O8030832463DOR)

Lug Nut

from

$60.32
Lug Nut

Dorman – Wheel Lug Nut (Part No.O8030330055DOR)

Wheel Lug Nut

from

$9.64
Dorman’s Wheel Nuts are designed and constructed to strict engineering quality standards. All of Dorman’s Wheel Nuts are manufactured with high corrosion resistance to combat rust in any environment. Available in multiple styles and finishes, they match the original to blend in with the overall aesthetic design of your car. Chrome upgrade nuts are also available in multiple styles and colors to enhance the look of your wheels.

Product Features:
  • Wheel nut covers also available
  • Easy to install
  • Available in different quantities and packaging options
  • Chrome wheel nut and lock kits available (where applicable)
See More

Most Sold 2023 Acura TLX Wheel Studs

Explore our best-selling Acura parts for the 2023 TLX among 4 OEM and aftermarket options starting from $2.29.

Dorman – Wheel Stud: Serrated without Clip Head, M14-1.50 Thread Size, Right Hand Thread (Sold by each) (Part No.610-527)

Wheel Stud: Serrated without Clip Head, M14-1.50 Thread Size, Right Hand Thread (Sold by each)

from

$2.29
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Product Features:
  • Durable material – carbon steel meets SAE automotive industry standards for strength and hardness.
  • Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
  • Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
  • Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
See More

Dorman – Wheel Stud: Serrated without Clip Head, M14-1.50 Thread Size, RHT, 1 Pack (Part No.610-527.1)

Wheel Stud: Serrated without Clip Head, M14-1.50 Thread Size, RHT, 1 Pack

from

$2.49
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Product Features:
  • Durable material – carbon steel meets SAE automotive industry standards for strength and hardness.
  • Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
  • Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
  • Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
See More

Worldpac – WHEEL STUD (Part No.O8060833214DOR)

WHEEL STUD

from

$40.70
WHEEL STUD

Dorman – Serrated Wheel Stud (Part No.O8060781794DOR)

Serrated Wheel Stud

from

$3.54
When it comes to your wheels, don’t take chances. Dorman’s Wheel Studs are produced to strict engineering quality standards. Dorman’s engineers design these parts with tight tolerance on specific part characteristics to ensure proper fit and function, this design provides assurance your wheels will be tight every time they are removed and installed.

Product Features:
  • Direct replacement for a proper fit every time
  • Corrosion resistant
  • Double-ended studs as well as serrated bolts, and wheel bolts available
  • Over-length and under-length studs available for convenience and ease of installation
See More

Top-Rated Wheels and Tires Brands For Your 2023 Acura TLX

Shop for the best-rated brands offering Wheels and Tires and other products for your 2023 Acura TLXes. Below you’ll find some of our best rated Wheels and Tires from Schrader and McGard, and more. Wheels and Tires from these brands that fit a 2023 TLX start at just $24.99 and are rated as high as 4 stars. OEM and aftermarket Wheels and Tires don’t get more top quality, durable, and affordable than from the brands below.

Popular Schrader 2023 Acura TLX Wheels and Tires

When it comes to maintaining or upgrading your 2023 Acura TLX, using quality Wheels and Tires is essential to ensure durability and a perfect fit. Schrader ticks all of those boxes. We offer a wide selection of Schrader Wheels and Tires, specifically designed for the 2023 Acura TLX. With over 6 Schrader brand Wheels and Tires in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $41.99, with an average price of just $221.16. Plus, with over 70 customer reviews and an average rating of 4 stars, you can trust that our Schrader Wheels and Tires will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

EZ-sensor Programmable TPMS Sensor with Rubber Snap-in Valve, 24 Pack
from
$601.99
This product is not rated

EZ-sensor Programmable TPMS Sensor with Rubber Snap-in Valve, 24 Pack

“”

Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 12 Piece
from
$361.99
This product is not rated

Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 12 Piece

“”

Popular McGard 2023 Acura TLX Wheels and Tires

McGard auto parts is one of the highest quality Wheels and Tire brands in the market. Any 2023 Acura TLX owner should feel confident when installing genuine McGard parts in their vehicle. To ensure the best fit and performance for your 2023 TLX, Advance Auto Parts carries a full inventory of 23 McGard Wheels and Tires. Plus you will be keeping your Acura in peak condition while saving money because prices on these McGard Wheels and Tires range from $24.99 to $869.99, plus, with more than 10 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Wheels and Tires below will deliver on both quality and value.

FAQs for 2023 Acura TLX Wheels and Tires

Which Wheels and Tires are best-sellers for 2023 Acura TLXes?

Out of 42 Wheels and Tires that fit 2023 Acura TLXes, the following parts are the top sellers:

What’s the price range for 2023 Acura TLX Wheels and Tires?

Wheels and Tire prices for the 2023 Acura TLX start at $2.29 and go up to $869.99 for the most premium parts.

What’s the average price of a Wheels and Tire for a 2023 Acura TLX?

The average price for Wheels and Tires for the 2023 Acura TLX is $166.65. Keep in mind the variety of part types within our Wheels and Tire category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Wheels and Tires for other Acura TLX model years?

Yes, we currently carry Wheels and Tires for 10 model years of Acura TLXes between 2015 and 2025. Wheels and Tires are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2024.

What are the cheapest Wheels and Tires for my 2023 Acura TLX?

What are the top-rated Wheels and Tires that fit the 2023 Acura TLX?

Out of 162 reviews by customers, our 2023 Acura TLX Wheels and Tires have an average customer rating of . These are some of the highest-rated Wheels and Tire types for the 2023 Acura TLX and their top-rated products:

What types of Wheels and Tires do you sell for my 2023 Acura TLX?

As of 2/5/25, these are some of the most in-demand types of Wheels and Tires for a 2023 Acura TLX:

Can I get help with 2023 Acura TLX Wheels and Tire orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Acura Wheels and Tires and more.

What is your return policy for Acura TLX Wheels and Tires?

Advance Auto Parts keeps returns simple. For new Acura TLX Wheels and Tires and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.