2022 Volkswagen GTI Fuel and Emissions Systems

To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:

• Helps avoid premature fuel pump failure
• Lint free towel included
• Low suds formulation
• Removes harmful contaminants from the fuel tank

Relay

Original Equipment Manifold Absolute Pressure/Manifold Air Temperature Sensors are designed to perform in harsh environments such as extreme temperatures and vibration, thermal and mechanical shock. The Original Equipment Manifold Absolute Pressure sensor is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:

• Designed for under-hood environments
• All-silicon, solid-state microelectronic technology
• Temperature compensation
• Electromagnetic interference (EMI) protection
• Air temperature output

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

• CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
• CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
• CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

• CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
• CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
• CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

Evaporation Pres Sen

MAP Sensor

Ambient Temp Sensor

The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
• Application matched components ensures system operation in like new condition.

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Electrical parts control all aspects of vehicles on the road today. Replacing these components when they are starting to fail will ensure your vehicle has maximum performance and fuel economy. This is why Rein Automotive electrical parts are application specific and match the design and function of the OE parts.

Product Features:

• Tested to ensure maximum performance
• Manufactured to strict engineering standards/specifications in materials and tolerances
• Long life and durability
• Made by the OE manufacturer

Hitachi’s High Pressure Fuel Pumps (HPPs) are designed to enhance fuel volume delivery for exceptional operation and faster vehicle response. Our HPPs are a good alternative to the standard fuel pump for direct injection, supercharged, and turbocharged applications commonly found in todays vehicles. Pump housing is made of high strength aluminum to ensure durability while keeping weight low. Precision machined surfaces prevent fuel leakage/pressure drop while chemical resistant seals prevent premature wear from ethanol mixed fuels. Designed to meet the exact needs of each specific vehicle, Hitachi’s High Pressure Fuel Pumps are the premium choice. Hitachi is a Tier One OE supplier to the largest automobile manufacturers globally, delivering industry leading quality, and exceeding customer expectations with our products and service. Hitachi is bringing that same knowledge and expertise to the premium products we deliver in the Aftermarket because Quality Matters.

Product Features:

• These quality High Pressure Pumps provide exceptional operation with enhanced fuel volume delivery and faster vehicle response. Promotes a rise of fuel pressure from startup; reduces current consumption.
• Hitachi is a Tier 1 OE supplier for high pressure fuel pumps
• 100% NEW, never remanufactured
• Meets the OE performance and durability standards for this application
• High strength aluminum housing for light weight and durability
• Chemical resistant seals prevent premature wear from ethanol mixed fuels
• Precision machined surfaces prevent fuel leakage and subsequent pressure drop
• O-Ring/Gaskets included when applicable

Hitachi Automotive Systems manufactures and markets engine management, electric powertrain, drive control, and car information systems for major automotive original equipment manufacturers worldwide. As a part of the fuel delivery system, the fuel pump is the bloodline of a vehicle, sending a constant supply of pressurized fuel from the tank to the fuel injector. The pump creates positive pressure in the fuel lines, pushing fuel to the engine. Rely on Hitachi OE fuel pumps to disperse fuel accurately and meet optimal horsepower requirements for the modern vehicle!

Product Features:

• Constant and pressurized supply of fuel
• Accurate fuel dispensing
• Fuel flow meets the optimal horsepower requirements of modern vehicles
• OE quality and reliability

Hitachi’s High Pressure Fuel Pumps (HPPs) are designed to enhance fuel volume delivery for exceptional operation and faster vehicle response. Our HPPs are a good alternative to the standard fuel pump for direct injection, supercharged, and turbocharged applications commonly found in todays vehicles. Pump housing is made of high strength aluminum to ensure durability while keeping weight low. Precision machined surfaces prevent fuel leakage/pressure drop while chemical resistant seals prevent premature wear from ethanol mixed fuels. Designed to meet the exact needs of each specific vehicle, Hitachi’s High Pressure Fuel Pumps are the premium choice. Hitachi is a Tier One OE supplier to the largest automobile manufacturers globally, delivering industry leading quality, and exceeding customer expectations with our products and service. Hitachi is bringing that same knowledge and expertise to the premium products we deliver in the Aftermarket because Quality Matters.

Product Features:

• These quality High Pressure Pumps provide exceptional operation with enhanced fuel volume delivery and faster vehicle response. Promotes a rise of fuel pressure from startup; reduces current consumption.
• Hitachi is a Tier 1 OE supplier for high pressure fuel pumps
• 100% NEW, never remanufactured
• Meets the OE performance and durability standards for this application
• High strength aluminum housing for light weight and durability
• Chemical resistant seals prevent premature wear from ethanol mixed fuels
• Precision machined surfaces prevent fuel leakage and subsequent pressure drop
• O-Ring/Gaskets included when applicable

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

• Capable of delivering fuel at high pressures that can range from 2,000-2,800 PSI
• Mechanically driven high fuel flow pump enables rail pressure build up quickly for fast start times
• Fuel delivered directly into the engine combustion chamber for increased horsepower and fuel economy
• Meets OE specifications

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

• Capable of delivering fuel at high pressures that can range from 2,000-2,800 PSI
• Mechanically driven high fuel flow pump enables rail pressure build up quickly for fast start times
• Fuel delivered directly into the engine combustion chamber for increased horsepower and fuel economy
• Meets OE specifications

Hitachi’s High Pressure Fuel Pumps (HPPs) are designed to enhance fuel volume delivery for exceptional operation and faster vehicle response. Our HPPs are a good alternative to the standard fuel pump for direct injection, supercharged, and turbocharged applications commonly found in todays vehicles. Pump housing is made of high strength aluminum to ensure durability while keeping weight low. Precision machined surfaces prevent fuel leakage/pressure drop while chemical resistant seals prevent premature wear from ethanol mixed fuels. Designed to meet the exact needs of each specific vehicle, Hitachi’s High Pressure Fuel Pumps are the premium choice. Hitachi is a Tier One OE supplier to the largest automobile manufacturers globally, delivering industry leading quality, and exceeding customer expectations with our products and service. Hitachi is bringing that same knowledge and expertise to the premium products we deliver in the Aftermarket because Quality Matters.

Product Features:

• These quality High Pressure Pumps provide exceptional operation with enhanced fuel volume delivery and faster vehicle response. Promotes a rise of fuel pressure from startup; reduces current consumption.
• Hitachi is a Tier 1 OE supplier for high pressure fuel pumps
• 100% NEW, never remanufactured
• Meets the OE performance and durability standards for this application
• High strength aluminum housing for light weight and durability
• Chemical resistant seals prevent premature wear from ethanol mixed fuels
• Precision machined surfaces prevent fuel leakage and subsequent pressure drop
• O-Ring/Gaskets included when applicable

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

• Capable of delivering fuel at high pressures that can range from 2,000-2,800 PSI
• Mechanically driven high fuel flow pump enables rail pressure build up quickly for fast start times
• Fuel delivered directly into the engine combustion chamber for increased horsepower and fuel economy
• Meets OE specifications

Hitachi’s High Pressure Fuel Pumps (HPPs) are designed to enhance fuel volume delivery for exceptional operation and faster vehicle response. Our HPPs are a good alternative to the standard fuel pump for direct injection, supercharged, and turbocharged applications commonly found in todays vehicles. Pump housing is made of high strength aluminum to ensure durability while keeping weight low. Precision machined surfaces prevent fuel leakage/pressure drop while chemical resistant seals prevent premature wear from ethanol mixed fuels. Designed to meet the exact needs of each specific vehicle, Hitachi’s High Pressure Fuel Pumps are the premium choice. Hitachi is a Tier One OE supplier to the largest automobile manufacturers globally, delivering industry leading quality, and exceeding customer expectations with our products and service. Hitachi is bringing that same knowledge and expertise to the premium products we deliver in the Aftermarket because Quality Matters.

Product Features:

• These quality High Pressure Pumps provide exceptional operation with enhanced fuel volume delivery and faster vehicle response. Promotes a rise of fuel pressure from startup; reduces current consumption.
• Hitachi is a Tier 1 OE supplier for high pressure fuel pumps
• 100% NEW, never remanufactured
• Meets the OE performance and durability standards for this application
• High strength aluminum housing for light weight and durability
• Chemical resistant seals prevent premature wear from ethanol mixed fuels
• Precision machined surfaces prevent fuel leakage and subsequent pressure drop
• O-Ring/Gaskets included when applicable