2022 Lexus RX450h Drive Shafts and Axles
More 2022 Lexus RX450h Drive Shafts and Axles
Find your specific 2022 Lexus RX450h original or aftermarket Drive Shafts and Axles below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2022 Lexus RX450h Drive Shafts and Axles
Carquest Premium – New CV Axle Assembly (Part No.NCV902651)
from
$114.99
Manufactured to be an OE replacement, CV axles use 100% new materials and are engineered for ease of installation and long service.
Product Features:
See More
Product Features:
- All New Materials
- Engineered for OE Fitment
- -40 Degree Rated CV Boots
- Moly-Blend Grease in inner and outer joints
- New nut and mounting hardware included if required
Cardone – Rear Drive Shaft: Not Greasable, Direct Replacement (Part No.65-5042)
from
$818.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.
Product Features:
See More
Product Features:
- Built to match O.E. form, fit and function.
- 100% NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
Cardone – Rear Drive Shaft: Not Greasable, Direct Replacement (Part No.65-5036)
from
$1257.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.
Product Features:
See More
Product Features:
- Built to match O.E. form, fit and function.
- 100% NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
Dorman – Spindle Nut (Part No.K1002751713DOR)
from
$16.08
Spindle Nut
Anchor – Center Support Bearing Motor Mount: Rear, Center, 1 Piece (Part No.6082)
from
$119.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to LEXUS 99-20; TOYOTA 01-20;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1999-2020
- Weight approx: 2 Lbs
- BEARING ID / BORE: 1.1811 INCH / 30 MM
- CENTERLINE: 0.10 INCH / 3 MM
- MOUNT WIDTH: 7.00 INCH / 178 MM
- STYLE: ROUND FRAME
- WITH WINGS
- WITH ELEVATED MOUNTING PLATFORM
SKF – Driveshaft Support with Bearing (Part No.K1030158090SKF)
from
$228.02
Rugged SKF drive shaft support bearings are built to meet or exceed OE specifications. They are also built on the years of experience that SKF has earned designing and supplying bearings to the world’s largest OE manufacturers. Engineered and manufactured to specific application requirements that deliver precise drive shaft alignment and support. Center support bearings are pre-lubricated and sealed with metal reinforced seals to prevent contamination. Rubber support cushions are manufactured from durable rubber compounds that provide maximum support while isolating the driveline shaft from damaging vibration. Drive shaft support frames are constructed from high quality steel or aluminum that provides additional strength and long life in harsh environments.
Product Features:
See More
Product Features:
- OE Quality, fit and performance
- Precise driveshaft alignment and support
- Pre-lubricated and sealed
- Metal reinforced seals to prevent contamination
- Manufactured from durable rubber compounds
Anchor – Center Support Bearing Motor Mount: Front, 1 Piece (Part No.6083)
from
$108.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to LEXUS 01-20; TOYOTA 01-19;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 2001-2020
- Weight approx: 2 Lbs
- BEARING ID / BORE: 1.1811 INCH / 30 MM
- CENTERLINE: 0.10 INCH / 3 MM
- MOUNT WIDTH: 7.00 INCH / 178 MM
- STYLE: ROUND FRAME
- WITH WINGS
Popular 2022 Lexus RX450h Drive Shafts and Axles Categories
2022 Lexus RX450h Drive Shafts and Axles
Maybe you’re in the middle of a full rebuild of that 2022 Lexus RX450h. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 4 different Drive Shafts and Axles in our inventory ranging from $16.08 to $818.99. That means you can find the exact parts or products you need to keep that 2022 Lexus RX450h running smoothly.
Drive Shafts and Axles are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 2022 Lexus RX450h. Carquest Premium, Dorman, and Cardone are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Drive Shafts and Axles for your 2022 Lexus RX450h, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 2022 Lexus RX450h rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Drive Shafts and Axles Brands To Make Your 2022 Lexus RX450h Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2022 Lexus RX450h demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your RX450h the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.
FAQs for 2022 Lexus RX450h Drive Shafts and Axles
What are the most purchased Drive Shafts and Axles for the 2022 Lexus RX450h?
Out of 4 Drive Shafts and Axles for the 2022 Lexus RX450h, the most popular in our inventory are:
