2022 Land Rover Defender 90 Oil and Lubricants

Essential Oil and Lubricants for 2022 Land Rover Defender 90s

Valvoline – Full Synthetic High Mileage 10W-30 Engine Oil, Maximizes Engine Life, 1 Quart (Part No.VV180)

Full Synthetic High Mileage 10W-30 Engine Oil, Maximizes Engine Life, 1 Quart

from

$11.49
Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:


    Product Features:
    • Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
    • Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
    • 25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
    • Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
    • Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
    • Extends engine life: Valvoline Full Synthetic High Mileage with MaxLife Technology is designed to extend the life of higher mileage vehicles, providing superior protection against wear, friction, heat, and deposits
See More

Castrol – Edge 10W-30 Full Synthetic Motor Oil, 3X Stronger Protection, 1 Quart (Part No.152E4E)

Edge 10W-30 Full Synthetic Motor Oil, 3X Stronger Protection, 1 Quart

from

$11.99
Castrol EDGE 10W-30 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrol’s strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.

Product Features:


    Product Features:
    • 3X Stronger than the leading full synthetic (1)
    • 10X Better high stress performance (2)
    • 20,000 miles between oil changes (3)
    • (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
    • (2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
    • (3) Or one year, whichever comes first
    • Approved and Licensed Specifications:
    • Exceeds API SP/SN PLUS/SN/SM
    • ILSAC GF-6
See More

FRAM – 5W-20 Conventional Motor Oil, Low-Speed Pre-Ignition Control, 5 Quart (Part No.F610-5QT)

5W-20 Conventional Motor Oil, Low-Speed Pre-Ignition Control, 5 Quart

from

$24.99
FRAM Engine Oil SAE 5W-20 utilizes a blend of high quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-20 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control.
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Reliable engine protection: FRAM Conventional Oil 5W20 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
See More

FRAM – 20W-50 Conventional Motor Oil, Reliable Motor Protection, 1 Quart (Part No.F650)

20W-50 Conventional Motor Oil, Reliable Motor Protection, 1 Quart

from

$6.49
FRAM Engine Oil SAE 20W-50 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 20W-50 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 20W-50 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-Speed Pre-Ignition Control
  • Chain Wear Protection
  • Piston Cleanliness
  • Turbo-Compatibility
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • High-Quality Conventional Base Stocks: FRAM Engine Oil SAE 20W-50 utilizes a blend of high-quality conventional base stocks for reliable engine protection.
  • Versatile Compatibility: Suitable for modern gas-direct engines (GDI), turbo gas-direct engines (TGDI), and older carbureted or normally fuel-injected gasoline engine designs.
  • Meets Industry Standards: Complies with API SP, SN Plus, SN, SM, and ILSAC GF-6A, GF-5, and earlier API and ILSAC Service Categories.
  • Broad Operating Range: Designed to provide reliable engine protection across a broad range of operating conditions.
See More

FRAM – 5W-20 Full Synthetic Motor Oil, Faster Oil Flow at Start-Up, 1 Quart (Part No.F920)

5W-20 Full Synthetic Motor Oil, Faster Oil Flow at Start-Up, 1 Quart

from

$7.49
FRAM Engine Oil Full Synthetic SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) & turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories.

Product Features:
  • Faster oil flow at start-up!
  • Fuel efficiency gains over heavier grade oils
  • Excellent sludge and varnish protection
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-20 meets stringent API: SP, SN, SM, SL, SJ and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
  • Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for GDI and TGDI engines, thereby reducing the risk of pre-mature engine failure.
  • Versatile Compatibility: Suitable for gas-direct engine (GDI), turbo gas-direct engine (TGDI), carbureted, and normally fuel-injected engines, making it a versatile choice for various engine types.
See More

FRAM – 5W-30 Conventional Motor Oil, Low-Speed Pre-Ignition Control, 5 Quart (Part No.F620-5QT)

5W-30 Conventional Motor Oil, Low-Speed Pre-Ignition Control, 5 Quart

from

$24.99
FRAM Engine Oil SAE 5W-30 utilizes a blend of high quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control.
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Reliable engine protection: FRAM Conventional Oil 5W30 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
See More

LIQUI MOLY – Top Tec 0W-30 Full Synthetic Motor Oil, Highest Fuel Economy, 1 Liter (Part No.22156)

Top Tec 0W-30 Full Synthetic Motor Oil, Highest Fuel Economy, 1 Liter

from

$19.49
Top Tec 0W-30 Full Synthetic Motor Oil is engineered to deliver exceptional performance and efficiency for your engine. This low-SAPS motor oil minimizes friction, ensuring the highest fuel economy while providing optimum lubrication under all operating conditions. Its full synthetic composition and 0W-30 SAE weight make it ideal for extended oil change intervals, as recommended by manufacturers. Designed for compatibility with numerous Volkswagen and Audi vehicles, it is also suitable for select BMW diesel, Mercedes-Benz, and specific Porsche models. Whether you’re driving in extreme temperatures or under heavy loads, this oil ensures your engine operates at peak efficiency, offering long-lasting protection and reliability. Choose this premium motor oil for unmatched durability and value, keeping your engine running smoothly mile after mile.

Product Features:


    Product Features:
    • Minimizes friction
    • Highest fuel economy
    • Optimum lubrication under all operating conditions
    • Compatible with a wide range of premium vehicle brands, ensuring versatility and reliability for diverse engine types.
See More

Castrol – GTX High Mileage 5W-20 Synthetic Blend Motor Oil, Reduces Sludge & Wear, 1 Quart (Part No.15B6E6)

GTX High Mileage 5W-20 Synthetic Blend Motor Oil, Reduces Sludge & Wear, 1 Quart

from

$9.49
Castrol® GTX® High Mileage 5W-20 Synthetic Blend Motor Oil is the ultimate choice for extending engine life in high-mileage vehicles. Engineered with advanced Phosphorus Replacement Technology, it safeguards emission systems by reducing catalytic converter damage. This premium synthetic blend offers superior dispersancy to combat sludge buildup, exceptional protection against oil burn-off, and advanced additives to minimize engine wear. Seal conditioners work to reduce leaks, while its formulation improves fuel economy, meeting stringent API SP, ILSAC GF-6, and Ford specifications. Designed to exceed industry standards, this 5W-20 motor oil ensures reliable performance and durability, making it a smart investment for maintaining your vehicle’s efficiency and longevity.

Product Features:


    Product Features:
    • Phosphorus Replacement Technology helps extend emission system life
    • Superior dispersancy that fights sludge build up
    • Exceptional oil burn-off protection exceeding industry standards (1)
    • Seal conditioners to help reduce leaks
    • Advanced additives that minimize engine wear
    • Improved fuel economy (2)
    • (2) Based on API and ACEA volatility specifications
    • (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
    • Meets or exceeds the following specifications:
    • API SP/SN PLUS/SN/SM
    • ILSAC GF-6
    • Meets Ford WSS-M2C945-B1
    • Meets Ford WSS-M2C960-A1
See More

FRAM – High Mileage 5W-30 Full Synthetic Motor Oil, Reduces Oil Consumption, 5 Quart (Part No.F933-5QT)

High Mileage 5W-30 Full Synthetic Motor Oil, Reduces Oil Consumption, 5 Quart

from

$27.99
FRAM Full Synthetic High Mileage SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
See More

LIQUI MOLY – Top Tec 6600 0W-20 Full Synthetic Motor Oil, Improves Engine Efficiency, 1 Liter (Part No.22044)

Top Tec 6600 0W-20 Full Synthetic Motor Oil, Improves Engine Efficiency, 1 Liter

from

$20.49
Top Tec 6600 0W-20 Full Synthetic Motor Oil is engineered for superior performance, offering low friction and exceptional cold start behavior to enhance engine efficiency and reduce fuel consumption. Its advanced additive technology ensures outstanding wear protection, superb engine cleanliness, and greater oxidation stability, making it ideal for modern engines. With a low viscosity formula, this motor oil promotes smooth engine running and high lubrication reliability, even under demanding conditions. Designed for use with extended oil change intervals as specified by the manufacturer, it delivers long-lasting value and optimal engine care. Perfect for drivers seeking reliability and efficiency, this 1-liter solution is a smart choice for maintaining peak engine performance.

Product Features:


    Product Features:
    • Smooth engine running
    • Outstanding engine cleanliness
    • Excellent wear protection
    • High lubrication reliability
    • Enhanced cold start performance for improved engine efficiency and reduced fuel consumption.
See More

Castrol – Edge High Mileage 10W-30 Full Synthetic Motor Oil, Reduces Leaks & Deposits, 1 Quart (Part No.15979B)

Edge High Mileage 10W-30 Full Synthetic Motor Oil, Reduces Leaks & Deposits, 1 Quart

from

$11.99
Castrol EDGE High Mileage 10W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:


    Product Features:
    • Phosphorus Replacement Technology to help extend the life of the emission system
    • Reduces leaks, oil burnoff and power robbing deposits
    • 15,000 miles between oil changes (1)
    • (1) Or one year, whichever comes first
    • Meets or exceeds the following specifications:
    • API SP/SN PLUS/SN/SM
    • ILSAC GF-6
See More

Castrol – GTX High Mileage 5W-30 Synthetic Blend Motor Oil, Protects Against Sludge & Wear, 1 Quart (Part No.149D6A)

GTX High Mileage 5W-30 Synthetic Blend Motor Oil, Protects Against Sludge & Wear, 1 Quart

from

$9.49
Castrol® GTX® High Mileage 5W-30 Synthetic Blend Motor Oil is the ultimate choice for extending the life of high-mileage engines. Designed with advanced Phosphorus Replacement Technology, it safeguards emission systems by reducing catalytic converter damage while delivering exceptional protection against sludge, wear, and oil burn-off. This synthetic blend exceeds industry standards for volatility and dispersancy, ensuring your engine stays cleaner and performs better over time. With seal conditioners to minimize leaks and advanced additives to reduce engine wear, it’s engineered to keep your vehicle running smoothly. Compatible with API SP/SN PLUS/SN/SM and ILSAC GF-6 specifications, it meets Ford WSS-M2C946-B1 and WSS-M2C961-A1 standards, making it a reliable choice for a wide range of vehicles. Additionally, its improved fuel economy in 5W-30 grade adds value by optimizing performance and efficiency. Perfect for drivers seeking durability and superior engine protection in a convenient 1-quart size.

Product Features:


    Product Features:
    • Phosphorus Replacement Technology helps extend emission system life
    • Superior dispersancy that fights sludge build up
    • Exceptional oil burn-off protection exceeding industry standards (1)
    • Seal conditioners to help reduce leaks
    • Advanced additives that minimize engine wear
    • Improved fuel economy (2)
    • (1) Based on API and ACEA volatility specifications
    • (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
    • Meets or exceeds the following specifications:
    • API SP/SN PLUS/SN/SM
    • ILSAC GF-6
    • Meets Ford WSS-M2C946-B1
    • Meets Ford WSS-M2C961-A1
See More

FRAM – 10W-30 Conventional Motor Oil, Low-Speed Pre-Ignition Control, 5 Quart (Part No.F630-5QT)

10W-30 Conventional Motor Oil, Low-Speed Pre-Ignition Control, 5 Quart

from

$24.99
FRAM Engine Oil SAE 10W-30 utilizes a blend of high quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control.
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Suitable for modern engines: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs.
See More

Valvoline – Advanced Full Synthetic 0W-20 Motor Oil, Maximizes Engine Life, 5 Quart (Part No.881150)

Advanced Full Synthetic 0W-20 Motor Oil, Maximizes Engine Life, 5 Quart

from

$36.99
Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.

Product Features:
  • ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
  • 40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
  • 25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
  • EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
  • MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN, GM dexos 1 Gen 3
  • Enhanced Oil Stability: Resists oil breakdown 10 times better than industry standards, providing consistent performance and reliability.
  • Premium Additives: Contains premium anti-wear additives, superior antioxidants, and extra detergents for maximum performance and engine longevity.
See More

Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon (Part No.882505)

SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon

from

$59.99
Valvoline SAE 75W-90 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our detergent package-based formulation contains Full Synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance. Protect your gears with Valvoline, the No. 1 gear oil brand.

Product Features:
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION , ranging from -30F to 300F degrees
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
  • MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP HYPOID DIFFERENTIALS where APPI GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
  • MEETS OR EXCEEDS THE PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360
See More

Upgrade your 2022 Land Rover Defender 90 with Top-Quality Oil and Lubricants

When it comes to maintaining or upgrading your 2022 Land Rover Defender 90, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Land Rover or enhancing its overall performance, Oil and Lubricants are key to keeping your Defender 90 functioning at its best. At Advance Auto Parts, we offer a wide selection of 7 Oil and Lubricants for the 2022 Land Rover Defender 90, designed to meet your needs without breaking the bank. From Lubricant replacements to Motor Oil upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Oil and Lubricants for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Oil and Lubricants for your 2022 Land Rover Defender 90 at great prices. Our Oil and Lubricants inventory for this model ranges from just $7.49 to $68.99, with an average price of $31.49. Our 7 Oil and Lubricants in stock come from 3 trusted brands, so you’re sure to find the right part for your 2022 Land Rover Defender 90 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2022 Land Rover Defender 90, we stock popular OEM and aftermarket Oil and Lubricants from top names like Valvoline, and more. Valvoline Oil and Lubricants start at just $59.99 and boast an impressive 4.8 stars average rating from customers. With 364 customer reviews and counting, our 2022 Land Rover Defender 90 Oil and Lubricants have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Oil and Lubricant upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 2022 Land Rover Defender 90 is always ready to roll. We’re committed to providing you with everything you need to keep your Defender 90 in top shape, all in one place. Start shopping confidently below for your 2022 Land Rover Defender 90!

Best-Selling Lubricants for 2022 Land Rover Defender 90s

Enhance the driving experience in your Land Rover with 1 quality Lubricant components, starting at $59.99.

Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon (Part No.882505)

SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon

from

$59.99
Valvoline SAE 75W-90 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our detergent package-based formulation contains Full Synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance. Protect your gears with Valvoline, the No. 1 gear oil brand.

Product Features:
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION , ranging from -30F to 300F degrees
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
  • MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP HYPOID DIFFERENTIALS where APPI GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
  • MEETS OR EXCEEDS THE PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360
See More

Most Popular 2022 Land Rover Defender 90 Motor Oils

Customize your Land Rover with 6 Motor Oil products like Engine Oil, all priced under $68.99.

FRAM – 0W-20 Full Synthetic Motor Oil, Helps Extend Engine Life, 5 Quart (Part No.F900-5QT)

0W-20 Full Synthetic Motor Oil, Helps Extend Engine Life, 5 Quart

from

$27.99
FRAM Engine Oil Full Synthetic SAE 0W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 2 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 0W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 0W-20 and is a fully licensed GM dexos1 Gen 2 motor oil.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Excellent sludge and varnish protection
  • Outstanding thermal and oxidation stability, lowers oil vaporization and consumption at extreme conditions
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Ultimate engine protection: FRAM Full Synthetic 0W20 5 QT is specifically formulated to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 2 and ILSAC GF-6A specifications to provide the ultimate protection for your engine.
See More

FRAM – High Mileage 0W-20 Full Synthetic Motor Oil, Reduces Oil Consumption, 5 Quart (Part No.F913-5QT)

High Mileage 0W-20 Full Synthetic Motor Oil, Reduces Oil Consumption, 5 Quart

from

$27.99
FRAM Full Synthetic High Mileage SAE 0W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 0W-20 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 0W-20 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 0W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
See More

FRAM – 0W-20 Full Synthetic Motor Oil, Faster Oil Flow, 1 Quart (Part No.F900)

0W-20 Full Synthetic Motor Oil, Faster Oil Flow, 1 Quart

from

$7.49
FRAM Engine Oil Full Synthetic SAE 0W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 2 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 0W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 0W-20 and is a fully licensed GM dexos1 Gen 2 motor oil.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Excellent sludge and varnish protection
  • Outstanding thermal and oxidation stability, Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 0W-20 is formulated with high-quality synthetic base stocks and the latest additive technology to meet stringent API and ILSAC specifications, ensuring top-tier protection for your engine.
  • Advanced LSPI Prevention: Specifically designed to prevent low-speed pre-ignition (LSPI), a major concern for GDI and TGDI engines, reducing the risk of premature engine failure.
  • Versatile Compatibility: Suitable for gas-direct engine (GDI), turbo gas-direct engine (TGDI), carbureted, and normally fuel-injected engines, offering broad application across various engine types.
  • GM dexos1 Gen 2 Licensed: Fully licensed as GM dexos1 Gen 2 motor oil, ensuring it meets the high standards required for modern engines, including those from General Motors.
See More

FRAM – High Mileage 0W-20 Full Synthetic Motor Oil, Reduces Oil Consumption, 1 Quart (Part No.F913)

High Mileage 0W-20 Full Synthetic Motor Oil, Reduces Oil Consumption, 1 Quart

from

$7.49
FRAM Full Synthetic High Mileage SAE 0W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 0W-20 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 0W-20 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 0W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:
  • Faster oil flow at start-up
  • Fuel efficiency gains over heavier grade oils
  • Reduces oil cumsumption
  • Excellent sludge and varnish protection
  • Slows engine leaks
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
See More

LIQUI MOLY – Top Tec 6600 0W-20 Full Synthetic Motor Oil, Improves Engine Efficiency, 5 Liter (Part No.22046)

Top Tec 6600 0W-20 Full Synthetic Motor Oil, Improves Engine Efficiency, 5 Liter

from

$68.99
Top Tec 6600 0W-20 Full Synthetic Motor Oil is engineered for superior performance and efficiency. Its low-friction, fully synthetic formula ensures smooth engine operation, outstanding cleanliness, and excellent wear protection. The 0W-20 viscosity grade delivers exceptional cold start performance, enhancing engine efficiency while reducing fuel consumption. Designed with innovative additive technology, this oil provides high lubrication reliability, greater oxidation stability, and extended engine life. Ideal for use with extended oil change intervals as recommended by the manufacturer, it offers unmatched value for modern engines. Perfectly suited for drivers seeking top-tier protection and performance in a 5-liter package.

Product Features:


Product Features:
  • Smooth engine running
  • Outstanding engine cleanliness
  • Excellent wear protection
  • High lubrication reliability
  • Enhanced cold start performance for improved engine efficiency and reduced fuel consumption.
See More

LIQUI MOLY – Top Tec 6600 0W-20 Full Synthetic Motor Oil, Improves Engine Efficiency, 1 Liter (Part No.22044)

Top Tec 6600 0W-20 Full Synthetic Motor Oil, Improves Engine Efficiency, 1 Liter

from

$20.49
Top Tec 6600 0W-20 Full Synthetic Motor Oil is engineered for superior performance, offering low friction and exceptional cold start behavior to enhance engine efficiency and reduce fuel consumption. Its advanced additive technology ensures outstanding wear protection, superb engine cleanliness, and greater oxidation stability, making it ideal for modern engines. With a low viscosity formula, this motor oil promotes smooth engine running and high lubrication reliability, even under demanding conditions. Designed for use with extended oil change intervals as specified by the manufacturer, it delivers long-lasting value and optimal engine care. Perfect for drivers seeking reliability and efficiency, this 1-liter solution is a smart choice for maintaining peak engine performance.

Product Features:


Product Features:
  • Smooth engine running
  • Outstanding engine cleanliness
  • Excellent wear protection
  • High lubrication reliability
  • Enhanced cold start performance for improved engine efficiency and reduced fuel consumption.
See More

Top-Rated Oil and Lubricants Brands For Your 2022 Land Rover Defender 90

Shop for the best-rated brands offering Oil and Lubricants and other products for your 2022 Land Rover Defender 90s. Below you’ll find some of our best rated Oil and Lubricants from Valvoline, and more. Oil and Lubricants from these brands that fit a 2022 Defender 90 start at just $59.99 and are rated as high as 4.8 stars. OEM and aftermarket Oil and Lubricants don’t get more top quality, durable, and affordable than from the brands below.

Popular Valvoline 2022 Land Rover Defender 90 Oil and Lubricants

When it comes to maintaining or upgrading your 2022 Land Rover Defender 90, using quality Oil and Lubricants is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Oil and Lubricants, specifically designed for the 2022 Land Rover Defender 90. With over 1 Valvoline brand Oil and Lubricants in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $59.99. Plus, with over 364 customer reviews and an average rating of 4.8 stars, you can trust that our Valvoline Oil and Lubricants will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon
from $59.99
(364)
SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon
“2004 WJ Jeep Grand Cherokee, with Dana 35 rear. Happy Diff, quiet again, and exactly what the build tag calls for “75W-140 SYN” I like that it has ad”

FAQs for 2022 Land Rover Defender 90 Oil and Lubricants

Which Oil and Lubricants are best-sellers for 2022 Land Rover Defender 90s?

Out of 7 Oil and Lubricants that fit 2022 Land Rover Defender 90s, the following parts are the top sellers:

What’s the price range for 2022 Land Rover Defender 90 Oil and Lubricants?

Oil and Lubricant prices for the 2022 Land Rover Defender 90 start at $7.49 and go up to $68.99 for the most premium parts.

What’s the average price of a Oil and Lubricant for a 2022 Land Rover Defender 90?

The average price for Oil and Lubricants for the 2022 Land Rover Defender 90 is $31.49. Keep in mind the variety of part types within our Oil and Lubricant category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Oil and Lubricants for other Land Rover Defender 90 model years?

Yes, we currently carry Oil and Lubricants for 4 model years of Land Rover Defender 90s between 1994 and 2023. Oil and Lubricants are bought most frequently for the following model years: 2023, 2021, 1997, 1995, and 1994.

What are the cheapest Oil and Lubricants for my 2022 Land Rover Defender 90?

What are the top-rated Oil and Lubricants that fit the 2022 Land Rover Defender 90?

Out of 364 reviews by customers, our 2022 Land Rover Defender 90 Oil and Lubricants have an average customer rating of . These are some of the highest-rated Oil and Lubricant types for the 2022 Land Rover Defender 90 and their top-rated products:

What types of Oil and Lubricants do you sell for my 2022 Land Rover Defender 90?

As of 11/2/25, these are some of the most in-demand types of Oil and Lubricants for a 2022 Land Rover Defender 90:

Can I get help with 2022 Land Rover Defender 90 Oil and Lubricant orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Land Rover Oil and Lubricants and more.

What is your return policy for Land Rover Defender 90 Oil and Lubricants?

Advance Auto Parts keeps returns simple. For new Land Rover Defender 90 Oil and Lubricants and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.