2022 Jeep Wrangler Exhaust System Kits

MBRP XP Series is the performance exhaust of choice for the enthusiast who needs a system that can take anything that the road throws at it. This system is rugged sixteen gauge T409 construction can be counted on to withstand everything from salt to rocks, tar to grime.

Product Features:

• Built To Perform With More Pulling Power, Improved Throttle Response And Greater Fuel Efficiency
• Rugged Sixteen Gauge T409 Stainless Steel Construction Can Be Counted On To Withstand Everything From Salt To Rocks, Tar To Grime
• Drops Exhaust Gas Temperature By Up To 200 Degree Fahrenheit And Minimizes Backpressure
• From The Spiral Louvered High Flow Muffler To The Fully Mandrel Bent Tubing To Minimal Bend Degree Angles, Gets Exhaust Out Fast
• Specifically Tuned To Get The Optimal Sound From Pickup
• Everything Is Direct Fit To The OEM Hangers
• Bolt On, No Weld Design Makes Installation A No Hassle, One And A Half To Two Hour Project

The MagnaFlow 2018-2024 Jeep Wrangler Street Series Cat-Back Performance Exhaust System 19417 brings out the personality of your 3.6L 2018-2024 Jeep Wrangler with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Black Coated Welded-On Double Wall Angle Cut Folded Edge tips, this Jeep Wrangler exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep Wrangler’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19417 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19417 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

This Rebel Series cat-back exhaust delivers power and sound by adding horsepower and torque as measured on our in-house dyno. Dual polished tips exit in front of the rear passenger side tire to make this system look as good as it performs. Factory mounting locations provide a stable and hassle-free installation.

Product Features:

• Free Flowing Stainless Steel Muffler
• Hassle Free Installation
• MIG Welded For Strength

Unique sound and style is what this Rebel Series cat-back exhaust system delivers. 2 1/2″ mandrel bent, 304 stainless steel tubing is 100% hand MIG-welded for race proven strength and durability. A high flow stainless steel, muffler delivers a powerful exhaust tone. The system uses factory mounting locations for an easy install that stays put under any driving condition. Finished with rear exit, quad 3 ½” diameter, stainless steel tips with our signature laser-cut aFe POWER badge for a unique, custom-styled look. 2-1/2″ mandrel bent, 304 stainless steel tubing is less restrictive than stock. This allows maximum flow and low turbulence for increased torque, horsepower and improved throttle response. A primary, free-flowing stainless steel muffler absorbs the high pitch tones and balances exhaust pulses for a powerful exhaust note. Finished with high temp metallic black powder coating for the ultimate in corrosion resistance. Features a custom designed laser cut aFe logo tip brace with a bolt-on red powder coat backing plate to compliment the logo. This system is not compatible with factory receiver (tow hitch).

Product Features:

• High Flow Muffler
• Powerful Exhaust Tone
• 100 Percent MIG Welded

The MagnaFlow 2018-2024 Jeep Wrangler Street Series Cat-Back Performance Exhaust System brings out the personality of your 3.6L 2018-2024 Jeep Wrangler with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Jeep Wrangler exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep Wrangler’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19416 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19416 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

The MagnaFlow 2018-2024 Jeep Wrangler Street Series Cat-Back Performance Exhaust System brings out the personality of your 2.0L 2018-2024 Jeep Wrangler with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Jeep Wrangler exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep Wrangler’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19438 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19438 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

This Rebel Series cat-back exhaust delivers power and sound by adding horsepower and torque as measured on our in-house dyno. Dual polished tips exit in front of the rear passenger side tire to make this system look as good as it performs. Factory mounting locations provide a stable and hassle-free installation.

Product Features:

• Free Flowing Stainless Steel Muffler
• Hassle Free Installation
• MIG Welded For Strength

This Rebel Series cat-back exhaust system delivers quality, sound, performance and appearance for your Jeep JL 2 or 4 door model. Made from mandrel bent 409 stainless steel tubing for increased exhaust flow and performance, this dual rear exit system eliminates the primary muffler and uses a high flow, transverse rear muffler, finished in high temp black powder coating so it looks as good as it sounds. Dual 4-1/2″ stainless steel clamp-on tips with aFe POWER logos finish it off for the perfect combination of performance, value and style.

Product Features:

• Muffler Delivers A Powerful Exhaust Tone
• Custom Designed Rear Tip Brace w/Red aFe Power Logo
• 100% Hand MIG-Welded For Strength and Durability
• Unique Quad Exhaust Tips For A Unique Custom-Styled Look

This Rebel Series cat-back exhaust delivers power and sound by adding horsepower and torque as measured on our in-house dyno. Dual polished tips exit in front of the rear passenger side tire to make this system look as good as it performs. Factory mounting locations provide a stable and hassle-free installation.

Product Features:

• Free Flowing Stainless Steel Muffler
• Hassle Free Installation
• MIG Welded For Strength

This Rebel Series cat-back exhaust system delivers quality, sound, performance and appearance for your Jeep JL 2 or 4 door model. Made from mandrel bent 409 stainless steel tubing for increased exhaust flow and performance, this dual rear exit system eliminates the primary muffler and uses a high flow, transverse rear muffler, finished in high temp black powder coating so it looks as good as it sounds. Dual 4-1/2″ stainless steel clamp-on tips with aFe POWER logos finish it off for the perfect combination of performance, value and style.

Product Features:

• Tubing Outflows and Outlasts Stock Exhaust
• Stainless Steel Rear Transverse Muffler For Premium Sound
• 100% Hand MIG-Welded For Strength and Durability

MagnaFlow combines aggressive sound, free-flowing power and additional ground clearance for the best Jeep performance on and offroad. Features Black coated tips.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

This Rebel Series cat-back exhaust delivers power and sound by adding horsepower and torque as measured on our in-house dyno. Dual polished tips exit in front of the rear passenger side tire to make this system look as good as it performs. Factory mounting locations provide a stable and hassle-free installation.

Product Features:

• Free Flowing Stainless Steel Muffler
• Hassle Free Installation
• MIG Welded For Strength

aFe Rebel Series axle-back exhaust system complements your Jeep JL on and off-road. Mandrel bent 409 stainless steel tubing and free-flow muffler delivers increased exhaust flow, performance and tuned sound. MIG welded for durability the system uses factory mounting locations for an OE-style fit and stays put under any driving condition. Dual 4-1/2″ black powder coated stainless steel tips with aFe POWER logos makes this system look as good as it performs. A free-flowing, stainless steel, muffler is used to absorb high pitch tones producing a powerful sound and unleashing more horsepower and torque potential. OE-style bayonet hangers are used to maintain a stable pipe location during any driving conditions. The bayonet tip holds the hanger bushing in place for an OE style, long lasting fit.

Product Features:

• Free Flowing Stainless Steel Muffler
• Hassle Free Installation
• MIG Welded For Strength

The MagnaFlow 2018-2024 Jeep Wrangler Street Series Axle-Back Performance Exhaust System 19385 brings enhanced engine sound and dyno-proven performance to your 2.0L, 3.6L 2018-2024 Jeep Wrangler with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Jeep Wrangler exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features an axle-back layout designed to replace your Jeep Wrangler’s exhaust system from near the rear axle on back. With its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, your ride will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19385 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

Exhaust Kit

If you want proven performance gains, more ground clearance and sound from your Jeep JL 3.6L 2 or 4 door, this Mach Force-XP cat-back exhaust system is what you need. 2-1/2″ mandrel-bent 409 stainless steel tubing and 14″ high flow muffler improves exhaust flow for increased horsepower and torque. In-house dyno testing resulted in gains of up to +9 horsepower and +8 lbs. x ft. of torque and delivers a noticeable exhaust tone. The Hi-Tuck designed tailpipe “tip” gives you extra clearance during extreme angle climbs or descents and an “Old School” traditional Jeep look. Factory-style hangers, ball flange connection and quality hardware are included for a hassle-free install.

Product Features:

• Outlasts and Outperforms Stock Exhaust
• Hi-Tuck Design For Clearance and Greater Approach Angles
• 100 Percent Hand MIG-Welded For Strength and Durability
• Factory Style Bayonet Hangers

If you want proven performance gains, more ground clearance and sound from your Jeep JL 3.6L 2 or 4 door, this Mach Force-XP cat-back exhaust system is what you need. 2-1/2″ mandrel-bent 409 stainless steel tubing and 14″ high flow muffler improves exhaust flow for increased horsepower and torque. In-house dyno testing resulted in gains of up to +9 horsepower and +8 lbs. x ft. of torque and delivers a noticeable exhaust tone. The Hi-Tuck designed tailpipe “tip” gives you extra clearance during extreme angle climbs or descents and an “Old School” traditional Jeep look. Factory-style hangers, ball flange connection and quality hardware are included for a hassle-free install.

Product Features:

• Outlasts and Outperforms Stock Exhaust
• Hi-Tuck Design For Clearance and Greater Approach Angles
• 100 Percent Hand MIG-Welded For Strength and Durability
• Factory Style Bayonet Hangers

The MagnaFlow 2018-2024 Jeep Wrangler Off-Road Pro Series Cat-Back Performance Exhaust System 19431 brings additional off-roading prowess and our deep signature exhaust note to your 3.6L 2018-2024 Jeep Wrangler with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 19431 is engineered to produce Very Aggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Jeep Wrangler exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 19431’s emissions-legal cat-back design replaces all your truck’s exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On Single Wall Turndown Cut Edge tips. Exhaust system 19431 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow’s limited lifetime warranty.

Product Features:

• Available for gas or diesel trucks and SUV’s
• 100% Stainless Steel
• High flow straight through design

If you want proven performance gains, more ground clearance and sound from your Jeep JL 3.6L 2 or 4 door, this Mach Force-XP cat-back exhaust system is what you need. 2-1/2″ mandrel-bent 409 stainless steel tubing and 14″ high flow muffler improves exhaust flow for increased horsepower and torque. In-house dyno testing resulted in gains of up to +9 horsepower and +8 lbs. x ft. of torque and delivers a noticeable exhaust tone. The Hi-Tuck designed tailpipe “tip” gives you extra clearance during extreme angle climbs or descents and an “Old School” traditional Jeep look. Factory-style hangers, ball flange connection and quality hardware are included for a hassle-free install.

Product Features:

• Outlasts and Outperforms Stock Exhaust
• Hi-Tuck Design For Clearance and Greater Approach Angles
• 100 Percent Hand MIG-Welded For Strength and Durability
• Factory Style Bayonet Hangers

aFe’s Mach Force-Xp axle-back exhaust system delivers form and function to your Jeep JL. This efficient, 2 1/2″ mandrel-bent Hi-Tuck system delivers extra ground clearance when off-roading by replacing the stock, low-hanging muffler assembly. This stainless steel system utilizes the factory front resonator pipe to produce a very aggressive exhaust tone unleashing all available horsepower and torque.

Product Features:

• Cost Effective System
• Tubing Is Less Restrictive Than Stock
• Increased Horsepower And Torque
• Aggressive Sound

This durable, purpose-built, cat-back exhaust system improves clearance over rough terrain for the Jeep JK adventurist who wants it all. Large, 2 ½” to 3″ mandrel-bent 409 stainless steel tubing outflows the restrictive OE exhaust to increase torque and horsepower while a free-flowing muffler delivers a powerful, performance tone. The ROCK BASHER’S unique pre-axle turn down tip handles off-road obstacles and utilizes factory mounts for a qui ck and simple install. This cat-back exhaust system has a turn down tip under the vehicle, before the rear axle, to take on rough terrain and off-road obstacles. No more smashed tips. An 18″ long, free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound while unleashing all available horsepower and torque.

Product Features:

• Free Flowing Stainless Steel Muffler
• Aggressive Sound
• MIG Welded For Strength
• Steel Band Clamps

This durable, purpose-built, cat-back exhaust system for the Jeep Wrangler JL 2 door improves clearance over rough terrain for the adventurist who wants it all. Large, 3″ mandrel-bent 409 stainless steel tubing outflows the restrictive factory exhaust to deliver gains of up to +9 horsepower and +8 lbs. x ft. of torque, as measured on our in-house dyno. The free-flowing muffler delivers a powerful, performance tone while the ROCK BASHER’S shortened pre-axle turndown tip handles off-road obstacles. This system utilizes factory mounts for a quick and simple install.

Product Features:

• 409 Stainless Steel Tubing For Unrestrictive Exhaust Flow
• Free Flowing Stainless Steel Muffler
• Muffler Has A Powerful Aggressive Performance Tone
• Shortened Pre-Axle Turn Down Exit Offers More Ground Clearance

Our Black Series performance exhaust systems offer a true murdered-out style without compromising on quality and performance. With fully sealed seams to resist rust you can count on this system to really hold up. The black coat finishing is recommended for driving areas that are not exposed to salt and other chemicals on the road.

Product Features:

• Black Series Axle Back System
• Built To Perform Designed To Maximize Exhaust Flow And Minimize Exhaust Temperatures Your Truck Will Use Less Gas, Last Longer And Perform Better
• Dyno Proven, Undergone Countless Hours On Our In-House Mustang 1100 AWD-SE Chassis Dynomometer, Hundreds Of Miles On Road And Track And Numerous Tweaks To Get The Most Out Of The Truck
• Sound And Style Specifically Tuned To Get The Optimal Sound From The Pickup
• Built To Perform Designed To Maximize Exhaust Flow And Minimize Exhaust Temperatures Your Ride Will Use Less Gas, Last Longer And Perform Better
• Easy Installation, Bolt-On, No Weld Design Makes Installation A No Hassle One And A Half To Two Hour Project

Built from heavy duty aluminized steel our Installer Series performance exhaust systems offer a value price without compromising on the quality built into every component. While the seams are a major point of rust through with some budget systems our fully sealed tubing adds years to your system. Constructed to the same specifications as our top of the line Pro Series.

Product Features:

• Mandrel-Bent 2.5 Inch Tubing And Unique Routing Design
• High Clearance Single Rear Exit For Rough Terrain
• Major Point Of Rust Through With Some Budget Systems Our Fully Sealed Tubing Adds Years To Your System
• MBRP Performance Exhaust System Has Been Specifically Tuned To Get The Optimal Sound From Pickup
• Bolt-On, No Weld Design Makes Installation A No Hassle One

MBRPs XP Series is the performance exhaust of choice for the enthusiast who needs a system that can take anything that the road throws at it. This systems rugged sixteen gauge T409 construction can be counted on to withstand everything from salt to rocks, tar to grime.

Product Features:

• High Clearance
• 2 1/2 Inch Mandrel Bent Tubing
• T409 Stainless Steel
• Turndown Exit
• Moderate Sound
• Limited Lifetime Warranty