from

$2005.00

Yukon 30 spline 4340 Chrome-Moly axle & Grizzly Locker kit for Jeep TJ, XJ, YJ & ZJ. This kit contains a 4340 Chrome-Moly axle kit, Grizzly locker (fits 3.73 & up), disconnect block-off kit & two Spicer U/Joints.

Product Features:

30 spline inner and 27 spline outer
Fits Dana Spicer 30 in XJ, YJ and TJ
Includes inner and outer 4340 Chromoly axles, Spicer U-Joints, Yukon Grizzly Locker, carrier bearings and races.

from

$186.99

84-90XJ, 97 & upTJ, 87 & up Wrangler, 16.63″ left hand replacement inner axle for Dana 30, 297X.

Product Features:

Fits Jeep Wrangler and Cherokee front with Dana Spicer 30
4340 Chromoly
Left hand inner axle
16.63″ from end of splines to center of u-joint bore

from

$294.99

Yukon 1541H alloy left hand rear axle for Model 35 (drum brakes) with a 54 tooth, 2.7″ ABS ring. axle has a length of 30-11/16″ inches and 27 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a C-clip axle.

Product Features:

27 spline
5 x 4.5″ bolt pattern
30 11/16″ long
Fits AMC Model 35 in 1990-2001 XJ, 1990-1995 YJ and 1997-2002 TJ
Left hand side
Drum brakes only

from

$304.99

Yukon 4340 Chrome Moly alloy left hand rear axle for Model 35 heavy duty (drum brakes) with a 54 tooth, 2.7″ ABS ring. axle has a length of 30-11/16″ inches and 27 splines. Yukon 4340 Chrome Moly alloy axles offer a strength increase over stock while retaining a low cost. Yukon 4340 Chrome Moly alloy rear axles come with a limited lifetime warranty against manufacturing defects. This is a C-clip axle.

Product Features:

Fits Jeep AMC Model 35 with c-clips
4340 Chromoly
Left hand side
27 spline
30 11/16″ long

from

$1850.00

USA Standard 30 spline 4340 Chrome-Moly axle & Grizzly Locker kit for Jeep TJ, XJ, YJ & ZJ. This kit contains a 4340 Chrome-Moly axle kit, Grizzly locker (fits 3.73 & up), disconnect block-off kit & two Spicer U/Joints.

Product Features:

30 spline inner and 27 spline outer
Fits Dana Spicer 30 in XJ, YJ and TJ
Includes inner and outer 4340 Chromoly axles, two Spicer Joints, Yukon Grizzly locker, and disconnect block-off kit

from

$304.99

4340 Chrome Moly alloy axle for Model 35, HD, C/clip, drum brakes, left hand. Yukon 4340 Chrome Moly alloy axles offer a strength increase over stock while retaining a low cost. Yukon 4340 Chrome Moly alloy rear axles come with a limited lifetime warranty against manufacturing defects.

Product Features:

30 spline
5 lug
30 11/16″ long
Fits AMC Model 35 in 1990-2006 Jeep
Left hand side
4340 Chromoly

from

$279.99

Yukon 1541H alloy right hand rear axle for Model 35 with a 51 tooth, 2.7″ ABS ring. axle has a length of 29-1/4″ and 27 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a C-clip axle.

Product Features:

27 spline
5 x 4.5″ bolt pattern
29.25″ long
Fits AMC Model 35 in 1990-1999 Jeep
Right hand side

from

$10.29

Formulated to meet the specific requirements of Subaru vehicles equipped with conventional (non-CVT) transmissions up to model year 2005. Recommended for service-fill in all Subaru automatic transmissions where SUBARU ATF HP is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. Idemitsu is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. Idemitsu application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:

Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Advanced anti-wear technology provides maximum protection to gears and bearings
Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Advanced anti-wear technology provides maximum protection to gears and bearings

from

$69.99

Valvoline SAE 75W-140 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our formulation provides exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity and wear resistance, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. It’s recommended for conventional rear axles and transmissions requiring EP gear lubes under high speed, high load, high torque and high horsepower conditions.

Product Features:

EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -22F to 390F degrees
REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4
MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Ford M2C-192A, GM 12346140, Chrysler MS-8985 and API GL-5

from

$14.49

Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

Product Features:

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$168.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$41.99

Royal Purple Motor Oil is a specially formulated multi viscocity oil for use in gasoline and diesel engines of all types from cars and trucks to SUVs, motorcycles and boats. Royal Purple(R) Motor Oil with Synerlec(R) additive technology reduces friction, which results in a 1-3 percent increase in horsepower, lowers operating temperatures, provides superior corrosion protection, improves fuel economy, reduces emissions and extends oil life. A.P.I. Certified.

Product Features:

Better wear protection
Increased fuel efficiency
Better protection of the expensive catalytic emission system
Improved compatibility with fuels containing ethanol
Superior corrosion protection
Meets ILSAC GF-5 and Dexos1 performance requirements

from

$14.79

Product Features:

Technologically advanced, full synthetic formulation provides superior transmission life
Engineered with superior base oils to ensure superb low and high temperature performance
Certified and approved for all Chrysler cars and trucks that require ATF+4«, Mopar ATF+3«, ATF+2«, ATF+2 Type 7176«, or ATF+«
Meets or Exceeds Fiat Chrysler ATF+4« requirements.
Packaged in a convenient 1-quart size for easy handling and precise application during maintenance.

from

$148.99

Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive

from

$122.99

Carquest CV Axle’s are made from the finest materials using premium steel, boot, and grease. Carquest CV Axles are designed to exceed the original equipment specifications for a trouble free ride.High moly CV joint grease with stainless-steel boot bands

from

$108.99

Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$602.99

Has your front axle shaft or U-joint failed? Omix-ADA offers complete front Jeep axle shaft assemblies providing everything you need for a simple installation. Slide the old parts out and slide the new parts in. You’ll be back on the road in no time.

Product Features:

Right Side
With ABS
OE Style
Direct Fit

from

$169.99

C/V AXLE

from

$103.99

Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$135.99

Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$551.99

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$890.99

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$929.99

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$397.99

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$588.99

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$332.99

CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:

Built to match O.E. form, fit and function.
100% NEW universal joints are installed to ensure proper fit and optimal performance.
All slip yokes are lubricated to prevent premature wear.
Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
Measurement Method: Measurement is taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft.

from

$568.99

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$595.99

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

2022 Jeep Cherokee Drivetrains

Yukon Gear – 30 Spline 4340 Chrome-Moly Axle & Grizzly Locker Kit For Jeep TJ, XJ, YJ & ZJ (Part No.21757)

USA Standard Gear – 4340 Chrome-Moly Axle, XJ/TJ/YJ Lh Inner, 27Spl, Uses 5-760X U/Joint (Part No.35081)

Yukon Gear – 1541H Alloy Left Hand Rear Axle For Model 35 (Drum Brakes) With A 54 Tooth, 2.7" ABS Ring (Part No.21145)

Yukon Gear – 4340 Chrome Moly Alloy Left Hand Rear Axle For Model 35 Heavy Duty (Drum Brakes) (Part No.21304)

USA Standard Gear – 30 Spline 4340 Chrome-Moly Axle & Grizzly Locker Kit For Jeep TJ, XJ, YJ & ZJ (Part No.35177)

Yukon Gear – 4340 Chrome Moly Alloy Axle For Model 35, HD, C/Clip, Drum Brakes, Left Hand (Part No.21722)

Yukon Gear – 1541H Alloy Right Hand Rear Axle For Model 35 With A 51 Tooth, 2.7" ABS Ring (Part No.21139)

Idemitsu – Type HP Automatic Transmission Fluid , 1 Quart (Part No.10107-042F)

Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Gallon (Part No.887344)

Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

Crown Auto Jeep Replacmnt – Dana 35, Non Limited Slip, 27 Spline (Part No.4740670)

Royal Purple – High Performance 5W-30 Synthetic Engine Oil, Better Wear Protection, 5 Quart (Part No.51530)

Castrol – Transmax ATF+4 Transmission Fluid, Superior Transmission Life, 1 Quart (Part No.15A9FA)

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV82505)

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV82504)

Omix – Axle Shaft Assembly; for Dana 30; 92-06 Jeep Wrangler TJ (Part No.16523.18)

Carquest Premium – C/V AXLE (Part No.NCV752921)

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV82511)

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV82010)

Dorman – Drive Shaft: Adjustable (Part No.976-137)

Dorman – Drive Shaft: Greaseable, Adjustable (Part No.976-166)

Dorman – Drive Shaft (Part No.986-516)

Dorman – Drive Shaft (Part No.938-129)

Dorman – Drive Shaft: Adjustable (Part No.976-175)

Cardone – Drive Shaft: Not Greasable, Direct Replacement (Part No.65-9749)

Dorman – Drive Shaft (Part No.976-045)

Dorman – Drive Shaft: Adjustable (Part No.976-108)

Royal Purple – High Performance 5W-30 Synthetic Engine Oil, Better Wear Protection, 5 Quart (Part No.51530)

Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (Part No.889785)

Dorman – Axle Output Shaft Kit (Part No.630-038)

Dorman – Drive Shaft (Part No.986-516)

Carquest Premium – CV Axle Assembly (Part No.NCV82065)