2022 GMC Canyon Engine Cooling Parts
More 2022 GMC Canyon Engine Cooling Parts
Find your specific 2022 GMC Canyon original or aftermarket Engine Cooling Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2022 GMC Canyon Engine Cooling Parts
Carquest Premium – Coolant Temperature Sensor (Part No.WTC1413)
from
$9.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
NTK – Engine Coolant Temperature Sensor (Part No.EF0174)
from
$39.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.
Product Features:
See More
Product Features:
- OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
- FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
- THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
Carquest Premium – Coolant Temperature Sensor (Part No.WTC1286)
from
$8.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – Coolant Temperature Sensor (Part No.WTC1002)
from
$20.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
ACDelco – GM Original Equipment Engine Coolant Temperature Sensor (Part No.C6020424897ACD)
from
$43.22
The ACDelco GM Original Equipment Engine Coolant Temperature Sensor monitors the engine temperature, and is a GM-recommended replacement for your vehicle’s original component. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. This original equipment engine coolant temperature sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Undergo the same stringent testing process as the original part
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Dorman – Thermostat Assembly: Includes Housing, Bolts, and Gasket, 212 Degrees (Part No.902-2121)
from
$141.99
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
Dorman – Thermostat Assembly: Includes Housing, Thermostat, and Gasket, 190 Degrees (Part No.902-847)
from
$49.49
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
Motorad – Integrated Thermostat Housing: With Seal, 187 Degrees (Part No.538-187)
from
$60.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – Integrated Thermostat Housing: With Seal, 187 Degrees (Part No.48718)
from
$48.49
Carquest Premium Integrated Housing Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- All-in-one, bolt-on solution that includes everything needed for a complete job
- Includes thermostat, seal and housing
- Easy, one step fit and installation
- No special tools required
- Meets or exceeds all OEM standards
Dorman – Thermostat Assembly: Includes Housing, Sensor, and Gasket, 203 Degrees (Part No.902-2125)
from
$111.99
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
ACDelco – Engine Water Pump (Part No.252-962)
from
$163.99
An ACDelco Professional, premium aftermarket Engine Water Pump circulates coolant through your vehicle’s radiator and engine system to help maintain proper engine temperature and performance. The gaskets, seals, and O-rings packaged with this Professional, premium aftermarket water pump help guarantee that all necessary parts are available for trouble-free installation. ACDelco Professional Water Pumps are a high quality replacement for many vehicles on the road today. This premium aftermarket replacement engine water pump is manufactured to meet your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- All Makes water pumps fit GM vehicles as well as a wide range of non-GM vehicles
- Thoroughly tested for reliable, leak-free performance
- Coated seals support seal longevity and durability
- Heat-treated shaft assemblies provide superior strength and durability over non-treated assemblies
- High-quality bearings are permanently sealed and lubricated for greater durability and long life
- Come with premium, high-quality replacement components needed for trouble-free and accurate installation
- Uniform wall sections and smooth coolant-flow cavities for efficient operation
- Cast-iron or aluminum design, depending on vehicle application
ACDelco – Engine Water Pump (Part No.252-901)
from
$242.99
An ACDelco Professional, premium aftermarket Engine Water Pump circulates coolant through your vehicle’s radiator and engine system to help maintain proper engine temperature and performance. The gaskets, seals, and O-rings packaged with this Professional, premium aftermarket water pump help guarantee that all necessary parts are available for trouble-free installation. ACDelco Professional Water Pumps are a high quality replacement for many vehicles on the road today. This premium aftermarket replacement engine water pump is manufactured to meet your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- All Makes water pumps fit GM vehicles as well as a wide range of non-GM vehicles
- Thoroughly tested for reliable, leak-free performance
- Coated seals support seal longevity and durability
- Heat-treated shaft assemblies provide superior strength and durability over non-treated assemblies
- High-quality bearings are permanently sealed and lubricated for greater durability and long life
- Come with premium, high-quality replacement components needed for trouble-free and accurate installation
- Uniform wall sections and smooth coolant-flow cavities for efficient operation
- Cast-iron or aluminum design, depending on vehicle application
ACDelco – GM Original Equipment Water Pump (Part No.G3000744332ACD)
from
$240.47
GM Original Equipment Water Pumps are the best way to make sure you have the proper heat protection for the engine in your car, truck or SUV. Built to meet the latest manufacturer-specified designs, GM OE Water Pumps, in both cast-iron and aluminum, are thoroughly leak-tested, and feature uniform wall sections and smooth coolant-flow cavities for efficient operation and remarkable engine protection. High-quality bearings, heat-treated impellers and coated seals mean long life and trouble-free ownership. Trust ACDelco to protect your vehicle’s vital systems.
Product Features:
See More
Product Features:
- Completely pressure-tested for leak-free performance
- High-quality bearings and heat-treated impellers for long life
- Designed for smooth flow of coolant for superior protection
Driveworks Water Pumps – Water Pump (Part No.58-653)
from
$153.99
Using advanced re-engineering materials and processes, our remanufactured water pumps match O.E. fit and performance. Each unit is supplied with new, unitized seals and the proper O.E.-specified bearing design to meet the specific radial and axial load re
Product Features:
See More
Product Features:
- 100% leak testing and hub-pull testing ensures reliable performance.
- O.E.-supplied NEW unitized seals ensure long-lasting, trouble-free performance.
- The proper O.E. specified bearing design is installed to meet the specific radial and axial load requirements of each application. This ensures longer bearing life and reliable performance.
- Thermostat seal and mounting gasket are supplied for ease of installation (where applicable).
Carquest Premium – Engine Water Pump: Gasket/Seals Included (Part No.T1235)
from
$124.99
This premium water pump uses new high quality components and is designed to meet or exceed OE specifications. This pump is 100% tested to ensure quality. Bearings, gaskets, seals, impeller, hub and housing are all designed for long-lasting service life. All necessary gaskets and seals are included.
Product Features:
See More
Product Features:
- Built to meet or exceed OE fit, form and function.
- All components necessary for installation are supplied with pump
- 100% tested for reliable performance
- Follow all enclosed instructions to maximize pump life and validate warranty
Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T2395)
from
$119.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.
Product Features:
See More
Product Features:
- 100% tested for reliable performance
- Durable housing features precisely machined mounting surface for proper sealing and fitment
- Equipped with weep chamber or similar feature to help prevent unnecessary replacement
- Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
- All gaskets or seals necessary for water pump are included
- This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
- This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
- This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
Carquest Premium – Thermal Fan Clutch – Severe Duty Reverse Rotation (Part No.215113)
from
$93.99
Product Features:
See More
- Designed, tested, and built by application
- OE performance, fit, and appearance
- Precision machined
- Out of box installation
Carquest Premium – Universal Fan Clutch – Heavy-Duty Truck Fan Drive (Part No.216015)
from
$138.99
Product Features:
See More
- OE performance, fit, and appearance
- Designed, tested, and built by application
- Precision machined
- Out of box installation
Carquest Premium – Universal Fan Clutch – 7" Thermal Heavy Duty (Part No.215138)
from
$94.99
Product Features:
See More
- Designed, tested, and built by application
- OE performance, fit, and appearance
- Precision machined
- Out of box installation
Carquest Premium – Universal Fan Clutch (Part No.216103)
from
$535.99
Product Features:
See More
- Designed, tested, and built by application
- OE performance, fit, and appearance
- Precision machined
- Out of box installation
Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.54218CD)
from
$16.99
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.
Product Features:
See More
Product Features:
- Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
- Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
- Seamless fit – reverse-engineered from the original equipment to fit perfectly
- Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
Dorman – Expansion Tank Cap (Part No.G1040691091DOR)
from
$9.40
Dorman offers a variety of Engine Coolant Recovery Tank Caps for a range of applications. All Dorman Engine Coolant Recovery Tank Caps are constructed of high-quality plastic. They effectively protect the cooling system by providing a tight seal against the elements.
Product Features:
See More
Product Features:
- Save time, money and labor by replacing only the Cap – instead of the entire Engine Coolant Recovery Tank
- Direct replacement for a proper fit every time
- A necessary safety item – prevents coolant from splashing and/or leaking
- Available in diverse styles, including screw-on and snap-on
Carquest Premium – Radiator Cap: 15 PSI (Part No.10248)
from
$14.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.82594)
from
$11.29
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.
Product Features:
See More
Product Features:
- Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
- Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
- Seamless fit – reverse-engineered from the original equipment to fit perfectly
- Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
ACDelco – GM Original Equipment Expansion Tank Cap (Part No.G1040465619ACD)
from
$17.61
An ACDelco GM Original Equipment Expansion Tank Cap is a spring loaded cap that seals the radiator filler neck or surge tank, and is a GM-recommended replacement for your vehicle’s original component. It maintains pressure on the cooling system while the engine is operating, which raises the boiling point of the engine coolant. It also replenishes the system with coolant from the expansion tank (if equipped) when the engine cools off. This original equipment radiator cap has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors. Get the GM quality you know and trust with ACDelco GM Original Equipment Thermostats and Caps. Stay with the brand of parts your General Motors vehicle came with and get peace of mind that the fit, form, and function is up to the high standards and specifications of General Motors. ACDelco GM Original Equipment Thermostats and Caps are engineered for virtually every model of GM car, light duty truck, and sport utility vehicle.
Product Features:
See More
Product Features:
- Seal and maintain pressure on the cooling system for vehicle safety
- Raise the boiling point of the engine coolant to maintain efficiency
- Fit most models of GM vehicles for expanded coverage
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.54218)
from
$12.99
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.
Product Features:
See More
Product Features:
- Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
- Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
- Seamless fit – reverse-engineered from the original equipment to fit perfectly
- Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
Dorman – Dorman Expansion Tank Cap (Part No.G1040206055DOR)
from
$6.90
Dorman offers a variety of Engine Coolant Recovery Tank Caps for a range of applications. All Dorman Engine Coolant Recovery Tank Caps are constructed of high-quality plastic. They effectively protect the cooling system by providing a tight seal against the elements.
Product Features:
See More
Product Features:
- Save time, money and labor by replacing only the Cap – instead of the entire Engine Coolant Recovery Tank
- Direct replacement for a proper fit every time
- A necessary safety item – prevents coolant from splashing and/or leaking
- Available in diverse styles, including screw-on and snap-on
Dorman – Help – Engine Coolant Reservoir Cap: Flip Top, Plastic, 1 Pack (Part No.82724)
from
$13.99
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.
Product Features:
See More
Product Features:
- Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
- Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
- Seamless fit – reverse-engineered from the original equipment to fit perfectly
- Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
Popular 2022 GMC Canyon Engine Cooling Parts Categories
2022 GMC Canyon Engine Cooling Parts
Maybe you’re in the middle of a full rebuild of that 2022 GMC Canyon. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 7 different Engine Cooling Parts in our inventory ranging from $12.99 to $535.99. That means you can find the exact parts or products you need to keep that 2022 GMC Canyon running smoothly.
Engine Cooling Parts are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 2022 GMC Canyon. Dorman, Carquest Premium, and ACDelco are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Engine Cooling Parts for your 2022 GMC Canyon, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Engine Cooling Parts to keep your 2022 GMC Canyon rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Engine Cooling Parts Brands To Make Your 2022 GMC Canyon Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2022 GMC Canyon demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Canyon the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.
Popular Dorman – Help Engine Cooling Parts
We carry Dorman – Help parts in our stock across Coolant Reservoir Caps categories, plus more. For a 2022 GMC Canyon, our most popular Dorman – Help Engine Cooling Parts include:
FAQs for 2022 GMC Canyon Engine Cooling Parts
What are the most purchased Engine Cooling Parts for the 2022 GMC Canyon?
Out of 7 Engine Cooling Parts for the 2022 GMC Canyon, the most popular in our inventory are:
from
$16.99
This product is not rated
Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack
Coolant Reservoir Caps
from
$21.99
This product is not rated
Coolant Temperature Sensor with Washer
Coolant Temperature Sensors
from
$17.61
This product is not rated
GM Original Equipment Expansion Tank Cap
Coolant Reservoir Caps
