2022 Ford Transit-350 HD Engine Oils
Keeping your 2022 Ford Transit-350 HD running smoothly starts with maintaining the right engine oil, which is the lifeblood of your vehicle. Regularly checking and changing your oil not only helps optimize performance but also extends the life of your engine. Look out for signs like unusual noises, a drop in fuel efficiency, or an oil light flickering on your dashboard—they’re all red flags that your engine oil may need attention. Dirty or low oil can lead to serious damage, so don’t skip those routine checks! With the right oil and the right care, your Transit-350 HD will be ready to tackle any job, big or small.
Essential Engine Oil Maintenance for Your 2022 Ford Transit-350 HD
When it comes to keeping your 2022 Ford Transit-350 HD running smoothly, choosing the right engine oil is essential for performance and longevity. Upgrading or maintaining your engine oil can enhance your van’s engine efficiency, improve fuel economy, and reduce engine wear. At Advance Auto Parts, we understand that DIY enthusiasts need quality parts they can trust, which is why we offer a wide range of engine oils from top manufacturers. By selecting the right oil from our collection, you’re not only ensuring optimal engine health but also gaining peace of mind knowing you’re using products backed by industry-leading brands. So, whether you’re doing a routine maintenance check or looking to boost performance, our selection has got you covered!
Cost of Engine Oil for Your 2022 Ford Transit-350 HD
At Advance Auto Parts, we’ve got a stellar lineup of engine oils to keep your ride running smoothly, no matter your budget. Whether you’re just doing routine maintenance or gearing up for a DIY project, our engine oil prices range from a wallet-friendly $6.49 to premium options at $71.99, with an average cost of around $26.49. You can find trusted brands that deliver high performance and protection, so you can pick the right formulation that suits your vehicle’s needs without breaking the bank. So come on in, check out our selection, and give your engine the love it deserves!
Complete Your 2022 Ford Transit-350 HD Engine Oil Job with the Right Tools and Parts
When you’re diving into engine oil maintenance or replacement, there are a few related products and tools you might want to have on hand to make the job smoother. Beyond just the right oil and oil filter, consider grabbing an oil catch pan to prevent spills and a funnel for easy pouring; trust us, nobody likes cleaning oil off the floor! For added safety, a sturdy pair of gloves is essential to protect your hands from the messy and sometimes hazardous substances you’ll be working with. You might also want a torque wrench to ensure that your oil filter and drain plug are tightened to the manufacturer’s specifications—over-tightening can cause leaks or damage. Remember to work in a well-ventilated area and keep some rags handy to wipe up any unexpected drips. Happy wrenching!
Engine Oils for Your 2022 Ford Transit-350 HD
Mobil 1 – Extended Performance 5W-30 High Mileage Full Synthetic Motor Oil, 5 Quart (Part No.15021)
from
$41.99
You trust your car to keep you going, even after 75,000 miles. Mobil 1 Extended Performance High Mileage full-synthetic motor oil 5W-30 gives engines with over 75,000 miles the extra care they need to go the distance. Formulated to help prevent leaks, it helps to protect critical engine parts for up to 20,000 miles between oil changes, guaranteed.(1) Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of maximized engine power. This cutting-edge formula is recommended by ExxonMobil for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s No. 1 synthetic motor oil brand at retail,(2) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ((1)Protects for up to 20,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2)Source: The NPD Group/Retail Tracking Service/Dollar Sales/PCMO full-synthetic/52 weeks ending July 1, 2023)
Product Features:
See More
Product Features:
- Mobil 1 Extended Performance High Mileage full-synthetic motor oil 5W-30 is designed for engines with over 75,000 miles to go up to 20,000 miles between oil changes (1)
- Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of power
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
- Helps extend engine life by working to prevent damaging deposits and sludge buildup
- Manufacturer Part Number: 123843
- Versatile Compatibility: Recommended for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks.
- Trusted Brand: Mobil 1 is America’s No. 1 synthetic motor oil brand at retail, trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR«.
Castrol – Edge High Mileage 5W-30 Full Synthetic Motor Oil, Reduces Leaks & Deposits, 5 Quart (Part No.15906E)
from
$37.99
Castrol EDGE High Mileage 5W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.
Product Features:
See More
Product Features:
- Phosphorus Replacement Technology to help extend the life of the emission system
- Reduces leaks, oil burnoff and power robbing deposits
- 15,000 miles between oil changes (1)
- (1) Or one year, whichever comes first
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SN/SM
- ILSAC GF-6
- Meets Ford WSS-M2C947-B1
- Meets engine test requirements of Chrysler MS 6395
- Meets Ford WSS-M2C961-A1
Mobil 1 – Advanced 5W-30 Full Synthetic Motor Oil, Extends Engine Life, 1 Quart (Part No.24812)
from
$11.99
Mobil 1 advanced full synthetic motor oil 5W-30 helps to extend engine life for vehicles of all ages. Mobil 1 advanced synthetic motor oil is designed to deliver outstanding engine protection from the five factors that can damage engines over time and protect critical engine parts for up to 10,000 miles between oil changes (1) . Its uniform synthetic oil molecules reduce friction, helping to prevent deposits and sludge buildup. Mobil 1 helps to keep your engine running at lower temperatures. (2) This technologically advanced motor oil is proven to cool engine temperatures by over 10%. (3) Its formulation provides excellent internal engine heat protection (up to 500 degrees Fahrenheit), and low-temperature protection (to -30 degrees Fahrenheit), supporting quick cold-weather starting and ultra-fast protection. Mobil 1 advanced full synthetic motor oil meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy. Mobil 1 advanced full synthetic motor oil 5W-30 also helps control oxidation to prevent oil breakdown and is recommended by ExxonMobil for all types of modern vehicles, including high-performance turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s leading synthetic motor oil brand at retail, recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®. ((1) Protects for up to 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2) Compared to conventional oil. (3) Based on proprietary engine testing results may vary. (4) Source: The NPD Group/Retail Tracking Service/Dollar Sales/PCMO Full Synthetic/52 weeks ending February 25, 2023.)
Product Features:
See More
Product Features:
- Mobil 1 advanced full synthetic motor oil 5W-30 helps to protect your engine from the five factors that can damage engines over time.
- Helps protect critical engine parts for up to 10,000 miles between oil changes, (1) controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
- Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
- Manufacturer Part Number: 124315
- Versatile Application: Recommended by ExxonMobil for all types of modern vehicles, including high-performance turbo-charged and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks.
Castrol – GTX High Mileage 5W-30 Synthetic Blend Engine Oil, Protects Against Sludge, 5 Quart (Part No.15980E)
from
$30.99
Castrol® GTX® High Mileage 5W-30 Synthetic Blend Engine Oil is the ultimate choice for extending the life of high-mileage engines. Designed with advanced Phosphorus Replacement Technology, it safeguards emission systems by reducing catalytic converter damage while delivering superior dispersancy to combat sludge buildup. This premium synthetic blend offers exceptional protection against oil burn-off, surpassing industry standards, and features seal conditioners to help minimize leaks. Engineered with advanced additives, it reduces engine wear and improves fuel economy in 5W-20, 5W-30, and 10W-30 grades. Meeting or exceeding API SP/SN PLUS/SN/SM and ILSAC GF-6 specifications, as well as Ford WSS-M2C946-B1 and WSS-M2C961-A1 standards, this oil ensures reliable performance and compatibility with a wide range of vehicles. Perfect for drivers seeking durability and efficiency, this 5-quart solution is tailored to keep engines running smoothly while protecting against wear and sludge for long-lasting value.
Product Features:
See More
Product Features:
- Phosphorus Replacement Technology helps extend emission system life
- Superior dispersancy that fights sludge build up
- Exceptional oil burn-off protection exceeding industry standards (1)
- Seal conditioners to help reduce leaks
- Advanced additives that minimize engine wear
- Improved fuel economy (2)
- (1) Based on API and ACEA volatility specifications
- Meets or exceeds the following specifications:
- (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
- API SP/SN PLUS/SN/SM
- ILSAC GF-6
- Meets Ford WSS-M2C946-B1
- Meets Ford WSS-M2C961-A1
Castrol – Edge 5W-30 Full Synthetic Motor Oil, Superior Wear Protection, 5 Quart (Part No.1598B1)
from
$37.99
Castrol EDGE 5W-30 Full Synthetic Motor Oil is engineered for drivers seeking peak engine performance and unmatched protection. With a formula that is 3X stronger against viscosity breakdown and delivers 10X better high-stress performance, this oil ensures your engine operates smoothly under demanding conditions. Designed for extended use, it offers up to 20,000 miles or one year between oil changes, making it a cost-effective choice for long-term reliability. Its advanced composition exceeds API SQ/SP/SN PLUS/SN standards and meets stringent requirements from Chrysler and Ford, ensuring compatibility with a wide range of vehicles. The 5W-30 weight provides optimal viscosity control and thermal stability, enhancing fuel economy and safeguarding against sludge buildup. Whether you’re navigating high temperatures or heavy loads, this full synthetic oil delivers superior wear protection and performance in critical areas, making it the ultimate solution for maintaining your engine’s health and efficiency.
Product Features:
See More
Product Features:
- 3X Stronger than the leading full synthetic (1)
- 10X Better high stress performance (2)
- 20,000 miles between oil changes (3)
- (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
- (2) As measured in Seq IX test under high load/torque conditions vs. API SQ test limits
- (3) Or one year, whichever comes first
- Approved and Licensed Specifications:
- Exceeds API SQ/SP/SN PLUS/SN
- ILSAC GF-7
- Meets engine test requirements of Chrysler MS 6395
- Meets Ford WSS-M2C945-B1
- Meets Ford WSS-M2C960-A1
- Meets Ford WSS-M2C961-A1
Castrol – Edge 5W-30 Full Synthetic Motor Oil, 20,000 Mile Protection, 1 Quart (Part No.152C3C)
from
$11.99
Castrol EDGE 5W-30 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrol’s strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.
Product Features:
See More
Product Features:
- 3X Stronger than the leading full synthetic (1)
- 10X Better high stress performance (2)
- 20,000 miles between oil changes (3)
- (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
- (2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
- (3) Or one year, whichever comes first
- Approved and Licensed Specifications:
- ILSAC GF-6
- Exceeds API SP/SN PLUS/SN/SM
- GM dexos1 Gen 3
- Meets engine test requirements of Chrysler MS 6395
- Meets Ford WSS-M2C946-B1
- Meets Ford WSS-M2C961-A1
Castrol – Edge High Mileage 5W-30 Full Synthetic Motor Oil, Reduces Leaks & Deposits, 1 Quart (Part No.15979F)
from
$11.99
Castrol EDGE High Mileage 5W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.
Product Features:
See More
Product Features:
- Phosphorus Replacement Technology to help extend the life of the emission system
- Reduces leaks, oil burnoff and power robbing deposits
- 15,000 miles between oil changes (1)
- (1) Or one year, whichever comes first
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SN/SM
- ILSAC GF-6
- Meets engine test requirements of Chrysler MS 6395
- Meets Ford WSS-M2C946-B1
- Meets Ford WSS-M2C961-A1
Valvoline – Full Synthetic High Mileage 5W-30 Engine Oil, Extends Engine Life, 1 Quart (Part No.VV179)
from
$11.49
Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.
Product Features:
See More
Product Features:
- Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
- Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
- 25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
- Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
- Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
- Extends engine life: MaxLife High Mileage Full Synthetic Oil is designed to extend the life of higher mileage vehicles, providing superior protection against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs
Castrol – GTX High Mileage 5W-30 Synthetic Blend Motor Oil, Protects Against Sludge & Wear, 1 Quart (Part No.149D6A)
from
$9.49
Castrol® GTX® High Mileage 5W-30 Synthetic Blend Motor Oil is the ultimate choice for extending the life of high-mileage engines. Designed with advanced Phosphorus Replacement Technology, it safeguards emission systems by reducing catalytic converter damage while delivering exceptional protection against sludge, wear, and oil burn-off. This synthetic blend exceeds industry standards for volatility and dispersancy, ensuring your engine stays cleaner and performs better over time. With seal conditioners to minimize leaks and advanced additives to reduce engine wear, it’s engineered to keep your vehicle running smoothly. Compatible with API SP/SN PLUS/SN/SM and ILSAC GF-6 specifications, it meets Ford WSS-M2C946-B1 and WSS-M2C961-A1 standards, making it a reliable choice for a wide range of vehicles. Additionally, its improved fuel economy in 5W-30 grade adds value by optimizing performance and efficiency. Perfect for drivers seeking durability and superior engine protection in a convenient 1-quart size.
Product Features:
See More
Product Features:
- Phosphorus Replacement Technology helps extend emission system life
- Superior dispersancy that fights sludge build up
- Exceptional oil burn-off protection exceeding industry standards (1)
- Seal conditioners to help reduce leaks
- Advanced additives that minimize engine wear
- Improved fuel economy (2)
- (1) Based on API and ACEA volatility specifications
- (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SN/SM
- ILSAC GF-6
- Meets Ford WSS-M2C946-B1
- Meets Ford WSS-M2C961-A1
Valvoline – Advanced Full Synthetic 5W-30 Engine Oil, Maximizes Engine Life, 1 Quart (Part No.VV955)
from
$11.49
Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.
Product Features:
See More
Product Features:
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- 40% better wear protection vs. industry standard as tested in the sequence ivb engine test
- 25% better deposit protection with superior engine cleaning detergents as tested in the gmod engine test
- Exceptional high/low temperature protection defends your motor no matter the weather conditions
- Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn, gm dexos 1 gen 3
- Superior engine protection: Valvoline SynPower Full Synthetic Engine Oil provides superior protection against engine sludge and varnish, ensuring your engine stays clean and running smoothly.
FRAM – 5W-30 Full Synthetic Motor Oil, Faster Oil Flow at Start-Up, 5 Quart (Part No.F930-5QT)
from
$27.99
FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 & is a fully licensed GM dexos1 Gen 3 motor oil.
Product Features:
See More
Product Features:
- Faster oil flow at start-up.
- Fuel efficiency gains over heavier grade oils
- Excellent sludge and varnish protection
- Outstanding thermal and oxidation stability
- Lowers oil vaporization and consumption at extreme conditions
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-30 meets stringent API: SP, SN, SM, SL, SJ, GM Dexos1 Gen 3, and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
- Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, reducing the risk of premature engine failure.
- Enhanced Wear Protection: Provides increased wear protection, oxidation, and shear stability over previous oil categories, extending the life of your engine.
- Versatile Compatibility: Suitable for use in carbureted, normally fuel-injected engines, and the rigorous environment of GDI and TGDI engines, offering broad application versatility.
- Fully Licensed GM dexos1 Gen 3: This oil is a fully licensed GM dexos1 Gen 3 motor oil, ensuring it meets the high standards set by General Motors for optimal engine performance.
FRAM – 5W-20 Full Synthetic Motor Oil, Faster Oil Flow at Start-Up, 5 Quart (Part No.F920-5QT)
from
$27.99
FRAM Engine Oil Full Synthetic SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation & shear stability over previous oil categories.
Product Features:
See More
Product Features:
- Faster oil flow at start-up.
- Fuel efficiency gains over heavier grade oils
- Excellent sludge and varnish protection
- Outstanding thermal and oxidation stability
- Lowers oil vaporization and consumption at extreme conditions
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-20 meets stringent API: SP, SN, SM, SL, SJ and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
- Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for GDI and TGDI engines, thereby reducing the risk of pre-mature engine failure.
- Versatile Compatibility: Suitable for gas-direct engine (GDI), turbo gas-direct engine (TGDI), carbureted, and normally fuel-injected engines, making it a versatile choice for various engine types.
FRAM – 5W-30 Conventional Motor Oil, Low-Speed Pre-Ignition Control, 5 Quart (Part No.F620-5QT)
from
$24.99
FRAM Engine Oil SAE 5W-30 utilizes a blend of high quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.
Product Features:
See More
Product Features:
- Low-speed pre-ignition control.
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Reliable engine protection: FRAM Conventional Oil 5W30 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
FRAM – High Mileage 5W-30 Full Synthetic Motor Oil, Reduces Oil Consumption, 5 Quart (Part No.F933-5QT)
from
$27.99
FRAM Full Synthetic High Mileage SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.
Product Features:
See More
Product Features:
- Faster oil flow at start-up
- Fuel efficiency gains over heavier grade oils
- Reduces oil cumsumption
- Excellent sludge and varnish protection
- Slows engine leaks
- Outstanding thermal and oxidation stability
- Lowers oil vaporization and consumption at extreme conditions
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
FRAM – High Mileage 5W-30 Conventional Motor Oil, Restores Seals, 5 Quart (Part No.F660-5QT)
from
$24.99
FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 5W30 grades will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.
Product Features:
See More
Product Features:
- Formulated with a unique combination of premium base oils and an enhanced additive system
- Provides increased protection in higher mileage engines
- Helps restore seal condition to reduce oil consumption
- Increases protection against high temperature deposits and ring sticking
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.
FRAM – High Mileage 5W-20 Conventional Motor Oil, Helps Reduce Leaks, 5 Quart (Part No.F662-5QT)
from
$24.99
FRAM Conventional High Mileage 5W-20 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 5W20 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 5W20 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.
Product Features:
See More
Product Features:
- Formulated with a unique combination of premium base oils and an enhanced additive system.
- Provides increased protection in higher mileage engines
- Helps restore seal condition to reduce oil consumption
- Increases protection against high temperature deposits and ring sticking
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Sludge Cleanup and Engine Efficiency: Formulated to help clean out sludge buildup, keeping engines running clean with increased efficiency and power.
- Versatile Compatibility: Protects domestic and imported vehicles and equipment powered by gasoline or light-duty diesel engines, including turbocharged and supercharged engines.
- Meets Stringent Standards: Meets or exceeds all new car manufacturers’ warranty requirements and stringent industry standards API SP/CF, and ILSAC GF-6A Resource Conserving Service Category.
FRAM – 5W-30 Full Synthetic Motor Oil, Faster Oil Flow at Start-Up, 1 Quart (Part No.F930)
from
$7.49
FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 and is a fully licensed GM dexos1 Gen 3 motor oil.
Product Features:
See More
Product Features:
- Faster oil flow at start-up
- Fuel efficiency gains over heavier grade oils
- Excellent sludge and varnish protection
- Outstanding thermal and oxidation stability
- Lowers oil vaporization and consumption at extreme conditions
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-30 meets stringent API: SP, SN, SM, SL, SJ, GM Dexos1 Gen 3, and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
- Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, reducing the risk of premature engine failure.
- Enhanced Wear Protection: Provides increased wear protection, oxidation, and shear stability over previous oil categories, extending the life of your engine.
- Versatile Compatibility: Suitable for use in carbureted, normally fuel-injected engines, and the rigorous environment of GDI and TGDI engines, offering broad application versatility.
- Fully Licensed GM dexos1 Gen 3: This oil is a fully licensed GM dexos1 Gen 3 motor oil, ensuring it meets the high standards set by General Motors for optimal engine performance.
FRAM – 5W-30 Conventional Motor Oil, Low-Speed Pre-Ignition Control, 1 Quart (Part No.F620)
from
$6.49
FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.
Product Features:
See More
Product Features:
- Low-speed pre-ignition control
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Reliable engine protection: FRAM Conventional Oil 5W30 1 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
FRAM – High Mileage 5W-20 Full Synthetic Motor Oil, Reduces Oil Consumption, 5 Quart (Part No.F923-5QT)
from
$27.99
FRAM Full Synthetic High Mileage SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-20 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-20 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.
Product Features:
See More
Product Features:
- Faster oil flow at start-up
- Fuel efficiency gains over heavier grade oils
- Reduces oil cumsumption
- Excellent sludge and varnish protection
- Slows engine leaks
- Outstanding thermal and oxidation stability
- Lowers oil vaporization and consumption at extreme conditions
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Ultimate Protection for High Mileage Engines: Designed for engines with over 75,000 miles, this oil provides the ultimate protection, making it ideal for higher mileage vehicles.
- Advanced LSPI Prevention Technology: Contains additive technology to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines, helping to prevent premature engine fai
Motorcraft – 5W-30 Synthetic Blend Motor Oil, Superior Wear Protection, 5 Quart (Part No.XO-5W30-5Q3SP)
from
$35.99
Original Equipment for Ford Motor Company Vehicles. Motorcraft SAE 5W-30 Synthetic Blend Motor Oil is a premium-quality passenger car motor oil recommended by Ford Motor Company and meets all warranty requirements. Manufactured with high-viscosity index, premium-quality, synthetic/hydro processed base oils and specially designed performance additives, this oil provides improved protection against engine wear, deposits, oil thickening, and low-speed pre-ignition. It also prevents turbocharger deposits, low-temperature gelling, rust, corrosion, and foaming. The friction-reducing technology offers superior wear protection and energy-conserving characteristics, resulting in better fuel economy compared to SAE 10W-30 motor oils. Additionally, this oil meets WSS-M2C961-A1 standards and is API Certified for gasoline engine service ILSAC GF-6, meeting API SP/Resource Conserving and SN PLUS specifications.
Product Features:
See More
Product Features:
- Motorcraft SAE 5W-30 Synthetic Blend Motor Oil is manufactured with high-viscosity index, premium-quality, synthetic/hydro processed base oils and specially designed performance additives,
- MotorcraftáSAE 5W-30 Synthetic Blend Motor Oil is manufactured with high-viscosity index, premium-quality, synthetic/hydro processed base oils and specially designed performance additives,
- Additives provides improved protection against engine wear, and deposits, oil thickening and oil derived low speed pre-ignition, while continuing to prevent turbocharger deposits, low-temperature gelling, rust, corrosion and foaming
- The friction-reducing technology in this motor oil provides superior wear protection and energy-conserving characteristics, which result in improvement in fuel economy when compared to SAE 10W-30 motor oils.
- This oil also meets WSS-M2C961-A1
- Original Equipment for Ford Vehicles: Specifically recommended by Ford Motor Company, ensuring compatibility and optimal performance for Ford vehicles.
FRAM – 5W-20 Conventional Motor Oil, Low-Speed Pre-Ignition Control, 5 Quart (Part No.F610-5QT)
from
$24.99
FRAM Engine Oil SAE 5W-20 utilizes a blend of high quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-20 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.
Product Features:
See More
Product Features:
- Low-speed pre-ignition control.
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Reliable engine protection: FRAM Conventional Oil 5W20 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
FRAM – 5W-20 Full Synthetic Motor Oil, Faster Oil Flow at Start-Up, 1 Quart (Part No.F920)
from
$7.49
FRAM Engine Oil Full Synthetic SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) & turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories.
Product Features:
See More
Product Features:
- Faster oil flow at start-up!
- Fuel efficiency gains over heavier grade oils
- Excellent sludge and varnish protection
- Outstanding thermal and oxidation stability
- Lowers oil vaporization and consumption at extreme conditions
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-20 meets stringent API: SP, SN, SM, SL, SJ and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
- Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for GDI and TGDI engines, thereby reducing the risk of pre-mature engine failure.
- Versatile Compatibility: Suitable for gas-direct engine (GDI), turbo gas-direct engine (TGDI), carbureted, and normally fuel-injected engines, making it a versatile choice for various engine types.
FRAM – 5W-20 Conventional Motor Oil, Low-Speed Pre-Ignition Control, 1 Quart (Part No.F610)
from
$6.49
FRAM Engine Oil SAE 5W-20 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-20 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.
Product Features:
See More
Product Features:
- Low-speed pre-ignition control
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Reliable engine protection: FRAM Conventional Oil 5W20 1 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
FRAM – High Mileage 5W-20 Conventional Motor Oil, Helps Restore Seal Condition, 1 Quart (Part No.F662)
from
$6.49
FRAM Conventional High Mileage 5W20 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 5W20 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 5W20 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.
Product Features:
See More
Product Features:
- Formulated with a unique combination of premium base oils and an enhanced additive system
- Provides increased protection in higher mileage engines
- Helps restore seal condition to reduce oil consumption
- Increases protection against high temperature deposits and ring sticking
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Specially formulated for high mileage engines: FRAM High Mileage 5W20 1 QT is designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines, making it an ideal choice for vehicles with over 75,000 miles.
Motorcraft – Synthetic Blend 5W-30 Engine Oil, Improves Fuel Economy, 1 Quart (Part No.XO-5W30-Q1SP)
from
$8.49
MOTORCRAFT Synthetic Blend 5W30 Motor Oil is a premium-quality engine oil that is recommended by Ford Motor Company and meets all warranty requirements. This oil is API Certified for gasoline engine service ILSAC GF-6 and meets API SP/Resource Conserving and SN PLUS. It is a synthetic blend oil that provides improved protection against engine wear, deposits, and oil breakdown. The friction-reducing technology in this motor oil helps to improve fuel economy and reduce engine wear. This oil also meets WSS-M2C961-A1. It is the original equipment for Ford Motor Company vehicles and is a standard oil class with a SAE oil weight of 5W-30. If you own a Ford vehicle, this is the perfect engine oil to keep your engine running smoothly and efficiently.
Product Features:
See More
Product Features:
- Motorcraft sae 5w-30 synthetic blend engine oil is manufactured with high-viscosity index, premium-quality, synthetic/hydroprocessed base oils and specially designed performance additives,
- Additives provides improved protection against engine wear, and deposits, oil thickening and oil derived low speed pre-ignition, while continuing to prevent turbocharger deposits, low-temperature gelling, rust, corrosion and foaming
- The friction-reducing technology in this engine oil provides superior wear protection and energy-conserving characteristics, which result in improvement in fuel economy when compared to sae 10w-30 engine oils.
- This oil also meets wss-m2c961-a1
- Premium Quality: Motorcraft SAE 5W-30 Synthetic Blend Engine Oil is a premium-quality passenger car engine oil that meets all warranty requirements recommended by Ford Motor Company.
- API Certified: This engine oil is API Certified for gasoline engine service ILSAC GF-6 and meets API SP/Resource Conserving and SN PLUS, ensuring that it meets the highest industry standards.
FRAM – High Mileage 5W-30 Conventional Motor Oil, Helps Restore Seal Condition, 1 Quart (Part No.F660)
from
$6.49
FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 5W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.
Product Features:
See More
Product Features:
- Formulated with a unique combination of premium base oils and an enhanced additive system
- Provides increased protection in higher mileage engines
- Helps restore seal condition to reduce oil consumption
- Increases protection against high temperature deposits and ring sticking
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.
FRAM – Full Synthetic High Mileage 5W-30 Motor Oil, Reduces Oil Consumption, 1 Quart (Part No.F933)
from
$7.49
FRAM Full Synthetic High Mileage SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.
Product Features:
See More
Product Features:
- Faster oil flow at start-up
- Fuel efficiency gains over heavier grade oils
- Reduces oil cumsumption
- Excellent sludge and varnish protection
- Slows engine leaks
- Outstanding thermal and oxidation stability
- Lowers oil vaporization and consumption at extreme conditions
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Engine Cleaning and Efficiency: Helps clean out sludge buildup, keeping engines running clean with increased efficiency and power, ideal for engines with over 75,000 miles.
- Advanced LSPI Prevention: Contains additive technology designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines.
- Comprehensive Engine Protection: Provides increased wear protection, oxidation, and shear stability for higher mileage vehicles, meeting stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications.
FRAM – High Mileage 5W-20 Full Synthetic Motor Oil, Reduces Oil Consumption, 1 Quart (Part No.F923)
from
$7.49
FRAM Full Synthetic High Mileage SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-20 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-20 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.
Product Features:
See More
Product Features:
- Faster oil flow at start-up
- Fuel efficiency gains over heavier grade oils
- Reduces oil cumsumption
- Excellent sludge and varnish protection
- Slows engine leaks
- Outstanding thermal and oxidation stability
- Lowers oil vaporization and consumption at extreme conditions
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Protection for Advanced Engine Designs: Specifically designed for gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, providing increased protection and preventing low-speed pre-ignition (LSPI) which can lead to premature engine failure.
- Increased Wear Protection and Stability: Provides increased wear protection, oxidation, and shear stability for higher mileage vehicles, ensuring long-lasting engine performance and reliability.
FAQs for 2022 Ford Transit-350 HD Engine Oils
Which Engine Oils are the top sellers for the 2022 Ford Transit-350 HD?
Out of 28 Engine Oils that fit 2022 Ford Transit-350 HDs, the following parts are the top sellers:
from
$41.99
(106)
Extended Performance 5W-30 High Mileage Full Synthetic Motor Oil, 5 Quart
Engine Oil
from
$37.99
(111)
Edge High Mileage 5W-30 Full Synthetic Motor Oil, Reduces Leaks & Deposits, 5 Quart
Engine Oil
How can I make sure that a part will be compatible with my 2022 Ford Transit-350 HD?
Our Ford Transit-350 HD aftermarket and OEM parts are designed specifically for the 2022 model. You can always find your specific fitment and compatibility for your 2022 Ford on an individual product page.
What is the price range for 2022 Ford Transit-350 HD Engine Oils?
The range of prices of Engine Oils for the 2022 Ford Transit-350 HD goes from $6.49 up to $41.99 for the most premium parts.
What is the average price of 2022 Ford Transit-350 HD Engine Oils?
2022 Ford Transit-350 HD Engine Oils average $19.15 for our selection of OEM and aftermarket parts.
Does Advance Auto Parts sell Engine Oils for other Ford Transit-350 HD model years?
Which Engine Oils are highest rated for the 2022 Ford Transit-350 HD?
Based on 25,170 customer reviews, our 2022 Ford Transit-350 HD Engine Oils have an average rating of 5. Explore our top-rated Engine Oils here:
from
$11.49
(690)
Advanced Full Synthetic 5W-30 Engine Oil, Maximizes Engine Life, 1 Quart
“My engine loves it”
from
$11.49
(367)
Full Synthetic High Mileage 5W-30 Engine Oil, Extends Engine Life, 1 Quart
“Good Oil”
Can I get help with 2022 Ford Transit-350 HD Engine Oils orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Engine Oils and more.
What is your return policy for Ford Transit-350 HD Engine Oils?
Advance Auto Parts keeps returns simple. For new Ford Transit-350 HD Engine Oils and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
Engine Oils For Other Ford Transit-350 HD Model Years
Looking for parts for a different model year of the Ford Transit-350 HD? Below, you’ll find links to Engine Oils for a range of model years, from 2015 models all the way up to 2025. At Advance Auto Parts, we carry high-quality OEM and aftermarket auto parts for popular years like 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2023, 2024, and more, ensuring you have access to the best options for your specific needs. Choosing an Engine Oil from Advance Auto Parts means investing in top-tier parts that will keep your Ford Transit-350 HD running at its best, no matter the year.
