2022 Ford Mustang Drivetrains

Below you will find various in-demand Ford Drivetrains, components and accessories for your 2022 Mustang. Advance Auto Parts has popular Mustang parts like Differentials, Drive Shafts and Axles, Universal Joints and more. You’ll also find aftermarket and OEM Drivetrains for other Mustang model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2023 and more. Select a category of 2022 Ford Mustang Drivetrains below and start saving instantly.

Popular 2022 Ford Mustang Drivetrains Categories

Differential Oil

Axle Shaft Universal Joints

U-Joints

Drive Shaft and Axles

Drive and Prop Shaft Assemblies

Differential Rebuild Kits

Differential Pinion Seals

Differential Ring and Pinions

Differential Pinion Shims

Differential Pinion Shaft Nuts

Essential Drivetrains for 2022 Ford Mustangs

from

$15.99

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$6.49

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$40.99

You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.

from

$22.49

Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$14.49

Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

Product Features:

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$18.99

We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.

Product Features:

FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations.
EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360

from

$69.99

Valvoline SAE 75W-140 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our formulation provides exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity and wear resistance, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. It’s recommended for conventional rear axles and transmissions requiring EP gear lubes under high speed, high load, high torque and high horsepower conditions.

Product Features:

EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -22F to 390F degrees
REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4
MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Ford M2C-192A, GM 12346140, Chrysler MS-8985 and API GL-5

from

$27.99

8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

Product Features:

Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″

from

$21.49

Product Features:

PINION SHIMS 8″ FORD

from

$76.99

Product Features:

Pinion depth shim kit
Fits Ford 9″ with 7/16″ pinion support bolts

from

$44.99

When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.

Product Features:

OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
Zerk allows for lubricating at regular intervals to help extend the life of the part.

from

$38.99

from

$31.99

OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
Zerk allows for lubricating at regular intervals to help extend the life of the part.

from

$448.99

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$780.99

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$915.99

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$577.99

RngPnn

from

$577.99

RngPnn

from

$635.99

RngPnn

from

$26.99

9″ Ford pinion nut, 35 spline Large pinion oversize.

Product Features:

Pinion nut
Fits Ford 9″ with 35 spline pinion

from

$7.99

Pinion nut for Ford 7.5″, 8″, 8.8″, 9 3/8″ & 9″. 1 1/6″ socket, 3/4″ x 20 thread.

Product Features:

Pinion nut for Ford 7.5″, 8″ and 9″
3/4″ x 20 thread
1 1/6″ socket

from

$44.99

Differential Pinion

from

$124.99

9″ Ford pinion kit, Koyo bearings.

Product Features:

Fits Ford 9″
Uses Koyo bearings and races
Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.

from

$213.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:

Fits Ford 9″ with LM501310 carrier race
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pilot bearing, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.

from

$249.99

Fits Ford 8″ with aftermarket positraction
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.

from

$179.99

C/V Axle

from

$176.99

C/V Axle

from

$207.99

Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

Upgrade your 2022 Ford Mustang with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 2022 Ford Mustang, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Drivetrains are key to keeping your Mustang functioning at its best. At Advance Auto Parts, we offer a wide selection of 22 Drivetrains for the 2022 Ford Mustang, designed to meet your needs without breaking the bank. From Differential replacements to Drive Shafts and Axles upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2022 Ford Mustang at great prices. Our Drivetrains inventory for this model ranges from just $10.29 to $740.99, with an average price of $173.98. Our 22 Drivetrains in stock come from 9 trusted brands, so you’re sure to find the right part for your 2022 Ford Mustang without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2022 Ford Mustang, we stock popular OEM and aftermarket Drivetrains from top names like Royal Purple, Spicer, Moog, and more. Royal Purple Drivetrains start at just $19.49 and boast an impressive 4.8 stars average rating from customers. Spicer and Moog also bring quality to the table, with Drivetrains available starting at $37.99, and at an average 4.6 stars rating. With 1,911 customer reviews and counting, our 2022 Ford Mustang Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2022 Ford Mustang is always ready to roll. We’re committed to providing you with everything you need to keep your Mustang in top shape, all in one place. Start shopping confidently below for your 2022 Ford Mustang!

Best-Selling Differentials for 2022 Ford Mustangs

Enhance the driving experience in your Ford with 13 quality Differential components, starting at $10.29.

show more show less

from

$41.99

Royal Purple Motor Oil is a specially formulated multi viscocity oil for use in gasoline and diesel engines of all types from cars and trucks to SUVs, motorcycles and boats. Royal Purple(R) Motor Oil with Synerlec(R) additive technology reduces friction, which results in a 1-3 percent increase in horsepower, lowers operating temperatures, provides superior corrosion protection, improves fuel economy, reduces emissions and extends oil life. A.P.I. Certified.

Product Features:

Better wear protection
Increased fuel efficiency
Better protection of the expensive catalytic emission system
Improved compatibility with fuels containing ethanol
Superior corrosion protection
Meets ILSAC GF-5 and Dexos1 performance requirements

from

$14.49

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$19.49

Max ATF is a synthetic, high-performance, automatic transmission fluid. Its low co-efficient of friction and high film strength help to dramatically reduce heat and wear. Additionally, Max ATF is more oxidation stable than other transmission fluids for longer fluid life. Max ATF significantly reduces heat to extend the life of your transmission.

Product Features:

High performance automatic transmission fluid
High film strength helps to dramatically reduce heat and wear
Fully compatible and can be mixed with other automatic transmission fluids
Extends the life of your transmission

from

$18.99

FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations.
EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360

from

$10.29

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

from

$17.99

All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!

from

$18.49

Valvoline ULV is a full synthetic, ultra low viscosity transmission fluid specifically engineered for high speed automatic transmissions. Formulated to meet the performance requirements of the latest 9 & 10 speed transmission designs, including the Ford/GM 10R80 found in select Ford F-150 and Raptor trucks.

Product Features:

Formulated with premium synthetic base oils to achieve low viscosity and minimize deposits
Provides excellent thermal and oxidation performance
Durable friction modifiers help prevent shudder
Advanced anti-wear technology to better prevent gear wear

from

$535.99

Ring and Pinion Kit

from

$514.99

Ring and Pinion Kit

from

$459.99

Differential Parts K

from

$419.99

RngPnnKt

Master Overhaul Kit for 2015 & Up Mustang and F-150

from

$405.99

Master Overhaul Rebuild Kit
For 2015 & Up Mustang & F150
USA Standard offers the Most Comprehensive and Complete Master Rebuild Kit on the Market

from

$44.99

Differential Pinion

Top Picks for 2022 Ford Mustang Universal Joints

Upgrade Ford Mustangs with top-quality Universal Joints parts, including 3 OEM and aftermarket selections for your 2022 model.

show more show less

from

$37.99

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
GREASABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$37.99

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$41.99

Product Features:

BUILT TO LAST – Rugged design specifically engineered for fleets, off-highway and commercial vehicles
STRONG AND DURABLE – Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
GREASEABLE DESIGN – Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
INHIBITS PREMATURE WEAR – Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
RELIABLE PERFORMANCE – Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

Top-Rated Drivetrains Brands For Your 2022 Ford Mustang

Shop for the best-rated brands offering Drivetrains and other products for your 2022 Ford Mustangs. Below you’ll find some of our best rated Drivetrains from Royal Purple, Spicer, and Moog, and more. Drivetrains from these brands that fit a 2022 Mustang start at just $19.49 and are rated as high as 4.8 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Royal Purple 2022 Ford Mustang Drivetrains

When it comes to maintaining or upgrading your 2022 Ford Mustang, using quality Drivetrains is essential to ensure durability and a perfect fit. Royal Purple ticks all of those boxes. We offer a wide selection of Royal Purple Drivetrains, specifically designed for the 2022 Ford Mustang. With over 2 Royal Purple brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $19.49, with an average price of just $30.74. Plus, with over 163 customer reviews and an average rating of 4.8 stars, you can trust that our Royal Purple Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $19.49

(30)

Max Automatic Transmission Fluid (1 Quart)

“I believe it improves car performance and maintains all running parts much better then the regular transmission fluids out there. Love this product an”

from $41.99

(133)

High Performance 5W-30 Synthetic Engine Oil, Better Wear Protection, 5 Quart

“The best”

Popular Spicer 2022 Ford Mustang Drivetrains

Spicer auto parts is one of the highest quality Drivetrain brands in the market. Any 2022 Ford Mustang owner should feel confident when installing genuine Spicer parts in their vehicle. To ensure the best fit and performance for your 2022 Mustang, Advance Auto Parts carries a full inventory of 2 Spicer Drivetrains. Plus you will be keeping your Ford in peak condition while saving money because prices on these Spicer Drivetrains range from $44.99 to $45.99, plus, with more than 12 customer reviews and an impressive 4.6 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

from $44.99

(5)

Universal Joint, Greaseable 1350 Series

“Excellent Dana u joint.”

from $45.99

(7)

Universal Joint

“Perfect fit, well built, much better than the run of the mill u-joints, and they come with different thickness clips so you can take up slack if neede”

FAQs for 2022 Ford Mustang Drivetrains

Which Drivetrains are best-sellers for 2022 Ford Mustangs?

Out of 22 Drivetrains that fit 2022 Ford Mustangs, the following parts are the top sellers:

DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (12079201) – $14.49
Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (12507273) – $18.99
Greaseable Super Strength Universal Joint (10086947) – $37.99

What’s the price range for 2022 Ford Mustang Drivetrains?

Drivetrain prices for the 2022 Ford Mustang start at $10.29 and go up to $740.99 for the most premium parts.

What’s the average price of a Drivetrain for a 2022 Ford Mustang?

The average price for Drivetrains for the 2022 Ford Mustang is $173.98. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other Ford Mustang model years?

Yes, we currently carry Drivetrains for 55 model years of Ford Mustangs between 1964 and 2025. Drivetrains are bought most frequently for the following model years: 2023, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Drivetrains for my 2022 Ford Mustang?

The cheapest 2022 Ford Mustang Drivetrains we carry in stock are:

Differential Pinion Seal (10751050) – $10.29
DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (12079201) – $14.49
Differential Pinion Shim Kit (10954538) – $17.99
ULV ATF Full Synthetic Ultra Low Viscosity Automatic Transmission Fluid, 1 Quart (12181693) – $18.49
Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (12507273) – $18.99

What are the top-rated Drivetrains that fit the 2022 Ford Mustang?

Out of 1,911 reviews by customers, our 2022 Ford Mustang Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 2022 Ford Mustang and their top-rated products:

Universal Joints
- Greaseable Super Strength Universal Joint (10086947) – $37.99
- Non-Greaseable Super Strength Universal Joint (10086964) – $37.99
- Greaseable Premium Universal Joint (10086742) – $41.99
Differentials
- Greaseable Super Strength Universal Joint (10086947) – $37.99
- Non-Greaseable Super Strength Universal Joint (10086964) – $37.99
- Greaseable Premium Universal Joint (10086742) – $41.99
Drive Shafts and Axles
- Greaseable Super Strength Universal Joint (10086947) – $37.99
- Non-Greaseable Super Strength Universal Joint (10086964) – $37.99
- Greaseable Premium Universal Joint (10086742) – $41.99

What types of Drivetrains do you sell for my 2022 Ford Mustang?

As of 11/2/25, these are some of the most in-demand types of Drivetrains for a 2022 Ford Mustang:

Can I get help with 2022 Ford Mustang Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Drivetrains and more.

What is your return policy for Ford Mustang Drivetrains?

Advance Auto Parts keeps returns simple. For new Ford Mustang Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2022 Ford Mustang Drivetrains

FAG US – Shaft Seal (Part No.SS2865)

Driveworks – Oil Seal (Part No.S-7044NA)

Spicer – Universal Joint (Part No.5-1330X)

MOOG Driveline Products – Universal Joint (Part No.444)

Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (Part No.889785)

Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Gallon (Part No.887344)

Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

Motive Gear – Differential Pinion Shim Kit (Part No.2102)

Yukon Gear – Pinion Depth Shims For Ford 9" With 7/16" Studs (Part No.55057)

Spicer – Universal Joint, Greaseable 1350 Series (Part No.5-178X)

Spicer – Universal Joint (Part No.5-1310X)

Spicer – Universal Joint, Greaseable 1310 Series OSR (Part No.5-153X)

Dorman – Drive Shaft (Part No.986-522)

Dorman – Drive Shaft (Part No.976-060)

Dorman – Drive Shaft (Part No.936-566)

Richmond Gear – RngPnn (Part No.79-0004-1)

Richmond Gear – RngPnn (Part No.79-0003-1)

Richmond Gear – RngPnn (Part No.79-0080-1)

Yukon Gear – 9" Ford Pinion Nut, 35 Spline Large Pinion Oversize (Part No.33161)

Yukon Gear – Pinion Nut (Part No.33154)

Yukon Gear – Differential Pinion (Part No.33577)

USA Standard Gear – 9" Ford Pinion Kit, Koyo Bearings (Part No.60002)

USA Standard Gear – Master Overhaul Kit for the Ford 9" LM501310 Differential (Part No.37035)

USA Standard Gear – Master Overhaul Kit for the Ford 8" Differential w/ HD Posi (Part No.37029)

Carquest Premium – C/V Axle (Part No.NCV717161)

Carquest Premium – C/V Axle (Part No.NCV717151)

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV11193)

Royal Purple – High Performance 5W-30 Synthetic Engine Oil, Better Wear Protection, 5 Quart (Part No.51530)

Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

Royal Purple – Max Automatic Transmission Fluid (1 Quart) (Part No.01320)

Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (Part No.889785)

Motive Gear – Differential Pinion Seal (Part No.4278)

Motive Gear – Differential Pinion Shim Kit (Part No.1136R)

Valvoline – ULV ATF Full Synthetic Ultra Low Viscosity Automatic Transmission Fluid, 1 Quart (Part No.888460)

Yukon Gear – Ring and Pinion Kit (Part No.24672)

Yukon Gear – Ring and Pinion Kit (Part No.24670)

Yukon Gear – Differential Parts K (Part No.14223)

Yukon Gear – RngPnnKt (Part No.24690)

USA Standard Gear – Master Overhaul Kit for 2015 & Up Mustang and F-150 (Part No.37153)

Yukon Gear – Differential Pinion (Part No.33577)

Spicer – Universal Joint, Greaseable 1350 Series (Part No.5-178X)

Spicer – Universal Joint (Part No.5-1350X)

Dorman – Driveshaft Assembly – Direct replacement (Part No.986-942)

Carquest Premium – CV Axle Assembly (Part No.NCV11274)

Carquest Premium – C/V Axle (Part No.NCV717161)

Spicer – Universal Joint (Part No.5-1350-1X)

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.232)

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.231)

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.331)