Name: Tire Pressure Monitoring System (TPMS) Sensor
Brand: ACDelco
SKU: 15114379
Price: 94.99 USD

from

$94.99

ACDelco GM Original Equipment Tire Pressure Monitoring Sensors (TPMS) are battery powered sensors located in the tire that monitor the vehicle’s tire pressure and warn the driver when pressure falls more than 25% below the manufacturer’s recommendations (normally through a slow pressure loss), and are GM-recommended replacements for your vehicle’s original components. The sensor is connected with the valve stem and, by way of Radio Frequency (RF) technology, sends pressure updates to the vehicle’s on-board computer. Tire pressure is displayed on the vehicle’s Driver Information Center (DIC) or, when low, a warning light may be illuminated to warn the driver. U.S. Federal Regulations require that new cars and light trucks be equipped with TPMS starting in 2008. These original equipment tire pressure monitoring sensors have bn manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Battery is made to last up to 10 years of normal use
Designed to communicate perfectly with your GM vehicle’s TPMS Module
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$51.99

Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:

MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
ADJUSTABLE: 0-40 degree adjustable stem fits into more aftermarket rim sets
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$462.99

The MX-Sensor 1-Sensor Bulk Box has 20 individually bagged, programmable universal TPMS sensors. The 1-Sensor features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Bulk Box of (20) Individually Bagged 1-Sensors with Rubber Press-in Valve
Combined Frequency: 315MHz & 433MHz
Programmable with Autel TPMS Service Tools
Exclusive Press Release Button to Easily Replace Valve Stems
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Meets SAE Standards J1205 & J1206
Maximum Signal Strength / Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$8.29

These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:

Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$3.49

These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:

Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$429.99

Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers.; Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough.

Product Features:

Guaranteed for life not to rust, chip, or peel.
Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
Bulk box of 100.

from

$5.99

All Continental brand TPMS parts are OE validated for fit, performance and reliability. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Pivoting valve stem for expanded wheel fitment. OE validated part identical to the dealer. Continental aftermarket TPMS sensors include all component parts for ease of installation. Waterproof sensor is impervious to tire air moisture. Then, now, and into the future, we will be there for you, our customer.

Product Features:

OE – validated part identical to the dealer
Rubber snap-in stem
Press clip design
No tools for press clip installation
TPMS service kits are required whenever performing tire replacement or service
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$27.49

Parts Kit For Gm

from

$5.99

Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:

Diamond Striped Kit for Clamp-in REDI-Sensors and many OE vehicles

from

$47.99

Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.

Product Features:

Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$30.49

Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.

Product Features:

Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$40.49

Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.

Product Features:

Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$197.99

Quickly and easily change the trim level appearance of your car, pickup truck or SUV with Impostor(R) wheel skins from Coast to Coast International. Each Impostor(R) wheel skin is designed and manufactured from automotive grade ABS to fit securely over the OE wheel. Installation in simple and secure. Pair them with CCI Grille Overlays and Door Handle or Mirror Covers for a complete package look. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:

A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Wheel Skins. Add Handles And Mirror Covers (Sold Separately) For A Factory-Style Package
Wheel Skins Are Year-Make-Model Specific And Available In Different Finishes
FIT SECURELY OVER THE ORIGINAL WHEEL, Fits Like A Glove Over Existing Wheels And Stay Securely Attached Using A Patented Retention System So You Can Be Confident That They Wont Fall Off While Driving
UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.

from

$261.99

CCI Impostor wheel skins are an easy and affordable way to upgrade the trim level appearance of your vehicle. Constructed of ABS plastic and available in a variety of finishes, CCI Impostor wheel skins are simple to install and provide years of head-turning style. Pair them with CCI grille overlays, mirror covers and door handle covers to complete the look.

Product Features:

A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Wheel Skins. Add Handles And Mirror Covers (Sold Separately) For A Factory-Style Package
Wheel Skins Are Year-Make-Model Specific And Available In Different Finishes
FIT SECURELY OVER THE ORIGINAL WHEEL, Fits Like A Glove Over Existing Wheels And Stay Securely Attached Using A Patented Retention System So You Can Be Confident That They Wont Fall Off While Driving
Emulates factory styling and enhances OEM design
UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
COMPARABLE TO HUBCAPS, Wheel Skins Are Comparable To Hubcaps But Fit Over The Original Wheel Design. They Create A Brand-New Finish To Your Original Wheels At An Economical Price
EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.

from

$181.99

Quickly and easily change the trim level appearance of your car, pickup truck or SUV with Impostor(R) wheel skins from Coast to Coast International. Each Impostor(R) wheel skin is designed and manufactured from automotive grade ABS to fit securely over the OE wheel. Installation in simple and secure. Pair them with CCI Grille Overlays and Door Handle or Mirror Covers for a complete package look. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:

A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Wheel Skins. Add Handles And Mirror Covers (Sold Separately) For A Factory-Style Package
Wheel Skins Are Year-Make-Model Specific And Available In Different Finishes
FIT SECURELY OVER THE ORIGINAL WHEEL, Fits Like A Glove Over Existing Wheels And Stay Securely Attached Using A Patented Retention System So You Can Be Confident That They Wont Fall Off While Driving
UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.

from

$45.99

This wheel cap is designed to match the fit, appearance and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this wheel cap is designed to match the fit, appearance and function of the original cap on specified vehicles
Restores functionality – reliable replacement for an original cap that is missing or damaged due to collision
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$149.99

Quickly and easily change the trim level appearance of your car, pickup truck or SUV with Impostor(R) wheel skins from Coast to Coast International. Each Impostor(R) wheel skin is designed and manufactured from automotive grade ABS to fit securely over the OE wheel. Installation in simple and secure. Pair them with CCI Grille Overlays and Door Handle or Mirror Covers for a complete package look. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:

A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Wheel Skins. Add Handles And Mirror Covers (Sold Separately) For A Factory-Style Package
Wheel Skins Are Year-Make-Model Specific And Available In Different Finishes
FIT SECURELY OVER THE ORIGINAL WHEEL, Fits Like A Glove Over Existing Wheels And Stay Securely Attached Using A Patented Retention System So You Can Be Confident That They Wont Fall Off While Driving
UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.

from

$261.99

CCI Impostor wheel skins are an easy and affordable way to upgrade the trim level appearance of your vehicle. Constructed of ABS plastic and available in a variety of finishes, CCI Impostor wheel skins are simple to install and provide years of head-turning style. Pair them with CCI grille overlays, mirror covers and door handle covers to complete the look.

Product Features:

Designed and manufactured for quality fitment and finish
Easy to install, long lasting finish
Manufactured with automotive grade ABS, Quality and durable product
Emulates factory styling and enhances OEM design
Dual layer of clear, enhances and protects paint
Center hub retention, secure fitment and easy to install

from

$8.29

These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:

Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$3.29

These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:

Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$49.99

Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers. Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough. Bulge Style Cone Seat lug nuts have an extended seating surface that is designed to match the wider seating surface used on some aluminum wheels.

Product Features:

Guaranteed for life not to rust, chip, or peel.
Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.

from

$249.99

The convenient way to order wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. McGard manufactures wheel locks and lug nuts in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts are guaranteed for life not to rust, chip or peel. Designed and built for the real world. Think about it: harsh elements, nasty corrosive wheel cleaners, overzealous impact guns, loose fitting lug wrenches and lead-foot drivers. This kind of treatment destroys ordinary lug nuts. McGard lug nuts can take the punishment and keep your wheels looking beautiful. This product may contain globally sourced materials/components.

Product Features:

User friendly key guides the key into the lock pattern for easy installation and removal.
The computer generated key designs allow for an infinite number of key patterns.
The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
Set of 20 Lug Nuts, 4 Wheel Locks, 1 Key, & 1 Key Storage Pouch

from

$299.99

The convenient way to order Tuner wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts and wheel locks are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability.

Product Features:

User friendly key guides the key into the lock pattern for easy installation and removal.
The computer generated key designs allow for an infinite number of key patterns.
The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
For aluminum wheels only.
Set of 16 Lug Nuts, 1 Installation Tool, 4 Wheel Locks, 1 Key, & Key Storage Pouch

from

$7321.99

The 300050 is a convenient bulk box of 240 individually bagged Autel MX-Sensor 1-Sensors. The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Bulk Box of (240) Individually Bagged 1-Sensors with Rubber Press-in Valve
Bulk Box of 240 Individually Bagged 1-Sensors with Rubber Press-in Valve
Combined Frequency 315MHz and 433MHz
Programmable with Autel TPMS Service Tools
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Maximum Signal Strength / Battery Reliability
Maximum Signal Strength, Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$49.99

REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now, and into the future we will be there for you, our customer.

Product Features:

Installs right out of the box
No sensor programing required
Works with all major TPMS scan tools
No training required – designed to follow existing OE vehicle relearn procedures
Faster TPMS scan tool hunt mode
Reduces SKUs
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$11.49

Kit includes four interchangeable metal valve stems. The patented press release valve design allows interchangeable rubber and metal valves to be easily replaced in the same sensor head by hand, with no valve fitting tool required. Simply click in and press out. Installing TPMS sensors has never been so easy.

Product Features:

Four Metal Valve Stems
Press-in interchangeable metal valve stem
Designed with industry leading corrosion protection technology, Autel metal valves are built to match or exceed OE tire valves.
Press release valve design allows easy installation without a tool for sensor head fitting
High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing

from

$41.99

The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Combined Frequency: 315MHz & 433MHz
Programmable with Autel TPMS Service Tools
Exclusive Press Release Button to Easily Replace Valve Stems
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Meets SAE Standards J1205 & J1206
Maximum Signal Strength / Battery Reliability
100% ID clone-able with no relearn required
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$42.99

Professional installation is strongly suggested

Product Features:

The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

2022 Chevrolet Tahoe Wheels and Tires

More 2022 Chevrolet Tahoe Wheels and Tires Categories

Essential 2022 Chevrolet Tahoe Wheels and Tires

ACDelco – Tire Pressure Monitoring System (TPMS) Sensor (Part No.15114379)

Schrader – Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc (Part No.33700)

Autel – MX-Sensor 1-Sensor Bulk Box (20) (Part No.300010)

Dorman – Wheel Lug Nut: M14-1.50 Thread, Conical 60, Bulge Acorn, 1.385" Length, Chrome, 4 Pack (Part No.711-605)

Dorman – Wheel Lug Nut: M14-1.50 Thread, Flanged, Duplex Mag, 1.659"" Length, Chrome, 1 Pack (Part No.611-279.1)

McGard – Chrome Cone Seat Style Lug Nuts (M14 x 1.5 Thread Size) – Box of 100 Lug Nuts (Part No.69424)

REDI-Sensor – Rubber snap in stem with metal press clip teeth (Part No.SE54196)

Xtra Seal – Parts Kit For Gm (Part No.17-20015AK)

Dill Air Control – TPMS Service Kit: Diamond Stripe Color Coded Service Kit, 25 Piece (Part No.7020K)

Dorman – Wheel Lug Nut Lock Set: M14-1.50 Thread, Conical 60, Bulge, 36 mm Length, Chrome, 4 Locks/1 Key (Part No.712-628)

Dorman – Wheel Lug Nut Lock Set: M14-1.50 Thread, Conical 60, Tuner, 1.43" Length, Chrome, 4 Locks/1 Key (Part No.712-681)

Dorman – Wheel Lug Nut & Lock Set: M14-1.50 Thread, Conical 60, Acorn, 1.432" L, Chrome, 16 Nuts/4 Locks/1 Key (Part No.711-641)

COAST TO COAST – 18 Inch, 5 Spoke, Black, Plastic, Set Of 4, Not Compatible With Steel Wheels (Part No.IWCIMP392BLK)

COAST TO COAST – 18", 5 Split Spokes, Snap-On/Center Retention, Chrome, Abs Plastic, Set Of 4 (Part No.IWCIMP432X)

COAST TO COAST – 18", 5 Double Spoke, Gloss Black, Plastic, Set Of 4 (Part No.IWCIMP377BLKN)

Dorman – Wheel Center Cap (Part No.909-002)

COAST TO COAST – 17", 5 Spoke, Chrome, Plastic, Set Of 4, Not Compatible With Steel Wheels (Part No.IWCIMP347X)

COAST TO COAST – 18 Inch, 5 Split Spoke, Painted, Gloss Black, Abs Plastic, Set Of 4 (Part No.IWCIMP432BLK)

Dorman – Wheel Lug Nut: M14-1.50 Thread, Conical 60, Bulge Open End, 0.832" Length, Chrome, 4 Pack (Part No.711-606)

Dorman – Pik-a-Nut – Wheel Lug Nut: M14-1.50 Thread, Conical 60, Bulge, 0.807" Length, Zinc, 1 Pack (Part No.98949.1)

McGard – Chrome Bulge Cone Seat Style Lug Nut Set (M14 x 1.5 Thread Size) – Set of 4 Lug Nuts (Part No.64033)

McGard – Black Cone Seat Wheel Installation Kit for 6 Lug Vehicles (M14 x 1.5 Thread Size) (Part No.84640)

McGard – Black SplineDrive 5 Lug Wheel Installation Kit (M14 x 1.5 Thread Size) (Part No.65510BK)

Autel – MX-Sensor 1-Sensor Bulk Box 240 (Part No.300050)

VDO REDI-Sensor – VDO Rubber Snap-in Stem REDI-Sensor (Part No.SE10001HPR)

Autel – Box of 4 Metal Press-in Valve Stems for 1-Sensor (Part No.MXSENSORMVK)

Autel – MX-Sensor 1-Sensor (Rubber) (Part No.1-SENSOR)

Huf North America – 315/433MHz Universal Sensor (Part No.UVS7051)

Popular 2022 Chevrolet Tahoe Wheels and Tires Categories

2022 Chevrolet Tahoe Wheels and Tires

Top-Rated Wheels and Tires Brands For Your 2022 Chevrolet Tahoe

Popular Dill Air Control Wheels and Tires

Top-Rated Wheels and Tires

FAQs for 2022 Chevrolet Tahoe Wheels and Tires

What are the most purchased Wheels and Tires for the 2022 Chevrolet Tahoe?

What are the top-rated 2022 Chevrolet Tahoe Wheels and Tires?

More Popular Parts for All Makes