2022 Chevrolet Colorado Engine Cooling Parts

Essential 2022 Chevrolet Colorado Engine Cooling Parts

Carquest Premium – Coolant Temperature Sensor with Washer (Part No.WTC1086)

Coolant Temperature Sensor with Washer

from

$21.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Coolant Temperature Sensor (Part No.WTC1002)

Coolant Temperature Sensor

from

$20.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

NTK – Engine Coolant Temperature Sensor (Part No.EF0174)

Engine Coolant Temperature Sensor

from

$39.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:
  • OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
  • FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
  • THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
See More

NTK – Engine Coolant Temperature Sensor (Part No.EF0022)

Engine Coolant Temperature Sensor

from

$22.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:
  • OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
  • FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
  • THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
See More

KAI – Radiator (Part No.RAD13501)

Radiator

from

$239.99
New Platinum Pro Radiator, 2.5 Liter L4 Engine

Product Features:
  • 2.5 Liter L4 Engine, Made Of Plastic and Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Radiator (Part No.RAD2707)

Radiator

from

$179.99
New Platinum Pro Radiator, 2.8/2.9/3.5/3.7 Liter Engines, Automatic Or Manual Transmission

Product Features:
  • 2.8/2.9/3.5/3.7 Liter Engines, Automatic Or Manual Transmission, Made Of Plastic and Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.813753)

Radiator: With Transmission Oil Cooler

from

$288.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
  • Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
  • OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
See More

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.433859)

Radiator: With Transmission Oil Cooler

from

$279.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
  • Oil cooler designs meet or exceed OE standards, keeping the vehicle¿s engine and transmission performing at optimal conditions
  • OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
See More

Carquest Premium – Universal Fan Clutch (Part No.216103)

Universal Fan Clutch

from

$535.99
Product Features:
  • Designed, tested, and built by application
  • OE performance, fit, and appearance
  • Precision machined
  • Out of box installation
See More

Carquest Premium – Universal Fan Clutch – 7" Thermal Heavy Duty (Part No.215138)

Universal Fan Clutch - 7" Thermal Heavy Duty

from

$94.99
Product Features:
  • Designed, tested, and built by application
  • OE performance, fit, and appearance
  • Precision machined
  • Out of box installation
See More

Carquest Premium – Thermal Fan Clutch – Severe Duty Reverse Rotation (Part No.215113)

Thermal Fan Clutch - Severe Duty Reverse Rotation

from

$93.99
Product Features:
  • Designed, tested, and built by application
  • OE performance, fit, and appearance
  • Precision machined
  • Out of box installation
See More

Carquest Premium – Universal Fan Clutch – Heavy-Duty Truck Fan Drive (Part No.216015)

Universal Fan Clutch - Heavy-Duty Truck Fan Drive

from

$138.99
Product Features:
  • OE performance, fit, and appearance
  • Designed, tested, and built by application
  • Precision machined
  • Out of box installation
See More

ACDelco – GM Original Equipment Water Pump (Part No.G3000744332ACD)

GM Original Equipment Water Pump

from

$240.47
GM Original Equipment Water Pumps are the best way to make sure you have the proper heat protection for the engine in your car, truck or SUV. Built to meet the latest manufacturer-specified designs, GM OE Water Pumps, in both cast-iron and aluminum, are thoroughly leak-tested, and feature uniform wall sections and smooth coolant-flow cavities for efficient operation and remarkable engine protection. High-quality bearings, heat-treated impellers and coated seals mean long life and trouble-free ownership. Trust ACDelco to protect your vehicle’s vital systems.

Product Features:
  • Completely pressure-tested for leak-free performance
  • High-quality bearings and heat-treated impellers for long life
  • Designed for smooth flow of coolant for superior protection
See More

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T2395)

Engine Water Pump: New, Gasket/Seals Included

from

$119.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • 100% tested for reliable performance
  • Durable housing features precisely machined mounting surface for proper sealing and fitment
  • Equipped with weep chamber or similar feature to help prevent unnecessary replacement
  • Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
  • All gaskets or seals necessary for water pump are included
  • This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
  • This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
  • This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
See More

Carquest Premium – Engine Water Pump: Gasket/Seals Included (Part No.T1235)

Engine Water Pump: Gasket/Seals Included

from

$124.99
This premium water pump uses new high quality components and is designed to meet or exceed OE specifications. This pump is 100% tested to ensure quality. Bearings, gaskets, seals, impeller, hub and housing are all designed for long-lasting service life. All necessary gaskets and seals are included.

Product Features:
  • Built to meet or exceed OE fit, form and function.
  • All components necessary for installation are supplied with pump
  • 100% tested for reliable performance
  • Follow all enclosed instructions to maximize pump life and validate warranty
See More

ACDelco – Engine Water Pump (Part No.252-901)

Engine Water Pump

from

$242.99
An ACDelco Professional, premium aftermarket Engine Water Pump circulates coolant through your vehicle’s radiator and engine system to help maintain proper engine temperature and performance. The gaskets, seals, and O-rings packaged with this Professional, premium aftermarket water pump help guarantee that all necessary parts are available for trouble-free installation. ACDelco Professional Water Pumps are a high quality replacement for many vehicles on the road today. This premium aftermarket replacement engine water pump is manufactured to meet your expectations for fit, form, and function.

Product Features:
  • All Makes water pumps fit GM vehicles as well as a wide range of non-GM vehicles
  • Thoroughly tested for reliable, leak-free performance
  • Coated seals support seal longevity and durability
  • Heat-treated shaft assemblies provide superior strength and durability over non-treated assemblies
  • High-quality bearings are permanently sealed and lubricated for greater durability and long life
  • Come with premium, high-quality replacement components needed for trouble-free and accurate installation
  • Uniform wall sections and smooth coolant-flow cavities for efficient operation
  • Cast-iron or aluminum design, depending on vehicle application
See More

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T7053)

Engine Water Pump: New, Gasket/Seals Included

from

$216.99
Carquest Premium drive motor inverter cooler water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • Built to meet or exceed OE fit, form and function
  • All components necessary for installation are supplied with pump
  • 100% tested for reliable performance
  • Follow all enclosed instructions to maximize pump life and validate warranty
See More

ACDelco – GM Original Equipment Expansion Tank Cap (Part No.G1040465619ACD)

GM Original Equipment Expansion Tank Cap

from

$17.61
An ACDelco GM Original Equipment Expansion Tank Cap is a spring loaded cap that seals the radiator filler neck or surge tank, and is a GM-recommended replacement for your vehicle’s original component. It maintains pressure on the cooling system while the engine is operating, which raises the boiling point of the engine coolant. It also replenishes the system with coolant from the expansion tank (if equipped) when the engine cools off. This original equipment radiator cap has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors. Get the GM quality you know and trust with ACDelco GM Original Equipment Thermostats and Caps. Stay with the brand of parts your General Motors vehicle came with and get peace of mind that the fit, form, and function is up to the high standards and specifications of General Motors. ACDelco GM Original Equipment Thermostats and Caps are engineered for virtually every model of GM car, light duty truck, and sport utility vehicle.

Product Features:
  • Seal and maintain pressure on the cooling system for vehicle safety
  • Raise the boiling point of the engine coolant to maintain efficiency
  • Fit most models of GM vehicles for expanded coverage
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Radiator Cap: 20 PSI (Part No.10271)

Radiator Cap: 20 PSI

from

$19.79
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.82594)

Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack

from

$11.29
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:
  • Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
  • Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
  • Seamless fit – reverse-engineered from the original equipment to fit perfectly
  • Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
See More

Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.54218CD)

Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack

from

$16.99
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:
  • Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
  • Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
  • Seamless fit – reverse-engineered from the original equipment to fit perfectly
  • Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
See More

Dorman – Dorman Expansion Tank Cap (Part No.G1040206055DOR)

Dorman Expansion Tank Cap

from

$6.90
Dorman offers a variety of Engine Coolant Recovery Tank Caps for a range of applications. All Dorman Engine Coolant Recovery Tank Caps are constructed of high-quality plastic. They effectively protect the cooling system by providing a tight seal against the elements.

Product Features:
  • Save time, money and labor by replacing only the Cap – instead of the entire Engine Coolant Recovery Tank
  • Direct replacement for a proper fit every time
  • A necessary safety item – prevents coolant from splashing and/or leaking
  • Available in diverse styles, including screw-on and snap-on
See More

Dorman – Thermostat Assembly: Includes Housing, Thermostat, and Gasket, 190 Degrees (Part No.902-847)

Thermostat Assembly: Includes Housing, Thermostat, and Gasket, 190 Degrees

from

$49.49
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
See More

Motorad – Integrated Thermostat Housing: With Gasket, 180 Degrees (Part No.1020-180)

Integrated Thermostat Housing: With Gasket, 180 Degrees

from

$98.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Motorad – Integrated Thermostat Housing: With Sensor, With Seal, 203 Degrees (Part No.931-203)

Integrated Thermostat Housing: With Sensor, With Seal, 203 Degrees

from

$61.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Dorman – Thermostat Assembly: Includes Housing, Sensor, and Gasket, 203 Degrees (Part No.902-2125)

Thermostat Assembly: Includes Housing, Sensor, and Gasket, 203 Degrees

from

$111.99
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
See More

Motorad – Integrated Thermostat Housing: With Seal, 187 Degrees (Part No.538-187)

Integrated Thermostat Housing: With Seal, 187 Degrees

from

$60.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Carquest Premium – Integrated Thermostat Housing: With Seal, 187 Degrees (Part No.48718)

Integrated Thermostat Housing: With Seal, 187 Degrees

from

$48.49
Carquest Premium Integrated Housing Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • All-in-one, bolt-on solution that includes everything needed for a complete job
  • Includes thermostat, seal and housing
  • Easy, one step fit and installation
  • No special tools required
  • Meets or exceeds all OEM standards
See More

2022 Chevrolet Colorado Engine Cooling Parts

Maybe you’re in the middle of a full rebuild of that 2022 Chevrolet Colorado. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 17 different Engine Cooling Parts in our inventory ranging from $8.99 to $535.99. That means you can find the exact parts or products you need to keep that 2022 Chevrolet Colorado running smoothly.

Engine Cooling Parts are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 2022 Chevrolet Colorado. Carquest Premium, Dorman, and Motorad are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Cooling Parts for your 2022 Chevrolet Colorado, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Engine Cooling Parts to keep your 2022 Chevrolet Colorado rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Cooling Parts Brands To Make Your 2022 Chevrolet Colorado Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2022 Chevrolet Colorado demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Colorado the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.

Popular Carquest Premium Engine Cooling Parts

We carry Carquest Premium parts in our stock across Coolant Reservoir Caps and Water Pumps categories, plus more. For a 2022 Chevrolet Colorado, our most popular Carquest Premium Engine Cooling Parts include:
Radiator Cap: 20 PSI
from $19.79
(6)
Radiator Cap: 20 PSI
Coolant Reservoir Caps
Engine Water Pump: New, Gasket/Seals Included
from $119.99
(1)
Engine Water Pump: New, Gasket/Seals Included
Water Pumps

FAQs for 2022 Chevrolet Colorado Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 2022 Chevrolet Colorado?

Out of 17 Engine Cooling Parts for the 2022 Chevrolet Colorado, the most popular in our inventory are:
Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack
from $16.99
This product is not rated
Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack
Coolant Reservoir Caps
Integrated Thermostat Housing: With Sensor, With Seal, 203 Degrees
from $61.99
This product is not rated
Integrated Thermostat Housing: With Sensor, With Seal, 203 Degrees
Thermostat and Water Outlet Assemblies
Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack
from $12.99
(1)
Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack
Coolant Reservoir Caps