2022 BMW Alpina B7 xDrive Cooling and Climate Controls
Find Your Specific 2022 BMW Alpina B7 xDrive Cooling and Climate Controls
Below you will find various in-demand BMW Cooling and Climate Controls, components and accessories for your 2022 Alpina B7 xDrive. Advance Auto Parts has popular Alpina B7 xDrive parts like Engine Cooling Parts Air Conditioning Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other Alpina B7 xDrive model years including
2012,
2013,
2014,
2015,
2017,
2018,
2019,
2020,
2021 and more. Select a category of 2022 BMW Alpina B7 xDrive Cooling and Climate Controls below and start saving instantly.
Popular 2022 BMW Alpina B7 xDrive Cooling and Climate Controls Categories
Essential Cooling and Climate Controls for 2022 BMW Alpina B7 xDrives
Carquest Premium – AC Pressure Sensor (Part No.ABA1128)
from
$85.99
The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.
Product Features:
See More
Product Features:
- Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
- Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
- All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
- All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
Rein – Cap-Expansion Tank (Part No.CPE0034)
from
$23.99
Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.
Product Features:
See More
Product Features:
- Manufactured to strict engineering standards/specifications in materials and tolerances.
- Direct fit.
- Meets or exceeds pressure specifications demanded by the OE manufacturer.
- Produced by an original equipment supplier.
Rein – Cap-Expansion Tank (Part No.CPE0030P)
from
$20.99
Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.
Product Features:
See More
Product Features:
- Manufactured to strict engineering standards/specifications in materials and tolerances.
- Direct fit.
- Meets or exceeds pressure specifications demanded by the OE manufacturer.
- Produced by an original equipment supplier.
Motorad – Radiator Cap: 30 PSI (Part No.T-65)
from
$30.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Carquest Premium – Radiator Cap: 30 PSI (Part No.T65)
from
$31.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
See More
Carquest Premium – Radiator Cap: 30 PSI (Part No.10247)
from
$25.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Carquest Premium – ABS Wheel Speed Sensor (Part No.ARC4723)
from
$221.99
Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- O-rings or seals are included (where applicable)
- Weather-tight connectors prevent leaks and corrosion for longer life
- Includes all necessary brackets and grommets for easier installation
- Extensive design validation testing and 100% end-of-line tested
- Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
- Fluorocarbon high-temperature O-ring seals coated with lubricant for easy installation prevents hub contamination.
Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA3975)
from
$193.99
Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- O-rings or seals are included (where applicable)
- Weather-tight connectors prevent leaks and corrosion for longer life
- Includes all necessary brackets and grommets for easier installation
- Extensive design validation testing and 100% end-of-line tested
- Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Carquest Premium – Coolant Temperature Sensor 1TS1493 (Part No.WTA2355)
from
$137.99
Carquest Premium coolant temperature sensors and switches are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry, Carquest Premium coolant temperature sensors and switches undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium coolant temperature sensors and switches are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- OE precision matched thermistor ensuring Carquest sensors match OE output resistances across all temperature positions
- O-rings, seals or thread sealant are included if required
- Weather-tight connectors prevent leaks and corrosion for longer life
- Extensive design validation testing and 100% end-of-line tested
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Product Features:
Delphi – Engine Coolant Temperature Sensor (Part No.TS10270)
from
$25.99
Delphi’s history is one of OE heritage and quality. Our global technical requirements include design specifications and validation testing based on over 100 years of OE experience. Our material selections, material thickness, and material types are built from OE specifications to exceed aftermarket expectations. We put in place strict manufacturing processes to ensure quality control in every part we make. Delphi’s pioneering spirit delivers innovative solutions designed to support the aftermarket in servicing the vehicles of today, and tomorrow.
Product Features:
See More
Product Features:
- Delphi temperature sensors deliver accurate readings and optimal performance
- Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
- Each sensor is electrically insulated to eliminate interference from other components in the vehicle
- Delphi temperature sensors are impervious to electrical noise and interference
Carquest Premium – Coolant Temperature Sensor 1TS1015 (Part No.WTC1038)
from
$28.99
Product Features:
See More
- Designed to meet or exceed OE specifications for fit, form and function
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- OE precision matched thermistor ensuring Carquest sensors match OE output resistances across all temperature positions
- O-rings, seals or thread sealant are included if required
- Weather-tight connectors prevent leaks and corrosion for longer life
- Extensive design validation testing and 100% end-of-line tested
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Carquest Premium – Engine Coolant Temperature Sensor (Part No.WTA2276)
from
$96.99
Carquest Premium coolant temperature sensors and switches are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry, Carquest Premium coolant temperature sensors and switches undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium coolant temperature sensors and switches are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% factory resistance calibrated to ensure extremely accurate temperature readings for optimal performance
- O-rings, seals or thread sealant are included if required
- Wires, clips and probe length match OE (where applicable)
- Weather-tight connectors prevent leaks and corrosion for longer life
- Extensive design validation testing and 100% end-of-line tested
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
NTK – Engine Coolant Temperature Sensor (Part No.EF0086)
from
$32.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to ensure proper air/fuel ratio along with proper operation of the cooling fans and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include, check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.
Product Features:
See More
Product Features:
- OE MATCHED: Wires and probe length match OE. Mounting clips included where applicable
- FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
- THE DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
Motorad – Integrated Thermostat Housing: With Sensor, With Seal, 221 Degrees (Part No.606-221)
from
$84.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Product Features:
Motorad – Integrated Thermostat Housing: With Seal, 221 Degrees (Part No.986-221)
from
$115.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Upgrade your 2022 BMW Alpina B7 xDrive with Top-Quality Cooling and Climate Controls
When it comes to maintaining or upgrading your 2022 BMW Alpina B7 xDrive, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Cooling and Climate Controls are key to keeping your Alpina B7 xDrive functioning at its best. At Advance Auto Parts, we offer a wide selection of 5 Cooling and Climate Controls for the 2022 BMW Alpina B7 xDrive, designed to meet your needs without breaking the bank.
From
Engine Cooling Part
replacements to
Air Conditioning Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2022 BMW Alpina B7 xDrive at great prices.
Our Cooling and Climate Controls inventory for this model
ranges from just $23.99 to $221.99, with
an average price of $117.19.
Our 5 Cooling and Climate Controls in stock come from 3 trusted brands, so you’re sure to find the right part for your 2022 BMW Alpina B7 xDrive without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Fluids and Chemicals, Wipers and Related Products
and more to make sure your 2022 BMW Alpina B7 xDrive is always ready to roll. We’re committed to providing you with everything you need to keep your Alpina B7 xDrive in top shape, all in one place.
Start shopping confidently below for your 2022 BMW Alpina B7 xDrive!
Best-Selling Engine Cooling Parts for 2022 BMW Alpina B7 xDrives
Enhance the driving experience in your BMW with 3 quality Engine Cooling Part components, starting at $23.99.
Rein – Cap-Expansion Tank (Part No.CPE0034)
from
$23.99
Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.
Product Features:
See More
Product Features:
- Manufactured to strict engineering standards/specifications in materials and tolerances.
- Direct fit.
- Meets or exceeds pressure specifications demanded by the OE manufacturer.
- Produced by an original equipment supplier.
Carquest Premium – Coolant Temperature Sensor 1TS1493 (Part No.WTA2355)
from
$137.99
Carquest Premium coolant temperature sensors and switches are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry, Carquest Premium coolant temperature sensors and switches undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium coolant temperature sensors and switches are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- OE precision matched thermistor ensuring Carquest sensors match OE output resistances across all temperature positions
- O-rings, seals or thread sealant are included if required
- Weather-tight connectors prevent leaks and corrosion for longer life
- Extensive design validation testing and 100% end-of-line tested
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Motorad – Integrated Thermostat Housing: With Seal, 221 Degrees (Part No.986-221)
from
$115.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Most Popular 2022 BMW Alpina B7 xDrive Air Conditioning Parts
Customize your BMW with 2 Air Conditioning Parts products
like ABS Speed Sensors and
AC Refrigerant Pressure Sensors, all
priced under $221.99.
Carquest Premium – ABS Wheel Speed Sensor (Part No.ARC4723)
from
$221.99
Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- O-rings or seals are included (where applicable)
- Weather-tight connectors prevent leaks and corrosion for longer life
- Includes all necessary brackets and grommets for easier installation
- Extensive design validation testing and 100% end-of-line tested
- Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
- Fluorocarbon high-temperature O-ring seals coated with lubricant for easy installation prevents hub contamination.
Carquest Premium – AC Pressure Sensor (Part No.ABA1128)
from
$85.99
The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.
Product Features:
See More
Product Features:
- Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
- Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
- All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
- All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
FAQs for 2022 BMW Alpina B7 xDrive Cooling and Climate Controls
Which Cooling and Climate Controls are best-sellers for 2022 BMW Alpina B7 xDrives?
Out of 5 Cooling and Climate Controls that fit 2022 BMW Alpina B7 xDrives, the following parts are the top sellers:
- Cap-Expansion Tank (11451554) – $23.99
- Integrated Thermostat Housing: With Seal, 221 Degrees (11685647) – $115.99
- Coolant Temperature Sensor 1TS1493 (50215080) – $137.99
What’s the price range for 2022 BMW Alpina B7 xDrive Cooling and Climate Controls?
Cooling and Climate Control prices for the 2022 BMW Alpina B7 xDrive start at $23.99 and go up to $221.99 for the most premium parts.
What’s the average price of a Cooling and Climate Control for a 2022 BMW Alpina B7 xDrive?
The average price for Cooling and Climate Controls for the 2022 BMW Alpina B7 xDrive is $117.19. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Cooling and Climate Controls for other BMW Alpina B7 xDrive model years?
What are the cheapest Cooling and Climate Controls for my 2022 BMW Alpina B7 xDrive?
The cheapest 2022 BMW Alpina B7 xDrive Cooling and Climate Controls we carry in stock are:
- Cap-Expansion Tank (11451554) – $23.99
- AC Pressure Sensor (12541553) – $85.99
- Integrated Thermostat Housing: With Seal, 221 Degrees (11685647) – $115.99
- Coolant Temperature Sensor 1TS1493 (50215080) – $137.99
- ABS Wheel Speed Sensor (50061331) – $221.99
What types of Cooling and Climate Controls do you sell for my 2022 BMW Alpina B7 xDrive?
As of 11/2/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2022 BMW Alpina B7 xDrive:
Can I get help with 2022 BMW Alpina B7 xDrive Cooling and Climate Control orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Cooling and Climate Controls and more.
What is your return policy for BMW Alpina B7 xDrive Cooling and Climate Controls?
Advance Auto Parts keeps returns simple. For new BMW Alpina B7 xDrive Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
