2021 Toyota Tacoma Suspension Parts

Essential 2021 Toyota Tacoma Suspension Parts

TrailFX – 2"Lift, Strut Assembly Extensions, With Strut Assembly Extensions/Hardware (Part No.T20LL1)

2"Lift, Strut Assembly Extensions, With Strut Assembly Extensions/Hardware

from

$99.99
TrailFX has produced a line of leveling and rear block kits that are engineered to provide consumers with the very best in quality performance at an attractive price point. TrailFX suspension products allow you to level your vehicle or raise it for additional tire clearance, all while maintaining your factory ride.

Product Features:
  • Fastest, Safest, Least Expensive Way To Bring The Front Of Your Vehicle Level With The Rear
  • Strut Extension Will Maintain A Smooth OEM Ride Without Adding Pressure To Stock Suspension Components
  • Toughest Finish. Safest Way To Level Lift
  • Smart Strut Technology Mounts On Top Of The Strut Assembly, Eliminating The Hassle, Time And Danger Of Compressing Springs
  • Installation Is Simple And Requires No Strut Preloading, Cutting, Or Modification Of Factory Installed Parts
See More

Skyjacker – Hydraulic, Twin Tube, Limited Lifetime Warranty, Non-Adjustable, Single (Part No.B8548)

Hydraulic, Twin Tube, Limited Lifetime Warranty, Non-Adjustable, Single

from

$75.99
The performance specific internal components of Skyjacker shocks respond to the on- and off-road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead.

Product Features:
  • Twin Tube Construction
  • Advanced Foam-Cell Technology
  • Vehicle Specific Multi-Stage Valving
  • Increased Fluid Capacity For MAX Heat Dissipation
  • 360 Degree Arc-Welded End Mount And 180 Degree Directional Mounting
  • Chrome Plated Shaft And Sintered Iron Piston
  • Comes With Black Boot
See More

Rancho – Suspension Kit (Part No.RS66903R9)

Suspension Kit

from

$487.99
Level out the front of your Toyota® Tacoma truck or 4Runner SUV by 2.25-in. with the LEVEL IT system from Rancho®. This leveling system features sway bar spacers and Rancho RS9000®XL struts for superior on-road comfort and off-road performance.

Product Features:
  • COMPATIBILITY — Designed for Toyota Tacoma trucks and 4Runner SUVs
  • LEVELED STANCE — Reduces factory rake and levels out truck’s stance by 2.25-in. (aftermarket bumpers, winches, etc. affect lift height)
  • COMPLETE SOLUTION — Kit includes two sway bar spacers, two Rancho RS9000®XL struts (coil springs not included) and mounting hardware to accommodate tires up to 33-in. (must use OE springs and top mounting components)
  • DELIVERS SUPERIOR PERFORMANCE — Rancho RS9000®XL struts with nine-position damping control for superior on-road comfort and off-road performance
  • ENHANCED CONTROL — Sway bar spacers correct end link angles for roll and sway control
  • EASY TO INSTALL — Bolt-on installation for an easy upgrade
  • COMPLETE PERFORMANCE UPGRADE FOR TACOMA– Transform your suspension with Rancho RS9000®XL rear shocks (RS999319), performance upper control arms (RS64901) and rear block kit (RS70901), all sold separately
  • COMPLETE PERFORMANCE UPGRADE FOR 4RUNNER — Transform your suspension with Rancho RS9000®XL rear shocks (RS999305), performance upper control arms (RS64903) and rear block kit (RS70080), all sold separately
  • NOTES — Allows the use of OE wheels/tires, must use OE springs and top mounting components, trimming required for 33-in. wheel/tire (tire size varies between manufacturers)
See More

Dorman – Rear Position Leaf Spring Shackle Kit (Part No.722-023)

Rear Position Leaf Spring Shackle Kit

from

$80.99
Get ahead of fatigued or rusted leaf spring shackles before they become dangerous. Made of sturdy steel with a power coated finish to resist corrosion, this leaf spring shackle is a direct replacement for your vehicle’s stock shackle.

Product Features:
  • Direct replacement – This leaf spring shackle fits and performs like original equipment shackle
  • Quality construction – manufactured from durable steel and powder coated for corrosion resistance and a long service life
  • Excellent value – original equipment quality at a lower price
  • Ready to install – all essential hardware is included for an easy installation
See More

Timbren SES – Rubber Spring, Helper Spring Kit, Frame Mount, 3600Lb Weight, Aeon Hallow Rubber (Part No.ABSTRFK)

Rubber Spring, Helper Spring Kit, Frame Mount, 3600Lb Weight, Aeon Hallow Rubber

from

$419.99
The Active Off-Road Bumpstops offer off-road enthusiasts greater control over their vehicles suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable and quiet axle engagement and disengagement. Unlike the OEM bumpstops, Timbren uses superior natural rubber compound ensuring the Active Off-Road Bumpstops will continue to operate even after a lifetime of off-road abuse. Similar to our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.

Product Features:
  • Maximize Axle Travel
  • Smooth Axle Engagement And Disengagement
  • Enhance Suspension Performance
  • ProgressiveáSpring Rate
  • Absorbs Energy And Cushions Road Shocks
  • Stronger Than OEM Bumpstops
  • Easy Installation
See More

Dorman – Upper Control Arm Bolt (Part No.926-339)

Upper Control Arm Bolt

from

$34.99
Corroded, stripped or broken control arm bolt making suspension repair difficult. This new control arm bolt matches the fit and function of the original bolt, its hardened steel construction allowing for secure installation of the control arm.

Product Features:
  • Ideal replacement – this control arm bolt is a direct replacement for a corroded, stripped or broken original equipment control arm bolt
  • Durable construction – made of hardened steel to match the function and durability of the original part
  • Cost-effective solution – offers original equipment quality at a competitive price
  • Quality tested – this part has undergone material testing and validation to ensure proper fit and long service life
See More

Dorman – Suspension Control Arm (Part No.521-815)

Suspension Control Arm

from

$205.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Belltech – 2-1/2 Inch Lift, Set Of 2, 5 Inch Maximum Wheel Back Space (Part No.34954)

2-1/2 Inch Lift, Set Of 2, 5 Inch Maximum Wheel Back Space

from

$221.99
Belltech has developed the solution to correct the lackluster handling and performance of today factory strut equipped trucks and Suv, utilizing the next generation valving technology of our new Trail Performance Shock line. In true Belltech style, combining our new leveling strut spacers with both front and rear Trail Performance shock absorbers you receive a complete solution to level your stance and rejuvenate those worn out OEM shocks and struts.

Product Features:
  • Safe/Economical Solution
  • Direct Bolt-In, No Additional Modifications
  • Allows For Installation Of Larger More Aggressive Wheel/Tire Combo
  • Easy To Install
See More

KYB – Strut Mount, Insulator, Bushing and Washers (Part No.SM5640)

Strut Mount, Insulator, Bushing and Washers

from

$41.49
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:
  • The Highest Quality Replacement Strut Mount Available
  • Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
  • Superior Rubber Reduces Noise, Vibration And Harshness
  • Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
  • Matched Grade Studs And Nuts
See More

Monroe – Strut-Mate Strut Mount Stud Plate (Part No.907921)

Strut-Mate Strut Mount Stud Plate

from

$39.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:
  • PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
  • REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
  • REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
  • RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
  • EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
See More

KYB – Gas Shock (Part No.343209)

Gas Shock

from

$52.99
Product Features:
  • #1 recommended Original Equipment replacement choice for import trucks
  • Specifically calibrated to help restore the original handling and control characteristics of Toyota trucks
  • Uses a seamless working cylinder matched with a Teflon coated piston band for a positive seal and longer life
  • Triple chrome plated piston rod and multi-lip oil seals that reduce wear
  • Solid seamless mounting eye rings and bolt bushings to eliminate rattles
  • Engineered to help vehicles with electronic safety systems (ESC, ABS, etc.)
See More

Monroe – OESpectrum Strut (Part No.71371)

OESpectrum Strut

from

$159.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • IMPROVES STABILITY — ASD (Acceleration Sensitive Damping) valving technology and fluon-banded piston deliver greater control and handling while improving ride comfort
  • EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
  • LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • Unique Rod Guide and Single Lip Seal: Bronze reinforced rod guide bearing and special seal provides longer service life and consistent performance.
  • Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
See More

Valvoline – DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

from

$14.49
Valvoline DEXRON®-VI ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors’ DEXRON®-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON®-II and/or DEXRON®-III are recommended. Recommended for use in the following applications: DEXRON®-VI, DEXRON®-III, DEXRON®-II, and Allison C-4.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Valvoline – Transfer Case Fluid, 1 Quart (Part No.855459)

Transfer Case Fluid, 1 Quart

from

$14.99
Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:
  • Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
  • Formulated to help prevent gear wear and protect against rust and corrosion
  • Formulated to deliver enhanced protection against deposits
  • Helps provide better protection during extreme operating conditions
See More

Timbren SES – Rubber Spring, Inside Coil Spring Mount, 14,000Lb, Aeon Hollow Rubber (Part No.TOFTUN4)

Rubber Spring, Inside Coil Spring Mount, 14,000Lb, Aeon Hollow Rubber

from

$306.99
Timbren suspension enhancement system The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:
  • Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
  • Control Trailer Sway: A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
  • Control Body Roll: During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
  • Improve The Ride: By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesn’t Have To Mean Poor Ride Quality
  • Economical And Trouble Free
  • Simple And Easy To Install
See More

Timbren SES – Rubber Spring, Inside Coil Spring Mount, Aeon Hollow Rubber, With Helper Springs (Part No.TORTUN4L)

Rubber Spring, Inside Coil Spring Mount, Aeon Hollow Rubber, With Helper Springs

from

$306.99
Timbren suspension enhancement system – The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:
  • Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
  • Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
  • Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
  • Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
  • Economical And Trouble Free
  • Simple And Easy To Install
See More

Carquest Premium – Control Arm Bushing (Part No.223-83976)

Control Arm Bushing

from

$19.79
CARQUEST PREMIUM Chassis parts are engineered and benchmarked to Original Equipment (OE) performance standards. CARQUEST PREMIUM Chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  CARQUEST PREMIUM Chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  CARQUEST PREMIUM Chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.

Product Features:
  • OE matched design for Form, Fit, and Function
  • Engineered to reduce road noise and provide a stable ride.
  • Hardware included for easier installation (where applicable)
See More

Driveworks – CONTROL ARM BUSHINGS EA DRIVE (Part No.DW-K200119)

CONTROL ARM BUSHINGS EA DRIVE

from

$14.49
Driveworks Brand Control Arm Bushings are made to meet OE specifications. They play a role that isolate the high-frequency inherent vibration from the vehicle. Driveworks Brand chassis parts ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Replacement helps reduce vehicle noise and sway while turning
See More

Timbren SES – Rubber Spring Inside Coil Spring Mnt 6000 Lb. Cap AEON Rubber Helper Springs/ Brackets/ Hardware (Part No.TORTUN4)

Rubber Spring Inside Coil Spring Mnt 6000 Lb. Cap AEON Rubber Helper Springs/ Brackets/ Hardware

from

$306.99
Timbren suspension enhancement system The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:
  • Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
  • Control Trailer Sway: A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
  • Control Body Roll: During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
  • Improve The Ride: By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesn’t Have To Mean Poor Ride Quality
  • Economical And Trouble Free
  • Simple And Easy To Install
  • Limited Lifetime Warranty
See More

Timbren SES – Rubber Spring, Inside Coil Spring Mount, 6,000Lb, Aeon Hollow Rubber (Part No.TORTAC4A)

Rubber Spring, Inside Coil Spring Mount, 6,000Lb, Aeon Hollow Rubber

from

$306.99
Timbren suspension enhancement system – The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:
  • Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
  • Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
  • Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
  • Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
  • Economical And Trouble Free
  • Simple And Easy To Install
See More

aFe POWER – Sway-A-Way Shock Kit (Part No.102-0052-01)

Sway-A-Way Shock Kit

from

$796.99
aFe Control introduces these Sway-A-Way High Performance replacement shock absorbers for the 2005-2020 Toyota Tacoma.. These 2.0″ diameter shocks feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will bolt directly into your daily driven vehicle. This kit offers adjustable ride height and better off road damping curves without sacrificing any on road comfort or handling. These rear shocks are 100% designed and built in the USA that feature bright zinc plated steel cylinder bodies and CNC machined aluminum components. This package is designed as a direct fit application and requires no modifications to the vehicle.

Product Features:
  • CNC Machined Components Made To The Strictest Tolerances
  • Polished Nitro Steel Shaft for Strength And Durability
  • Teflon Lined Steel Spherical Bearings
  • Multi-Seal Carrier To Ensure Zero Leakage
See More

Suncore – Shock Kit (Part No.2-12S254051-001)

Shock Kit

from

$39.99
Shock Kit

Sachs – Shock Mounting Kit (Part No.L4049573997SAC)

Shock Mounting Kit

from

$70.25
Shock Mounting Kit

AST – Polyurethane Sway Bar Link Bushing (Part No.L10311094426AST)

Polyurethane Sway Bar Link Bushing

from

$11.37
Advanced Suspension Technology bushings offer a unique polyurethane alternative to conventional rubber suspension bushings. AST bushings are urethane-based and are impregnated with graphite to aid in lubrication and reduce noise. Polyurethane bushings are stronger and last longer than standard rubber bushings. Most modern production vehicles are designed using rubber bushings which have a limited lifespan. This contributes to suspension failure due to vehicular weight and the inherent design of high-tech suspensions. Typically this results in less than desirable vehicle handling and can cause many related parts to wear out more rapidly than necessary. Polyurethane corrects this problem and in many cases improves vehicle handling and drivability. Once removal of original bushings has taken place, installation of the new polyurethane bush typically takes from 1 – 5 minutes to install.

Product Features:
  • Unique polyurethane alternative
  • Sleeves in the bushings freely rotate which enhances longevity
  • Impregnated with graphite to aid in lubrication and reduce noise
  • Alternative to conventional rubber suspension bushings
See More

Energy Suspension – Leaf Spring Bushing Set (Part No.8.2108R)

Leaf Spring Bushing Set

from

$60.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Adds Dramatic Amount of Performance/Durability
  • Helps Vehicle Be in Control
  • Allows the Suspension to Function Properly
See More

AST – Polyurethane Leaf Spring Bushing (Part No.L5003578811AST)

Polyurethane Leaf Spring Bushing

from

$23.98
Advanced Suspension Technology bushings offer a unique polyurethane alternative to conventional rubber suspension bushings. AST bushings are urethane-based and are impregnated with graphite to aid in lubrication and reduce noise. Polyurethane bushings are stronger and last longer than standard rubber bushings. Most modern production vehicles are designed using rubber bushings which have a limited lifespan. This contributes to suspension failure due to vehicular weight and the inherent design of high-tech suspensions. Typically this results in less than desirable vehicle handling and can cause many related parts to wear out more rapidly than necessary. Polyurethane corrects this problem and in many cases improves vehicle handling and drivability. Once removal of original bushings has taken place, installation of the new polyurethane bush typically takes from 1 – 5 minutes to install.

Product Features:
  • Unique polyurethane alternative
  • Sleeves in the bushings freely rotate which enhances longevity
  • Impregnated with graphite to aid in lubrication and reduce noise
  • Alternative to conventional rubber suspension bushings
See More

AST – Leaf Spring Bushing (Part No.L5003232775AST)

Leaf Spring Bushing

from

$23.92
Leaf Spring Bushing

Energy Suspension – Shackle Bushing Set (Part No.8.2111R)

Shackle Bushing Set

from

$13.99
Product Features:
  • Made from HYPER-Flex Polyurethane
See More

2021 Toyota Tacoma Suspension Parts

You count on your 2021 Toyota Tacoma to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 46 Suspension Parts ranging in price from $6.29 to $1,819.99, you’re sure to find everything you need for your 2021 Toyota Tacoma.

Brands matter. If you want to shop a specific Suspension Parts brand, we stock 17 different brands like Valvoline, Monroe, and Rancho. 2021 Toyota Tacoma Suspension Parts start as low as $6.29!

One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 405 extensive product reviews on 2021 Toyota Tacoma Suspension Parts. Some of the top-rated Suspension Parts products we carry are RS9000XL Shock Absorber with 5.0 stars.

Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 2021 Toyota Tacoma below to get started!

Top-Rated Suspension Parts Brands For Your 2021 Toyota Tacoma

Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2021 Toyota Tacoma running right for years to come. In our inventory you’ll find brands like Valvoline, Monroe, Rancho, and even more.

Popular Monroe Suspension Parts

You’ll find popular Monroe brand products across Shocks and Struts. All are waiting to get your 2021 Toyota Tacoma back on the road. Some of the top-rated Monroe products in these categories are:
Gas-Matic Strut
from $97.99
(2)
Gas-Matic Strut
Front Shock and Struts
OESpectrum Strut
from $159.99
(1)
OESpectrum Strut
Front Shock and Struts
OESpectrum Light Truck Shock Absorber
from $91.99
(9)
OESpectrum Light Truck Shock Absorber
Rear Shock and Struts

FAQs for 2021 Toyota Tacoma Suspension Parts

What are the most purchased Suspension Parts for the 2021 Toyota Tacoma?

Out of 46 Suspension Parts for the 2021 Toyota Tacoma, the most popular in our inventory are:
DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart
from $11.99
This product is not rated
DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
Strut Mount, Insulator, Bushing and Washers
from $41.49
(1)
Strut Mount, Insulator, Bushing and Washers
Suspension Strut Mount Kits
RS5000X Shock Absorber
from $83.99
This product is not rated
RS5000X Shock Absorber
Rear Shock and Struts

What are the top-rated 2021 Toyota Tacoma Suspension Parts?

Top-rated Suspension Parts for your 2021 Toyota Tacoma based on customer reviews/ratings are:
RS9000XL Shock Absorber
from $161.99
(1)
RS9000XL Shock Absorber
“Top of the line I can fit my fat girls in the back without bottoming out”