2021 Toyota Tacoma Ignition and Tune-Up Products
More 2021 Toyota Tacoma Ignition and Tune-Up Products Categories
If you’re looking for an original Ignition and Tune-Up Products replacement for a 2021 Toyota Tacoma, you can search through our selection below. You’ll also find aftermarket and OEM Ignition and Tune-Up Products to meet your needs.
Essential 2021 Toyota Tacoma Ignition and Tune-Up Products
Delphi – Ignition Coil (Part No.GN10356)
from
$93.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.
Product Features:
See More
Product Features:
- Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
- Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
- Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
- We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1828)
from
$58.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- Extensive design validation testing to ensure long-lasting reliability
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Delphi – Ignition Coil (Part No.GN10184)
from
$92.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.
Product Features:
See More
Product Features:
- Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
- Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
- Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
- We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1716)
from
$40.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1417)
from
$38.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- Extensive design validation testing to ensure long-lasting reliability
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
ACDelco – Premium Double Platinum Tip Copper Core Spark Plug: Long-Lasting Performance & Durability (Part No.41-806)
from
$9.79
ACDelco Gold (Professional) Double Platinum Spark Plug are a high quality alternative to Original Equipment (OE) parts. With a copper core and double platinum pads on the center electrode, these plugs are designed to deliver long-lasting performance. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.
Product Features:
See More
Product Features:
- One-piece, fired-in suppressor seal blends three glass types for a gas-tight seal that helps reduce radio frequency and engine interference, regulate spark plug energy, and protect against compression pressures for long life
- Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system
- Pure copper core results in cooler electrode temperature for maximized durability and fouling resistance
- Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
- Premium aftermarket replacement part
- Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
- Resistor Type: Includes a resistor to reduce radio frequency interference, ensuring smooth engine performance.
- Flat Seat Type: Designed with a flat seat type for a secure and precise fit.
DENSO – Iridium Long-Life Spark Plug: OE Performance, last 100K+ Miles, SK20HR11 (Part No.3421)
from
$11.49
Manufactured to the strictest OE performance, durability and emissions standards.
Product Features:
See More
Product Features:
- Latest OE technology with DENSO’s patented Iridium Alloy (90% Ir) and fine wire center electrode
- Platinum ground electrode for extended life
- DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
- Sustained spark performance over 100,000 miles
- Lasts up to three times as long as conventional plugs
- Endures extreme temperatures greater than 4,000 degrees F associated with high-performance ignition and special fuel systems
- Iridium Long Life
- Enhanced Engine Performance: Enjoy more horsepower, faster and easier starts, and fewer misfires under heavy loads, thanks to the advanced properties of DENSO’s Iridium alloy.
- Fuel Efficiency: Experience better conservation of fuel at all times, contributing to overall vehicle efficiency and cost savings.
NGK – Laser Iridium Spark Plug (Part No.F1000225742NGK)
from
$13.11
NGK’s Laser Iridium Spark Plugs Provide Superior Ignitability and Long Service Life. Fine Wire Iridium Tipped Center Electrode and Fine Wire Platinum Tipped Ground Electrode Ensures Slow Wear Rate Providing Stable Idle, Superior Anti Fouling, Improved Fuel Efficiency and Lower Emissions.
Product Features:
See More
Product Features:
- Trivalent Metal Plating Provides Superior Anti-Corrosion and Anti-Seizing Properties
- Corrugated Ribs Prevent Flashover
- Pure Alumina Silicate Ceramic Insulator, Provides Superior Strength and Better Heat Transfer
- Copper Core Aids in Heat Removal
- Triple Seals Prevent Leakage
Motorcraft – Spark Plug (Part No.SP-406)
from
$2.49
The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.Long Service Intervals: 100,000 mile service interval, High-Strength Steel High Thread, Platinum-Iridium, Fine-Wire Double Platinum, 60,000-100,000 mile service interval, Up to 60,000 mile service interval: Nickel, Standard Copper Core.
See More
NGK – Laser Iridium Spark Plug – Superior Performance & Longevity (Part No.4996)
from
$13.49
NGK Laser Iridium spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium spark plugs are tested to the highest standards to ensure quality and durability. Iridium tipped center electrode provides durability six times harder than platinum. NGKs high grade pure alumina ceramic and 98 percent pure copper core prevents the spark plug from overheating while providing reliable starts. Most Laser Iridium spark plugs feature a platinum pad on the ground electrode for even wear in distributorless ignition systems.
Product Features:
See More
Product Features:
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire iridium alloy center electrode provides consistent performance
- IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
- PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- RECOMMENDED USAGE: Best for vehicles with OE fine wire iridium alloy plugs
- Superior Durability: The iridium-tipped center electrode is six times harder than platinum, ensuring long-lasting performance.
- Engineered for OE Applications: Specifically designed and tested to meet the highest standards for original equipment applications.
- Flat Seat Type: Designed with a flat seat type for optimal fit and performance.
Suncore – Shock Absorber (Part No.12S254051)
from
$19.99
Shock Absorber
Suncore – Shock Absorber (Part No.12S254070)
from
$19.99
Shock Absorber
Idemitsu – Power Steering Fluid – 12 oz (Part No.30102-052A)
from
$6.29
IDEMITSU Premium PSF is specifically engineered to meet the demanding performance requirements of Honda and Acura power steering units. This advanced technology fluid is formulated with premium quality base oils and the latest additive technologies to provide outstanding protection and performance under the most servere environmental and driving conditions.IDEMITSU Premium PSF can also be used in most Asian Original Equipment Manufacturer (OEM) power steering units that do not utilize electronic power steering technology.
Product Features:
See More
Product Features:
- Unique friction technology provides efficient and noise-free operation
- Advanced formulation technology provides outstanding protection to the entire power steering system while delivering smooth performance under the most severe operating conditions
- Superior low temperature performance for easy flow and protection against cavitation and elimination of “squawking” and “squealing”
- Excellent compatibility with seals, gaskets and internal components to reduce the potential for leaks and ensures smooth performance over extended intervals
- Robust anti-wear and inhibitor chemistry provides enhanced component and fluid durability and long-life
Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3696)
from
$172.99
MotoRad Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
- Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
NTK – Ignition Knock (Detonation) Sensor (Part No.ID0166)
from
$177.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- Reinforced and extra-strength components are used to reduce chance of part failure and prevent corrosion and moisture penetration. Mounting threads match OE for easy, worry free installation.
- NTK’s Ignition Knock Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper ignition timing. This advanced technology is used for durability, drivability and fuel economy.
- The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock, or detonation, to alter the ignition timing and prevent detonation.
Encore Automotive – Genuine OE Ignition Knock (Detonation) Sensor (Part No.SKS-J50006)
from
$147.99
Encore Automotive Genuine OE knock sensor detects excessive/unusual pulses caused by the engine ignition and makes proper adjustments to reduce the risk of damaging pistons. Encore Automotive is dedicated to bringing the latest original equipment technologies to the Aftermarket to provide the highest overall value.
Product Features:
See More
Product Features:
- Genuine OE Part
- Highly accurate engine vibration detection
- Excellent material quality
NTK – Ignition Knock (Detonation) Sensor (Part No.ID0215)
from
$119.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- Reinforced and extra-strength components are used to reduce chance of part failure and prevent corrosion and moisture penetration. Mounting threads match OE for easy, worry free installation.
- NTK’s Ignition Knock Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper ignition timing. This advanced technology is used for durability, drivability and fuel economy.
- The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock, or detonation, to alter the ignition timing and prevent detonation.
Carquest Premium – Knock Sensor (Part No.SBC3989)
from
$144.99
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
- Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3663)
from
$84.99
MotoRad Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
- Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3766)
from
$137.99
MotoRad Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
- Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
DENSO – Original Equipment Quality Direct Ignition Coil (Part No.673-1102)
from
$97.99
As the innovator and leader in stick coil technology DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.
Product Features:
See More
Product Features:
- First Time Fit
- Built to DENSO Original Equipment Standards
DENSO – Original Equipment Quality Direct Ignition Coil (Part No.673-1100)
from
$76.99
As the innovator and leader in stick coil technology DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.
Product Features:
See More
Product Features:
- First Time Fit
- Built to DENSO Original Equipment Standards
DENSO – Original Equipment Quality Direct Ignition Coil (Part No.673-1308)
from
$81.99
As the innovator and leader in stick coil technology DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.
Product Features:
See More
Product Features:
- First Time Fit
- Built to DENSO Original Equipment Standards
Popular 2021 Toyota Tacoma Ignition and Tune-Up Products Categories
2021 Toyota Tacoma Ignition and Tune-Up Products
You count on your 2021 Toyota Tacoma to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 26 Ignition and Tune-Up Products ranging in price from $3.49 to $181.99, you’re sure to find everything you need for your 2021 Toyota Tacoma.
Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 11 different brands like Autolite, E3, and DENSO. 2021 Toyota Tacoma Ignition and Tune-Up Products start as low as $3.49!
One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 3,978 extensive product reviews on 2021 Toyota Tacoma Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, IKH20TT with 4.8 stars and Copper Plus Spark Plug: Dependable Performance, OE Replacement, REC12MCC4 with 4.7 stars.
Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 2021 Toyota Tacoma below to get started!
Top-Rated Ignition and Tune-Up Products Brands For Your 2021 Toyota Tacoma
Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2021 Toyota Tacoma running right for years to come. In our inventory you’ll find brands like Autolite, E3, DENSO, and even more.
Popular NGK Ignition and Tune-Up Products
You’ll find popular NGK brand products across Spark Plugs. All are waiting to get your 2021 Toyota Tacoma back on the road. Some of the top-rated NGK products in these categories are:
from
$19.49
(1)
OE Series Laser Iridium High Ignitability Spark Plug: DFE Tip Design, DILFR6D8D
Spark Plugs
Top-Rated Autolite Ignition and Tune-Up Products
If Autolite are what you’re looking for, our inventory holds plenty. We stock Autolite brand Ignition and Tune-Up Products for your 2021 Toyota Tacoma, and some of our most reviewed Autolite parts include:
from
$9.99
(166)
Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition
Spark Plugs
from
$4.79
(131)
Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration
Spark Plugs
from
$6.79
(87)
Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life
Spark Plugs
FAQs for 2021 Toyota Tacoma Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the 2021 Toyota Tacoma?
Out of 26 Ignition and Tune-Up Products for the 2021 Toyota Tacoma, the most popular in our inventory are:
from
$10.99
This product is not rated
Iridium Ultra Finewire Spark Plug: Optimal Performance, Durability, Ignitability
Spark Plugs
from
$13.49
(12)
Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, IKBH20TT
Spark Plugs
What are the top-rated 2021 Toyota Tacoma Ignition and Tune-Up Products?
Top-rated Ignition and Tune-Up Products for your 2021 Toyota Tacoma based on customer reviews/ratings are:
from
$10.99
(16)
Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, IKH20TT
“Vehicle”
from
$4.99
(9)
Copper Plus Spark Plug: Dependable Performance, OE Replacement, REC12MCC4
“These all came perfectly gaped and ready, I cheapies all 16 of them and they were perfect. The store did a great job in ordering and getting them in f”
from
$3.49
(1)
Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration
“Comes pre gapped and affordable”
