Name: Molded Heater Hose; EPDM Rubber, 9/32 Inch Diameter, 5 Inch Length
Brand: Dayco
SKU: 86815
Price: 8.29 USD

from

$8.29

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$14.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$15.79

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.

Product Features:

It resists electrochemical degradation and water permeation
Use with heating pipe connectors and bulk heating hoses to create custom assemblies
Compatible with cooling, air and water applications
EPDM tube and cover, synthetic fiber reinforcement
SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
temperature range Deg. F to +275 degrees F (-40 degrees C to +135 degrees C)
Caution: Do not use for fuel or oil transfer applications

from

$36.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$30.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Designed to resist electrochemical degradation, the main cause of casing failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube; reinforced with knitted synthetic fibers; EPDM lid resistant to heat, ozone, and chemical refrigerants
It meets the requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
Warning: Do not use for fuel or oil transfer applications

from

$38.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$32.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$37.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Designed to resist electrochemical degradation, the main cause of casing failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube; reinforced with knitted synthetic fibers; EPDM lid resistant to heat, ozone, and chemical refrigerants
Compliant with the requirements of SAE 20R4, class D2 and DIN 73411, class A standards (except with regard to tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing the clamps and connectors each time a new radiator hose is installed.
Caution: Do not use for fuel or oil transport applications.

from

$87.99

This accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles. It is engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue.

Product Features:

Direct replacement – this accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles
Ideal solution – engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$139.99

This accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles. It is engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue.

Product Features:

Direct replacement – this accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles
Ideal solution – engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$111.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
Meets or exceeds OE quality

from

$70.99

This accessory drive tensioner is designed and engineered by Litens – the world’s largest supplier of original equipment (O.E.) belt tensioners in the world. This part was designed for the 2013-2018 Nissan Altima,Pathfinder,Murano, Quest / 2013 Infiniti JX35 / 2014-2015 Infiniti QX60 with 3.5L. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part. This part is manufactured to meet or exceed the performance and life specifications of the O.E. part. The part features a premium chrome-silicon steel spring, internal damping, a lift-lug feature for ease of installation, a 6203 ball bearing and a plastic pulley molded to exacting specifications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Designed and engineered by the world’s largest Original Equipment supplier of accessory drive tensioners and pulleys
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
A plastic pulley specifically molded with tight radial run out for reduced noise and longer life
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
Installation instructions included

from

$124.99

This Litens supplied tensioner is manufactured to original equipment specifications. This part is specifically designed for Nissan applications. Heavy duty steel pulley construction ensures long life and trouble-free performance. This tensioner meets or exceeds all original equipment fit, form, and performance characteristics. For maximum performance and durability, always use genuine Litens components. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Heavy duty steel pulley construction
OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
Installation instructions included

from

$27.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$62.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Materials specifically designed to resist collapse under vacuum
Designed to resist electrochemical degradation, which is the primary cause of hose failure
Pre-shaped to fit and ensure a perfect seal
EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
Compliant with the requirements of SAE 20R4, class D2 and DIN 73411, class A standards (except with regard to tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transport applications.

from

$28.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$27.99

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:

Improved sealing surface for greater leak resistance
Their high flexibility makes installation easier
Maximum vehicle coverage with minimal inventory
Resistant to heat, oil and ozone
Rated for SAE 20R5 Class D-2 performance
Temperature range: up to +257 degrees Celsius. F (+125 Deg. C)
Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
Caution: Do not use for fuel or oil transfer applications

from

$44.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$16.79

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$67.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$2.49

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures for long periods of time, which prolongs the service life
Meets SAE 20R3 Standard Wall Class D-2 requirements
Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Caution: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

from

$46.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$1.79

We are proud to offer this CARQUEST product line: CARQUEST Premium Heater Hose By Gates

Product Features:

Good resistance to high temperatures for extended periods of time, which prolongs service life
Meets SAE 20R3 Standard Wall Class D-2 requirements
Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Caution: Do not use for fuel or oil transfer applications
CAUTION: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

from

$32.99

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

The special belt construction eliminates noise, reduces tension loss, and solves transmission problems.
EPDM rubber constructions resist cracking on the surface of the ribs
Meets or exceeds all specifications from the Original Equipment Manufacturer
It is recommended to replace the tensioner (if equipped).
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$26.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads
Made in the USA

from

$31.99

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
The shape is rectified to ensure precise dimensional control of the top width and side wall for a proper fit to the pulley.
Thermoactive traction ropes for maintenance-free performance when properly installed and tensioned
It resists oil, heat, ozone, weather, and decay to improve belt life.
Meets or exceeds SAE J636C specifications

from

$13.49

Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility – 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$35.99

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

The fiber-reinforced rubber support adds flexibility along the belt and provides greater lateral stability on the pulley.
The shape is rectified to ensure precise dimensional control of the top width and side wall for a proper fit to the pulley.
Thermally active tension cords for maintenance-free operation when the belt is properly installed and tensioned
It resists oil, heat, ozone, weather, and decay to improve belt life.
Meets or exceeds SAE J636C specifications

2021 Nissan Maxima Belts and Hoses

Dayco – Molded Heater Hose; EPDM Rubber, 9/32 Inch Diameter, 5 Inch Length (Part No.86815)

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 7 Inch Length (Part No.88387)

Gates – Molded 90 Degree Heater Hose (Part No.28474)

Dayco – Molded Heater Hose; EPDM Rubber, 5/16 Inch Diameter, 8 1/4 Inch Length (Part No.86800)

Gates – Premium Molded Coolant Hose (Part No.22963)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17" Long, 1.28" Diameter (Part No.E72150)

Dayco – Molded Heater Hose; EPDM Rubber, 3/8 Inch Diameter, 9 1/4 Inch Length (Part No.87000)

Gates – Premium Molded Coolant Hose (Part No.22183)

Dorman – Automatic Belt Tensioner (Tensioner Only) (Part No.419-038)

Dorman – Automatic Belt Tensioner (Tensioner Only) (Part No.419-377)

Dayco – Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89676)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999502A)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999542A)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 18" Long, 1.31" Diameter (Part No.E72148)

Gates – Premium Molded Coolant Hose (Part No.22184)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10" Long, 1.31" Diameter (Part No.B71638)

Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25257)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16" Long, 1.34" Diameter (Part No.C71795)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 10 Inch Length (Part No.87633)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 11 Inch Length (Part No.87631)

Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28409)

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 14 Inch Length (Part No.88401)

Gates – Premium 5/16 X 50 Ft Heater Hose by Gates (sold by each) (Part No.28408)

Gates – Micro-V Serpentine Drive Belt (Part No.K070669)

Dayco – Poly Rib Belt Serpentine Belt; 67.01 Long, 7 Rib Count (Part No.5070670)

Gates – Automotive XL High Capacity V-Belt (Part No.9480)

Dayco – V-Belt, Top Cog, Dayco (Part No.22405)

Gates – Automotive XL High Capacity V-Belt (Part No.9360)

Gates – Premium 5/16 X 50 Ft Heater Hose by Gates (sold by each) (Part No.28408)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999502A)

Dayco – Serpentine Belt Tensioner: 1 Piece, Built To Outperform And Outlast OE Parts (Part No.89722)

Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28407)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19.5" Long, 1.38" Diameter (Part No.E72598)

Gates – Molded 90 Degree Heater Hose (Part No.28466)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13.5" Long, 1.38" Diameter (Part No.D72599)

Dayco – Aramid Cord Poly Rib Belt Serpentine Belt; 40.75 Long, 7 Rib Count (Part No.A070407)