2021 GMC Canyon Engine Parts
Find Your Specific 2021 GMC Canyon Engine Parts
Below you will find various in-demand GMC Engine Parts, components and accessories for your 2021 Canyon. Advance Auto Parts has popular Canyon parts like Engine Gaskets and Seals, Engine Timing Parts, Camshafts and more. You’ll also find aftermarket and OEM Engine Parts for other Canyon model years including
2011,
2012,
2015,
2016,
2017,
2018,
2019,
2020,
2022 and more. Select a category of 2021 GMC Canyon Engine Parts below and start saving instantly.
Popular 2021 GMC Canyon Engine Parts Categories
Essential Engine Parts for 2021 GMC Canyons
Victor Reinz – Molded Rubber Valve Cover Gasket Set: Direct Fit, Includes Grommets, 36 Pieces (Part No.15-10417-01)
from
$112.99
Oil drops on the driveway are a distant memory thanks to sophisticated engine valve cover and gasket designs. Victor Reinz is at the forefront of engineering the latest sealing technology. Although the primary task of valve cover gaskets is to seal oil and oil spray, they must withstand high temperatures brought on by nearby exhaust manifolds, exhaust crossovers in the cylinder heads, and EGR systems. Victor Reinz valve cover gaskets deliver the quality materials you demand. Where appropriate, Victor Reinz valve cover gaskets are designed with compression limiters to prevent over-torquing, splitting, or the need to retorque.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- Application specific molded rubber construction
- Engineered cross section
- Includes all components required to complete the repair
INA US – ENGINE TIMING CHAIN (Part No.ZC0192)
from
$28.99
ENGINE TIMING CHAIN
Carquest Premium – Engine Oil Filler Cap: Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10099)
from
$11.99
Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
Product Features:
See More
Product Features:
- Provides proper seal to ensure leak prevention
- Stops engine blow by
- High quality construction
- Meets all OEM specifications
Dorman – Engine Oil Pan (OE Fix) (Part No.266-010)
from
$90.99
When the pressed-in drain plug receptacle of the original equipment engine oil pan on certain General Motors vehicles leaks due to an improperly tightened oil drain plug, the dealership’s repair solution is to replace that failed engine oil pan with a replacement of the same design using a pressed-in plug boss. This only invites another future pan failure, leaks and potential engine damage. This Dorman OE FIX oil pan design replaces that original equipment oil pan but features a bung that’s welded into place to help prevent similar issues. The plug boss has been upgraded to a larger thread size to help prevent damage from future over-torque scenarios. A new crush washer and gasket are included for a complete repair, and the included magnetic drain plug offers additional engine protection.
Product Features:
See More
Product Features:
- Upgraded repair – this engine oil pan is has a welded-in drain plug bung designed to be more resistant to leaks caused by an overtightened drain plug than the original equipment pan
- Protects engine – included magnetic drain plug helps prevent harmful metal debris from damaging the engine in the future
- Restores functionality – reliable replacement for an oil pan that has failed due to a pressed plug bung that has broken free and is leaking
- Direct replacement – upgraded pan with oversized plug still installs like OE on specified GM vehicles
Anchor – Engine Mount: Front Left, 1 Piece (Part No.3359)
from
$134.99
Anchor 3359 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2009-2012
- Weight approx: 3 Lbs
- Part Group: 3359, 3360
K&N – Charge Pipe Kit (Part No.77-1021KC)
from
$419.99
K&N charge pipe kits are made of free-flowing, mandrel-bent aluminum tubes designed to replace the restrictive factory intercooler piping on specific turbo charged vehicles and offer a wide range of performance customization options. K&N charge pipes have been engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo through the intercooler. The charge pipes are constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. For additional horsepower gains and improved engine compartment aesthetics, K&N offers a wide range of cold air intake systems that can be installed into your vehicle as well. The charge pipe kits are easy to install with commonly available tools and it is backed by K&N’s No-Hassle Limited Warranty.
See More
Cloyes Gear – OIL PUMP TENSIONER (Part No.9-6040)
from
$21.99
Since 1921, Cloyes has been the trusted leader in automotive timing systems, delivering premium-quality solutions. An oil pump chain tensioner maintains appropriate tension on the oil pump chain. Depending on design and application, Cloyes engine oil pump chain tensioners can use spring tension or hydraulic pressure to properly tension the chain for optimal performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading warranty and technical support.
Product Features:
See More
Product Features:
- CAD designed and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
- Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
- Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
- Backed by Limited Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
- Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience
Dorman – Variable Valve Timing Solenoid (Part No.917-219)
from
$70.99
This replacement engine variable valve timing (VVT) solenoid is precision-engineered to match the fit and function of the original VVT solenoid. Made of quality materials for a long service life, it has been tested for proper performance.
Product Features:
See More
Product Features:
- Ideal replacement – this VVT solenoid is professionally engineered to match the function and performance of the stock part on specific vehicle applications
- Durable construction – this part is made from quality materials to ensure a long service life
- Excellent value – the VVT solenoid is built to perform like original equipment quality at a competitive price
- Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance
Carquest Premium – Camshaft Sensor (Part No.CSC1054)
from
$45.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.
Product Features:
See More
Product Features:
- Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
- Manufactured in an anti-static environment to ensure reliability and stability.
- Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
- Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.
GM Genuine Parts – Fuel Pump O-Ring (Part No.G41)
from
$15.99
GM Genuine Parts Multi Purpose Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Carquest Premium – Engine Oil Level Sensor (Part No.SBC1451)
from
$69.99
The engine lubrication system is critical to engine operation and long life. On some vehicle applications, the engine control module monitors the engine oil level to ensure lubrication is not lost.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
GM Genuine Parts – Timing Chain Tensioner (Part No.12598504)
from
$62.99
ACDelco GM Original Equipment Engine Timing Chain Tensioners help maintain a consistent amount of tension within the timing chain to help reduce the effect that slack has on the valve timing of the engine, and are GM-recommended replacements for your vehicle’s original components. These original equipment tensioners have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Provides consistent tension to help keep engine running in proper time
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Cloyes Gear – CRANKSHAFT SPROCKET (Part No.S1120)
from
$32.99
Since 1921, Cloyes has been the trusted leader in automotive timing systems. As a critical component of the engine’s timing system, the crankshaft sprockets work in unison with the timing chain, tensioners, guides and other sprockets, to ensure precise timing. Cloyes engine timing crankshaft sprockets are precision-tooled with exact tooth geometry and a perfectly matched bore, off-set and timing index for superior fit, reliability, and long-term performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.
Product Features:
See More
Product Features:
- Features precision-tooled tooth form, bore, off-set and timing index for superior fit, reliability, and long-term performance in engine timing repairs
- CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
- Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
- Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
- Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
Cloyes Gear – OIL PUMP SPROCKET (Part No.S1121)
from
$31.99
Since 1921, Cloyes has been the trusted leader in automotive timing systems. In some applications the engine oil pump sprocket can be a critical component or adjacent to the engine’s timing system. Cloyes engine oil pump sprockets are precision-tooled with exact tooth geometry, a perfectly matched bore, and off-set for a superior fit, reliability, and long-term performance. To ensure total system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.
Product Features:
See More
Product Features:
- Features precision-tooled tooth form, bore, and off-set for superior fit, reliability, and long-term performance in engine timing repairs
- CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
- Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
- Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
- Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
Bosch – Pressure Sensor (Part No.0281006076)
from
$61.99
Bosch OE quality pressure sensors for accurate measurements with high durability, fast response time and wide measuring range
Product Features:
See More
Product Features:
- Bosch OE quality pressure sensors for accurate measurements
- Bosch OE quality pressure sensors for long term stability
- Bosch OE quality pressure sensors with a short response time
- Bosch OE quality pressure sensors with improved media resistance
GM Genuine Parts – Engine Valve Cover Gasket (Part No.12649906)
from
$8.59
Engine Valve Cover Gasket
Dorman – Crankshaft Position Sensor (Part No.907-889)
from
$69.99
This engine crankshaft position sensor is designed to match the fit and function of an original sensor to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.
Product Features:
See More
Product Features:
- Direct replacement – this engine crankshaft position sensor is designed to match the fit and function of an original sensor on specified vehicles
- Ideal solution – engineered to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Cloyes Gear – Engine Timing Chain Guide (Part No.9-5548)
from
$11.99
Since 1921, Cloyes has been the trusted leader in automotive timing systems. A timing chain guide serves as a guide (or track) for the timing chain, connecting the crankshaft and camshaft ensuring proper alignment and timing. Cloyes timing chain guides use the latest in design and material technology, ensuring quiet operation, durability that meet or exceed OEM performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.
Product Features:
See More
Product Features:
- CAD designed and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
- Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
- Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
- Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
- Refer to our online catalog for detailed application-specific information
Felpro – Engine Oil Dipstick Tube O-Ring (Part No.73889)
from
$0.99
Engine Oil Dipstick Tube O-Ring
Dorman – Camshaft Phaser – Variable Timing Camshaft Gear (Part No.916-946)
from
$114.99
The variable valve timing sprocket is key to ensuring an engine’s performance and clean running. Replace a worn factory VVT sprocket with this quality engineered sprocket to restore lost performance. Designed to install and perform like the original.
Product Features:
See More
Product Features:
- Direct replacement – this VVT sprocket fits and performs like the original sprocket
- Durable construction – made from durable steel and precision machined for reliable performance
- 100% new – this variable valve timing sprocket is entirely new, not a remanufactured part
- Quality assured – vehicle-specific application has been validation tested to ensure quality
GM Genuine Parts – Intake Air Pressure and Temperature Sensor (Part No.55568175)
from
$68.99
ACDelco GM Original Equipment Multi Purpose Pressure Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.
Product Features:
See More
Product Features:
- Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
- ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Carquest Premium – Air Charge Temperature Sensor (Part No.ECC1177)
from
$59.99
The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Application matched components ensures system operation in like new condition.
Felpro – Engine Oil Pump Pickup Tube Gasket (Part No.73744)
from
$2.29
Product Features:
See More
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Includes all parts needed to complete the repair
Dorman – Engine Timing Cover (Part No.635-430)
from
$169.99
This direct replacement timing cover matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.
Product Features:
See More
Product Features:
- Direct replacement – this engine timing cover matches the fit and function of the original equipment cover
- Durable construction – this part is specifically designed to withstand extreme underhood temperatures for a long service life
- Cost-effective solution – offers original equipment quality at a competitive price
- Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
Dorman – Timing Cover Kit – Includes Gasket (Part No.635-517)
from
$63.99
This direct replacement timing cover matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.
Product Features:
See More
Product Features:
- Direct replacement – this engine timing cover matches the fit and function of the original equipment cover
- Durable construction – this part is specifically designed to withstand extreme under hood temperatures for a long service life
- Cost-effective solution – offers original equipment quality at a competitive price
- Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
Dayco – TIMING CHAIN KIT (Part No.KTC1337)
from
$519.99
With the backing of an industry-leading two year or 60,000 mile parts and labor warranty, each Dayco timing chain kit includes top-grade timing chains, precision machined crank sprockets and cam sprockets, tensioners, high-grade plastic guides, seals and VVT solenoids and cam phasers if the application calls for it.
Product Features:
See More
Product Features:
- High quality chains prevent stretch for the life of the kit, addressing the no. 1 replacement issue
- Precision machined sprockets for exact timing
- High-grade plastic guides use same material as OE for excellent wear resistance
- Contains: Idler Sprocket (2), Crankshaft Sprocket, Timing Chain (3), Chain Tensioner (3), Tensioner Gasket (3), Tensioner Guide (2), Chain Guide (4) Does Not Contain Variable Valve Timing (Variable Valve) Sprocket
Schaeffler – Shaft Seal (Part No.SS3894)
from
$29.49
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
INA US – ENG TIMING CHAIN KIT (Part No.ZC-9-4205SA)
from
$159.99
ENG TIMING CHAIN KIT
Upgrade your 2021 GMC Canyon with Top-Quality Engine Parts
When it comes to maintaining or upgrading your 2021 GMC Canyon, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Engine Parts are key to keeping your Canyon functioning at its best. At Advance Auto Parts, we offer a wide selection of 37 Engine Parts for the 2021 GMC Canyon, designed to meet your needs without breaking the bank.
From
Engine Gaskets and Seal
replacements to
Engine Timing Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2021 GMC Canyon at great prices.
Our Engine Parts inventory for this model
ranges from just $0.99 to $688.99, with
an average price of $79.79.
Our 37 Engine Parts in stock come from 10 trusted brands, so you’re sure to find the right part for your 2021 GMC Canyon without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2021 GMC Canyon is always ready to roll. We’re committed to providing you with everything you need to keep your Canyon in top shape, all in one place.
Start shopping confidently below for your 2021 GMC Canyon!
Best-Selling Engine Gaskets and Seals for 2021 GMC Canyons
Enhance the driving experience in your GMC with 3 quality Engine Gaskets and Seal components, starting at $2.29.
GM Genuine Parts – Fuel Pump O-Ring (Part No.G41)
from
$15.99
GM Genuine Parts Multi Purpose Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Victor Reinz – RTV Silicone (Part No.70-31414-10)
from
$9.99
Product Features:
See More
- Resistant to temperatures from -58 Deg. F to 482 Deg. F, and briefly up to 572 Deg. F (-50 Deg. C to 250 Deg. C, briefly to 300 Deg. C)
- Insignificant shrinkage and loss of mass even in high-heat environments
- Fast-curing, low-odor, noncorrosive (pH neutral, non-acidic, non-oxidizing), and will not harm oxygen sensors
- Sealing gap 0.006 in (0.15 mm)
Felpro – Engine Oil Pump Pickup Tube Gasket (Part No.73744)
from
$2.29
Product Features:
See More
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Includes all parts needed to complete the repair
Most Popular 2021 GMC Canyon Engine Timing Parts
Customize your GMC with 15 Engine Timing Parts products
like Engine Variable Timing Solenoids,
Engine Timing Chain Kits, and
Timing Covers, all
priced under $688.99.
Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVA1358)
from
$64.99
The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.
Product Features:
See More
Product Features:
- Precision-wound coated copper windings increase product durability and life cycle.
- Hard-coated and anodized spool valve to prevent corrosion and increase service life.
- Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
- Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure product reliability, every time.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cloyes Gear – TIMING CHAIN KIT (Part No.9-0951S)
from
$688.99
Since 1921, Cloyes has been the trusted leader in automotive timing systems delivering premium-quality solutions. Cloyes engine timing chain kits are engineered for precision, durability, and optimal engine performance. Kits include all chains, sprockets, tensioners, chain guides, and chain tensioner guides – respective to application and kit selection. To ensure total timing system integrity, Cloyes recommends replacing all engine timing components. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.
Product Features:
See More
Product Features:
- Cloyes chains are pre-stressed and heat-treated. Engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, maintaining accurate timing and delivering long-term durability.
- Sprockets are CAD designed, manufactured using premium material and heat-treated. Featuring precision-tooled tooth form, bore, off-set and timing index for superior fit, reliability, and long-term performance in engine timing repairs.
- Timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain. All are CAD designed and manufactured using premium materials allowing for smooth installation and reliable performance.
- Chain guides serve as a guide (or track) for the timing chain and either apply tension to the system or simply give it a path, connecting crankshaft and camshaft ensuring proper alignment and timing. CAD designed and manufactured using premium materials,
- All timing components designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance.
- Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks.
- Backed by Limited Lifetime Warranty and over 100 years of engineering leadership with unmatched technical support and repair confidence in every kit.
Cloyes Gear – TIMING CHAIN KIT (Part No.9-0951SX)
from
$329.99
Since 1921, Cloyes has been the trusted leader in automotive timing systems delivering premium-quality solutions. Cloyes engine timing chain kits are engineered for precision, durability, and optimal engine performance. Kits include all chains, sprockets, tensioners, chain guides, and chain tensioner guides – respective to application and kit selection. To ensure total timing system integrity, Cloyes recommends replacing all engine timing components. Trusted by professionals for over a century & backed by an industry-leading warranty and technical support.
Product Features:
See More
Product Features:
- Cloyes chains are pre-stressed and heat-treated. Engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise.
- Sprockets are CAD designed, manufactured using premium material and heat-treated. Featuring precision-tooled tooth form, bore, off-set and timing index for superior fit, reliability, and long-term performance in engine timing repairs.
- Timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain. All are CAD designed and manufactured using premium materials allowing for smooth installation and reliable performance.
- Chain guides serve as a guide (or track) for the timing chain and either apply tension to the system or simply give it a path, connecting crankshaft and camshaft ensuring proper alignment and timing.
- All timing components designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance.
- Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks.
- Backed by Limited Warranty and over 100 years of engineering leadership with unmatched technical support and repair confidence in every kit.
Dorman – Engine Timing Cover (Part No.635-430)
from
$169.99
This direct replacement timing cover matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.
Product Features:
See More
Product Features:
- Direct replacement – this engine timing cover matches the fit and function of the original equipment cover
- Durable construction – this part is specifically designed to withstand extreme underhood temperatures for a long service life
- Cost-effective solution – offers original equipment quality at a competitive price
- Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
Dorman – Camshaft Phaser (Part No.916-630)
from
$117.99
The variable valve timing sprocket is key to ensuring an engine’s performance and clean running. Replace a worn factory VVT sprocket with this quality engineered sprocket to restore lost performance. Designed to install and perform like the original.
Product Features:
See More
Product Features:
- Direct replacement – this VVT sprocket fits and performs like the original sprocket
- Durable construction – made from durable steel and precision machined for reliable performance
- 100% new – this variable valve timing sprocket is entirely new, not a remanufactured part
- Quality assured – vehicle-specific application has been validation tested to ensure quality
Dorman – Variable Valve Timing Solenoid (Part No.916-519)
from
$54.99
This replacement engine variable valve timing (VVT) solenoid is precision-engineered to match the fit and function of the original VVT solenoid. Made of quality materials for a long service life, it has been tested for proper performance.
Product Features:
See More
Product Features:
- Ideal replacement – this VVT solenoid is professionally engineered to match the function and performance of the stock part on specific vehicle applications
- Durable construction – this part is made from quality materials to ensure a long service life
- Excellent value – the VVT solenoid is built to perform like original equipment quality at a competitive price
- Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance
Cloyes Gear – TENSIONER GUIDE (Part No.9-6042)
from
$49.99
Since 1921, Cloyes has been the trusted leader in automotive timing systems. A timing chain tensioner guide serves as a guide (or track) for the timing chain and applies tension to the system, connecting crankshaft and camshaft ensuring proper alignment and timing. Cloyes timing chain guides use the latest in design and material technology, ensuring quiet operation, durability and that meet or exceed OEM performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading warranty and technical support.
Product Features:
See More
Product Features:
- CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
- Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
- Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
- Backed by Limited Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
Cloyes Gear – TENSIONER GUIDE (Part No.9-6041)
from
$38.99
Since 1921, Cloyes has been the trusted leader in automotive timing systems. A timing chain tensioner guide serves as a guide (or track) for the timing chain and applies tension to the system, connecting crankshaft and camshaft ensuring proper alignment and timing. Cloyes timing chain guides use the latest in design and material technology, ensuring quiet operation, durability and that meet or exceed OEM performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading warranty and technical support.
Product Features:
See More
Product Features:
- CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
- Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
- Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
- Backed by Limited Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
Cloyes Gear – TIMING CHAIN GUIDE (Part No.9-6043)
from
$38.99
Since 1921, Cloyes has been the trusted leader in automotive timing systems. A timing chain guide serves as a guide (or track) for the timing chain, connecting the crankshaft and camshaft ensuring proper alignment and timing. Cloyes timing chain guides use the latest in design and material technology, ensuring quiet operation, durability that meet or exceed OEM performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading warranty and technical support.
Product Features:
See More
Product Features:
- CAD designed and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
- Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
- Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
- Backed by Limited Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
- Refer to our online catalog for detailed application-specific information
Cloyes Gear – TIMING CHAIN (Part No.C951)
from
$34.99
Product Features:
See More
- Pre-stressed and heat-treated steel construction for increased strength, and wear resistance, delivering long-term durability even in high-stress environments
- Cloyes chains are engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, and maintaining accurate timing
- Designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
- Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
- Available in application-specific kit or as a stand-alone chain, offering installation flexibility and convenience
- Backed by Limited Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
Cloyes Gear – CRANKSHAFT SPROCKET (Part No.S1120)
from
$32.99
Since 1921, Cloyes has been the trusted leader in automotive timing systems. As a critical component of the engine’s timing system, the crankshaft sprockets work in unison with the timing chain, tensioners, guides and other sprockets, to ensure precise timing. Cloyes engine timing crankshaft sprockets are precision-tooled with exact tooth geometry and a perfectly matched bore, off-set and timing index for superior fit, reliability, and long-term performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.
Product Features:
See More
Product Features:
- Features precision-tooled tooth form, bore, off-set and timing index for superior fit, reliability, and long-term performance in engine timing repairs
- CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
- Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
- Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
- Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
Cloyes Gear – CHAIN TENSIONER (Part No.9-6038)
from
$29.99
Since 1921, Cloyes has been the trusted leader in automotive timing systems, delivering premium-quality solutions. A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design and application, Cloyes engine timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain for optimal performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading warranty and technical support.
Product Features:
See More
Product Features:
- CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
- Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
- Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
- Backed by Limited Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
- Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience
Cloyes Gear – TIMING CHAIN GUIDE (Part No.9-6044)
from
$29.99
Since 1921, Cloyes has been the trusted leader in automotive timing systems. A timing chain guide serves as a guide (or track) for the timing chain, connecting the crankshaft and camshaft ensuring proper alignment and timing. Cloyes timing chain guides use the latest in design and material technology, ensuring quiet operation, durability that meet or exceed OEM performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading warranty and technical support.
Product Features:
See More
Product Features:
- CAD designed and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
- Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
- Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
- Backed by Limited Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
- Refer to our online catalog for detailed application-specific information
Cloyes Gear – CHAIN TENSIONER (Part No.9-6039)
from
$28.99
Since 1921, Cloyes has been the trusted leader in automotive timing systems, delivering premium-quality solutions. A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design and application, Cloyes engine timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain for optimal performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading warranty and technical support.
Product Features:
See More
Product Features:
- CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
- Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
- Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
- Backed by Limited Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
- Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience
Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVA1433)
from
$27.99
The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.
Product Features:
See More
Product Features:
- Precision-wound coated copper windings increase product durability and life cycle.
- Hard-coated and anodized spool valve to prevent corrosion and increase service life.
- Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
- Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure product reliability, every time.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Top Picks for 2021 GMC Canyon Camshafts
Upgrade GMC Canyons with top-quality Camshafts parts, including 2 OEM and aftermarket selections for your 2021 model.
Carquest Premium – Engine Camshaft Position Sensor (Part No.CSA4472)
from
$31.99
Carquest Premium camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Engineered with technology that provides increased accuracy with a stronger, more consistent signal
- Sensors are based on proven hall effect and variable reluctance technology
- Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
- O-rings and seals are included if required.
- Weather-tight connectors prevent leaks and corrosion for better reliability.
- Extensive design validation testing and 100% end-of-line tested.
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Carquest Premium – Engine Camshaft Position Sensor (Part No.CSA4077)
from
$24.99
Carquest Premium camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Engineered with technology that provides increased accuracy with a stronger, more consistent signal
- Sensors are based on proven hall effect and variable reluctance technology
- Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
- O-rings and seals are included if required.
- Weather-tight connectors prevent leaks and corrosion for better reliability.
- Extensive design validation testing and 100% end-of-line tested.
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
In-Demand Valve Cover and Cylinder Heads for 2021 GMC Canyons
Select from 2 premium Valve Cover and Cylinder Heads parts for your 2021 GMC Canyon, with prices ranging from $8.59 to $8.89.
GM Genuine Parts – Piston Ring Kit (Part No.12649907)
from
$8.89
Piston Ring Kit
GM Genuine Parts – Engine Valve Cover Gasket (Part No.12649906)
from
$8.59
Engine Valve Cover Gasket
Most Sold 2021 GMC Canyon Engine Mounts
Explore our best-selling GMC parts for the 2021 Canyon among 2 OEM and aftermarket options starting from $117.99.
Anchor – Engine Mount: Front Right, 1 Piece (Part No.3350)
from
$131.99
Anchor 3350 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2015-2021
- Weight approx: 5 Lbs
- Hydraulic
- Reuse Bracket
- Part Group: 3349, 3350
Anchor – Engine Mount: Front Left, 1 Piece (Part No.3349)
from
$117.99
Anchor 3349 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2015-2021
- Weight approx: 5 Lbs
- Hydraulic
- Reuse Bracket
- Part Group: 3349, 3350
FAQs for 2021 GMC Canyon Engine Parts
Which Engine Parts are best-sellers for 2021 GMC Canyons?
Out of 37 Engine Parts that fit 2021 GMC Canyons, the following parts are the top sellers:
- Pressure Sensor (11481379) – $61.99
- Intake Air Pressure and Temperature Sensor (12047849) – $68.99
- Fuel Pump O-Ring (12144240) – $15.99
What’s the price range for 2021 GMC Canyon Engine Parts?
Engine Part prices for the 2021 GMC Canyon start at $0.99 and go up to $688.99 for the most premium parts.
What’s the average price of a Engine Part for a 2021 GMC Canyon?
The average price for Engine Parts for the 2021 GMC Canyon is $79.79. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Engine Parts for other GMC Canyon model years?
What are the cheapest Engine Parts for my 2021 GMC Canyon?
The cheapest 2021 GMC Canyon Engine Parts we carry in stock are:
- Engine Oil Dipstick Tube O-Ring (50251306) – $0.99
- Engine Oil Pump Pickup Tube Gasket (50314220) – $2.29
- Engine Valve Cover Gasket (50221594) – $8.59
- Piston Ring Kit (50221595) – $8.89
- RTV Silicone (12588189) – $9.99
What types of Engine Parts do you sell for my 2021 GMC Canyon?
As of 3/1/26, these are some of the most in-demand types of Engine Parts for a 2021 GMC Canyon:
Can I get help with 2021 GMC Canyon Engine Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Engine Parts and more.
What is your return policy for GMC Canyon Engine Parts?
Advance Auto Parts keeps returns simple. For new GMC Canyon Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
