2021 Ford F-350 Super Duty Exhaust System Kits

Our Black Series performance exhaust systems offer a true murdered-out style without compromising on quality and performance. With fully sealed seams to resist rust you can count on this system to really hold up. The black coat finish is specifically formulated to withstand the extreme heat and abrasive conditions an exhaust system is exposed to.

Product Features:

• Black Series Cat Back System
• Built To Perform, Designed To Maximize Exhaust Flow And Minimize Exhaust Temperatures Your Truck Will Use Less Gas, Last Longer And Perform Better
• Dyno Proven From The Vehicle Specific Muffler Design To The Fully Mandrel Bent Tubing To Minimal Bend Degree Angles, Your System Gets Exhaust Out Fast
• Exhaust System Is The Starting Point To Getting The Most From Cold Air Intakes, Programmers, Modules And Downloaders
• Sound And Style Specifically Tuned To Get The Optimal Sound From Your Ride
• Built To The Most Exacting Standards In The Industry
• Easy To Install, Bolt-On, No Weld Design Makes Installation A No Hassle One And A Half To Two Hour Project

Force II Kit

aFe is proud to introduce the MACH Force-Xp Cat-Back exhaust system. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 4″ mandrel-bent 409 stainless steel tubing and comes complete with free-flowing muffler, OE-style bayonet hangers, band clamps and necessary hardware for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with single gloss black 304 stainless steel, single wall slash cut tip for an aggressive style. Installation is a Snap: This MACH Force-Xp exhaust system use all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• Mandrel Bent Stainless Steel Tubing
• Free Flowing Muffler
• Smooth Curves
• Hassle Free Installation

The MagnaFlow Black Series Filter-Back Performance Exhaust System 17067 17067 brings the dyno-proven performance and deep resonating sound that we’re known for to your 6.4L, 6.7L 2008-2023 Ford in premium kit that includes tailpipe with a premium black powder-coated finish. This Ford exhaust system is designed to produce Mild interior and Moderate exterior sound levels thanks to clever tuning of its fast-flowing mandrel bent 5in. diameter main piping that ends in a Single Passenger Side Rear exit with 6in. Black Coated Welded-On Single Wall Angle Cut Rolled Edge tips. Exhaust kit 17067’s filter-back layout features a direct-fit, easy-to-install design and is made of strong, corrosion-resistant stainless steel. It is produced using CNC precision robotic manufacturing techniques and backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Mandrel Bent Tubing
• 409 Stainless Steel Construction with High Temp Satin Black Coating
• 300 Series Stainless Steel Black Coated Intercooled Tip(s)

MBRPs Pro Series is the best performance exhaust system that money can buy. It is a series designed and built for the serious enthusiast who will settle for nothing less. Constructed from T304 stainless steel it delivers you optimal durability that keeps on looking its best. Easy to clean and maintain this is the product of choice for owners of lifted vehicles, show trucks or who operate in severe environments.

Product Features:

• Constructed From T304 Stainless Steel It Delivers You Optimal Durability That Keeps On Looking Its Best
• Designed To Maximize Exhaust Flow And Minimize Exhaust Temperatures, Use Less Gas, Last Longer And Perform Better
• Dyno Proven: From The Vehicle Specific Muffler Design To The Fully Mandrel Bent Tubing To Minimal Bend Degree Angles, Your System Gets Exhaust Out Fast
• Sound And Style: Specifically Tuned To Get The Optimal Sound From Your Ride
• Built To The Most Exacting Standards In The Industry
• Easy To Clean And Maintain
• Direct Fit To The OEM Hangers
• Easy Installation: Bolt On, No Weld Design Makes Installation A No Hassle One And A Half To Two Hour Project
• Limited Lifetime Warranty

The MagnaFlow Pro Series Filter-Back Performance Exhaust System 17873 17873 utilizes its weight-optimized, durable, corrosion resistant stainless steel design to enhance your 6.4L, 6.7L 2008-2023 Ford with MagnaFlow’s signature sound and dyno-tested performance. 17873’s 4in. diameter mandrel bent main piping features a muffler delete and terminates in a Dual Same Side Behind Passenger Rear Tire exit with 5in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips. This emissions-legal filter-back exhaust kit has been tuned to create Mild interior and Moderate exterior sound levels. Exhaust system 17873 is emissions-legal and produced using CNC precision robotic manufacturing techniques that result in a direct-fit design that you can install yourself, all backed by MagnaFlow’s limited lifetime warranty.

Product Features:

• Throaty, powerful performance sound Magnaflow is famous for
• Attention grabbing design thanks to an aggressive style
• Intercooled tips

The MagnaFlow Pro Series Filter-Back Performance Exhaust System 17872 17872 utilizes its weight-optimized, durable, corrosion resistant stainless steel design to enhance your 6.4L, 6.7L 2008-2023 Ford with MagnaFlow’s signature sound and dyno-tested performance. 17872’s 5in. diameter mandrel bent main piping features a muffler delete and terminates in a Single Passenger Side Rear exit with 6in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips. This emissions-legal filter-back exhaust kit has been tuned to create Mild interior and Moderate exterior sound levels. Exhaust system 17872 is emissions-legal and produced using CNC precision robotic manufacturing techniques that result in a direct-fit design that you can install yourself, all backed by MagnaFlow’s limited lifetime warranty.

Product Features:

• Throaty, powerful performance sound Magnaflow is famous for
• Attention grabbing design thanks to an aggressive style
• Intercooled tips

Our Black Series performance exhaust systems offer a true murdered-out style without compromising on quality and performance. With fully sealed seams to resist rust you can count on this system to really hold up. The black coat finish is specifically formulated to withstand the extreme heat and abrasive conditions an exhaust system is exposed to.

Product Features:

• Black Series Diesel Particulate Filter (DPF) Back System
• Built To Perform With More Pulling Power, Improved Throttle Response And Greater Fuel Efficiency
• Drops Exhaust Gas Temperature By Up To 200 Degree Fahrenheit And Minimizes Backpressure
• From The Spiral Louvered High Flow Muffler To The Fully Mandrel Bent Tubing To Minimal Bend Degree Angles, Gets Exhaust Out Fast
• Specifically Tuned To Get The Optimal Sound From Pickup
• New Stamped Logo On The Tip And Unmistakable Styling
• Everything Is Direct Fit To The OEM Hangers
• Bolt-On, No Weld Design Makes Installation A No Hassle, One And A Half To Two Hour Project