2021 Audi S4 Engine Cooling Parts

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

• OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
• FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
• THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

• 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
• Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
• Brass sensor housing precision machined to meet or exceed OE thermal conductivity
• OE precision matched thermistor position for correct output parameters
• Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

• 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
• Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
• Brass sensor housing precision machined to meet or exceed OE thermal conductivity
• OE precision matched thermistor position for correct output parameters
• Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• Designed to OE standards for ease of installation
• In manufacturing, we custom form the wax pellets for different temperature range specifications. All units are calibrated & tested to confirm switch actuation at their specified temperature
• The switch is designed using a formed bimetallic contact arm. The bimetal contact movement is achieved using the different expansion rates of two metals fused together. This is a creep action device, provides precise performance
• In production, all thermal switches are factory-calibrated to make electrical contact at the specified lower-temperature set point
• Robust design and high grade materials meet the stringent demands of today’s service professional

Bosch liquid temperature sensors accurately monitor the vital fluids in your vehicle ensuring long and healthy life. The sensor provides information to the Engine control Unit to keep your engine running strong, safe, and efficient.

Product Features:

• High durability against operating materials: fuel, oil, water
• Sturdy, vibration-proof design with lasting performance
• Extreme Accuracy under extreme conditions: -40F – +260F

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

• 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
• Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
• Brass sensor housing precision machined to meet or exceed OE thermal conductivity
• OE precision matched thermistor position for correct output parameters
• Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

• OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
• FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
• THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

The product selection from Pierburg Pump Technology covers the complete range of applications for electric water circulation and coolant pumps in the automotive industry. Pierburg has extensive experience in the area of electric water pumps, especially with regard to EC engine technology and hydraulics. The canned motor concept was selected to meet the high requirements for operational reliability and service life. This special motor design has an additional tube placed in the space between the stator and the rotor, which keeps the stator statically sealed with respect to the medium pumped by the running rotor. Since this drive system requires no dynamic sealing elements which are subject to wear (rotating mechanical seals), the water circulation and coolant pumps are especially reliable and free of wear problems. Moreover, the EC motor used in the pumps requires no brushes. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.

Product Features:

• OE Quality, reliability and service life
• Reduction in noise
• Leak-proof sealing of the drive
• Fuel savings and reduced emissions
• Cooling even without operation of the engine
• Water circulation pump can deliver as much as 800 liters per hour
• Coolant pump can deliver more than 9,000 liters per hour

Auxiliary Water Pump

Built to meet the latest OE manufacturer-specified designs, Rein Auxiliary Water Pumps are the best way to make sure you have the proper heat protection for the engine in your vehicle. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.

Product Features:

• OE Quality, reliability and service life
• Leak-proof sealing of the drive
• Fuel savings and reduced emissions
• Cooling even without operation of the engine
• CO²-reduction by optimized efficiency, speed control and reduced weight
• Coverage of a wide hydraulic performance range
• Reduced noise level

This engine auxiliary water pump is designed to match the fit and function of the original pump on specified applications, and is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this engine auxiliary water pump is designed to match the fit and function of the original pump on specified applications
• Restores functionality – reliable replacement for an original pump that has failed to provide sufficient water flow
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

The product selection from Pierburg Pump Technology covers the complete range of applications for electric water circulation and coolant pumps in the automotive industry. Pierburg has extensive experience in the area of electric water pumps, especially with regard to EC engine technology and hydraulics. The canned motor concept was selected to meet the high requirements for operational reliability and service life. This special motor design has an additional tube placed in the space between the stator and the rotor, which keeps the stator statically sealed with respect to the medium pumped by the running rotor. Since this drive system requires no dynamic sealing elements which are subject to wear (rotating mechanical seals), the water circulation and coolant pumps are especially reliable and free of wear problems. Moreover, the EC motor used in the pumps requires no brushes. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.

Product Features:

• OE Quality, reliability and service life
• Reduction in noise
• Leak-proof sealing of the drive
• Fuel savings and reduced emissions
• Cooling even without operation of the engine
• Water circulation pump can deliver as much as 800 liters per hour
• Coolant pump can deliver more than 9,000 liters per hour

Restore your vehicle’s cooling system to proper working order, and minimize the risk of premature failure, by installing a Bosch Auxiliary Water Pump. Bosch Auxiliary Water Pumps are designed to operate in the highly-stressful environment of today’s cooling systems. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.

Product Features:

• OE Quality, reliability and service life
• Leak-proof sealing of the drive
• Fuel savings and reduced emissions
• Cooling even without operation of the engine
• CO²-reduction by optimized efficiency, speed control and reduced weight
• Coverage of a wide hydraulic performance range
• Reduced noise level

This engine auxiliary water pump is designed to match the fit and function of the original pump on specified applications, and is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this engine auxiliary water pump is designed to match the fit and function of the original pump on specified applications
• Restores functionality – reliable replacement for an original pump that has failed to provide sufficient water flow
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Aluminum Core Radiator The Behr replacement radiator guarantees the same quality fit and performance as the OE radiator it replaces. The Behr radiator core is manufactured using high quality anti corrosive aluminum and fiber glass-reinforced polyamide coolant tanks that are highly resistant to cracking and deformation.

Product Features:

• OE-Equivalent
• Direct fit for easy installation.
• High quality corrosion resistant materials.
• OE Style mounting brackets and hose connections.
• Mechanically bonded aluminum core.
• Integrated transmission oil cooler when applicable.

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

• Thermal tested under real-life temperature simulations
• High tensile strength aluminum for maximum crimp strength
• Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
• Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
• Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
• OEM grade, premium fittings for transmission or engine oil coolers (where applicable)

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

• Thermal tested under real-life temperature simulations
• High tensile strength aluminum for maximum crimp strength
• Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
• Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
• Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
• OEM grade, premium fittings for transmission or engine oil coolers (where applicable)

Plastic Tank / Aluminum Core Radiator The Nissens Radiator flat tube and double folded fin design offers a significantly better cooling capacity and provides a stronger exterior resisting impacts from stones. This advanced design helps to prevent damage which would negatively affect the cooling capacity and engine performance.

Product Features:

• OE-Equivalent.
• Direct fit for easy installation.
• OE Style mounting brackets and hose connections.
• Integrated transmission oil cooler when applicable.
• Compact and lightweight.

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

• Thermal tested under real-life temperature simulations
• High tensile strength aluminum for maximum crimp strength
• Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
• Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
• Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
• OEM grade, premium fittings for transmission or engine oil coolers (where applicable)

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

• Thermal tested under real-life temperature simulations
• High tensile strength aluminum for maximum crimp strength
• Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
• Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
• Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
• OEM grade, premium fittings for transmission or engine oil coolers (where applicable)

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

• Thermal tested under real-life temperature simulations
• High tensile strength aluminum for maximum crimp strength
• Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
• Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
• Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
• OEM grade, premium fittings for transmission or engine oil coolers (where applicable)

Oil Drain Plug Gaske