2020 Toyota Sequoia Ignition and Tune-Up Products
More 2020 Toyota Sequoia Ignition and Tune-Up Products Categories
If you’re looking for an original Ignition and Tune-Up Products replacement for a 2020 Toyota Sequoia, you can search through our selection below. You’ll also find aftermarket and OEM Ignition and Tune-Up Products to meet your needs.
Essential 2020 Toyota Sequoia Ignition and Tune-Up Products
Accel – Coil:Cop Toyota (Part No.140630)
from
$103.99
ACCEL Super Coils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct high performance replacements for OEM coils.
Product Features:
See More
Product Features:
- High temp epoxy resists shock and vibration
- Advanced bobbin technology
- Installation usually in less than an hour
- Direct OEM replacement
- OBD II compatible – will not trip a code
Delphi – IGNITION COIL (Part No.GN10311)
from
$78.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.
Product Features:
See More
Product Features:
- Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
- Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
- Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
- We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48991)
from
$78.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience
Product Features:
See More
Product Features:
- OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
- OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
- EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
- THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
- EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
- PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
DENSO – Original Equipment Quality Direct Ignition Coil (Part No.673-1309)
from
$141.99
As the innovator and leader in stick coil technology DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.
Product Features:
See More
Product Features:
- First Time Fit
- Built to DENSO Original Equipment Standards
Nippon Reinz – Spark Plug tube Seal (Part No.A8027168107NRZ)
from
$4.49
Nippon Reinz Spark Plug tube Seal withstands high and low temperatures to provide a reliable seal with minimal tightening. Spark Plug tube Seals are increasingly produced with profiles and not flat; that is, the gasket surface is provided with beads or lips. Now, instead of the entire gasket surface, only the profile needs to be pressed, that is, the sealing bead or sealing lip, and just a slight amount of bolting force produces sufficient deformation and adaptation.
Product Features:
See More
Product Features:
- Stays cool at temperature up to 1800F
- Designed to seal minor surface irregularities
- No re-torque required
- Teflon® coating optional
Felpro – Spark Plug Tube Seal Set (Part No.ES 73110)
from
$21.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
MAHLE Original – Spark Plug Tube Seal (Part No.B31693)
from
$22.99
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- MAHLE gaskets is the leader in Domestic, Asian and European applications
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
Idemitsu – Power Steering Fluid – 12 oz (Part No.30102-052A)
from
$6.29
IDEMITSU Premium PSF is specifically engineered to meet the demanding performance requirements of Honda and Acura power steering units. This advanced technology fluid is formulated with premium quality base oils and the latest additive technologies to provide outstanding protection and performance under the most servere environmental and driving conditions.IDEMITSU Premium PSF can also be used in most Asian Original Equipment Manufacturer (OEM) power steering units that do not utilize electronic power steering technology.
Product Features:
See More
Product Features:
- Unique friction technology provides efficient and noise-free operation
- Advanced formulation technology provides outstanding protection to the entire power steering system while delivering smooth performance under the most severe operating conditions
- Superior low temperature performance for easy flow and protection against cavitation and elimination of “squawking” and “squealing”
- Excellent compatibility with seals, gaskets and internal components to reduce the potential for leaks and ensures smooth performance over extended intervals
- Robust anti-wear and inhibitor chemistry provides enhanced component and fluid durability and long-life
Suncore – Shock Absorber (Part No.12S254090)
from
$24.99
Shock Absorber
Carquest Premium – Ignition Switch (Part No.CSC1595)
from
$88.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Dorman – Ignition Starter Switch (Part No.989-720)
from
$53.99
This replacement ignition switch is a direct replacement for a damaged or worn-out original equipment switch Made of quality materials for durability, this part has been tested to ensure a proper fit.
Product Features:
See More
Product Features:
- Ideal replacement – this ignition switch matches the fit and function of the original equipment switch to restore proper operation to the ignition circuit
- Durable construction – this ignition switch is made of quality materials to ensure reliable performance and a long service life
- Cost-effective solution – offers original equipment performance at competitive price
- Quality tested – this part has undergone try-on testing to ensure a quality fit
Carquest Premium – Ignition Switch (Part No.CSC1805)
from
$48.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Original Equipment – Ignition Switch (Part No.M5050186128OEA)
from
$42.54
Ignition Switch
Encore Automotive – Genuine OE Ignition Knock (Detonation) Sensor (Part No.SKS-J50006)
from
$147.99
Encore Automotive Genuine OE knock sensor detects excessive/unusual pulses caused by the engine ignition and makes proper adjustments to reduce the risk of damaging pistons. Encore Automotive is dedicated to bringing the latest original equipment technologies to the Aftermarket to provide the highest overall value.
Product Features:
See More
Product Features:
- Genuine OE Part
- Highly accurate engine vibration detection
- Excellent material quality
Carquest Premium – Knock Sensor (Part No.SBC3827)
from
$68.99
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
- Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3807)
from
$59.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA4133)
from
$165.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.
Product Features:
See More
Product Features:
- High grade materials that are equal to or better
Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3674)
from
$181.99
MotoRad Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
- Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
Encore Automotive – Genuine OE Ignition Knock (Detonation) Sensor (Part No.SKS-J50008)
from
$119.99
Encore Automotive Genuine OE knock sensor detects excessive/unusual pulses caused by the engine ignition and makes proper adjustments to reduce the risk of damaging pistons. Encore Automotive is dedicated to bringing the latest original equipment technologies to the Aftermarket to provide the highest overall value.
Product Features:
See More
Product Features:
- Genuine OE Part
- Highly accurate engine vibration detection
- Excellent material quality
NTK – Ignition Knock (Detonation) Sensor (Part No.ID0215)
from
$119.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- Reinforced and extra-strength components are used to reduce chance of part failure and prevent corrosion and moisture penetration. Mounting threads match OE for easy, worry free installation.
- NTK’s Ignition Knock Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper ignition timing. This advanced technology is used for durability, drivability and fuel economy.
- The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock, or detonation, to alter the ignition timing and prevent detonation.
Autolite – Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration (Part No.3923)
from
$3.49
Autolite Copper spark plugs deliver quick starts, good fuel economy and smooth acceleration.
Product Features:
See More
Product Features:
- Copper-glass seal bonds insulator, terminal post center electrode together; assures full required voltage at spark gap; gas-tight seal (100% leak proof)
- Multi-rib insulator reduces danger of “flash-over”
- One-piece terminal post adds strength
- Resistor reduces radio frequency interference (RFI) and electrode erosion
DENSO – U-Groove Spark Plug: OE Performance, lasts 30K+ Miles, K20HR-U11 (Part No.3381)
from
$5.49
U-Groove design provides better ignitability for increased engine efficiency.
Product Features:
See More
Product Features:
- Patented U-groove ground electrode design fires leaner mixtures than conventional plugs
- Precision machine-rolled threads reduce seizing and cross-threading in delicate aluminum heads
- Wide range of part numbers for thousands of applications, including classic and collector cars
- Lasts twice as long as most conventional plugs
- 100% pre-fired to assure reliable operation
- U-Groove Conventional
Champion – Copper Plus Spark Plug: Dependable Performance, OE Replacement, REC10YC4 (Part No.975)
from
$2.29
Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
Product Features:
See More
Product Features:
- Copper Plus – Dependable Performance and Durability
- Copper core center electrode allows for accurate control of heat range for longer life
- Superior corrosion resistance
- Built to ISO and SAE standards for proven performance
Autolite Iridium – Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition (Part No.XP5325)
from
$9.99
Our best spark plug! Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, the Autolite Iridium XP spark plugs feature an iridium-enhanced 0.6mm finewire design and patented platinum sidewire technology to provide better overall durability and a more focused ignition for enhanced ignitability and performance. Features double Iridium-enhanced alloy technology center electrode for improved durability and wear resistance.
Product Features:
See More
Product Features:
- 0.6 mm finewire design improves ignitability
- Patented V-trimmed platinum sidewire technology resists wear
- OE equivalent design is engineered for every engine
- Designed for better overall durability with virtually no gap erosion
- Double Iridium-Enhanced Alloy Technology Center Electrode: Offers improved durability and wear resistance for a longer-lasting spark plug.
- Designed and Engineered in the USA: Reflects over 100 years of Autolite’s engineering experience and expertise.
- Gasket Seat Type: Ensures a secure and proper fit for optimal performance.
NGK – Ruthenium HX High Ignitability Spark Plug: DFE Tip Design, FR6AHX-S (Part No.94279)
from
$15.99
NGK Ruthenium HX High Ignitability spark plugs are the best in class plug for todays modern vehicles. Patented Ruthenium technology offers the most advance tip technology and delivers the highest performance and life expectancy. Created from advanced OE t
Product Features:
See More
Product Features:
- HIGH IGNITABILITY DOUBLE FINE ELECTRODE DESIGN: Combines 0.6 millimeter ruthenium center with opposed fine wire platinum ground electrode
- RUTHENIUM ALLOY CENTER ELECTRODE: NGK’s patented ruthenium technology produces maximum performance, ignitability & durability at high temperatures
- PLATINUM PIN TYPE GROUND ELECTRODE: Provides more complete fuel burn, quicker throttle response, smoother idle and better cold starts
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- RECOMMENDED USAGE: Modern vehicles using OE DFE type spark plugs or for those seeking an aftermarket plug with the latest OE technology
NGK – Ruthenium HX High Ignitability Spark Plug: PSPE Tip Design, LKAR8BHX (Part No.91784)
from
$14.79
NGK Ruthenium HX High Ignitability spark plugs are the best in class plug for todays modern vehicles. Patented Ruthenium technology offers the most advance tip technology and delivers the highest performance and life expectancy. Created from advanced OE technology as a high ignitability plug; Ruthenium HX spark plugs come with patented, specialized OEM DFE and PSPE tip designs. NGK Ruthenium HX High Ignitability spark plugs provide a more complete fuel burn resulting in a quicker throttle response, smoother idle and better cold starts. Ruthenium center electrode provides industry leading durability.
Product Features:
See More
Product Features:
- HIGH IGNITABILITY PROJECTED SQUARE PLATINUM ELECTRODE DESIGN: Combines 0.6 millimeter ruthenium center with a unique cut-back PSPE ground electrode
- RUTHENIUM ALLOY CENTER ELECTRODE: NGK’s patented ruthenium technology produces maximum performance, ignitability & durability at high temperatures
- PSPE DESIGN: Projected square platinum electrode shape of the ground electrode provides the best ignitability and service life for high heat engines
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- RECOMMENDED USAGE: Modern vehicles using OE PSPE type spark plugs or for those seeking an aftermarket plug with the latest OE technology
- Enhanced Fuel Burn: Provides a more complete fuel burn, resulting in quicker throttle response, smoother idle, and better cold starts.
- Industry-Leading Durability: Ruthenium center electrode ensures exceptional durability and longevity.
Autolite – Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration (Part No.5325)
from
$3.49
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Guaranteed to deliver quick starts, good fuel economy and smooth acceleration, Autolite Copper Core spark plugs are designed to meet or exceed OES design requirements. Consider upgrading to Autolite Platinum, Double Platinum or Iridium XP plugs for improved engine performance. Copper core plugs are the industry standard.
Product Features:
See More
Product Features:
- Copper-glass seal bonds insulator, terminal post center electrode together; assures full required voltage at spark gap; gas-tight seal (100% leak proof)
- Multi-rib insulator reduces danger of “flash-over”
- One-piece terminal post adds strength
- Resistor reduces radio frequency interference (RFI) and electrode erosion
- Quick Starts: Autolite Copper Core spark plugs are engineered to ensure your engine starts quickly and reliably every time.
- Good Fuel Economy: Designed to optimize fuel efficiency, these spark plugs help you get the most out of every gallon of gas.
- Smooth Acceleration: Experience seamless and smooth acceleration with Autolite Copper Core spark plugs, enhancing your driving experience.
- OES Design Compliance: These spark plugs are crafted to meet or exceed Original Equipment Service (OES) design requirements, ensuring high-quality performance.
- Industry Standard: Autolite Copper Core spark plugs are recognized as the industry standard, backed by over 100 years of engineering expertise and the sale of over 11 billion plugs.
ACDelco – Rapidfire Spark Plug (Part No.21)
from
$5.99
ACDelco Gold (Professional) RAPIDFIRE Spark Plugs are a high quality alternative to Original Equipment (OE) parts. These RAPIDFIRE Single Platinum Performance Spark Plugs are designed for everyday use and are a high quality replacement for many vehicles on the road today. These premium aftermarket spark plugs have high-quality suppressors that help prevent misfiring, an improved plug to boot seal, and a pure copper core for greater durability. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.
Product Features:
See More
Product Features:
- Solid state suppressor, with two-piece glass and brass seal, can help reduce radio frequency interference, regulates spark energy for long electrode life, and helps protect against high combustion pressures
- Pure copper core provides great heat transfer and helps maximize plug durability
- Platinum on center electrode enables superior spark characteristics and can reduce voltage requirements of the ignition system
- Ribless insulator helps optimize plug to boot sea
- Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
- Premium aftermarket replacement part
- Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Popular 2020 Toyota Sequoia Ignition and Tune-Up Products Categories
2020 Toyota Sequoia Ignition and Tune-Up Products
You count on your 2020 Toyota Sequoia to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 30 Ignition and Tune-Up Products ranging in price from $2.29 to $326.99, you’re sure to find everything you need for your 2020 Toyota Sequoia.
Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 13 different brands like Autolite, DENSO, and NGK. 2020 Toyota Sequoia Ignition and Tune-Up Products start as low as $2.29!
One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 2,280 extensive product reviews on 2020 Toyota Sequoia Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IKH20 with 4.7 stars and Original Equipment Quality Direct Ignition Coil with 4.8 stars.
Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 2020 Toyota Sequoia below to get started!
Top-Rated Ignition and Tune-Up Products Brands For Your 2020 Toyota Sequoia
Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2020 Toyota Sequoia running right for years to come. In our inventory you’ll find brands like Autolite, DENSO, NGK, and even more.
Popular Champion Ignition and Tune-Up Products
You’ll find popular Champion brand products across Spark Plugs. All are waiting to get your 2020 Toyota Sequoia back on the road. Some of the top-rated Champion products in these categories are:
from
$7.99
(2)
Double Platinum & Power Spark Plug Exceptional Perf OE Replacement REC10PYPB4
Spark Plugs
Top-Rated Autolite Ignition and Tune-Up Products
If Autolite are what you’re looking for, our inventory holds plenty. We stock Autolite brand Ignition and Tune-Up Products for your 2020 Toyota Sequoia, and some of our most reviewed Autolite parts include:
from
$9.99
(166)
Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition
Spark Plugs
from
$4.79
(131)
Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration
Spark Plugs
from
$6.79
(87)
Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life
Spark Plugs
FAQs for 2020 Toyota Sequoia Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the 2020 Toyota Sequoia?
Out of 30 Ignition and Tune-Up Products for the 2020 Toyota Sequoia, the most popular in our inventory are:
from
$11.49
(104)
Iridium Long-Life Spark Plug: OE Performance, last 100K+ Miles, SK20HR11
Spark Plugs
What are the top-rated 2020 Toyota Sequoia Ignition and Tune-Up Products?
Top-rated Ignition and Tune-Up Products for your 2020 Toyota Sequoia based on customer reviews/ratings are:
from
$12.29
(76)
Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IKH20
“Best plugs I used and already pre gaped
Awesome”
from
$141.99
(18)
Original Equipment Quality Direct Ignition Coil
“I had a misfire in cylinder 5, read the codes and it was a failing coil. Decided to replace all coils and plugs. This was on a 2009 RX350, be sure to ”
from
$10.99
(16)
Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, IKH20TT
“Vehicle”
