2020 Ram 3500 Performance and Racing Products
Find Your Specific 2020 Ram 3500 Performance and Racing Products
Below you will find various in-demand Ram Performance and Racing Products, components and accessories for your 2020 3500. Advance Auto Parts has popular 3500 parts like Programmers, Performance Ignition Products, Nitrous and CO2 Systems and more. You’ll also find aftermarket and OEM Performance and Racing Products for other 3500 model years including
2012,
2013,
2014,
2015,
2016,
2017,
2018,
2019,
2021 and more. Select a category of 2020 Ram 3500 Performance and Racing Products below and start saving instantly.
Popular 2020 Ram 3500 Performance and Racing Products Categories
Essential Performance and Racing Products for 2020 Ram 3500s
Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9934)
from
$199.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- WILL NOT VOID VEHICLE WARRANTY
K&N – NextGen Cold Air Intake: Adds Up To 17.6 Horsepower, With Washable Air Filter (Part No.50-1561)
from
$425.99
This K&N NextGen cold air intake system is engineered for your DODGE/RAM 1500 V8-5.7L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 43.2 percent to your engine and provides an increase of 17.62 horsepower and 28.50 torque with no tune required. This intake system is paired with a washable, reusable High-Flow lifetime Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Dyno-Proven Performance – Dyno-proven to deliver a guaranteed increase in horsepower and torque on your engine’s stock tune. Experience the exciting roar of your engine during acceleration, without any drone at cruising speeds.
- NextGen Airbox – The hybrid airbox features a semi-enclosed airbox that helps lower air temperatures, an enlarged fresh air inlet for improved airflow, and better protection against contaminants.
- Oversized Air Filter – An oversized air filter features an increased surface area and a radius-entry design, both engineered to increase airflow and enhance performance.
- Large-Diameter Tube – The large-diameter, CAD-designed intake tube features strategically positioned air channels that increase airflow, boosting airspeed and delivering more air to your engine for added performance.
- Precision Engineering – Each NextGen intake is precisely engineered for your vehicle, enhancing the style of your engine bay while increasing horsepower, torque, and airflow.
- Simplified Installation – The simplified design reduces mounting hardware, while Quick-Lock technology allows the filter to snap into place. A sealing bead secures the system with just one hose clamp.
- 50 plus Years of Trusted Protection – Since 1969, K&N filters have delivered superior filtration, extended cleaning intervals, and proven performance, trusted by racers and enthusiasts alike.
- Warranty – K&N NextGen intakes come with a No-Hassle Limited Warranty, preserving your factory warranty. Designed and engineered in the USA since 1969, K&N provides dedicated, USA-based customer service.
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 14 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-12032)
from
$454.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Product Features:
See More
Product Features:
- Uses Pro 5R Filter For Maximum Air Flow
- Rotomolded Plastic Tube For Maximum Air Flow
- 59% cfm Flow Gain
- Improved Throttle Response
aFe POWER – Momentum GT Cold Air Intake: Gain up to 15 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-72104)
from
$454.99
Unique One-Piece High Quality Housing W/ Sight Window: A custom CAD designed roto-molded housing made from heat resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the airbox. The roto-molded housing is made out of black cross-linked polyethylene. Carbon Fiber Accent are provided for car show quality and to further distinguish your vehicle from others. High Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Also included is a high quality billet aluminum crankcase fitting and temp sensor fitting for easy installation. Huge 3-Layer Performance Air Filter: The Momentum GT intake is designed around an oil-free, large 8″ round 360 degree radial flow performance air filter with 3-layers of progressive finer porosity synthetic media providing maximum convenience. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. The air filter is wrapped in reinforced metal providing maximum strength to prevent filter collapse. Premium Hardware: Premium stainless steel T-bolt clamps and a silicone double hump coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation. NOTE; This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles
Product Features:
See More
Product Features:
- Outflows Factory Intake By 25%
- 1-Pc. Sealed Housing w/Carbon Fiber Accents/Aux Air Inlet
- CAD-Designed Roto-Molded Intake Tube w/Resonance Chamber
- Built In Sight Window Provides Easy Inspection Of Filter
K&N – Cold Air Intake: Adds Up To 10 Horsepower, With Million Mile Air Filter (Part No.77-1561KP)
from
$472.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
MSD Ignition – Coil; 5.7/6.1L HEMI; 05-14; Single (Part No.8255)
from
$112.99
Fire up your late model hemi with a set of MSD’s blaster coils. The coils are a direct bolt-in and are spec’d with superior materials and winding ratios to improve the output of the coil while retaining the factory fit.
Product Features:
See More
Product Features:
- Improved High RPM Operation
- Patented Winding Design and Materials
- Direct Bolt-In to Factory Connectors
- Secondary Current (mA): 56 mA
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-1017)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N’s Limited Warranty.
Product Features:
See More
Product Features:
- Designed to allow high flow rates and a consistent flow of oil to your engine
- Pleated synthetic-blend filtration media removes most harmful contaminants
- Fast and easy Wrench-Off removal using the welded one-inch hex nut
- High capacity to withstand the service intervals recommended by vehicle manufacturers
- Heavy-duty canister for outstanding durability
- Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
- Designed to operate with all synthetic, conventional, and blended motor oils
- Limited Warranty
Product Features:
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2010)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Bully Dog – 50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics (Part No.40410)
from
$399.99
The GT Platinum Gas is four products in one; a vehicle engine tuner, monitor, gauge and diagnostic device all in a single unit. The GT dramatically improves the utility of your vehicle by increasing horsepower, improving fuel economy and providing a comprehensive set of monitoring features and diagnostic functions. This product is incomparable to other tuning products because it has the largest feature set and the widest range of vehicle applications from a single product part number.
Product Features:
See More
Product Features:
- HEADS UP DISPLAY – Monitor over 15 performance parameters at a glance with a dynamic LCD display mounted on a pillar, window, or dash. User set daytime and nighttime driving modes
- MULTIPLE PRELOADED TUNES – Access four preloaded tunes with the touch of a few buttons to maximize performance in any situation.
- CODE CLEARING – Diagnose and clear trouble codes to ensure proper engine operation.
- Reads and Erases Diagnostic Trouble Codes
- Display Over 15 Vehicle Parameters
- Installation Is Easy-10-20 Minutes
- Free Internet Updates And Upgrades
- 30 Day Money Back Guarantee
Accel – Handheld Computer Programmer for Enhanced Performance and Tuning Control (Part No.49505)
from
$425.99
Revolutionary handheld tuner quickly and easily reprograms your vehicle for more power across the entire rpm range! 50 State Legal!
Product Features:
See More
Product Features:
- Average gains in excess of 30 HP/40 ft.-lbs. for gas and 80 HP/150 ft.-lbs. diesel*
- HD 2.8¿ color screen with updated interface for easier and faster modifications
- HD 2.8┐ color screen with updated interface for easier and faster modifications
- Increased memory and faster processor for improved tuning plus faster updating
- Active fuel management control*
- Performance test (0-60, ╝ mile testing)
- Performance test (0-60, ¼ mile testing)
- Internet updating using PC software
- Tire size adjustment
- Axle gear ratio adjustment
- Shift point and firmness adjustment*
- Speed and rev limiter adjustments*
- Carb EO # D-745
- Diagnostic capability ¿ read and clear trouble codes with explanation of codes
- Diagnostic capability ┐ read and clear trouble codes with explanation of codes
Hypertech – Speedometer Calibrator Color Dodge: Recalibrate your speedometer to account for changes to tire size (Part No.3400)
from
$239.99
If you’ve installed tires that are larger or smaller than original equipment tires, or if you have installed a ring and pinion gear set with a different rear gear ratio, the Max Energy Spectrum allows you to re-program for correct speedometer readings, as well as correct part-throttle shifting. The vehicle’s computer calculates your vehicle’s speed based on the diameter of the stock tires. If you’ve installed taller or shorter tires, or changed the rear gear ratio, the vehicle’s computer doesn’t know how fast your vehicle is going. As a result, the automatic transmission may not shift correctly and the speedometer readings will not be accurate (as required by law).
Product Features:
See More
Product Features:
- Speedometer correction for multiple tire sizes
- Return back to factory settings
- Reads/Displays/Clears Diagnostic Trouble Codes (DTC’s)
- Internet updateable
- Product might not be available in all states due to local laws.
NOS/Nitrous Oxide Systems – Diesel; Nitrous System (Part No.02519NOS)
from
$1049.99
If you think the torque of that monster diesel is something to brag about then you should feel it with the extra power of NOS. This kit works with stock and modified applications. Vehicles with computer upgrades will benefit even more as nitrous will aid in a clean combustion. Comes complete with 10 pound bottle, bottle brackets, nitrous feed line, large nitrous solenoid, electrical wiring and complete instructions.
Product Features:
See More
Product Features:
- Provides Additional Air Your Diesel Wants
- Additional 50 HP
- w/No Fuel System Or Electronic Upgrades
- Complete Kit For Easy Installation
Upgrade your 2020 Ram 3500 with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 2020 Ram 3500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ram or enhancing its overall performance, Performance and Racing Products are key to keeping your 3500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 5 Performance and Racing Products for the 2020 Ram 3500, designed to meet your needs without breaking the bank.
From
Programmer
replacements to
Performance Ignition Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2020 Ram 3500 at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $17.99 to $1,049.99, with
an average price of $397.77.
Our 5 Performance and Racing Products in stock come from 4 trusted brands, so you’re sure to find the right part for your 2020 Ram 3500 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2020 Ram 3500, we stock popular OEM and aftermarket Performance and Racing Products from top names
like K&N, and more.
K&N Performance and Racing Products
start at just $17.99 and boast an impressive 4.8 stars average rating from customers.
With 1,330 customer reviews and counting, our 2020 Ram 3500 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2020 Ram 3500 is always ready to roll. We’re committed to providing you with everything you need to keep your 3500 in top shape, all in one place.
Start shopping confidently below for your 2020 Ram 3500!
Best-Selling Programmers for 2020 Ram 3500s
Enhance the driving experience in your Ram with 1 quality Programmer components, starting at $239.99.
Hypertech – Speedometer Calibrator Color Dodge: Recalibrate your speedometer to account for changes to tire size (Part No.3400)
from
$239.99
If you’ve installed tires that are larger or smaller than original equipment tires, or if you have installed a ring and pinion gear set with a different rear gear ratio, the Max Energy Spectrum allows you to re-program for correct speedometer readings, as well as correct part-throttle shifting. The vehicle’s computer calculates your vehicle’s speed based on the diameter of the stock tires. If you’ve installed taller or shorter tires, or changed the rear gear ratio, the vehicle’s computer doesn’t know how fast your vehicle is going. As a result, the automatic transmission may not shift correctly and the speedometer readings will not be accurate (as required by law).
Product Features:
See More
Product Features:
- Speedometer correction for multiple tire sizes
- Return back to factory settings
- Reads/Displays/Clears Diagnostic Trouble Codes (DTC’s)
- Internet updateable
- Product might not be available in all states due to local laws.
Most Popular 2020 Ram 3500 Performance Ignition Products
Customize your Ram with 1 Performance Ignition Products products
like Performance Coils, all
priced under $112.99.
MSD Ignition – Coil; 5.7/6.1L HEMI; 05-14; Single (Part No.8255)
from
$112.99
Fire up your late model hemi with a set of MSD’s blaster coils. The coils are a direct bolt-in and are spec’d with superior materials and winding ratios to improve the output of the coil while retaining the factory fit.
Product Features:
See More
Product Features:
- Improved High RPM Operation
- Patented Winding Design and Materials
- Direct Bolt-In to Factory Connectors
- Secondary Current (mA): 56 mA
Top Picks for 2020 Ram 3500 Nitrous and CO2 Systems
Upgrade Ram 3500s with top-quality Nitrous and CO2 Systems parts, including 1 OEM and aftermarket selections for your 2020 model.
NOS/Nitrous Oxide Systems – Diesel; Nitrous System (Part No.02519NOS)
from
$1049.99
If you think the torque of that monster diesel is something to brag about then you should feel it with the extra power of NOS. This kit works with stock and modified applications. Vehicles with computer upgrades will benefit even more as nitrous will aid in a clean combustion. Comes complete with 10 pound bottle, bottle brackets, nitrous feed line, large nitrous solenoid, electrical wiring and complete instructions.
Product Features:
See More
Product Features:
- Provides Additional Air Your Diesel Wants
- Additional 50 HP
- w/No Fuel System Or Electronic Upgrades
- Complete Kit For Easy Installation
In-Demand Performance Air Intake Kits for 2020 Ram 3500s
Select from 1 premium Performance Air Intake Kits parts for your 2020 Ram 3500.
K&N – AIR INTAKE SYSTEM (Part No.63-1583)
from
$419.99
AIR INTAKE SYSTEM
Most Sold 2020 Ram 3500 Performance Oil Filters
Explore our best-selling Ram parts for the 2020 3500 among 1 OEM and aftermarket options starting from $17.99.
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-1017)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N’s Limited Warranty.
Product Features:
See More
Product Features:
- Designed to allow high flow rates and a consistent flow of oil to your engine
- Pleated synthetic-blend filtration media removes most harmful contaminants
- Fast and easy Wrench-Off removal using the welded one-inch hex nut
- High capacity to withstand the service intervals recommended by vehicle manufacturers
- Heavy-duty canister for outstanding durability
- Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
- Designed to operate with all synthetic, conventional, and blended motor oils
- Limited Warranty
Top-Rated Performance and Racing Products Brands For Your 2020 Ram 3500
Shop for the best-rated brands offering Performance and Racing Products and other products for your 2020 Ram 3500s. Below you’ll find some of our best rated Performance and Racing Products from K&N, and more. Performance and Racing Products from these brands that fit a 2020 3500 start at just $17.99 and are rated as high as 4.8 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular K&N 2020 Ram 3500 Performance and Racing Products
When it comes to maintaining or upgrading your 2020 Ram 3500, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 2020 Ram 3500. With over 1 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.99. Plus, with over 133 customer reviews and an average rating of 4.8 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$17.99
(133)
Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine
“Solid filter”
FAQs for 2020 Ram 3500 Performance and Racing Products
Which Performance and Racing Products are best-sellers for 2020 Ram 3500s?
Out of 5 Performance and Racing Products that fit 2020 Ram 3500s, the following parts are the top sellers:
- Speedometer Calibrator Color Dodge: Recalibrate your speedometer to account for changes to tire size (12452412) – $239.99
- AIR INTAKE SYSTEM (50220770) – $419.99
- Coil; 5.7/6.1L HEMI; 05-14; Single (10211638) – $112.99
What’s the price range for 2020 Ram 3500 Performance and Racing Products?
Performance and Racing Product prices for the 2020 Ram 3500 start at $17.99 and go up to $1,049.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 2020 Ram 3500?
The average price for Performance and Racing Products for the 2020 Ram 3500 is $397.77. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Ram 3500 model years?
What are the cheapest Performance and Racing Products for my 2020 Ram 3500?
The cheapest 2020 Ram 3500 Performance and Racing Products we carry in stock are:
- Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (16400033) – $17.99
- Coil; 5.7/6.1L HEMI; 05-14; Single (10211638) – $112.99
- Speedometer Calibrator Color Dodge: Recalibrate your speedometer to account for changes to tire size (12452412) – $239.99
- AIR INTAKE SYSTEM (50220770) – $419.99
- Diesel; Nitrous System (22310962) – $1,049.99
What are the top-rated Performance and Racing Products that fit the 2020 Ram 3500?
Out of 1,330 reviews by customers, our 2020 Ram 3500 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2020 Ram 3500 and their top-rated products:
- Performance Oil Filters
What types of Performance and Racing Products do you sell for my 2020 Ram 3500?
As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 2020 Ram 3500:
Can I get help with 2020 Ram 3500 Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ram Performance and Racing Products and more.
What is your return policy for Ram 3500 Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Ram 3500 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
