2020 Nissan Pathfinder Air Conditioning Parts
More 2020 Nissan Pathfinder Air Conditioning Parts
Find your specific 2020 Nissan Pathfinder original or aftermarket Air Conditioning Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2020 Nissan Pathfinder Air Conditioning Parts
Santech – A/C Pressure Switch (Part No.R1054409646SII)
from
$61.86
A/C Pressure Switch
Santech – A/C Pressure Switch (Part No.R1054262787SII)
from
$42.93
A/C Pressure Switch
Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.CCA1033)
from
$49.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – AC Pressure Sensor (Part No.ABA1011)
from
$114.99
The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.
Product Features:
See More
Product Features:
- Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
- Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
- All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
- All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
Carquest Premium – A/C Condenser (Part No.6456)
from
$177.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.
Product Features:
See More
Product Features:
- This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
- The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
- Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
- Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
- All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
- We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
- Our condensers are manufactured from rigid design standards to fit OEM dimensions.
- Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
- Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges. The package passes the fre
- Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to ensure the highest quality standards from beginning to finished product.
- All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
- We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak. This industry leading process is the most precise method and can detect even the smallest leak. The leak-free condenser is then charged with nitrogen a
- Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
- Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
- vibration testing
- blast testing
- and salt spray testing to simulate real world conditions.
KAI – A/C Condenser (Part No.CNDDPI3331)
from
$135.99
New Platinum Pro A/C Condenser, With Receiver Drier
Product Features:
See More
Product Features:
- With Receiver Drier, Made Of Aluminum
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – A/C Condenser (Part No.CND4201)
from
$119.99
New Platinum Pro A/C Condenser, 2.5/3.5 Liter Engines
Product Features:
See More
Product Features:
- 2.5/3.5 Liter Engines, Made Of Aluminum
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – A/C Condenser (Part No.CND38242)
from
$124.99
New Platinum Pro A/C Condenser, 2.4/3.0 Liter Engines
Product Features:
See More
Product Features:
- 2.4/3.0 Liter Engines, Made Of Aluminum
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – A/C Condenser (Part No.CNDDPI3109)
from
$114.99
New Platinum Pro A/C Condenser, With Sensor Port, With Receiver Drier
Product Features:
See More
Product Features:
- With Sensor Port, With Receiver Drier, Made Of Aluminum
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Koyo Cooling – A/C Condenser (Part No.R10303311313KCS)
from
$214.18
A/C Condenser
Santech – A/C Expansion Valve (Part No.R1045397618SII)
from
$36.96
A/C Expansion Valve
Carquest Premium – A/C Block Expansion Valve (Part No.T39450)
from
$25.49
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
Santech – A/C Expansion Valve (Part No.R1045513266SII)
from
$64.12
A/C Expansion Valve
Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T39117)
from
$43.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T39058)
from
$42.49
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
- O-Rings necessary for installation are included.
Carquest Premium – A/C Block Expansion Valve (Part No.T39426)
from
$29.49
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
Carquest Premium – A/C New; w/ Clutch; w/ DCS171C Compressor (Part No.T68667)
from
$441.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
- New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
- The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
- All new compressors must pass a helium leak test and pump up function test prior to packaging.
- O-Rings and gaskets necessary for installation are included.
- Low Friction Hinge Bearing Mechanism.
- High efficiency Low Mass Hollow Piston.
KAI – A/C Compressor, Dks17D, 7 Groove (Part No.ACP010668)
from
$424.99
New Standard Replacement A/C Compressor, DKS17D, 7 Groove
Product Features:
See More
Product Features:
- DKS17D, 7 Groove
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – A/C New; w/ Clutch; w/ DKS17D Compressor (Part No.T9208913)
from
$412.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
- New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
- The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
- All new compressors must pass a helium leak test and pump up function test prior to packaging.
- O-Rings and gaskets necessary for installation are included.
- Matched high-quality needle-roller bearing ensures low friction and high load capability.
- Light weight aluminum energy-saving casting used for construction.
DENSO – New Compressor With Clutch (Part No.471-5013)
from
$425.99
As one of the world+s largest OE suppliers of A/C compressors DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO+s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.
Product Features:
See More
Product Features:
- DENSO is the world’s largest OE supplier of A/C compressors
- Each compressor is precision manufactured for exact replacement
- Designed for high output and extended durability
- Highest quality in the Aftermarket
Carquest Premium – New Compressor with Clutch (Part No.T68641)
from
$613.99
CARQUEST New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. CARQUEST New Compressors are designed to pump the air conditioning refrigerant through the air conditioning system to provide exceptional climate control for the passenger compartment.
Product Features:
See More
Product Features:
- New, with Clutch, with DKS17D Compressor
- Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
- New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
- The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
- All new compressors must pass a helium leak test and pump up function test prior to packaging.
- O-Rings and gaskets necessary for installation are included.
KAI – A/C Compressor, Dks17D, 7 Groove (Part No.ACP010658)
from
$459.99
New Standard Replacement A/C Compressor, DKS17D, 7 Groove
Product Features:
See More
Product Features:
- DKS17D, 7 Groove
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – A/C Compressor, Dks17D, 7 Groove (Part No.ACP012434)
from
$474.99
New Standard Replacement A/C Compressor, DKS17D, 7 Groove
Product Features:
See More
Product Features:
- DKS17D, 7 Groove
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Standard – A/C Remanufactured; w/ Clutch; w/ DKS17D Compressor (Part No.DW67671)
from
$339.99
Carquest Standard Remanufactured Compressors are manufactured to meet original equipment specifications. All components are either remanufactured to strict standards or are replaced with new components to ensure performance and durability. All compressors are 100% end of line tested.
Product Features:
See More
Product Features:
- O-Rings and gaskets necessary for installation are included.
- All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
- All units have new seals, O-rings, gaskets and clutch bearings
- Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
Autopart International Inc – A/C Compressor (Part No.R10003198898API)
from
$369.04
A/C Compressor
Carquest Standard – Reman Calsonic CWV618 Compressor w/ Clutch (Part No.DW67435)
from
$333.99
Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.
Product Features:
See More
Product Features:
- Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
- All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
- All units have new seals, O-rings, gaskets and clutch bearings
- Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
Carquest Standard – Reman Calsonic/Zexel DCS-171C Compressor w/ Clutch (Part No.DW167667)
from
$156.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Carquest.
Product Features:
See More
Product Features:
- Remanufactured compressors are 100 percent tested to ensure compressor function and noise level meets or exceeds OE specifications
- Remanufactured compressors come pre-charged with 3 ounces of PAG oil for R134a or R1234yf applications
- Remanufactured compressors are individually vacuum and pressure tested to ensure no leaks
- Remanufactured compressors come with the R12/R134A/1234yf required O-rings /sealing washers to install the compressor
- Remanufactured Compressors are built in a ISO9001:2015 Certified facility to ensure consistent quality standards in the Re-manufacturing process
- Remanufactured compressors are 100 percent tested to ensure compressor function and noise level meets or exceeds OE specifications
- Remanufactured compressors come pre-charged with 3 ounces of PAG oil for R134a or R1234yf applications
- Remanufactured compressors are individually vacuum and pressure tested to ensure no leaks
- Remanufactured compressors come with the R12/R134A/1234yf required O-rings /sealing washers to install the compressor
- Remanufactured Compressors are built in a ISO9001:2015 Certified facility to ensure consistent quality standards in the Re-manufacturing process
Carquest Premium – A/C New; w/ Clutch; w/ CWV618 Compressor (Part No.T68427)
from
$479.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
- New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
- The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
- All new compressors must pass a helium leak test and pump up function test prior to packaging.
- O-Rings and gaskets necessary for installation are included.
- O-Rings and gaskets necessary for installation are included.
Popular 2020 Nissan Pathfinder Air Conditioning Parts Categories
2020 Nissan Pathfinder Air Conditioning Parts
Maybe you’re in the middle of a full rebuild of that 2020 Nissan Pathfinder. Maybe you just need a couple of Air Conditioning Parts. Either way, Advance Auto Parts has 10 different Air Conditioning Parts in our inventory ranging from $25.49 to $441.99. That means you can find the exact parts or products you need to keep that 2020 Nissan Pathfinder running smoothly.
Air Conditioning Parts are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 2020 Nissan Pathfinder. Carquest Premium, Santech, and KAI are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Air Conditioning Parts for your 2020 Nissan Pathfinder, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Air Conditioning Parts to keep your 2020 Nissan Pathfinder rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Air Conditioning Parts Brands To Make Your 2020 Nissan Pathfinder Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2020 Nissan Pathfinder demands trusted brand parts and products to keep it running. Many trusted brands of Air Conditioning Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Pathfinder the best it can be. Be sure to browse some of our top Air Conditioning Parts brands and parts.
Popular Carquest Premium Air Conditioning Parts
We carry Carquest Premium parts in our stock across AC Compressor With Clutch categories, plus more. For a 2020 Nissan Pathfinder, our most popular Carquest Premium Air Conditioning Parts include:
FAQs for 2020 Nissan Pathfinder Air Conditioning Parts
What are the most purchased Air Conditioning Parts for the 2020 Nissan Pathfinder?
Out of 10 Air Conditioning Parts for the 2020 Nissan Pathfinder, the most popular in our inventory are:
