2020 Nissan Murano Power Steering Parts
More 2020 Nissan Murano Power Steering Parts
Find your specific 2020 Nissan Murano original or aftermarket Power Steering Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2020 Nissan Murano Power Steering Parts
Maval – Complete Steering Rack, Remanufactured (Part No.M1000939552MAV)
from
$617.87
Maval Manufacturing is a Global leader in the production of remanufactured steering racks that meet or exceed the OE requirements set by the vehicle manufacturers. Maval uses only the highest quality OE parts in the remanufacturing process and each unit goes through a comprehensive inspection process that must meet OE performance specifications.
Product Features:
See More
Product Features:
- OE quality and direct fit replacement
- Remanufacture based on highest quality standards
- Computerized tests insure that all products meet the OE performance specification.
- Performance and quality approvals from OE steering gear and pump manufacturers world wide
Cardone New – Rack and Pinion Assembly (Part No.97-3049)
from
$877.99
CARDONE Engineered Technology ensures that all CARDONE New Rack and Pinion units meet or exceed O.E.M. performance. Based on over 50 years of reverse-engineering expertise, original design weaknesses are identified and improved, resulting in premium-quality, brand-new parts you can rely on. All units adhere to strict S.A.E. specifications and are tested to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- Environmentally-friendly coating applied to tie rods and lines to provide a clean appearance and prevent rust.
- Performance testing ensures perfect fit, function and reliable performance.
- Computerized spool valve balancing ensures exceptional steering feel.
- Supplied with O.E.M. grade seals, O-rings and boots to provide optimal sealing performance and longevity.
- Built to meet or exceed O.E.M. performance.
Cardone – Rack and Pinion Assembly (Part No.26-3082)
from
$492.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Cardone – Rack and Pinion Assembly (Part No.26-3028)
from
$588.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Cardone – Rack and Pinion Assembly (Part No.26-3036)
from
$408.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Cardone – Rack and Pinion Assembly (Part No.26-30020)
from
$775.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Cardone – Power Rack and Pinion (Complete) – New (Part No.M1000865254CAR)
from
$1407.27
CARDONE Select Engineered (CSE) Technology ensures that all CARDONE Select New Rack and Pinion units meet or exceed O.E.M. performance. CSE Technology is based on over 40 years of reverse-engineering expertise, where original design weaknesses are identified and improved, resulting in premium-quality, brand-new parts you can rely on. All units adhere to strict S.A.E. specifications and are 100% tested to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- Environmentally-friendly coating applied to tie rods and lines to provide a clean appearance and prevent rust
- 100% performance testing to ensure perfect fit, function and reliable performance
- Computerized spool valve balancing ensures exceptional steering feel
- Supplied with O.E.M. grade seals, O-rings and boots to provide optimal sealing performance and longevity
- Built to meet or exceed O.E.M. performance
Hitachi – Power Steering Pump Actual OE Part – New (Part No.PSP0007)
from
$419.99
Hitachi’s Power Steering Pumps (PSPs) are the heart of the hydraulically actuated power steering system. With a cast aluminum housing to keep weight down and machined steel internals, Hitachi’s PSPs ensure durability with high thermal efficiency. Precision machined surfaces reduce pressure loss and provide quieter operating characteristics. High strength internal components result in greater durability and efficiency. Designed to meet the exact needs of each specific vehicle, Hitachi’s Power Steering Pumps are the premium choice. Hitachi is a Tier One OE supplier to the largest automobile manufacturers globally, delivery industry leading quality, and exceeding customer expectations with our products and service. Hitachi is bringing that same knowledge and expertise to the premium products we deliver in the Aftermarket because Quality Matters.
Product Features:
See More
Product Features:
- Hitachi is a Tier 1 OE supplier for power steering pumps
- 100% NEW, never remanufactured
- Meets the OE performance and durability standards for this application
- Aluminum housing for increased weight reduction and high thermal efficiency
- Precision machined surfaces reduce pressure loss and decrease Noise, Vibration, and Harshness (NVH)
- High strength internal components result in greater longevity and efficiency
- Pulley always included, O-Ring/Gaskets included when applicable
Hitachi – Power Steering Pump Actual OE Part – New (Part No.PSP0019)
from
$454.99
Hitachi’s Power Steering Pumps (PSPs) are the heart of the hydraulically actuated power steering system. With a cast aluminum housing to keep weight down and machined steel internals, Hitachi’s PSPs ensure durability with high thermal efficiency. Precision machined surfaces reduce pressure loss and provide quieter operating characteristics. High strength internal components result in greater durability and efficiency. Designed to meet the exact needs of each specific vehicle, Hitachi’s Power Steering Pumps are the premium choice. Hitachi is a Tier One OE supplier to the largest automobile manufacturers globally, delivery industry leading quality, and exceeding customer expectations with our products and service. Hitachi is bringing that same knowledge and expertise to the premium products we deliver in the Aftermarket because Quality Matters.
Product Features:
See More
Product Features:
- Hitachi is a Tier 1 OE supplier for power steering pumps
- 100% NEW, never remanufactured
- Meets the OE performance and durability standards for this application
- Aluminum housing for increased weight reduction and high thermal efficiency
- Precision machined surfaces reduce pressure loss and decrease Noise, Vibration, and Harshness (NVH)
- High strength internal components result in greater longevity and efficiency
- Pulley always included, O-Ring/Gaskets included when applicable
Cardone – Power Steering Pump (Part No.21-5367)
from
$201.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Hitachi – Power Steering Pump Actual OE Part – New (Part No.PSP0015)
from
$504.99
Hitachi’s Power Steering Pumps (PSPs) are the heart of the hydraulically actuated power steering system. With a cast aluminum housing to keep weight down and machined steel internals, Hitachi’s PSPs ensure durability with high thermal efficiency. Precision machined surfaces reduce pressure loss and provide quieter operating characteristics. High strength internal components result in greater durability and efficiency. Designed to meet the exact needs of each specific vehicle, Hitachi’s Power Steering Pumps are the premium choice. Hitachi is a Tier One OE supplier to the largest automobile manufacturers globally, delivery industry leading quality, and exceeding customer expectations with our products and service. Hitachi is bringing that same knowledge and expertise to the premium products we deliver in the Aftermarket because Quality Matters.
Product Features:
See More
Product Features:
- Hitachi is a Tier 1 OE supplier for power steering pumps
- 100% NEW, never remanufactured
- Meets the OE performance and durability standards for this application
- Aluminum housing for increased weight reduction and high thermal efficiency
- Precision machined surfaces reduce pressure loss and decrease Noise, Vibration, and Harshness (NVH)
- High strength internal components result in greater longevity and efficiency
- Pulley always included, O-Ring/Gaskets included when applicable
Atlantic Automotive Eng. – Power Steering Pump, Remanufactured (Part No.M20101618117AAE)
from
$792.10
AAE remanufactured Power Steering Pumps not only offer a high quality, low cost alternative to new parts, but are the leading choice in the remanufactured market.
Product Features:
See More
Product Features:
- OEM-Quality and Direct Fit replacement.
- Original Equipment Supplier
- 100% new, premium-grade seals
- Surface wear on cam packs are microfinished
- Seal surface on input shafts are microfinished for leak-free sealing
- Pumps are thoroughly tested
Cardone New – Power Steering Pump (Part No.96-5485)
from
$201.99
Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals for reliability you can count on.
Product Features:
See More
Product Features:
- Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
- Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
- Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
- Meets or exceeds O.E. performance.
Cardone – Power Steering Pump (Part No.21-5485)
from
$178.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)
from
$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.
Product Features:
See More
Product Features:
- Transmission cooler reinstallation kit
- Contains part numbers 248001, 226201, 240250 and 4 hose clamps
- Provides all hardware for reinstallation of Imperial transmission coolers
- Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Factory Air – Transmission Oil Cooler Replacement Hose (Part No.53015)
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Product Features:
See More
- Power steering oil cooler
- 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – Mounting Kit System (Part No.226201)
from
$11.49
Product Features:
See More
- Imperial mounting kit system
- For installation of transmission coolers and electric fans
- Provides quick, effective installation of Imperial products
- Contains nylon mounting rods, foam pads and locking buttons
- Atermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
Carquest Premium – Pressure Hose Assembly (Part No.39902)
from
$89.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Carquest Premium – Pressure Hose Assembly (Part No.37472)
from
$90.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Rein – Power Steering High Pressure Feed Assembly (Part No.PSH0471)
from
$134.99
Rein OE Quality power steering high pressure feed hose assemblies are designed to save valuable labor time. During the manufacturing process, each high pressure feed assembly undergoes rigorous testing of its tensile strength, burst pressure, low temperature flexibility, impulse, and corrosion resistance to exceed industry standards. Rein high pressure hose assemblies are built with SAE J188 compliant rubber compound hose with an internal noise absorber, not included by most competitors, along with protective jacket(s) and or heat sleeve(s). The SAE J526 compliant tubing sections of the assemblies, along with their end fittings, are made of heavy duty carbon steel which are either resin, zinc or zinc plus powder coated for rust resistance. Tying the individual sections together are coated hose crimp ends, pre assembled brackets which eliminate the need for special tools, sealing hardware, and a pressure switch port all as specified by the OE manufacturer.
Product Features:
See More
Product Features:
- A direct fit, replacement hose and line assembly
- SAE J188 compliant high pressure rubber compound hose with internal noise absorber
- SAE J526 compliant coated, rust resistant heavy duty tubing and end fittings
- Pre assembled coated, rust resistant hose crimp end(s) and bracket(s), where required
- Pre attached protective jacket(s) and heat sleeve(s), where required
Carquest Premium – Pressure Hose Assembly (Part No.40061)
from
$85.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Carquest Premium – Pressure Hose Assembly (Part No.37474)
from
$92.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Rein – Automotive Power Steering Pressure Line Hose Assembly (Part No.M2015521824RIN)
from
$197.90
This OE quality power steering hose is the perfect replacement hose to meet the high demands placed on systems like power steering. Rein automotive products provide you with the proper fit, form and function for European vehicles. With fitments for some of the world’s finest automobiles, including Audi, BMW, Mercedes Benz, Mini, Porsche, Saab, Volkswagen, and Volvo all Rein Automotive genuine replacement parts are guaranteed original manufacturer quality. Every part is manufactured with top quality materials to ensure it has the same tolerances as the part that came on the car to provide ease of installation and long lasting durability.
Product Features:
See More
Product Features:
- Original Equipment fit, form and function
- Manufactured from premium raw materials
- Premium OE design
- Right fit the first time
- For European vehicles
Carquest Premium – Pressure Tube Assembly (Part No.39903)
from
$45.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Carquest Premium – Pressure Tube (Part No.38154)
from
$86.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.
Product Features:
See More
Product Features:
- Double lock beading with barbed tube end provides superior hose/coupling integrity
- Zinc coated tubes protect against rust and corrosion
Carquest Premium – Pressure Hose Assembly (Part No.39900)
from
$50.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Carquest Premium – Pressure Tube Assembly (Part No.39901)
from
$38.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Popular 2020 Nissan Murano Power Steering Parts Categories
2020 Nissan Murano Power Steering Parts
Maybe you’re in the middle of a full rebuild of that 2020 Nissan Murano. Maybe you just need a couple of Power Steering Parts. Either way, Advance Auto Parts has 7 different Power Steering Parts in our inventory ranging from $11.49 to $792.10. That means you can find the exact parts or products you need to keep that 2020 Nissan Murano running smoothly.
Power Steering Parts are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 2020 Nissan Murano. Imperial, Carquest Premium, and Maval are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Power Steering Parts for your 2020 Nissan Murano, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Power Steering Parts to keep your 2020 Nissan Murano rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Power Steering Parts Brands To Make Your 2020 Nissan Murano Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2020 Nissan Murano demands trusted brand parts and products to keep it running. Many trusted brands of Power Steering Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Murano the best it can be. Be sure to browse some of our top Power Steering Parts brands and parts.
Popular Imperial Power Steering Parts
We carry Imperial parts in our stock across Power Steering Coolers and Power Steering Pressure Hoses categories, plus more. For a 2020 Nissan Murano, our most popular Imperial Power Steering Parts include:
FAQs for 2020 Nissan Murano Power Steering Parts
What are the most purchased Power Steering Parts for the 2020 Nissan Murano?
Out of 7 Power Steering Parts for the 2020 Nissan Murano, the most popular in our inventory are:
from
$57.99
This product is not rated
14MM Male Inv. Flare x 16MM Male O Ring
Power Steering Pressure Hoses
