2020 Kia Car Parts

The K&N Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smooths and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. The air intake comes with a black rubber topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive silver powder-coat finish that’s made to last and it accommodates the factory mass air sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.

Product Features:

• Guaranteed to increase horsepower
• Designed to improve throttle response and engine sound
• Low restriction aluminum tube
• Easy to install, usually in 90 minutes or less
• Filter lasts up to 100,000 miles before service is required
• Replaces stock air intake system
• Washable and reusable lifetime air filter
• K&N Million Mile Limited Warranty

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.

Product Features:

• Guaranteed to increase horsepower and torque.
• Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
• Engineered to provide high airflow and exceptional filtration.
• Replaces factory air filter and intake tube.
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
• Typical installation can be completed in 60 minutes or less with simple hand tools.
• No-Hassle Lifetime Limited Warranty.
• Will not void vehicle warranty(limited)

This Performance Air Intake System allows your engine to breath more air compared to the restrictive factory air intake housing. It is designed, tuned, And dyno-tested to produce more horsepower And torque. The cone-shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). A custom shaped heat shield with edge trim lining is included to keep engine bay heat from the air intake. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system is backed by AEM’s Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California And other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.

Introducing our latest Burco 5795 replacement car mirror, the ideal choice for Kia Rio and Hyundai Accent owners who want to boost safety and visibility on the road without the hassle. This economical side mirror features a straightforward glass-only design, making DIY mirror replacement a breeze¿no complicated repairs here! Whether you’re fixing a cracked mirror or swapping out a tired, worn part, this cost-saving side mirror delivers on every front. Rest easy knowing the Burco 5795 meets industry safety compliance standards, providing a crystal-clear view that enhances your driving experience. Don¿t let a damaged mirror hold you back¿choose the Burco 5795 for reliable performance and a stress-free installation that keeps your wallet happy!

Product Features:

• Made in USA
• Exact Fit
• Safety Smooth Edges
• Replaces OE Mirror
• Premium Mirror Glass
• Break-Free Guarantee
• Instructions Included

Uplift your driving experience with the Burco 5680B replacement side view mirror, expertly crafted for your Kia Optima. This affordable side mirror is not just a simple fix; it¿s a cost-saving side mirror solution that ensures your vehicle¿s safety and visibility are top-notch. Installation is quick and easy, making this a perfect DIY mirror replacement project for anyone, regardless of skill level. Plus, with its integrated blind spot icon, you can drive with added peace of mind. The Burco 5680B meets all safety compliance standards, so you can repair your mirror without breaking the bank. Don¿t let a damaged side view mirror hold you back; choose the Burco 5680B for a reliable, precise, and economical upgrade that keeps you and your passengers secure on the road!

Product Features:

• Made in USA
• Exact Fit
• Safety Smooth Edges
• Replaces OE Mirror
• Premium Mirror Glass
• Break-Free Guarantee
• Instructions Included

Revealing the Burco 5624B replacement side view mirror, the ultimate solution for Kia Sedona owners looking to restore safety and visibility on the road. Designed with precision and affordability in mind, this automotive side mirror replacement is perfect for budget-conscious drivers. Its DIY-friendly installation process means you can easily swap out a broken mirror without breaking the bank or getting overwhelmed. Plus, the Burco 5624B meets all safety compliance standards, ensuring you¿re equipped with a reliable product that enhances your driving experience. With a handy Blind Spot icon included, navigating traffic becomes a breeze. Upgrade to the Burco 5624B today for the best replacement side mirror that keeps your vehicle looking sharp while elevating safety and awareness!

Product Features:

• Made in USA
• Exact Fit
• Safety Smooth Edges
• Replaces OE Mirror
• Premium Mirror Glass
• Break-Free Guarantee
• Instructions Included

Welcome to enhanced driving safety with the Burco 5679B replacement car mirror, specifically designed for Kia Sorento owners who prioritize visibility on the road. This affordable side mirror not only restores your vehicle¿s functionality but also features a Blind Spot icon to help you stay aware of surrounding traffic. With a quick and straightforward installation process, you can wave goodbye to the hassle of complicated repairs and enjoy the peace of mind that comes from a reliable automotive mirror replacement. The Burco 5679B meets all safety standards, ensuring exceptional clarity and performance. Whether you’re fixing a cracked mirror or upgrading your car¿s look, this side view mirror replacement ensures you drive confidently. Make the smart choice for your safety¿get your Burco 5679B today and experience the difference!

Product Features:

• Made in USA
• Exact Fit
• Safety Smooth Edges
• Replaces OE Mirror
• Premium Mirror Glass
• Break-Free Guarantee
• Instructions Included

Meet the Burco 5624 replacement side view mirror, your economical solution for restoring safety and visibility to your Kia Sedona. Crafted specifically for this model, it features a glass-only design that simplifies DIY installation¿no complicated tools or professional assistance needed! With a quick, cost-saving replacement, you can effortlessly swap out your broken mirror and keep your vehicle looking sharp and functional. This reliable option not only meets all safety compliance standards but enhances your driving experience. Say goodbye to unsafe conditions caused by cracked or shattered mirrors. Trust the Burco 5624 to elevate your vehicle’s visibility, ensuring you navigate the road with confidence. When it comes to the best replacement side mirror, this choice checks all the boxes for those eager to get back on the road safely and affordably. Don’t let a broken mirror hold you back¿choose Burco for quality you can depend on!

Product Features:

• Made in USA
• Exact Fit
• Safety Smooth Edges
• Replaces OE Mirror
• Premium Mirror Glass
• Break-Free Guarantee
• Instructions Included

Introducing the Burco 4766 replacement car mirror, the perfect solution for restoring safety and visibility to your Kia Rio or Hyundai Accent. Designed with precision, this side view mirror features glass only, making it an economical choice for those wanting to repair a broken mirror without investing in a whole assembly. The installation is quick and hassle-free, allowing even car maintenance novices to confidently complete the task. Plus, this replacement mirror adheres to safety compliance standards, ensuring that you¿re not just fixing your vehicle, but also enhancing your overall driving experience. With the Burco 4766, you¿ll enjoy crystal-clear visibility and peace of mind on the road, all while saving money. Don¿t let a damaged mirror hold you back; get back on track with this reliable and efficient solution!

Product Features:

• Made in USA
• Exact Fit
• Safety Smooth Edges
• Replaces OE Mirror
• Premium Mirror Glass
• Break-Free Guarantee
• Instructions Included

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new oem replacement driver side power door mirror, with heated glass, turn signal and blind spot detection, paint to match. It is designed to replace your existing driver side door mirror. Check to be sure it fits your vehicle.

Product Features:

• With Heated Glass, Turn Signal And Blind Spot Detection, Paint To Match, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Warranty: Limited
• Check Out The Large Selection Of Parts Available For Your Vehicle

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new oem replacement passenger side power door mirror, power folding, with heated glass and turn signal, without blind spot detection, paint to match. It is designed to replace your existing passenger side door mirror. Check to be sure it fits your vehicle.

Product Features:

• Power Folding, With Heated Glass And Turn Signal, Without Blind Spot Detection, Paint To Match, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Warranty: Limited
• Check Out The Large Selection Of Parts Available For Your Vehicle

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new oem replacement driver side power door mirror, power folding, with heated glass, turn signal and blind spot detection, paint to match. It is designed to replace your existing driver side door mirror. Check to be sure it fits your vehicle.

Product Features:

• Power Folding, With Heated Glass, Turn Signal And Blind Spot Detection, Paint To Match, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Warranty: Limited
• Check Out The Large Selection Of Parts Available For Your Vehicle

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new oem replacement passenger side power door mirror, with heated glass and turn signal, paint to match. It is designed to replace your existing passenger side door mirror. Check to be sure it fits your vehicle.

Product Features:

• With Heated Glass And Turn Signal, Paint To Match, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Warranty: Limited
• Check Out The Large Selection Of Parts Available For Your Vehicle

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new oem replacement passenger side power door mirror, power folding, with heated glass, turn signal, memory and blind spot detection, paint to match. It is designed to replace your existing passenger side door mirror. Check to be sure it fits your vehicle.

Product Features:

• Power Folding, With Heated Glass, Turn Signal, Memory And Blind Spot Detection, Paint To Match, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Warranty: Limited
• Check Out The Large Selection Of Parts Available For Your Vehicle

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new oem replacement driver side power door mirror, with heated glass and turn signal, paint to match. It is designed to replace your existing driver side door mirror. Check to be sure it fits your vehicle.

Product Features:

• With Heated Glass And Turn Signal, Paint To Match, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Warranty: Limited
• Check Out The Large Selection Of Parts Available For Your Vehicle

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new oem replacement passenger side power door mirror, power folding, with heated glass, turn signal and blind spot detection, paint to match. It is designed to replace your existing passenger side door mirror. Check to be sure it fits your vehicle.

Product Features:

• Power Folding, With Heated Glass, Turn Signal And Blind Spot Detection, Paint To Match, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Warranty: Limited
• Check Out The Large Selection Of Parts Available For Your Vehicle

Dee Zee NXc Steps (board) The NXc step is designed for today crossover utility vehicles (CUV). A universal board combined with custom fit brackets (sold separately) fit all listed applications. The board is available in three different finishes for step and trim, Black or Chrome, Black or Black, Stainless or Black. Lightweight aluminum powder coated frame. Full length protective accent trim. Slip resistant raised rubber grommets on step area. Required custom fit bracket kits sold separately. Stainless or Black

Product Features:

• Lightweight Aluminum Powder Coated Frame
• Full Length Protective Accent Trim
• Slip Resistant Raised Rubber Grommets On The Step Area
• NRT(TM) Powder Coated Steel Braces
• No Drilling Required

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new oem replacement driver side power door mirror, power folding, with heated glass and turn signal, without blind spot detection, paint to match. It is designed to replace your existing driver side door mirror. Check to be sure it fits your vehicle.

Product Features:

• Power Folding, With Heated Glass And Turn Signal, Without Blind Spot Detection, Paint To Match, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Warranty: Limited
• Check Out The Large Selection Of Parts Available For Your Vehicle

Dee Zee NXc Steps (board) The NXc step is designed for today crossover utility vehicles (CUV). A universal board combined with custom fit brackets (sold separately) fit all listed applications. The board is available in three different finishes for step and trim, Black or Chrome, Black or Black, Stainless or Black. Lightweight aluminum powder coated frame. Full length protective accent trim. Slip resistant raised rubber grommets on step area. Required custom fit bracket kits sold separately. Black or Chrome

Product Features:

• Lightweight Aluminum Powder Coated Frame
• Full Length Protective Accent Trim
• Slip Resistant Raised Rubber Grommets On The Step Area
• NRT(TM) Powder Coated Steel Braces
• No Drilling Required

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new CAPA certified standard replacement front upper grille, for use with pre-collision system, painted black with chrome frame. It is designed to replace your existing front upper grille. Check to be sure it fits your vehicle.

Product Features:

• For Use With Pre-Collision System, Painted Black With Chrome Frame, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Warranty: Limited
• Check Out The Large Selection Of Parts Available For Your Vehicle

Dee Zee NXc Steps (board) The NXc step is designed for today crossover utility vehicles (CUV). A universal board combined with custom fit brackets (sold separately) fit all listed applications. The board is available in three different finishes for step and trim, Black or Chrome, Black or Black, Stainless or Black. Lightweight aluminum powder coated frame. Full length protective accent trim. Slip resistant raised rubber grommets on step area. Required custom fit bracket kits sold separately. Black or Black

Product Features:

• Lightweight Aluminum Powder Coated Frame
• Full Length Protective Accent Trim
• Slip Resistant Raised Rubber Grommets On The Step Area
• NRT(TM) Powder Coated Steel Braces
• No Drilling Required

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new oem replacement driver side power door mirror, without heated glass, paint to match. It is designed to replace your existing driver side door mirror. Check to be sure it fits your vehicle.

Product Features:

• Without Heated Glass, Paint To Match, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Warranty: Limited
• Check Out The Large Selection Of Parts Available For Your Vehicle

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new oem replacement passenger side power door mirror, without heated glass, paint to match. It is designed to replace your existing passenger side door mirror. Check to be sure it fits your vehicle.

Product Features:

• Without Heated Glass, Paint To Match, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Warranty: Limited
• Check Out The Large Selection Of Parts Available For Your Vehicle

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new oem replacement driver side power door mirror, with heated glass, paint to match. It is designed to replace your existing driver side door mirror. Check to be sure it fits your vehicle.

Product Features:

• With Heated Glass, Paint To Match, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Warranty: Limited
• Check Out The Large Selection Of Parts Available For Your Vehicle

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new CAPA certified standard replacement front grille, for ex models, painted black with chrome frame. It is designed to replace your existing front grille. Check to be sure it fits your vehicle.

Product Features:

• For Ex Models, Painted Black With Chrome Frame, Made Of ABS Thermoplastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Warranty: Limited
• Check Out The Large Selection Of Parts Available For Your Vehicle

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new oem replacement passenger side power door mirror, with heated glass, without turn signal, paint to match. It is designed to replace your existing passenger side door mirror. Check to be sure it fits your vehicle.

Product Features:

• With Heated Glass, Without Turn Signal, Paint To Match, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Warranty: Limited
• Check Out The Large Selection Of Parts Available For Your Vehicle

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new standard replacement front bumper cover grille, except sx and sx limited, for use with adaptive cruise, bright black. It is designed to replace your existing bumper cover grille. Check to be sure it fits your vehicle.

Product Features:

• Except Sx And Sx Limited, For Use With Adaptive Cruise, Bright Black, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Warranty: Limited
• Check Out The Large Selection Of Parts Available For Your Vehicle

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new standard replacement front grille, for ex models, painted black with chrome frame. It is designed to replace your existing front grille. Check to be sure it fits your vehicle.

Product Features:

• For Ex Models, Painted Black With Chrome Frame, Made Of ABS Thermoplastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Warranty: Limited
• Check Out The Large Selection Of Parts Available For Your Vehicle

For some, it’s more than just a drive. It’s about definition — finding the rush that comes with your hands on the wheel and your foot on the gas — and it starts by stepping into your vehicle with confidence. ARIES AeroTread running boards give new definition to your drive with their sleek design, full-length treads and flawless finish. They feature unencumbered aluminum construction and a custom contour to redefine your look and offer a solid step up. Made specifically for today’s crossover and SUV, ARIES AeroTread running boards are marked for their aerodynamic look and lightweight build. They are constructed from an extruded aluminum base, making them strong and impervious to the elements. Each set of running boards features sleek, curved edges with tapered ends to seamlessly blend with the body of your vehicle. To give you the exact, customized look you want, AeroTread running boards come with one of two front-trim finish options: polished stainless steel or black carbide powder-coated stainless steel. They are also equipped with a 5″ wide, hard plastic step pad that runs the entire length of the board, providing a non-skid surface no matter where you place your foot. AeroTread running boards install using a track mounting system to attach vehicle-specific brackets, and pre-existing holes in the vehicle’s frame are used to eliminate drilling, speed up installation and ensure stable footing (NOTE: Mounting brackets are sold separately, see the application information to determine which brackets and boards fit your vehicle). The mounting brackets are made from steel and are coated in a powder coat finish for long-lasting dependability. Whatever road you choose, define your drive with ARIES AeroTread running boards.

Product Features:

• Sleek design with rounded ends to complement the look of modern SUVs and CUVs
• Extruded aluminum base to be lightweight and rust-free
• Polished stainless steel front trim piece for a distinct, rust-free accent
• Flat profile and 5″ width provide a comfortable step
• Full-length, tough plastic treads offer a reliable, non-skid surface
• Universal track mounting system for easy, secure installation
• No-drill, vehicle-specific application for a custom fit
• Heavy-duty steel mounting brackets for a solid step

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new oem replacement front grille, for use without camera, black with chrome molding, excludes sx models. It is designed to replace your existing grille. Check to be sure it fits your vehicle.

Product Features:

• For Use Without Camera, Black With Chrome Molding, Excludes SX Models, Made Of ABS Thermoplastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Warranty: Limited
• Check Out The Large Selection Of Parts Available For Your Vehicle

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new oem replacement front grille, painted silver gray with outer chrome molding, for lx models. It is designed to replace your existing grille. Check to be sure it fits your vehicle.

Product Features:

• Painted Silver Gray With Outer Chrome Molding, For LX Models, Made Of ABS Thermoplastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Warranty: Limited
• Check Out The Large Selection Of Parts Available For Your Vehicle

One of the obvious signs of a bad ABS (Anti-Lock Brake System) Sensor is of course the ABS light (trouble code) and the noticeable distance it normally takes for your vehicle to come to a safe stop. HL Mando OE ABS Sensors are not only designed to help clear that trouble code, but more importantly give you a peace of mind knowing that your ABS system can once again function precisely as designed by factory. Trust HL Mando brand for brake system safety as we are the original – We Are OE!

Product Features:

• Direct Original Equipment Replacement
• Tested for Quality, Durability, and Reliability
• Includes ABS Wheel Speed Sensor Wire Harness
• Manufactured in Korea

Anchor 10059 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2015-2020
• Weight approx: 7 Lbs

Anchor 10034 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2017-2022
• Weight approx: 4 Lbs

Anchor 10023 The Torque Strut prevents engine rocking. Each part is engineered and designed to OE Standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2013-2020
• Weight approx: 3 Lbs

Carquest Premium vehicle speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium vehicle speed sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each vehicle speed sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium speed sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• O-rings or seals are included (where applicable)
• Magnet size and strength optimized for precise signal output.
• Weather-tight connectors prevent leaks and corrosion for longer life
• Extensive design validation testing and 100% end-of-line tested
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• O-rings or seals are included (where applicable)
• Weather-tight connectors prevent leaks and corrosion for longer life
• Includes all necessary brackets and grommets for easier installation
• Extensive design validation testing and 100% end-of-line tested
• Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

One of the obvious signs of a bad ABS (Anti-Lock Brake System) Sensor is of course the ABS light (trouble code) and the noticeable distance it normally takes for your vehicle to come to a safe stop. HL Mando OE ABS Sensors are not only designed to help clear that trouble code, but more importantly give you a peace of mind knowing that your ABS system can once again function precisely as designed by factory. Trust HL Mando brand for brake system safety as we are the original – We Are OE!

Product Features:

• Direct Original Equipment Replacement
• Tested for Quality, Durability, and Reliability
• Includes ABS Wheel Speed Sensor Wire Harness
• Manufactured in Korea

TCR was established by a group of industry veterans determined to create a torque converter company that puts customers and people first. Our people have the values, knowledge, and experience to provide our customers with great products and personal service. Our products are built by highly skilled professionals with decades of experience. Our product line includes automotive, heavy duty and high performance converters for all makes and models.

Product Features:

• TCR ensures the highest quality with its remanufactured torque converters utilizing O.E. bearing and new seals when possible.
• TCR automotive, heavy duty, and high performance converters are built by professionals with decades of experience.

Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• O-rings or seals are included (where applicable)
• Weather-tight connectors prevent leaks and corrosion for longer life
• Includes all necessary brackets and grommets for easier installation
• Extensive design validation testing and 100% end-of-line tested
• Weather-tight connectors prevent leaks and corrosion for longer life

Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• O-rings or seals are included (where applicable)
• Weather-tight connectors prevent leaks and corrosion for longer life
• Includes all necessary brackets and grommets for easier installation
• Extensive design validation testing and 100% end-of-line tested
• Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
• Fluorocarbon high-temperature O-ring seals coated with lubricant for easy installation prevents hub contamination.

Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• O-rings or seals are included (where applicable)
• Weather-tight connectors prevent leaks and corrosion for longer life
• Includes all necessary brackets and grommets for easier installation
• Extensive design validation testing and 100% end-of-line tested
• Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• O-rings or seals are included (where applicable)
• Weather-tight connectors prevent leaks and corrosion for longer life
• Includes all necessary brackets and grommets for easier installation
• Extensive design validation testing and 100% end-of-line tested
• Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• O-rings or seals are included (where applicable)
• Weather-tight connectors prevent leaks and corrosion for longer life
• Includes all necessary brackets and grommets for easier installation
• Extensive design validation testing and 100% end-of-line tested
• Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
• Fluorocarbon high-temperature O-ring seals coated with lubricant for easy installation prevents hub contamination.

Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• O-rings or seals are included (where applicable)
• Weather-tight connectors prevent leaks and corrosion for longer life
• Includes all necessary brackets and grommets for easier installation
• Extensive design validation testing and 100% end-of-line tested
• Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Anchor 10024 The Torque Strut prevents engine rocking. Each part is engineered and designed to OE Standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2013-2022
• Weight approx: 4 Lbs

Anchor 9995 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2016-2020
• Weight approx: 6 Lbs

Anchor 10025 The Torque Strut prevents engine rocking. Each part is engineered and designed to OE Standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2016-2021
• Weight approx: 4 Lbs

Anchor 10128 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2016-2021
• Weight approx: 7 Lbs

Anchor 10123 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2016-2021
• Weight approx: 7 Lbs

This mount supports the transmission and dampens vibration. All mounts are engineered and designed to OEM standards using the latest CAD/CAM engineering process ensuring the highest consistency and quality. Only natural and Styrene Butadiene rubber is used to provide premium abrasion resistance, aging stability to ensure maximum life, and performance. Any included fasteners are hardened steel with heat treated Grade 5 bolts. Chemlock bonding agent is used to ensure a superior rubber-to-metal bond. All Rubber material is manufactured to specific Durometer (hardness) measurements based on vehicle application requirements. Hydraulic Mounts, applicable where OE, are engineered for high vibration and torque applications and filled with special hydraulic fluid to dampen excess noise and vibration.

Product Features:

• This mount supports the transmission and dampens vibration.
• Natural and SBR rubber provide maximum life and performance.
• Steel fasteners are heat treated grade 5 bolts.
• A special bonding agent is used to ensure a rubber to metal bond.
• Rubber material is mixed to specific Durometer, hardness.
• Limited Warranty.
• All mounts are specifically engineered and designed to OE standards using the latest CAD/CAM engineering process ensuring the highest consistency and quality.
• Only natural and Styrene Butadiene rubber is used to provide premium abrasion resistance and aging stability to ensure maximum life and performance.
• Any included fasteners are hardened steel with heat treated Grade No. 5 bolts.
• Chemlock bonding agent is used to ensure a superior rubber-to-metal bond.
• All Rubber material is manufactured to specific Durometer (hardness) measurements based on vehicle application requirements.
• Hydraulic Mounts, applicable where OE, are specifically engineered for high vibration and torque applications and are filled with special hydraulic fluid to dampen excess noise and vibration.

An automatic transmission is a hydraulic multi-speed device that does not require any input from the vehicle operator other than selecting vehicle direction. Hydraulic pressure is controlled by a series of electronic shift solenoids that are commanded by the transmission control module. Planetary gear sets and hydraulically controlled shift plates and brake bands apply power to the main shaft in the transmission and out to the vehicles drive wheels. The Transmission Pressure Control Solenoid controls the flow of fluid in the various hydraulic circuits.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Precision-wound coated copper windings increase product durability and life cycle.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.

The Budge Basic van cover offers single layer, basic protection against dust and debris – at a budget friendly price. Lightweight and easy to use, this vehicle cover is perfect for indoor use or occasional outdoor protection. The Budge Basic van cover is constructed from a single layer of polypropylene. This material is fully breathable to prevent mold and mildew. This cover is nonabrasive and will not harm your vehicle’s exterior. Our Budge Basic covers are light gray in color. This is a suitable indoor and short term outdoor cover for your van. Our covers are available in a variety of sizes that will popular van makes and models. Cover includes a storage bag and antenna patch.

Product Features:

• This van cover fits vans 216″ L x 60″ W x 60″ H
• Great Indoor and Occasional Outdoor Protection
• This vehicle cover features double stitched seams for added durability
• A full elastic hem helps keep the car cover securely on your vehicle
• Will defend against dust, dirt, bird droppings, tree sap and more

The Ultra van cover offers protection against dust, debris, tree sap and other environmental pollutants. This lightweight van car cover is comprised of 3 layers of polypropylene. Our Ultra car covers are fully breathable, with ultra-sonically welded seams for added durability. This cover is perfect for garage or carport stored vehicles, and can also be used for short-term outdoor storage. This soft, nonabrasive material will not harm the surface of your vehicle. The Ultra cover features a full elastic hem and built-in grommets. This auto cover is gray in color and includes a storage bag and antenna patch.

Product Features:

• This van cover fits mini vans 216″ L x 60″ W x 60″ H
• This van cover is made from a 3 layer, UV resistant material that will protected your vehicle’s paint from fading
• This van cover is water resistant and features ultrasonically welded seams for extra durability
• Cover is suitable for short term outdoor protection and long-term indoor protection
• Full elastic hem to keep the cover securely on the vehicle

The Rightline Gear Sport 3 Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport 3 is one of the largest car top bags on the market.

Product Features:

• Capacity: 18 cu ft
• Dimensions: 48″ L x 36″ W x 18″ H
• Designed for SUVs and minivans, WITH or WITHOUT a roof rack
• Designed for SUVs and minivans, WITH or WITHOUT a roof rack
• Enclosed front end helps fit your gear to the size of the carrier and prevents overfilling.
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

The Ultra SUV cover offers protection against dust, debris, tree sap and other environmental pollutants. This lightweight SUV car cover is comprised of 3 layers of polypropylene. Our Ultra SUV covers are fully breathable, with ultra-sonically welded seams for added durability. This cover is perfect for garage or carport stored vehicles, and can also be used for short-term outdoor storage. This soft, nonabrasive material will not harm the surface of your vehicle. The Ultra cover features a full elastic hem and built-in grommets. This auto cover is gray in color and includes a storage bag and antenna patch. Our SUV covers are available in a variety of sizes that will fit popular makes like Jeep, Toyota, Ford, Chevrolet, GMC and much more.

Product Features:

• This SUV cover fits SUVs 186″ L x 59″ W x 60″ H
• This SUV cover is made from a 3 layer, UV resistant material that will protected your vehicle’s paint from fading
• This SUV cover is water resistant and features ultrasonically welded seams for extra durability
• Cover is suitable for short term outdoor protection and long-term indoor protection
• Full elastic hem to keep the cover securely on the vehicle

The Ultra car cover offers protection against dust, debris, tree sap and other environmental pollutants. This lightweight vehicle cover is comprised of 3 layers of polypropylene. Our duor car covers are fully breathable, with ultra-sonically welded seams for added durability. This cover is perfect for garage or carport stored vehicles, and can also be used for short-term outdoor storage. This soft, nonabrasive material will not harm the surface of your vehicle. The Ultra cover features a full elastic hem and built-in grommets. This auto cover is gray in color and includes a storage bag and antenna patch. Our covers are available in a variety of sizes that will popular car makes and models.

Product Features:

• This car cover fits cars 200″ L x 60″ W x 51″ H
• This car cover is made from a 3 layer, UV resistant material that will protected your vehicle’s paint from fading
• This car cover is water resistant and features ultrasonically welded seams for extra durability
• Cover is suitable for short term outdoor protection and long-term indoor protection
• This car cover fits vehicles like: Ford Mustang, Chevrolet Corvette Stingray Coupe, Chevrolet Corvette, Ford Thunderbird, Honda Civic

The Budge Rain Barrier SUV cover offers easy to use, 100% waterproof indoor and outdoor protection. This SUV car cover is constructed from a 3 layer material consisting of an inside and outside layer of spun-bond polypropylene. The middle layer is made from a waterproof film. Unlike most waterproof SUV covers, the Budge Rain Barrier features micro-pore technology that allows condensation to escape as evaporated gas, giving your vehicle inside and outside protection. This cover is great for outdoor and indoor use. The soft, nonabrasive material will not harm the surface of your vehicle. This cover features a full elastic hem and built-in grommets. This cover is available in a gray color. Includes a storage bag and antenna patch. Our SUV covers are available in a variety of sizes that will fit popular makes like Jeep, Toyota, Ford, Chevrolet, GMC and much more.

Product Features:

• This SUV cover fits SUVs 186″ L x 59″ W x 60″ H
• This waterproof SUV cover will defend against outdoor elements like rain, snow, sun, dirt, dust and more
• This SUV car cover is made from a 3 layer microporous material that makes an ultimate rain barrier
• This vehicle cover features ultrasonically welded seams for extra durability and a full elastic hem to help keep your cover secure to your SUV
• Full elastic hem to keep the cover securely on the vehicle

The Budge Rain Barrier van cover offers easy to use, 100% waterproof indoor and outdoor protection. This SUV car cover is constructed from a 3 layer material consisting of an inside and outside layer of spun-bond polypropylene. The middle layer is made from a waterproof film. Unlike most waterproof SUV covers, the Budge Rain Barrier features micro-pore technology that allows condensation to escape as evaporated gas, giving your vehicle inside and outside protection. This cover is great for outdoor and indoor use. The soft, nonabrasive material will not harm the surface of your vehicle. This cover features a full elastic hem and built-in grommets. This cover is available in a gray color. Includes a storage bag and antenna patch.

Product Features:

• This van cover fits mini vans 216″ L x 60″ W x 60″ H
• This waterproof van cover will defend against outdoor elements like rain, snow, sun, dirt, dust and more
• This van car cover is made from a 3 layer microporous material that makes an ultimate rain barrier
• This vehicle cover features ultrasonically welded seams for extra durability and a full elastic hem to help keep your cover secure to your SUV
• Full elastic hem to keep the cover securely on the vehicle

The Protector V van cover features 5 durable layers to ensure 100% waterproof protection. Cover is made from three layers of polypropylene that rests on top of a fully waterproof membrane. The inner most layer is made from a nonabrasive fleece material so you won’t have to worry about scratching your vehicle. The Protector V is UV resistant waterproof breathable and durable making it ideal for all-weather protection. Cover comes with a built in strap and buckle system. This van cover fits vans 216″ L x 60″ W x 60″ H.

Product Features:

• This van cover fits vans 216″ L x 60″ W x 60″ H.
• This van cover is made from 5 durable layers – our thickest cover yet!
• This van car cover is 100% waterproof and UV resistant for superior outdoor protection
• This waterproof vehicle cover has a soft fleece inner lining that pampers your vehicle’s paint
• Built-in strap and buckle system keeps your van cover secure

Lightweight and thin, the special edition indoor stretch car cover from Budge is perfect for luxurious indoor protection against dust and air-borne pollutants. Silky to the touch with a soft fleece lining this vehicle cover stretches and conforms to the curves of your vehicle for a custom-like fit. This indoor car cover is ideal for long-term vehicle storage and garage kept vehicles. The thickness of the auto cover helps keep out dust and other indoor environmental hazards. The indoor stretch material is completely nonabrasive and will not scratch your vehicles surface. This cover is available in red, silver gray or black. A storage bag included for when not protecting your vehicle. Our covers are available in a variety of sizes that will popular car makes and models.

Product Features:

• This car cover fits cars 200″ L x 60″ W x 51″ H
• This indoor vehicle cover is made from a stretchable material conforms to you car
• Extremely soft fleece lining to protect your car from scratches
• This auto cover is suitable for indoor use or for garage kept vehicles
• This car cover fits vehicles like: Ford Mustang, Chevrolet Corvette Stingray Coupe, Chevrolet Corvette, Ford Thunderbird, Honda Civic

Lightweight and thin, the special edition indoor stretch car cover from Budge is perfect for luxurious indoor protection against dust and air-borne pollutants. Silky to the touch with a soft fleece lining this vehicle cover stretches and conforms to the curves of your vehicle for a custom-like fit. This indoor car cover is ideal for long-term vehicle storage and garage kept vehicles. The thickness of the auto cover helps keep out dust and other indoor environmental hazards. The indoor stretch material is completely nonabrasive and will not scratch your vehicles surface. This cover is available in red, silver gray or black. A storage bag included for when not protecting your vehicle. Our covers are available in a variety of sizes that will popular car makes and models.

Product Features:

• This car cover fits cars 170″ L x 60″ W x 48″ H
• This indoor vehicle cover is made from a stretchable material conforms to you car
• Extremely soft fleece lining to protect your car from scratches
• This auto cover is suitable for indoor use or for garage kept vehicles
• This car cover fits vehicles like: Volkswagen Beetle, Porsche Boxster, Mazda Miata, Pontiac Solstice, Chrysler Crossfire

Lightweight and thin, the special edition indoor stretch car cover from Budge is perfect for luxurious indoor protection against dust and air-borne pollutants. Silky to the touch with a soft fleece lining this vehicle cover stretches and conforms to the curves of your vehicle for a custom-like fit. This indoor car cover is ideal for long-term vehicle storage and garage kept vehicles. The thickness of the auto cover helps keep out dust and other indoor environmental hazards. The indoor stretch material is completely nonabrasive and will not scratch your vehicles surface. This cover is available in red, silver gray or black. A storage bag included for when not protecting your vehicle. Our covers are available in a variety of sizes that will popular car makes and models.

Product Features:

• This car cover fits cars 170″ L x 60″ W x 48″ H
• This indoor vehicle cover is made from a stretchable material conforms to you car
• Extremely soft fleece lining to protect your car from scratches
• This auto cover is suitable for indoor use or for garage kept vehicles
• This car cover fits vehicles like: Volkswagen Beetle, Porsche Boxster, Mazda Miata, Pontiac Solstice, Chrysler Crossfire

AVS In-channel Ventvisors offer a sleek profile that helps keep rain out and lets fresh air in to reduce interior heat build up. It’s easy no-drill application makes installation and provides a custom fit for your vehicle.

Product Features:

• Precision Engineered For A Custom Fit On Your Vehicle With Modern; Curved Low-Profile Design
• Installs In The Window Channel For A Sleek; Aerodynamic Appearance
• Made From Durable; Impact-Resistant Acrylic
• Available In Dark Smoke Finish

The Budge Rain Barrier car cover offers easy to use, 100% waterproof indoor and outdoor protection. This vehicle cover is constructed from a 3 layer material consisting of an inside and outside layer of spun-bond polypropylene. The middle layer is made from a waterproof film. Unlike most waterproof car covers, the Budge Rain Barrier features micro-pore technology that allows condensation to escape as evaporated gas, giving your vehicle inside and outside protection. This cover is great for outdoor and indoor use. The soft, nonabrasive material will not harm the surface of your vehicle. This cover features a full elastic hem and built-in grommets. This cover is available in a tan color. Includes a storage bag and antenna patch. Our car covers are available in a variety of sizes that will popular car makes and models. This car cover fits cars 200″ L x 60″ W x 51″ H.

Product Features:

• This car cover fits cars 200″ L x 60″ W x 51″ H.
• This waterproof car cover will defend against outdoor elements like rain, snow, sun, dirt, dust and more
• This car cover is made from a 3 layer microporous material that makes an ultimate rain barrier
• This vehicle cover features ultrasonically welded seams for extra durability
• Elasticized hem and sewn-in grommets hold your car cover in place in windy-conditions

The Rightline Gear Sport 2 Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport 2 is a popular size for many travelers.

Product Features:

• Capacity: 15 cu ft
• Dimensions: 42″ L x 34″ W x 18″ H
• Designed for SUVs, minivans, and crossovers, WITH or WITHOUT a roof rack
• 100% waterproof with welded seams and SZIP waterproof zipper; no zipper flap required
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

AVS In-channel Ventvisors offer a sleek profile that helps keep rain out and lets fresh air in to reduce interior heat build up. It’s easy no-drill application makes installation and provides a custom fit for your vehicle.

Product Features:

• Precision Engineered For A Custom Fit On Your Vehicle With Modern, Curved Low-Profile Design
• Installs In The Window Channel For A Sleek, Aerodynamic Appearance
• Made From Durable, Impact-Resistant Acrylic
• Available In Dark Smoke Finish

Freeze Plug Heater Cartridge made of cast aluminum. Interchangeable with the manufacturers original equipment-the only cost effective aftermarket solution available. Installs easily, just install in engine block core hole. No longer necessary to remove frost plug or drain coolant-just coat wit NSCG silicone grease G-624 (not included), insert, and clip into place. Original equipment for Toyota, Chrysler-jeep, Hyundai, Kia, and General Motors applications (see application guide for details). Simplified application information-Entire range of manufacturers applications covered by only five part numbers.

Product Features:

• Freeze plug heater cartridge

The Rightline Gear Sport Jr Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport Jr is the only car top bag made specifically for compact cars.

Product Features:

• Capacity: 10 cu ft
• Dimensions: 36″ L x 30″ W x 16″ H
• Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
• 100% waterproof with welded seams and SZIP waterproof zipper; no zipper flap required
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

AVS Original Ventvisor is an external mount side window deflector with an unique design that allows fresh air to circulate through open windows while keeping the weather out reducing interior heat and window fogging. Original Ventvisors come with a Limited Lifetime Warranty.

Product Features:

• Precision Engineered For A Custom Fit On Your Vehicle With Modern; Curved Design
• Easy Installation With No-Drilling Or Special Hardware Required
• Attaches Easily With 3M(TM) Automotive-Grade Adhesive Above The Window
• Made From Durable; Impact-Resistant Acrylic
• Available In Dark Smoke And Chrome Finishes

The Range 3 Car Top Carrier is weatherproof + and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. Use the Range Carrier on your next family vacation, backwoods expedition, shopping spree, or move.

Product Features:

• Capacity: 18 cu ft
• Dimensions: 48″ L x 36″ W x 18″ H
• Designed for SUVs and minivans, WITH or WITHOUT a roof rack
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

AVS Bugflector II is the highest-profile design providing maximum hood, fender, and windshield protection. The off-the-hood design allows for easy cleaning and waxing. Bugflector II are custom-molded, rugged, car wash safe and easy to install with no-drilling required. Comes with a .

Product Features:

• Provides Deflection To Protect Hood, Fenders, And Windshield
• High Profile, Full-Wrap Design For Trucks, SUVs, And Vans
• Off-The-Hood Design Allows For Easy Cleaning And Waxing
• Durable, Impact-Resistant Acrylic Construction
• Available In Dark Smoke Or Chrome
• Easy, No-Drill Installation

Kats Heater believes that quality is a basic requirement in the design, manufacture, and delivery of our products and services. Our quality policy is Total Customer Satisfaction in the delivery of products and services to consistently meet evolving customer expectations. We shall continuously pursue quality improvement programs that enable each employee to do his or her job right the first time and each time.

Product Features:

• Engine heater replacement cord

AVS Original Ventvisor is an external mount side window deflector with an unique design that allows fresh air to circulate through open windows while keeping the weather out reducing interior heat and window fogging. Original Ventvisors come with a .

Product Features:

• Precision Engineered For A Custom Fit On Your Vehicle With Modern, Curved Design
• Easy Installation With No-Drilling Or Special Hardware Required
• Attaches Easily With 3M(TM) Automotive-Grade Adhesive Above The Window
• Made From Durable, Impact-Resistant Acrylic
• Available In Dark Smoke And Chrome Finishes

Autocraft Easy Fit minivan cover offers superior protection for your vehicles. The fabric which is soft, breathable and with water repellent coating does not only prevent your vehicles from scratching but also protect against mold and mildew. It designed with a full elastic, double stitched hem and reinforced grommets to ensure a better and secure fit. Bag included for convient storage.

Product Features:

• Fit minivanss 16ft-17.6ft (4.8m-5.3m)
• Lightweight, breathable, non-abrasive fabric
• Water repellent coating, protects against mold and mildew
• Full elastic and double stitched hem to ensure a better fit
• 2 built-in reinforced grommets and 1 rope are included to keep your cover in place
• Antenna hole patch included to to provide additional protection from water or dust soak into the hole that you cut for antenna to pass through.
• Bag included for easy storage

In the quest for the most advanced concept in floor protection, the talented designers and engineers at WeatherTech have worked tirelessly to develop the most advanced floor protection available today. The WeatherTech FloorLiner accurately and completely lines the interior carpet giving absolute interior protection. The WeatherTech FloorLiner lines the interior carpet up the front, back and even up the sides of the vehicle footwell. Digital laser measurements of interior surfaces offer a consistently perfect fit. A patent pending High-Density Tri-Extruded (HDTE) material allows for a rigid core for strength while offering surface friction to the carpet, as well as tactile feel to the surface Advanced surfacing creates channels that carry fluids and debris to a lower reservoir with further channeling to help minimize fluid movement while driving Once fluids become trapped in the reservoir, away from shoes and clothing, they are easily removed from the WeatherTech FloorLiner over the door sill. No muss-no fuss.

Product Features:

• Accurately And Completely Lines The Interior Carpet Giving Absolute Interior Protection
• Lines The Interior Carpet Up The Front, Back And Even Up The Sides Of The Vehicle Footwell
• Digital Laser Measurements Of Interior Surfaces Offer A Consistently Perfect Fit
• A Patent Pending High Density Tri Extruded (HDTE) Material Allows For A Rigid Core For Strength While Offering Surface Friction To The Carpet, As Well As Tactile Feel To The Surface
• Advanced Surfacing Creates Channels That Carry Fluids And Debris To A Lower Reservoir With Further Channeling To Help Minimize Fluid Movement While Driving
• Manufactured From A Proprietary Custom Blended TPO (Thermopolyolefin) That Is Not Only Wear Resistant, But Also Remains Flexible Under Extreme Temperatures
• Available in fronts, rears, center hump, 3rd and 4th row, and complete sets
• Available in black, tan, grey and cocoa

In the quest for the most advanced concept in floor protection, the talented designers and engineers at WeatherTech have worked tirelessly to develop the most advanced floor protection available today. The WeatherTech FloorLiner accurately and completely lines the interior carpet giving absolute interior protection . The WeatherTech FloorLiner lines the interior carpet up the front, back and even up the sides of the vehicles footwell. Digital laser measurements of interior surfaces offer a consistently perfect fit. A patent pending High Density Tri Extruded material allows for a rigid core for strength while offering surface friction to the carpet, as well as tactile feel to the surface. Advanced surfacing creates channels that carry fluids and debris to a lower reservoir with further channeling to help minimize fluid movement while driving. Once fluids become trapped in the reservoir, away from shoes and clothing, they are easily removed from the WeatherTech FloorLiner over the door sill. No muss no fuss.

Product Features:

• Accurately And Completely Lines The Interior Carpet Giving Absolute Interior Protection
• Lines The Interior Carpet Up The Front, Back And Even Up The Sides Of The Vehicles Footwell
• Digital Laser Measurements Of Interior Surfaces Offer A Consistently Perfect Fit
• A Patent Pending High-Density Tri-Extruded Material Allows For A Rigid Core For Strength While Offering Surface Friction To The Carpet, As Well As Tactile Feel To The Surface
• Advanced Surfacing Creates Channels That Carry Fluids And Debris To A Lower Reservoir With Further Channeling To Help Minimize Fluid Movement While Driving
• Manufactured From A Proprietary Custom Blended TPO (Thermopolyolefin) That Is Not Only Wear Resistant, But Also Remains Flexible Under Extreme Temperatures
• Available in fronts, rears, center hump, 3rd and 4th row, and complete sets
• Available in black, tan, grey and cocoa

Lightweight and thin, the special edition indoor stretch car cover from Budge is perfect for luxurious indoor protection against dust and air-borne pollutants. Silky to the touch with a soft fleece lining this vehicle cover stretches and conforms to the curves of your vehicle for a custom-like fit. This indoor car cover is ideal for long-term vehicle storage and garage kept vehicles. The thickness of the auto cover helps keep out dust and other indoor environmental hazards. The indoor stretch material is completely nonabrasive and will not scratch your vehicles surface. This cover is available in red, silver gray or black. A storage bag included for when not protecting your vehicle. Our covers are available in a variety of sizes that will popular car makes and models.

Product Features:

• This car cover fits cars 200″ L x 60″ W x 51″ H
• This indoor vehicle cover is made from a stretchable material conforms to you car
• Extremely soft fleece lining to protect your car from scratches
• This auto cover is suitable for indoor use or for garage kept vehicles
• This car cover fits vehicles like: Ford Mustang, Chevrolet Corvette Stingray Coupe, Chevrolet Corvette, Ford Thunderbird, Honda Civic

In the quest for the most advanced concept in floor protection, the talented designers and engineers at WeatherTech have worked tirelessly to develop the most advanced floor protection available today. The WeatherTech FloorLiner accurately and completely lines the interior carpet giving absolute interior protection . The WeatherTech FloorLiner lines the interior carpet up the front, back and even up the sides of the vehicles footwell. Digital laser measurements of interior surfaces offer a consistently perfect fit. A patent pending High Density Tri Extruded material allows for a rigid core for strength while offering surface friction to the carpet, as well as tactile feel to the surface. Advanced surfacing creates channels that carry fluids and debris to a lower reservoir with further channeling to help minimize fluid movement while driving. Once fluids become trapped in the reservoir, away from shoes and clothing, they are easily removed from the WeatherTech FloorLiner over the door sill. No muss no fuss.

Product Features:

• Accurately And Completely Lines The Interior Carpet Giving Absolute Interior Protection
• Lines The Interior Carpet Up The Front, Back And Even Up The Sides Of The Vehicle Footwell
• Digital Laser Measurements Of Interior Surfaces Offer A Consistently Perfect Fit
• A Patent Pending High-Density Tri-Extruded Material Allows For A Rigid Core For Strength While Offering Surface Friction To The Carpet, As Well As Tactile Feel To The Surface
• Advanced Surfacing Creates Channels That Carry Fluids And Debris To A Lower Reservoir With Further Channeling To Help Minimize Fluid Movement While Driving
• Manufactured From A Proprietary Custom Blended TPO (Thermopolyolefin) That Is Not Only Wear Resistant, But Also Remains Flexible Under Extreme Temperatures
• Available in fronts, rears, center hump, 3rd and 4th row, and complete sets
• Available in black, tan, grey and cocoa

In the quest for the most advanced concept in floor protection, the talented designers and engineers at WeatherTech have worked tirelessly to develop the most advanced floor protection available today. The WeatherTech FloorLiner accurately and completely lines the interior carpet giving absolute interior protection . The WeatherTech FloorLiner lines the interior carpet up the front, back and even up the sides of the vehicles footwell. Digital laser measurements of interior surfaces offer a consistently perfect fit. A patent pending High Density Tri Extruded material allows for a rigid core for strength while offering surface friction to the carpet, as well as tactile feel to the surface. Advanced surfacing creates channels that carry fluids and debris to a lower reservoir with further channeling to help minimize fluid movement while driving. Once fluids become trapped in the reservoir, away from shoes and clothing, they are easily removed from the WeatherTech FloorLiner over the door sill. No muss no fuss.

Product Features:

• Accurately And Completely Lines The Interior Carpet Giving Absolute Interior Protection
• Lines The Interior Carpet Up The Front, Back And Even Up The Sides Of The Vehicles Footwell
• Digital Laser Measurements Of Interior Surfaces Offer A Consistently Perfect Fit
• A Patent Pending High Density Tri Extruded (HDTE) Material Allows For A Rigid Core For Strength While Offering Surface Friction To The Carpet, As Well As Tactile Feel To The Surface
• Advanced Surfacing Creates Channels That Carry Fluids And Debris To A Lower Reservoir With Further Channeling To Help Minimize Fluid Movement While Driving
• Manufactured From A Proprietary Custom Blended TPO (Thermopolyolefin) That Is Not Only Wear Resistant, But Also Remains Flexible Under Extreme Temperatures
• Available in fronts, rears, center hump, 3rd and 4th row, and complete sets
• Available in black, tan, grey and cocoa

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ride companions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water repellent finish that ll combat any juice box spill, cereal crumbs or pet mess. It s also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non slip bottom. Semi-custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only It is designed to fit most bench style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non Slip Bottom
• Semi-custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ridecompanions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water-repellent finish that’ll combat any juice box spill, cereal crumbs or pet mess it is also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non-slip bottom. Semi¿custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only – It is designed to fit most bench-style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non-Slip Bottom
• Semi-custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ridecompanions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water-repellent finish that’ll combat any juice box spill, cereal crumbs or pet mess it is also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non-slip bottom. Semi¿custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only – It is designed to fit most bench-style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non-Slip Bottom
• Semi-custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ridecompanions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water-repellent finish that’ll combat any juice box spill, cereal crumbs or pet mess it is also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non-slip bottom. Semi¿custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only – It is designed to fit most bench-style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non-Slip Bottom
• Semi┐custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ridecompanions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water-repellent finish that’ll combat any juice box spill, cereal crumbs or pet mess it is also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non-slip bottom. Semi¿custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only – It is designed to fit most bench-style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non Slip Bottom
• Semi┐custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ride companions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water repellent finish that ll combat any juice box spill, cereal crumbs or pet mess. It s also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non slip bottom. Semi-custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only It is designed to fit most bench style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non Slip Bottom
• Semi┐custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family “road trip warriors” or pet “car ride” companions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton twill fabric that features a durable water-repellent finish that’ll combat any juice box spill, cereal crumbs or pet mess! It’s also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non-slip bottom. Semi-custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water-Repellent Finish That’ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non-Slip Bottom
• Semi-custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ridecompanions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water-repellent finish that’ll combat any juice box spill, cereal crumbs or pet mess it is also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non-slip bottom. Semi¿custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only – It is designed to fit most bench-style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water-Repellent Finish That Will Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non-Slip Bottom
• Semi┐custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ridecompanions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water-repellent finish that’ll combat any juice box spill, cereal crumbs or pet mess it is also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non-slip bottom. Semi¿custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only – It is designed to fit most bench-style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non-Slip Bottom
• Semi┐custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ride companions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water repellent finish that ll combat any juice box spill, cereal crumbs or pet mess. It s also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non slip bottom. Semi-custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only It is designed to fit most bench style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non Slip Bottom
• Semi-custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

Dashboard Cover

Dashboard Cover

Dashboard Cover

Dashboard Cover

VelourMat Custom Dash Cover by DashMat

Dashboard Cover

Dashboard Cover

Dashboard Cover

Dashboard Cover

Dashboard Cover

Dashboard Cover

Custom Dash Cover

Dashboard Cover

Custom Dash Cover

Dashboard Cover

Limited Edition Custom Dash Cover by DashMat

Limited Edition Custom Dash Cover by DashMat

SuedeMat Custom Dash Cover by DashMat