2020 GMC Savana 4500 Wheels and Tires

Below you will find various in-demand GMC Wheels and Tires, components and accessories for your 2020 Savana 4500. Advance Auto Parts has popular Savana 4500 parts like TPMS Sensors, Wheel Seals, Wheel Studs and more. You’ll also find aftermarket and OEM Wheels and Tires for other Savana 4500 model years including 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2021, 2022 and more. Select a category of 2020 GMC Savana 4500 Wheels and Tires below and start saving instantly.

Popular 2020 GMC Savana 4500 Wheels and Tires Categories

Front Wheel Bearings

Tire Pressure Sensors

Remote Tire Pressure Sensors

Rear Wheel Bearings

Wheel Lug Nuts

Locking Wheel Lug Nuts

Rear Wheel Seals

Wheel Hubs

Wheel Studs

Tire Pressure Sensor Valves

Tire Pressure Sensor Service Kits

Essential Wheels and Tires for 2020 GMC Savana 4500s

from

$33.49

SHAFT SEAL

from

$22.29

Product Features:

Brand may vary by location

from

$1.99

Parts Kit For Chry/Gm

from

$4.49

All Continental brand TPMS parts are OE validated for fit, performance and reliability. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Pivoting valve stem for expanded wheel fitment. OE validated part identical to the dealer. Continental aftermarket TPMS sensors include all component parts for ease of installation. Waterproof sensor is impervious to tire air moisture. Then, now, and into the future, we will be there for you, our customer.

Product Features:

OE – validated part identical to the dealer
Electroless nickel-plated valve cores
Advanced anodization of valve stems and hex nuts
Includes torque specifications and installation instructions
TPMS service kits are required whenever performing tire replacement or service
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$19.99

WHEEL BALANCER CONE

from

$159.99

Driveworks Wheel hub assemblies & Bearings are integrated designed, they will meet your specific vehicle application and also provide the same or better performance, durability, and reliability you expect from OE. The inside ball or tapered bearing sealed with lifetime lubrication supports the vehicle’s rolling weight and provides a smooth and quiet rotation of the wheel. The design also enables lower total system cost, easier installation and longer service lifetime. The Wheel hub assemblies & Bearings come complete with new wheel studs, hub and bearings. The assembly also includes new ABS Wheel Sensors where applicable.

Product Features:

High quality materials ensure long service life
Integral raceway provides proper clearance between the roller and bearing riding surfaces
Precision-matched components deliver smooth and quiet operation
Broad range of designs and custom-tailored to specific applications and operating conditions
ABS Components and Bearing Preload 100% Tested To OE Specs
Premium seals, both inboard and outboard, protect the bearing
Brand may vary by location

from

$326.99

Product Features:

KEEPS WATER AND DIRT OUT — Quad lip seal design inhibits damage by keeping moisture and other contaminants out
RELIABLE PERFORMANCE — Precise roll-form design ensures consistent and optimal factory-installed preload to minimize excessive noise and wear
DAMAGE RESISTANCE — Abrasion-resistant ABS cord resists damage, contamination and vibration that may lead to premature wear
EXTENDED SERVICE LIFE — Application-specific advanced raceway design reduces stress, rotation and heat on components
CORROSION PROTECTION — Application-specific coated wheel studs resist corrosion and rust for easier removal and proper torqueing
EASY TO INSTALL — Engineered and designed for fast, hassle-free installation
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$49.99

Manufactured with premium-grade steel, National taper bearing sets feature crowned raceways and rollers to ensure even load distribution.

Product Features:

CONSISTENT PERFORMANCE — Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$19.99

Product Features:

Brand may vary by location

from

$33.99

TAPERED ROLLER BEARI

from

$129.99

Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensorÂ® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com For more information about Schrader and its products visit: www.SchraderTPMS.com

Product Features:

Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
Sensor must be programmed to specifi Y/M/M vehicle
Compatible with most programming tools
Make sure that your TPMS programming tool is updated to it’s latest version
Combines 314.9, 315 & 433 MHz application into one sensor
Future proofed to support new and pending OE system technologies
Optimizes inventory levels and returns
Reduces overal cost and increases speed of service
Use service kit 20018 to replace the rubber valve assembly
Valve Core Torque = 3.5 in-lbs (0.4 Nm)
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$7321.99

The 300050 is a convenient bulk box of 240 individually bagged Autel MX-Sensor 1-Sensors. The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Bulk Box of (240) Individually Bagged 1-Sensors with Rubber Press-in Valve
Bulk Box of 240 Individually Bagged 1-Sensors with Rubber Press-in Valve
Combined Frequency 315MHz and 433MHz
Programmable with Autel TPMS Service Tools
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Maximum Signal Strength / Battery Reliability
Maximum Signal Strength, Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$462.99

The MX-Sensor 1-Sensor Bulk Box has 20 individually bagged, programmable universal TPMS sensors. The 1-Sensor features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Bulk Box of (20) Individually Bagged 1-Sensors with Rubber Press-in Valve
Combined Frequency: 315MHz & 433MHz
Programmable with Autel TPMS Service Tools
Exclusive Press Release Button to Easily Replace Valve Stems
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Meets SAE Standards J1205 & J1206
Maximum Signal Strength / Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$19.29

Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.

Product Features:

Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts.
Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$30.49

Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts.
Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$47.99

Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts.
Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$601.99

Schrader EZ-sensor Programmable TPMS sensor headlines the TPMS product offerings from Schrader TPMS Solutions. Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com. For more information about Schrader and its products visit: www.SchraderTPMS.com

Product Features:

EZ-sensor must be programmed to specific M/M/Y vehicle
EZ-sensor Programmable TPMS sensor fits 99% of vehicles on the road
EZ-sensor can be programmed by most all TPMS programming tools on the Market
Supports 314.9, 315 and 433 MHz sensor applications
Always keep your TPMS scan and programming tool up to date with the latest software
Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
Rubber Valve can be replaced by rubber valve kit 20018 or aluminum valve kit 34000
Valve Core Torque = 3.5 in-lbs (0.4 Nm)

from

$138.99

Schrader EZ-sensor Programmable TPMS sensor headlines the TPMS product offerings from Schrader TPMS Solutions. Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com – For more information about Schrader and its products visit: www.SchraderTPMS.com

Product Features:

EZ-sensor must be programmed to specific M/M/Y vehicle
EZ-sensor Programmable TPMS sensor fits 99% of vehicles on the road
EZ-sensor can be programmed by most all TPMS programming tools on the Market
Supports 314.9, 315 and 433 MHz sensor applications
Always keep your TPMS scan and programming tool up to date with the latest software
Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
Aluminum valve can be replaced by Schrader service kit 20049
Nut Torque = 71 in-lbs
Valve Core Torque = 3.5 in-lbs

from

$48.99

REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now, and into the future we will be there for you, our customer.

Product Features:

Installs right out of the box
No sensor programing required
Works with all major TPMS scan tools
No training required – designed to follow existing OE vehicle relearn procedures
Faster TPMS scan tool hunt mode
Reduces SKUs
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$29.99

Clamp-in stem for 0.625 in. valve hole for Schrader GM, Ford, RAM.

Product Features:

Rim Hole Compatibility: 0.625 in.
Max Cold Inflation Pressure: 200psi
200 PSI maximum cold inflation pressure

from

$11.49

Kit includes four interchangeable metal valve stems. The patented press release valve design allows interchangeable rubber and metal valves to be easily replaced in the same sensor head by hand, with no valve fitting tool required. Simply click in and press out. Installing TPMS sensors has never been so easy.

Product Features:

Four Metal Valve Stems
Press-in interchangeable metal valve stem
Designed with industry leading corrosion protection technology, Autel metal valves are built to match or exceed OE tire valves.
Press release valve design allows easy installation without a tool for sensor head fitting
High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing

from

$3.49

Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:

DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change

from

$2.99

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Product Features:

Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$3.99

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Product Features:

Durable material – carbon steel meets SAE automotive industry standards for strength and hardness.
Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$55.66

When it comes to your wheels, don’t take chances. Dorman’s Wheel Studs are produced to strict engineering quality standards. Dorman’s engineers design these parts with tight tolerance on specific part characteristics to ensure proper fit and function, this design provides assurance your wheels will be tight every time they are removed and installed.

Product Features:

Direct replacement for a proper fit every time
Corrosion resistant
Double-ended studs as well as serrated bolts, and wheel bolts available
Over-length and under-length studs available for convenience and ease of installation

from

$39.99

Exclusive design – these premium lug nuts feature an authentic racing style look with knurled surfaces to help grip.
Quality materials – made of tough steel for durability and positive tool contact
Cost-effective solution – offers the high-performance look of titanium racing hardware at a competitive price
Quality tested – these lug nuts have undergone try-on, corrosion and material testing to ensure a quality fit and long service life

from

$4.03

Dorman’s Wheel Nuts are designed and constructed to strict engineering quality standards. All of Dorman’s Wheel Nuts are manufactured with high corrosion resistance to combat rust in any environment. Available in multiple styles and finishes, they match the original to blend in with the overall aesthetic design of your car. Chrome upgrade nuts are also available in multiple styles and colors to enhance the look of your wheels.

Product Features:

Wheel nut covers also available
Easy to install
Available in different quantities and packaging options
Chrome wheel nut and lock kits available (where applicable)

from

$3.79

These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:

Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Upgrade your 2020 GMC Savana 4500 with Top-Quality Wheels and Tires

When it comes to maintaining or upgrading your 2020 GMC Savana 4500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Wheels and Tires are key to keeping your Savana 4500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 46 Wheels and Tires for the 2020 GMC Savana 4500, designed to meet your needs without breaking the bank. From TPMS Sensor replacements to Wheel Seals upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Wheels and Tires for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Wheels and Tires for your 2020 GMC Savana 4500 at great prices. Our Wheels and Tires inventory for this model ranges from just $2.82 to $7,321.99, with an average price of $221.54. Our 46 Wheels and Tires in stock come from 10 trusted brands, so you’re sure to find the right part for your 2020 GMC Savana 4500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2020 GMC Savana 4500, we stock popular OEM and aftermarket Wheels and Tires from top names like Dorman, VDO, Autel, and more. Dorman Wheels and Tires start at just $2.82 and boast an impressive 4 stars average rating from customers. VDO and Autel also bring quality to the table, with Wheels and Tires available starting at $4.99, and at an average 4 stars rating. With 468 customer reviews and counting, our 2020 GMC Savana 4500 Wheels and Tires have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Wheels and Tire upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2020 GMC Savana 4500 is always ready to roll. We’re committed to providing you with everything you need to keep your Savana 4500 in top shape, all in one place. Start shopping confidently below for your 2020 GMC Savana 4500!

Best-Selling TPMS Sensors for 2020 GMC Savana 4500s

Enhance the driving experience in your GMC with 17 quality TPMS Sensor components, starting at $4.99.

show more show less

from

$49.99

Installs right out of the box
No sensor programing required
Works with all major TPMS scan tools
No training required – designed to follow existing OE vehicle relearn procedures
Faster TPMS scan tool hunt mode
Reduces SKUs
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$48.99

Installs right out of the box
No sensor programing required
Works with all major TPMS scan tools
No training required – designed to follow existing OE vehicle relearn procedures
Faster TPMS scan tool hunt mode
Reduces SKUs
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$11.49

The MXSensorRVK is a box of four press-in rubber valve stems. They are compatible with Autel 1-Sensors & Autel 315MHz & 433 MHz MX-Sensors.

Product Features:

Includes 4 Rubber Press-in Valve Stems
Compatible with Autel 1-Sensors
Compatible with Autel 315MHz & 433MHz MX-Sensors
Warranty on Material and Workmanship
High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing

from

$41.99

The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Combined Frequency: 315MHz & 433MHz
Programmable with Autel TPMS Service Tools
Exclusive Press Release Button to Easily Replace Valve Stems
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Meets SAE Standards J1205 & J1206
Maximum Signal Strength / Battery Reliability
100% ID clone-able with no relearn required
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$11.49

Four Metal Valve Stems
Press-in interchangeable metal valve stem
Designed with industry leading corrosion protection technology, Autel metal valves are built to match or exceed OE tire valves.
Press release valve design allows easy installation without a tool for sensor head fitting
High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing

CV-001 Black Metal Press-in Valve for 1-Sensor

from

$5.49

The CV-001 is a black metal press-in valve stem for the 1-Sensor.

Product Features:

Black Metal Press-in Valve Stem
Compatible with Autel 1-Sensor

from

$462.99

Bulk Box of (20) Individually Bagged 1-Sensors with Rubber Press-in Valve
Combined Frequency: 315MHz & 433MHz
Programmable with Autel TPMS Service Tools
Exclusive Press Release Button to Easily Replace Valve Stems
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Meets SAE Standards J1205 & J1206
Maximum Signal Strength / Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$7321.99

Bulk Box of (240) Individually Bagged 1-Sensors with Rubber Press-in Valve
Bulk Box of 240 Individually Bagged 1-Sensors with Rubber Press-in Valve
Combined Frequency 315MHz and 433MHz
Programmable with Autel TPMS Service Tools
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Maximum Signal Strength / Battery Reliability
Maximum Signal Strength, Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$525.99

Product Features:

Bulk Box of (20) Individually Bagged 1-Sensors with Metal Press-in Valve
Combined Frequency: 315MHz & 433MHz
Programmable with Autel TPMS Service Tools
Exclusive Press Release Button to Easily Replace Valve Stems
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Meets SAE Standards J1205 & J1206
Maximum Signal Strength / Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$104.99

GM Genuine Parts Tire Pressure Monitoring Sensors (TPMS) are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are battery powered sensors located in the tire that monitor the vehicle’s tire pressure and warn the driver when pressure falls more than 25% below the manufacturer’s recommendations (normally through a slow pressure loss). The sensor is connected with the valve stem and, by way of Radio Frequency (RF) technology, sends pressure updates to the vehicle’s on-board computer. Tire pressure is displayed on the vehicle’s Driver Information Center (DIC) or, when low, a warning light may be illuminated to warn the driver. U.S. Federal Regulations require that new cars and light trucks be equipped with TPMS starting in 2008. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Battery is made to last up to 10 years of normal use
Designed to communicate perfectly with your GM vehicle’s TPMS Module
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$53.99

REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now and into the future we will be there for you, our customer.

Product Features:

Metal clamp-in stem.
Works with most major TPMS Scan tools
Reduces SKUs
OE Designed and Validated
Advance anodization of valve stems and hex nuts
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$53.99

REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now and into the future we will be there for you, our customer.

Product Features:

Rubber clamp-in stem.
Works with most major TPMS Scan tools
Reduces SKUs
OE Designed and Validated
Advance anodization of valve stems and hex nuts
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$44.49

The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 & J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Combined Frequency: 315MHz and 433MHz
Programmable with Autel TPMS Service Tools
Exclusive Press Release Button to Easily Replace Valve Stems
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Meets SAE Standards J1205 & J1206
Maximum Signal Strength / Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$43.99

The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum screw-in valve stems. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 & J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Maximum Signal Strength, Battery Reliability.
15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
Combined Frequency – 315MHz and 433MHz
Programmable with Autel TPMS Service Tools
Program to Replace 99 Percent of OE Sensors
Meets SAE Standards J1205 and J1206
Maximum Signal Strength, Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$41.99

The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber screw-in valve stems. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Maximum Signal Strength, Battery Reliability.
15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
Combined Frequency – 315MHz and 433MHz
Programmable with Autel TPMS Service Tools
Program to Replace 99 Percent of OE Sensors
Meets SAE Standards J1205 and J1206
Maximum Signal Strength, Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

Chrome Metal Press-in Valve for 1-Sensor

from

$7.99

The CV-003 is a chrome metal press-in valve stem for the 1-Sensor. It comes with a warranty on material and workmanship.

Product Features:

Chrome Grey Metal Press-in Valve Stem
Compatible with Autel 1-Sensor
Warranty on Material and Workmanship

CV-002 Titan Grey Metal Press-in Valve for 1-Sensor

from

$4.99

The CV-002 is a titan grey metal press-in valve stem for the 1-Sensor.

Product Features:

Titan Grey Metal Press-in Valve Stem
Compatible with Autel 1-Sensor

Most Popular 2020 GMC Savana 4500 Wheel Seals

Customize your GMC with 4 Wheel Seals products like Rear Wheel Seals, all priced under $57.55.

show more show less

from

$22.29

Product Features:

Brand may vary by location

from

$57.55

ACDelco GM Original Equipment Wheel Seals are high quality seals and a GM-recommended replacement component. This original equipment wheel seal is engineered to fit your specific GM vehicle and will provide the same performance, durability, and service life you expect from General Motors.

Product Features:

High quality materials ensure long service life
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$34.37

Wheel Seal

from

$34.33

Wheel Seal

Top Picks for 2020 GMC Savana 4500 Wheel Studs

Upgrade GMC Savana 4500s with top-quality Wheel Studs parts, including 4 OEM and aftermarket selections for your 2020 model.

show more show less

from

$14.74

Wheel Stud

from

$55.66

Direct replacement for a proper fit every time
Corrosion resistant
Double-ended studs as well as serrated bolts, and wheel bolts available
Over-length and under-length studs available for convenience and ease of installation

from

$5.27

Direct replacement for a proper fit every time
Corrosion resistant
Double-ended studs as well as serrated bolts, and wheel bolts available
Over-length and under-length studs available for convenience and ease of installation

from

$2.82

Direct replacement for a proper fit every time
Corrosion resistant
Double-ended studs as well as serrated bolts, and wheel bolts available
Over-length and under-length studs available for convenience and ease of installation

In-Demand Wheel Bearings for 2020 GMC Savana 4500s

Select from 6 premium Wheel Bearings parts for your 2020 GMC Savana 4500, with prices ranging from $16.79 to $257.44.

show more show less

from

$19.99

Product Features:

Brand may vary by location

from

$257.44

WHEEL HUB ASSEMBLY

from

$257.05

WHEEL HUB

from

$118.14

Differential Bearing

from

$86.41

WHEEL BEARING

from

$16.79

Product Features:

Brand may vary by location

Most Sold 2020 GMC Savana 4500 Wheel Hardware

Explore our best-selling GMC parts for the 2020 Savana 4500 among 13 OEM and aftermarket options starting from $3.79.

show more show less

from

$8.29

Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles.
Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$16.29

Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts.
Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$3.79

Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$4.99

Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$30.49

Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts.
Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$21.99

Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts.
Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$19.29

Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts.
Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$38.99

Upgrade the look of your wheel hardware with these racing-inspired lug nuts. Designed with an open end to accommodate long studs, these nuts are finished with a knurled texture for better grip when spinning them by hand. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.

Product Features:

Black Open End Knurled Wheel Nuts.
Wheel Lug Nut: M14-1.50 Thread, Conical 60, Duplex Acorn, 48 mm Length, Black, 20 Pack
Exclusive design – these premium lug nuts feature an authentic racing style look with knurled surfaces to help grip
Quality materials – made of tough steel for durability and positive tool contact

from

$60.99

Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$47.99

Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts.
Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$39.99

Exclusive design – these premium lug nuts feature an authentic racing style look with knurled surfaces to help grip.
Quality materials – made of tough steel for durability and positive tool contact
Cost-effective solution – offers the high-performance look of titanium racing hardware at a competitive price
Quality tested – these lug nuts have undergone try-on, corrosion and material testing to ensure a quality fit and long service life

from

$38.99

Red Open End Knurled Wheel Nuts.
Wheel Lug Nut: M14-1.50 Thread, Conical 60, Bulge Open End, 48 mm Length, Red; Chrome, 20 Pack
Exclusive design – these premium lug nuts feature an authentic racing style look with knurled surfaces to help grip
Quality materials – made of tough steel for durability and positive tool contact

from

$28.54

Lug Nut

Top-Rated Wheels and Tires Brands For Your 2020 GMC Savana 4500

Shop for the best-rated brands offering Wheels and Tires and other products for your 2020 GMC Savana 4500s. Below you’ll find some of our best rated Wheels and Tires from Dorman, VDO, and Autel, and more. Wheels and Tires from these brands that fit a 2020 Savana 4500 start at just $2.82 and are rated as high as 4 stars. OEM and aftermarket Wheels and Tires don’t get more top quality, durable, and affordable than from the brands below.

Popular Dorman 2020 GMC Savana 4500 Wheels and Tires

When it comes to maintaining or upgrading your 2020 GMC Savana 4500, using quality Wheels and Tires is essential to ensure durability and a perfect fit. Dorman ticks all of those boxes. We offer a wide selection of Dorman Wheels and Tires, specifically designed for the 2020 GMC Savana 4500. With over 17 Dorman brand Wheels and Tires in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $2.82, with an average price of just $25.83. Plus, with over 31 customer reviews and an average rating of 4 stars, you can trust that our Dorman Wheels and Tires will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$3.79

This product is not rated

Wheel Lug Nut: M14-1.50 External Thread, Conical 60, Thread, 1.122" L, Yellow; Zinc Plated (Sold by each)

“”

from
$30.49

This product is not rated

Wheel Lug Nut Lock Set: M14-1.50 Thread, Conical 60, Tuner, 1.43" Length, Chrome, 4 Locks/1 Key

“”

from
$4.99

This product is not rated

Wheel Lug Nut: M14-1.50 Thread, Flanged, 1.339" Length, Black (Sold by each)

“”

Popular VDO 2020 GMC Savana 4500 Wheels and Tires

VDO auto parts is one of the highest quality Wheels and Tire brands in the market. Any 2020 GMC Savana 4500 owner should feel confident when installing genuine VDO parts in their vehicle. To ensure the best fit and performance for your 2020 Savana 4500, Advance Auto Parts carries a full inventory of 2 VDO Wheels and Tires. Plus you will be keeping your GMC in peak condition while saving money because prices on these VDO Wheels and Tires range from $48.99 to $49.99, plus, with more than 80 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Wheels and Tires below will deliver on both quality and value.

from
$49.99

(26)

VDO Rubber Snap-in Stem REDI-Sensor

“The replacement battery is nice. I am purchasing one pre pay, until I have the other three. They aren’t cheap, but worth double the price. The tire gu”

from
$48.99

(54)

VDO Metal Clamp-in Stem REDI-Sensor

“It works perfectly !
Will buy again for my Acura MDX
Thanks to advanceautoparts.”

FAQs for 2020 GMC Savana 4500 Wheels and Tires

Which Wheels and Tires are best-sellers for 2020 GMC Savana 4500s?

Out of 46 Wheels and Tires that fit 2020 GMC Savana 4500s, the following parts are the top sellers:

MX-Sensor 1-Sensor (Rubber) (11784373) – $41.99
Wheel Lug Nut: M14-1.50 External Thread, Conical 60, Thread, 1.122" L, Yellow; Zinc Plated (Sold by each) (21290558) – $3.79
Wheel Lug Nut: M14-1.50 Thread, Conical 60, Bulge Open End, 0.832" Length, Chrome, 4 Pack (22148359) – $8.29

What’s the price range for 2020 GMC Savana 4500 Wheels and Tires?

Wheels and Tire prices for the 2020 GMC Savana 4500 start at $2.82 and go up to $7,321.99 for the most premium parts.

What’s the average price of a Wheels and Tire for a 2020 GMC Savana 4500?

The average price for Wheels and Tires for the 2020 GMC Savana 4500 is $221.54. Keep in mind the variety of part types within our Wheels and Tire category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Wheels and Tires for other GMC Savana 4500 model years?

Yes, we currently carry Wheels and Tires for 15 model years of GMC Savana 4500s between 2009 and 2024. Wheels and Tires are bought most frequently for the following model years: 2022, 2021, 2019, 2018, 2017, 2016, 2015, 2014, and 2013.

What are the cheapest Wheels and Tires for my 2020 GMC Savana 4500?

The cheapest 2020 GMC Savana 4500 Wheels and Tires we carry in stock are:

Serrated Wheel Stud (11946886) – $2.82
Wheel Lug Nut: M14-1.50 External Thread, Conical 60, Thread, 1.122" L, Yellow; Zinc Plated (Sold by each) (21290558) – $3.79
TPMS Service Kit, REDI-Sensor and OE Style (10568111) – $4.49
Wheel Lug Nut: M14-1.50 Thread, Flanged, 1.339" Length, Black (Sold by each) (22972724) – $4.99
CV-002 Titan Grey Metal Press-in Valve for 1-Sensor (12452609) – $4.99

What are the top-rated Wheels and Tires that fit the 2020 GMC Savana 4500?

Out of 468 reviews by customers, our 2020 GMC Savana 4500 Wheels and Tires have an average customer rating of . These are some of the highest-rated Wheels and Tire types for the 2020 GMC Savana 4500 and their top-rated products:

TPMS Sensor Kits
- TPMS Service Kit, REDI-Sensor and OE Style (10568111) – $4.49

What types of Wheels and Tires do you sell for my 2020 GMC Savana 4500?

As of 2/5/25, these are some of the most in-demand types of Wheels and Tires for a 2020 GMC Savana 4500:

Can I get help with 2020 GMC Savana 4500 Wheels and Tire orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Wheels and Tires and more.

What is your return policy for GMC Savana 4500 Wheels and Tires?

Advance Auto Parts keeps returns simple. For new GMC Savana 4500 Wheels and Tires and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2020 GMC Savana 4500 Wheels and Tires

FAG US – SHAFT SEAL (Part No.SS3301)

Driveworks – Wheel Seal (Part No.S-710568)

Xtra Seal – Parts Kit For Chry/Gm (Part No.15-20201)

REDI-Sensor – TPMS Service Kit, REDI-Sensor and OE Style (Part No.SE54190)

FAG US – WHEEL BALANCER CONE (Part No.KLM104949)

Driveworks – Wheel Hub Assembly (Part No.NT515059)

MOOG Hub Assemblies – Wheel Bearing and Hub Assembly: Front, 8 Studs (Part No.515190)

National – Wheel Bearing: Direct Fit, 1 Piece (Part No.A-46)

Driveworks – Tapered Roller Bearing (Part No.S-A-46)

FAG US – TAPERED ROLLER BEARI (Part No.K387AS-382A)

Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 4 Piece (Part No.33500-4)

Autel – MX-Sensor 1-Sensor Bulk Box 240 (Part No.300050)

Autel – MX-Sensor 1-Sensor Bulk Box (20) (Part No.300010)

Dorman – Wheel Lug Nut Lock Set: M14-1.50 Thread, Conical 60, Duplex Acorn, 2.05" L, Chrome, 4 Locks/1 Key (Part No.711-624)

Dorman – Wheel Lug Nut Lock Set: M14-1.50 Thread, Conical 60, Tuner, 1.43" Length, Chrome, 4 Locks/1 Key (Part No.712-681)

Dorman – Wheel Lug Nut Lock Set: M14-1.50 Thread, Conical 60, Bulge, 36 mm Length, Chrome, 4 Locks/1 Key (Part No.712-628)

Schrader – EZ-sensor Programmable TPMS Sensor with Rubber Snap-in Valve, 24 Pack (Part No.33500-24BU)

Schrader – EZ-sensor Programmable TPMS Sensor with Rubber Snap-in Valve – 24 Pack (Part No.33700-4)

VDO REDI-Sensor – VDO Metal Clamp-in Stem REDI-Sensor (Part No.SE10001HP)

Dill Air Control – Clamp-In TPMS Service Kit: Metal, 0.625 Inch Nickel Plated Valve Stem, 1 Piece (Part No.VS-919)

Autel – Box of 4 Metal Press-in Valve Stems for 1-Sensor (Part No.MXSENSORMVK)

Schrader – TPMS Sensor Service Kit (Part No.20008)

Dorman – Wheel Stud: Serrated, M14-1.50 Thread Size, Right Hand Thread (Sold by each) (Part No.610-428)

Dorman – Wheel Stud: Serrated, M14-1.50 Thread Size, Right Hand Thread (Sold by each) (Part No.610-431)

Dorman – Serrated Wheel Stud (Part No.O8060833069DOR)

Dorman – Wheel Lug Nut: M14-1.50 Thread, Conical 60, Bulge Open End, 48 mm Length, Ti-Blue Chrome, 20 Pack (Part No.713-685T)

Dorman – Wheel Lug Nut (Part No.O8030832161DOR)

Dorman – Wheel Lug Nut: M14-1.50 External Thread, Conical 60, Thread, 1.122" L, Yellow; Zinc Plated (Sold by each) (Part No.611-115)

VDO REDI-Sensor – VDO Rubber Snap-in Stem REDI-Sensor (Part No.SE10001HPR)

VDO REDI-Sensor – VDO Metal Clamp-in Stem REDI-Sensor (Part No.SE10001HP)

Autel – Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves. (Part No.MXSENSORRVK)

Autel – MX-Sensor 1-Sensor (Rubber) (Part No.1-SENSOR)

Autel – Box of 4 Metal Press-in Valve Stems for 1-Sensor (Part No.MXSENSORMVK)

Autel – CV-001 Black Metal Press-in Valve for 1-Sensor (Part No.CV-001)

Autel – MX-Sensor 1-Sensor Bulk Box (20) (Part No.300010)

Autel – MX-Sensor 1-Sensor Bulk Box 240 (Part No.300050)

Autel – MX-Sensor 1-SensorM Bulk Box (20) (Part No.300060)

GM Genuine Parts – Tire Pressure Indicator Sensor (Part No.13540600)

REDI-Sensor – REDI-Sensor Metal Clamp-in Stem 315 MHz — 1 Sensor (Part No.SE10007)

REDI-Sensor – REDI-Sensor Rubber Snap-in Stem 315 Mhz — 1 Sensor (Part No.SE10006)

Autel – 1 Boxed MX-Sensor 1-Sensor Press-in Aluminum Valve Stem (Part No.1-SENSORM)

Autel – Adjustable Angle Programmable Universal TPMS Sensor Metal – 315MHz and 433MHz (Part No.300030)

Autel – Adjustable Angle 1-Sensor Rubber (Part No.300020)

Autel – Chrome Metal Press-in Valve for 1-Sensor (Part No.CV-003)

Autel – CV-002 Titan Grey Metal Press-in Valve for 1-Sensor (Part No.CV-002)

Driveworks – Wheel Seal (Part No.S-710568)

ACDelco – GM Original Equipment Wheel Bearing Seal (Part No.K8010285632ACD)

SKF – Wheel Seal (Part No.K8010465771SKF)

Autopart International Inc – Wheel Seal (Part No.K80101965499API)

Dorman – Wheel Stud (Part No.O8060833055DOR)

Dorman – Serrated Wheel Stud (Part No.O8060833069DOR)

Dorman – Serrated Wheel Stud (Part No.O8060833070DOR)

Dorman – Serrated Wheel Stud (Part No.O8060833056DOR)

Driveworks – Tapered Roller Bearing (Part No.S-A-46)

Autopart International Inc – WHEEL HUB ASSEMBLY (Part No.K70013359742API)

Worldpac – WHEEL HUB (Part No.K7000337410ACD)

ACDelco – Differential Bearing (Part No.J7060201564ACD)

Worldpac – WHEEL BEARING (Part No.K8000205983ACD)

Driveworks – Tapered Roller Bearing (Part No.S-A-47)

Dorman – Wheel Lug Nut: M14-1.50 Thread, Conical 60, Bulge Open End, 0.832" Length, Chrome, 4 Pack (Part No.711-606)

Dorman – Wheel Lug Nut Lock Set: M14-1.50 Thread, Conical 60, Duplex Acorn, 1.42" L, Chrome, 4 Locks/1 Key (Part No.711-621)

Dorman – Wheel Lug Nut: M14-1.50 External Thread, Conical 60, Thread, 1.122" L, Yellow; Zinc Plated (Sold by each) (Part No.611-115)

Dorman – Wheel Lug Nut: M14-1.50 Thread, Flanged, 1.339" Length, Black (Sold by each) (Part No.611-202)

Dorman – Wheel Lug Nut Lock Set: M14-1.50 Thread, Conical 60, Tuner, 1.43" Length, Chrome, 4 Locks/1 Key (Part No.712-681)

Dorman – Wheel Lug Nut Lock Set: M14-1.50 Thread, Conical 60, Acorn, 35.8 mm Length, Chrome, 5 Locks/1 Key (Part No.712-628.5)

Dorman – Wheel Lug Nut Lock Set: M14-1.50 Thread, Conical 60, Duplex Acorn, 2.05" L, Chrome, 4 Locks/1 Key (Part No.711-624)

Dorman – Wheel Lug Nut: M14-1.50 Thread, Conical 60, Duplex Acorn, 48 mm Length, Black, 20 Pack (Part No.713-685A)

Dorman – Black Chrome Spline Drive Lock Set M14-1.50 (Part No.711-656)

Dorman – Wheel Lug Nut Lock Set: M14-1.50 Thread, Conical 60, Bulge, 36 mm Length, Chrome, 4 Locks/1 Key (Part No.712-628)

Dorman – Wheel Lug Nut: M14-1.50 Thread, Conical 60, Bulge Open End, 48 mm Length, Ti-Blue Chrome, 20 Pack (Part No.713-685T)

Dorman – Wheel Lug Nut: M14-1.50 Thread, Conical 60, Bulge Open End, 48 mm Length, Red; Chrome, 20 Pack (Part No.713-685E)

Dorman – Lug Nut (Part No.O8030832259DOR)