2020 GMC Savana 4500 Valve Cover and Cylinder Heads

Essential 2020 GMC Savana 4500 Valve Cover and Cylinder Heads

ACDelco – GM Original Equipment Engine Coolant Temperature Sensor (Part No.C6020409594ACD)

GM Original Equipment Engine Coolant Temperature Sensor

from

$62.10
The ACDelco GM Original Equipment Engine Coolant Temperature Sensor monitors the engine temperature, and is a GM-recommended replacement for your vehicle’s original component. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. This original equipment engine coolant temperature sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Undergo the same stringent testing process as the original part
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

GM Genuine Parts – Gen III/IV Lifter Guide (Part No.12595365)

Gen III/IV Lifter Guide

from

$14.99
GM Genuine Parts Engine Valve Lifter Guide are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dorman – Cylinder Deactivation Manifold (Part No.917-162XD)

Cylinder Deactivation Manifold

from

$326.99
This engine valve lifter oil manifold matches the fit and function of the original oil distribution and solenoid assembly and is designed to help restore the proper operation of the cylinder deactivation system on specified vehicles.

Product Features:
  • Upgraded design – this cylinder deactivation manifold has enhanced features to match the fit, function and performance of the factory part on certain vehicles
  • Improved seals – increased sealing surface interface, redesigned rod sub-assembly, and superior quality O-rings and gasket
  • Reliable operation – internal bore step incorporates a radius edge to prevent valve sticking
  • Durable construction – solenoid rod hardened to improve wear resistance and maintain tighter tolerances
See More

MAHLE Original – Cylinder Head Gasket L/H (Part No.54597)

Cylinder Head Gasket L/H

from

$119.99
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • Cylinder head gaskets are sold individually and may require new head bolts based on application.
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Victor Reinz – Engine Cylinder Head Gasket (Part No.61-37120-00)

Engine Cylinder Head Gasket

from

$141.99
For secure, lasting macro and micro sealing, and protection against fuel, oil, water, and anti-freeze, Victor Reinz cylinder head gaskets deliver optimal service. Victor Reinz gaskets deliver OE proven strength and resistance to extreme temperatures and high-combustion pressures, and Victor Reinz engineers choose the most effective materials and designs from the global resources of Dana Incorporated.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
  • Multi-Layer steel construction
  • Patented Wave-Stopper┐ combustion seal
  • Wave-Stopper┐ feature distributes bolt load evenly across combustion seal
See More

Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26402 PT)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

from

$102.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING — Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
  • UNIQUE COMBUSTION SEAL — Exclusive LaserWeld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
  • MULTI-LAYERED STEEL CONSTRUCTION — Multiple layers of stainless steel maintain sealing stress and accommodate head lift
  • SUPERIOR SEAL — Precise embossed sealing beads at all vital areas to eliminate leak paths
  • HANDLES EXTREME ENGINE CONDITIONS — Engineered and manufactured to inhibit over-compression of embossments to maintain a superior seal under peak combustion pressures and temperatures
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

MAHLE Original – HEAD GASKET – RIGHT (Part No.54582)

HEAD GASKET - RIGHT

from

$114.99
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • Cylinder head gaskets are sold individually and may require new head bolts based on application.
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

MAHLE Original – Cylinder Head Gasket R/H (Part No.54598)

Cylinder Head Gasket R/H

from

$129.99
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • Cylinder head gaskets are sold individually and may require new head bolts based on application.
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26406 PT)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

from

$93.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Victor Reinz – Engine Cylinder Head Gasket (Part No.61-36460-10)

Engine Cylinder Head Gasket

from

$119.99
For secure, lasting macro and micro sealing, and protection against fuel, oil, water, and anti-freeze, Victor Reinz cylinder head gaskets deliver optimal service. Victor Reinz gaskets deliver OE proven strength and resistance to extreme temperatures and high-combustion pressures, and Victor Reinz engineers choose the most effective materials and designs from the global resources of Dana Incorporated.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26192 PT)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

from

$87.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING — Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
  • UNIQUE COMBUSTION SEAL — Exclusive LaserWeld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
  • MULTI-LAYERED STEEL CONSTRUCTION — Multiple layers of stainless steel maintain sealing stress and accommodate head lift
  • SUPERIOR SEAL — Precise embossed sealing beads at all vital areas to eliminate leak paths
  • HANDLES EXTREME ENGINE CONDITIONS — Engineered and manufactured to inhibit over-compression of embossments to maintain a superior seal under peak combustion pressures and temperatures
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Dorman – Valve Covers: Direct Replacement, Aluminum, Passenger Side (Part No.264-994)

Valve Covers: Direct Replacement, Aluminum, Passenger Side

from

$111.99
This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.

Product Features:
  • Direct replacement – this valve cover matches the original equipment part for fit and function
  • Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
  • Cost-effective solution – offers original equipment performance at competitive price
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service
See More

Dorman – Valve Covers: With Gasket, Direct Replacement, Aluminum, Driver Side (Part No.264-969)

Valve Covers: With Gasket, Direct Replacement, Aluminum, Driver Side

from

$92.99
This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.

Product Features:
  • Direct replacement – this valve cover matches the original equipment part for fit and function
  • Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
  • Cost-effective solution – offers original equipment performance at competitive price
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service
See More

Spartan – Engine Cylinder Head; Chev 6.6 06-10 DRMX Head (Part No.2CX7)

Engine Cylinder Head; Chev 6.6 06-10 DRMX Head

from

$1134.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:
  • All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
  • All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • All threads and machined surfaces are and repaired with technology that exceeds the original metal
  • Non-sealing iron surfaces painted to prevent oxidization
See More

Spartan – Engine Cylinder Head; Chev 6.6 10-16 Duramx Head (Part No.2CX10)

Engine Cylinder Head; Chev 6.6 10-16 Duramx Head

from

$1125.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:
  • All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
  • All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • All threads and machined surfaces are and repaired with technology that exceeds the original metal
  • Non-sealing iron surfaces painted to prevent oxidization
See More

Spartan – Engine Cylinder Head; Chev 6.0/6.2 07-09 Cyl Head (Part No.2CT11)

Engine Cylinder Head; Chev 6.0/6.2 07-09 Cyl Head

from

$622.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:
  • All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
  • All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • All threads and machined surfaces are and repaired with technology that exceeds the original metal
  • Non-sealing iron surfaces painted to prevent oxidization
See More

Spartan – Engine Cylinder Head; GM 6.0/6.2 10-19 OHV Head (Part No.2CT13)

Engine Cylinder Head; GM 6.0/6.2 10-19 OHV Head

from

$651.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:
  • All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
  • All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • All threads and machined surfaces are and repaired with technology that exceeds the original metal
  • Non-sealing iron surfaces painted to prevent oxidization
See More

2020 GMC Savana 4500 Valve Cover and Cylinder Heads

Maybe you’re in the middle of a full rebuild of that 2020 GMC Savana 4500. Maybe you just need a couple of Valve Cover and Cylinder Heads. Either way, Advance Auto Parts has 7 different Valve Cover and Cylinder Heads in our inventory ranging from $14.99 to $986.99. That means you can find the exact parts or products you need to keep that 2020 GMC Savana 4500 running smoothly.

Valve Cover and Cylinder Heads are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 2020 GMC Savana 4500. Dorman, Felpro, and GM Genuine are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Valve Cover and Cylinder Heads for your 2020 GMC Savana 4500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Valve Cover and Cylinder Heads to keep your 2020 GMC Savana 4500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Valve Cover and Cylinder Heads Brands To Make Your 2020 GMC Savana 4500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2020 GMC Savana 4500 demands trusted brand parts and products to keep it running. Many trusted brands of Valve Cover and Cylinder Heads make up Advance Auto Parts’ inventory, and all are ready to help make your Savana 4500 the best it can be. Be sure to browse some of our top Valve Cover and Cylinder Heads brands and parts.

FAQs for 2020 GMC Savana 4500 Valve Cover and Cylinder Heads

What are the most purchased Valve Cover and Cylinder Heads for the 2020 GMC Savana 4500?

Out of 7 Valve Cover and Cylinder Heads for the 2020 GMC Savana 4500, the most popular in our inventory are:
Gen III/IV Lifter Guide
from $14.99
This product is not rated
Gen III/IV Lifter Guide
Engine Valve Lifter Guides
GM Original Equipment Engine Coolant Temperature Sensor
from $62.10
This product is not rated
GM Original Equipment Engine Coolant Temperature Sensor
Cylinder Head Temperature Sensors