2020 Ford Mustang Drivetrains
Find Your Specific 2020 Ford Mustang Drivetrains
Below you will find various in-demand Ford Drivetrains, components and accessories for your 2020 Mustang. Advance Auto Parts has popular Mustang parts like Drive Shafts and Axles, Differentials, Universal Joints and more. You’ll also find aftermarket and OEM Drivetrains for other Mustang model years including
2014,
2015,
2016,
2017,
2018,
2019,
2021,
2022,
2023 and more. Select a category of 2020 Ford Mustang Drivetrains below and start saving instantly.
Popular 2020 Ford Mustang Drivetrains Categories
Essential Drivetrains for 2020 Ford Mustangs
Motive Gear – Differential Bearing Kit – Koyo (Part No.R8.8R)
from
$108.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- KIT BRG.&SEAL FORD 8.8
Motive Gear – Differential Master Bearing Kit – Timken (Part No.R9R28MKT)
from
$125.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- MASTER KIT FORD 9″ 28 SPL.
Motive Gear – Performance Differential Ring and Pinion (Part No.F880411)
Richmond Gear – RngPnn (Part No.69-0369-1)
from
$577.99
RngPnn
Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)
from
$14.49
Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)
from
$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil
MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.232)
from
$36.99
Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
- CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
- STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Driveworks – Universal Joint (Part No.DW-270)
from
$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
USA Standard Gear – 9" Ford Pinion Kit, Koyo Bearings (Part No.60002)
from
$124.99
9″ Ford pinion kit, Koyo bearings.
Product Features:
See More
Product Features:
- Fits Ford 9″
- Uses Koyo bearings and races
- Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
USA Standard Gear – Pinion Installation Kit For ’09 & Down Ford 8.8 (Part No.60009)
from
$119.99
8.8″ FORD 09 & DWN PINION KIT .
Product Features:
See More
Product Features:
- Fits 2009 and down Ford 8.8″
- Uses Koyo bearings and races
- Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
Pro-King – Differential Pinion Shim Kit (Part No.763A203)
from
$11.79
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Yukon Gear – Pinion Depth Shims For Ford 8" (Part No.55055)
Pro-King – Differential Pinion Shim Kit (Part No.742G200A)
from
$18.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Spicer – Universal Joint (Part No.5-1310X)
from
$35.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
Spicer – Universal Joint (Part No.5-178X)
from
$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Driveworks – Universal Joint (Part No.DW-331BL)
from
$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
Carquest Premium – C/V Axle (Part No.NCV717151)
from
$169.99
C/V Axle
Carquest Premium – C/V Axle (Part No.NCV717161)
from
$173.99
C/V Axle
Motive Gear – Differential Pinion Nut (Part No.379570S)
from
$6.49
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More
Yukon Gear – 9" Ford Pinion Nut, 35 Spline Large Pinion Oversize (Part No.33161)
from
$26.99
9″ Ford pinion nut, 35 spline Large pinion oversize.
Product Features:
See More
Product Features:
- Pinion nut
- Fits Ford 9″ with 35 spline pinion
Yukon Gear – Differential Pinion (Part No.33577)
from
$44.99
Differential Pinion
Yukon Gear – Ford 8" & 9" Standard Open, Ag, & Detroit Locker Ring Gear Bolt (Part No.33043)
from
$5.99
Ford 8″ & 9″ standard Open, AG, & Detroit locker ring gear bolt, 1.0″ long, Ford.
Product Features:
See More
Product Features:
- Ring gear bolt for Ford 8″ and 9″
- For use with standard open carrier, Auburn Gear limited slip and Detroit Locker
- 1.0″ long
Motive Gear – Ring Gear Bolt (Part No.F75Z4216AA)
ARP Auto Racing – For Use With Ford 8.8 And 9" Using 3/4"Socket, 0.75"L Under Head, 7/16"-20 (Part No.250-3003)
from
$34.99
The tremendous shock loads generated at launch by most any drag racing vehicle equipped with today sticky tire compounds or the acceleration and deceleration of oval track cars put considerable strain on the ring gear. For this reason, the fastener experts at ARP have developed the Pro Series ring gear bolts. they are forged from premium grade 8740 chrome moly steel and are heat treated to a nominal rating of 200,000 PSI tensile strength. Specially hardened, precision ground washers are included where required. Available to fit most any ring gear setup ranging from popular 9 Inch Ford GM 10 and 12 bolt rear ends to the beefy strange differentials found in top fuel and funny car applications.
Product Features:
See More
Product Features:
- Forged From Premium Grade 8740 Chrome Moly Steel
- Heat Treated
- Nominally Rated At 200,000 Psi Tensile Strength
- Specially Hardened, Precision Ground Washers
- 0.75″ Underhead Length
- 200,000 PSI
- Sold As A Set
Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.946-807)
from
$771.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Dorman – Rear Driveshaft Assembly (Part No.986-574)
from
$705.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints..
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Dorman – Rear Drive Shaft (Part No.976-060)
from
$678.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Dorman – Rear Driveshaft Assembly (Part No.986-514)
from
$716.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints..
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Upgrade your 2020 Ford Mustang with Top-Quality Drivetrains
When it comes to maintaining or upgrading your 2020 Ford Mustang, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Drivetrains are key to keeping your Mustang functioning at its best. At Advance Auto Parts, we offer a wide selection of 25 Drivetrains for the 2020 Ford Mustang, designed to meet your needs without breaking the bank.
From
Drive Shafts and Axle
replacements to
Differentials
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2020 Ford Mustang at great prices.
Our Drivetrains inventory for this model
ranges from just $5.49 to $643.99, with
an average price of $197.14.
Our 25 Drivetrains in stock come from 11 trusted brands, so you’re sure to find the right part for your 2020 Ford Mustang without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2020 Ford Mustang, we stock popular OEM and aftermarket Drivetrains from top names
like Valvoline, Royal Purple, Moog, and more.
Valvoline Drivetrains
start at just $14.49 and boast an impressive 5 stars average rating from customers.
Royal Purple and Moog also bring quality to the table, with Drivetrains available starting at $12.99, and at an average 5 stars rating.
With 1,502 customer reviews and counting, our 2020 Ford Mustang Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2020 Ford Mustang is always ready to roll. We’re committed to providing you with everything you need to keep your Mustang in top shape, all in one place.
Start shopping confidently below for your 2020 Ford Mustang!
Best-Selling Drive Shafts and Axles for 2020 Ford Mustangs
Enhance the driving experience in your Ford with 5 quality Drive Shafts and Axle components, starting at $42.99.
Spicer – Universal Joint (Part No.5-178X)
from
$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Spicer – Universal Joint (Part No.5-1350X)
from
$44.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
Dorman – REAR DRIVESHAFT (Part No.986-942)
from
$643.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Carquest Premium – C/V Axle (Part No.NCV717161)
from
$173.99
C/V Axle
Carquest Premium – C/V Axle (Part No.NCV717151)
from
$169.99
C/V Axle
Most Popular 2020 Ford Mustang Differentials
Customize your Ford with 14 Differentials products
like Differential Oil,
Differential Ring Gear Bolts, and
Differential Bearing Kits, all
priced under $535.99.
Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)
from
$14.49
Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Royal Purple – High Performance SAE 5W30 Synthetic Motor Oil, API Certified, 1 QT (Part No.01530)
from
$12.99
High Performance Motor Oil API LICENSED MOTOR OIL Royal Purple High Performance Motor Oil combines premium base oils with proprietary additive technologies to create a high performance synthetic engine oil that optimizes performance and protection. Royal Purple High Performance Motor Oils carry the current API and ILSAC engine oil licenses, as well as the GM dexos1 gasoline engine oil approval. ILSAC GF-6 AND GM DEXOS1 Modern gasoline direct injection (GDI) engines have achieved levels of power and fuel economy never before possible in passenger car engines. As a result, smaller engines operate at much higher loads across all engine speeds. This has caused increased wear in critical areas of the engine, and created a destructive phenomenon called low-speed pre-ignition (LSPI). The unique, state-of-the-art additive technology in Royal Purple High Performance engine oils is designed specifically to address these issues, and help engines maintain performance and reliability.
Product Features:
See More
Product Features:
- Better Wear Protection
- Increased Protection against Low Speed Pre-Ignition
- Increased Fuel Efficiency
- Better Protection for Vehicle Exhaust Emissions Equipment
- Improved Compatibility with Fuels Containing Ethanol
- Superior Corrosion Protection
- Made in USA
Royal Purple – Max Automatic Transmission Fluid (1 Quart) (Part No.01320)
from
$19.49
Max ATF is a synthetic, high-performance, automatic transmission fluid. Its low co-efficient of friction and high film strength help to dramatically reduce heat and wear. Additionally, Max ATF is more oxidation stable than other transmission fluids for longer fluid life. Max ATF significantly reduces heat to extend the life of your transmission.
Product Features:
See More
Product Features:
- High performance automatic transmission fluid
- High film strength helps to dramatically reduce heat and wear
- Fully compatible and can be mixed with other automatic transmission fluids
- Extends the life of your transmission
Motive Gear – Ring Gear Bolt (Part No.F75Z4216AA)
Motive Gear – Differential Pinion Shim Kit (Part No.1136R)
from
$17.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More
Valvoline – ULV ATF Full Synthetic Ultra Low Viscosity Automatic Transmission Fluid, 1 Quart (Part No.888460)
from
$18.29
Valvoline ULV is a full synthetic, ultra low viscosity transmission fluid specifically engineered for high speed automatic transmissions. Formulated to meet the performance requirements of the latest 9 & 10 speed transmission designs, including the Ford/GM 10R80 found in select Ford F-150 and Raptor trucks.
Product Features:
See More
Product Features:
- Formulated with premium synthetic base oils to achieve low viscosity and minimize deposits
- Provides excellent thermal and oxidation performance
- Durable friction modifiers help prevent shudder
- Advanced anti-wear technology to better prevent gear wear
Yukon Gear – Ring and Pinion Kit (Part No.24672)
from
$535.99
Ring and Pinion Kit
Yukon Gear – Ring and Pinion Kit (Part No.24670)
from
$514.99
Ring and Pinion Kit
Yukon Gear – Differential Parts K (Part No.14223)
from
$459.99
Differential Parts K
Yukon Gear – RngPnnKt (Part No.24691)
from
$431.99
RngPnnKt
Yukon Gear – RngPnnKt (Part No.24690)
from
$419.99
RngPnnKt
Yukon Gear – RngPnnKt (Part No.24692)
from
$419.99
RngPnnKt
USA Standard Gear – Master Overhaul Kit for 2015 & Up Mustang and F-150 (Part No.37153)
from
$405.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Master Overhaul Rebuild Kit
- For 2015 & Up Mustang & F150
- USA Standard offers the Most Comprehensive and Complete Master Rebuild Kit on the Market
Yukon Gear – Differential Pinion (Part No.33577)
from
$44.99
Differential Pinion
Top Picks for 2020 Ford Mustang Universal Joints
Upgrade Ford Mustangs with top-quality Universal Joints parts, including 6 OEM and aftermarket selections for your 2020 model.
MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.232)
from
$36.99
Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
- CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
- STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.231)
from
$41.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.331)
from
$19.99
Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for fleets, off-highway and commercial vehicles
- STRONG AND DURABLE — Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASEABLE DESIGN — Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
- INHIBITS PREMATURE WEAR — Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
- RELIABLE PERFORMANCE — Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
GMB – Universal Joint – Greasable (Part No.K1010481404GMB)
from
$32.60
Designed and built by GMB to handle the highest loads and excessive torque found in pickups, SUVs, 4x4s and off road vehicles.
Product Features:
See More
Product Features:
- Elliptical bearing design delivers reliable performance under the heaviest of loads
- Exclusive GMB Ultra-select bearing design exceeds OE specification
- Precision finish trunnions and bearing surfaces ensure durability
- Proven reliability in off-road conditions and harsh environments
Spicer – Universal Joint (Part No.5-1350-1X)
from
$49.99
Universal Joint
ACDelco – Professional U-Joint (Part No.K1010577081ACD)
from
$32.05
An ACDelco Professional, premium aftermarket Universal Joint provides pivot points for driveshafts and is the ideal high-quality aftermarket replacement component for many vehicles on the road today. A universal joint is comprised of a pair of hinges connected at a right angle that transmits power between two driveshafts. This premium aftermarket replacement universal joint is manufactured to meet your expectations for fit, form, and function. ACDelco offers a full line of Professional, premium aftermarket Chassis Parts to keep vehicles riding and handling like new. With competitive warranty coverage and products covering all major chassis systems and alignment products for many vehicles on the road today, it’s no wonder the pros rely on ACDelco Professional, premium aftermarket Chassis Parts.
Product Features:
See More
Product Features:
- Pivot points for driveshafts in your vehicle
- Comprised of a pair of hinges connected at a right angle
- Premium, high-quality aftermarket part
- Thoroughly engineered to meet or exceed your expectations for fit, form, and function
- Provides the performance and dependability you expect from ACDelco
Top-Rated Drivetrains Brands For Your 2020 Ford Mustang
Shop for the best-rated brands offering Drivetrains and other products for your 2020 Ford Mustangs. Below you’ll find some of our best rated Drivetrains from Valvoline, Royal Purple, and Moog, and more. Drivetrains from these brands that fit a 2020 Mustang start at just $12.99 and are rated as high as 5 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.
Popular Valvoline 2020 Ford Mustang Drivetrains
When it comes to maintaining or upgrading your 2020 Ford Mustang, using quality Drivetrains is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Drivetrains, specifically designed for the 2020 Ford Mustang. With over 2 Valvoline brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.49, with an average price of just $16.39. Plus, with over 2 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$14.49
$14.49
(2)
DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
“I’ve used this in my 2005 2500HD since I bought the truck with 20k on it now at 280k changed every other year maybe 40k I’d put on in two years,
I pu”
I pu”
from
$18.29
$18.29
This product is not rated
ULV ATF Full Synthetic Ultra Low Viscosity Automatic Transmission Fluid, 1 Quart
“”
Popular Royal Purple 2020 Ford Mustang Drivetrains
Royal Purple auto parts is one of the highest quality Drivetrain brands in the market. Any 2020 Ford Mustang owner should feel confident when installing genuine Royal Purple parts in their vehicle. To ensure the best fit and performance for your 2020 Mustang, Advance Auto Parts carries a full inventory of 2 Royal Purple Drivetrains. Plus you will be keeping your Ford in peak condition while saving money because prices on these Royal Purple Drivetrains range from $12.99 to $19.49, plus, with more than 112 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.
from
$19.49
$19.49
(30)
Max Automatic Transmission Fluid (1 Quart)
“I would like to know can I use this for my 2012 Dodge Charger”
FAQs for 2020 Ford Mustang Drivetrains
Which Drivetrains are best-sellers for 2020 Ford Mustangs?
Out of 25 Drivetrains that fit 2020 Ford Mustangs, the following parts are the top sellers:
- DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (12079201) – $14.49
- Greaseable Super Strength Universal Joint (10086947) – $36.99
- Non-Greaseable Super Strength Universal Joint (10086964) – $41.99
What’s the price range for 2020 Ford Mustang Drivetrains?
Drivetrain prices for the 2020 Ford Mustang start at $5.49 and go up to $643.99 for the most premium parts.
What’s the average price of a Drivetrain for a 2020 Ford Mustang?
The average price for Drivetrains for the 2020 Ford Mustang is $197.14. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Drivetrains for other Ford Mustang model years?
What are the cheapest Drivetrains for my 2020 Ford Mustang?
The cheapest 2020 Ford Mustang Drivetrains we carry in stock are:
- Ring Gear Bolt (20520467) – $5.49
- High Performance SAE 5W30 Synthetic Motor Oil, API Certified, 1 QT (8070001) – $12.99
- DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (12079201) – $14.49
- Differential Pinion Shim Kit (10954538) – $17.99
- ULV ATF Full Synthetic Ultra Low Viscosity Automatic Transmission Fluid, 1 Quart (12181693) – $18.29
What are the top-rated Drivetrains that fit the 2020 Ford Mustang?
Out of 1,502 reviews by customers, our 2020 Ford Mustang Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 2020 Ford Mustang and their top-rated products:
- Universal Joints
- Greaseable Premium Universal Joint (10086742) – $19.99
- Non-Greaseable Super Strength Universal Joint (10086964) – $41.99
- Greaseable Super Strength Universal Joint (10086947) – $36.99
- Drive Shafts and Axles
- Greaseable Premium Universal Joint (10086742) – $19.99
- Non-Greaseable Super Strength Universal Joint (10086964) – $41.99
- Greaseable Super Strength Universal Joint (10086947) – $36.99
- Differentials
- Greaseable Premium Universal Joint (10086742) – $19.99
- Non-Greaseable Super Strength Universal Joint (10086964) – $41.99
- Greaseable Super Strength Universal Joint (10086947) – $36.99
What types of Drivetrains do you sell for my 2020 Ford Mustang?
As of 2/5/25, these are some of the most in-demand types of Drivetrains for a 2020 Ford Mustang:
Can I get help with 2020 Ford Mustang Drivetrain orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Drivetrains and more.
What is your return policy for Ford Mustang Drivetrains?
Advance Auto Parts keeps returns simple. For new Ford Mustang Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
