2020 Ford Mustang Air Intakes

Essential Air Intakes for 2020 Ford Mustangs

Mr. Gasket – Ultra Seal: Intake Gasket (Part No.5835)

Ultra Seal: Intake Gasket

from

$37.69
Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material
  • Provides excellent sealing and durability
  • Silicone beading on both sides of each gasket
  • Complete with manifold end seals and distributor gasket
  • For OE replacement, high performance street, drag race and oval track use
  • Creates Tight Leak proof Seal
See More

Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 95736)

INTAKE MANIFOLD GASKET SET

from

$24.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98008 T-1)

Engine Intake Manifold Gasket Set

from

$117.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • STRONG AND DURABLE — Features molded rubber over an aluminized steel carrier which resists high heat and coolants
  • SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
  • EASIER TO INSTALL — Locating tabs assure proper alignment and easier installation
  • PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Mahle – Intake Manifold Gasket Set (Part No.A8043402374MAH)

Intake Manifold Gasket Set

from

$56.40
WARNING: This item cannot be returned for a replacement or refund if opened! Mahle is the largest gasket manufacturer in the world, providing you original equipment design and quality and world class aftermarket service. Mahle does not just cut gaskets – it designs total system sealing approaches that utilize application engineering. This means that regardless of what application you are trying to seal, you can count on Mahle doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. All gaskets are not created equal – Mahle gaskets prove it every day.

Product Features:
  • Original equipment design and quality
  • Head sets give you original equipment form, fit, and function
  • Utilizes OE equivalent or better materials in all head sets
  • Packaged in shrink wrapped tray
  • Every part you need to complete your gasket repair in one package unless otherwise stated
See More

Edelbrock – Intake Manifold replacement base and plenum cover gaskets (Part No.3832)

Intake Manifold replacement base and plenum cover gaskets

from

$31.99
Product Features:
  • For Ford 1986-95 5.0L
  • Base And Plenum Cover Gaskets
  • Black Color
  • Two Piece Configuration
  • Hardware Not Included
See More

Mr. Gasket – Intake Gasket (Part No.214)

Intake Gasket

from

$36.49
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. Comes complete with front & rear manifold end seals. For original equipment replacement, high performance street, drag race and oval track.brbrFits all Ford 351C – 4V or 351 Cleveland 4-Barrel heads.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material
  • Provides excellent sealing and durability
  • Die-cut for an excellent fit
  • Can be trimmed if necessary for modified port applications
  • Complete with manifold end seals
  • For OE replacement, high performance street, drag race and oval track use
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 96669)

Engine Intake Manifold Gasket Set

from

$16.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Includes all parts needed to complete the repair
  • Includes all parts needed to complete the repair
See More

aFe POWER – Throttle Body Spacer (Part No.46-33020)

Throttle Body Spacer

from

$157.99
Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers.

Product Features:
  • Precision Machined From T-6061 Billet Aluminum
  • Special Helix Design
  • Produces Increased HP/Torque/Throttle Response
  • Fits w/aFe Intakes
See More

aFe POWER – Throttle Body Spacer (Part No.46-33006)

Throttle Body Spacer

from

$157.99
Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers.

Product Features:
  • Precision Machined From T-6061 Billet Aluminum
  • Special Helix Design
  • Produces Increased HP/Torque/Throttle Response
  • Fits w/aFe Intakes
See More

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.60859)

Fuel Injection Throttle Body Mounting Gasket

from

$4.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61420)

Fuel Injection Throttle Body Mounting Gasket

from

$2.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Mahle – FI Throttle Body Mou (Part No.C7001428727MAH)

FI Throttle Body Mou

from

$11.53
FI Throttle Body Mou

Victor Reinz – Fuel Injection Throttle Body Mounting Gasket (Part No.71-14054-00)

Fuel Injection Throttle Body Mounting Gasket

from

$3.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

MAHLE Original – Fuel Injection Throttle Body Mounting Gasket (Part No.G31745)

Fuel Injection Throttle Body Mounting Gasket

from

$4.49
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61377)

Fuel Injection Throttle Body Mounting Gasket

from

$5.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Mahle – FI Throttle Body Mou (Part No.C7001299901MAH)

FI Throttle Body Mou

from

$5.95
FI Throttle Body Mou

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61096)

Fuel Injection Throttle Body Mounting Gasket

from

$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Cardone – Electric Throttle Body: Remanufactured (Part No.67-6004)

Electric Throttle Body: Remanufactured

from

$421.99
Every CARDONE Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.

Product Features:
  • Each unit is disassembled and meticulously inspected. Each component is inspected, remanufactured or replaced resulting in reliable and consistent performance.
  • A specialized component cleaning process prevents the throttle bore surface from being deformed, ensuring optimum air flow.
  • The high and low integrated throttle position sensors are tested to match O.E. characteristics throughout the entire operational range.
  • Final assemblies are tested for all critical functions, including response time and air flow at multiple points.
  • Each unit is guaranteed to function like the original.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Continental – Electronic Throttle Body: New, Original Equipment (Part No.ETB10001)

Electronic Throttle Body: New, Original Equipment

from

$377.99
Continental electronic throttle bodies are the genuine OEM part. Continental sensors are made and manufactured to the highest quality and original equipment specifications. They are identical in fit, form, and function and provide the genuine quality of OE components supplied to auto manufacturers worldwide. Professional technicians and DIYers alike want quality products for ease of installation. Electronic throttle bodies are essential in optimizing fuel economy and ensure your vehicle is running at peak performance and efficiency.

Product Features:
  • The exact OEM part
  • Exact form, fit, and function
  • Easy installation
  • Durable robust design
  • Made in ISO certified facilites
See More

Cardone – Electric Throttle Body: Remanufactured (Part No.67-6000)

Electric Throttle Body: Remanufactured

from

$191.99
Every CARDONE Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.

Product Features:
  • Each unit is disassembled and meticulously inspected. Each component is inspected, remanufactured or replaced resulting in reliable and consistent performance.
  • A specialized component cleaning process prevents the throttle bore surface from being deformed, ensuring optimum air flow.
  • The high and low integrated throttle position sensors are tested to match O.E. characteristics throughout the entire operational range.
  • Final assemblies are tested for all critical functions, including response time and air flow at multiple points.
  • Each unit is guaranteed to function like the original.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Edelbrock – Ford 1986-93 5.0L Mustang 70mm Throttle Body, Satin Finish (Part No.3825)

Ford 1986-93 5.0L Mustang 70mm Throttle Body, Satin Finish

from

$336.99
Larger diameter increases flow and performance. Direct bolt-on. No modifications necessary. Manufacture red on sophisticated machinery. Butterflies are precision machined. Includes new machined throttle position sensor. Bolts to stock on aftermarket manifold. All stock sensors and lines fit like stock.

Product Features:
  • Larger Diameter Increases Flow and Performance
  • Direct Bolt-On; No Modifications Necessary
  • Manufactured On Sophisticated Machinery
  • Butterflies Are Precision Machined
  • Includes New Machined Throttle Position Sensor
  • Bolts To Stock Or Aftermarket Manifold
  • All Stock Sensors And Lines Fit Like Stock
See More

Tech Smart – Fuel Injection Throttle Body (Part No.S20020)

Fuel Injection Throttle Body

from

$270.05
Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.

Product Features:
  • 100% NEW, never remanufactured, which maximizes performance and extends service life
  • Undergoes extensive testing to ensure quality and reliability out of the box
  • Matches OE response time for peak performance on drive by wire systems
  • All TechSmart® parts meet or exceed OE performance, providing today’s technician with the quality parts needed to get the job done right, the first time
See More

Dorman – Electronic Throttle Body: New (Part No.977-584)

Electronic Throttle Body: New

from

$329.99
When a vehicle idles roughly, displays a malfunction indicator lamp or sets DTCs, the cause might be oil ingress or dirt and carbon buildup in the electronic throttle body. This 100% new electronic throttle body is designed to match the fit and function of the original equipment throttle body on specified vehicles. It features a non-contact Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to help prevent future failures.

Product Features:
  • Direct replacement – this 100% new electronic throttle body is designed to match the fit and function of the original equipment throttle body on specified vehicles.
  • Ideal solution – engineered to help restore proper engine performance when the factory throttle body is malfunctioning due to oil ingress or dirt and carbon buildup, resulting in DTCs and rough idling.
  • Upgraded construction – features a non-contact Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to help prevent future failures
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Hitachi – Electronic Throttle Body: New (Part No.ETB0042)

Electronic Throttle Body: New

from

$247.99
Hitachi’s Electronic Throttle Bodies (ETBs) are designed to provide extraordinary accuracy with quick response times. High quality materials ensure that even under the most extreme conditions, Hitachi’s ETBs will not deform or malfunction. Precision Throttle Position Sensor (TPS) Circuitry maintains accurate engine mapping resulting in optimal fuel economy and performance with the lowest possible emissions. Details such as internal gear sizes, tooth count, materials, and protected circuitry provide a durable and reliable product. Designed to meet the exact needs of each specific vehicle, Hitachi’s electronic throttle bodies are the premium choice.

Product Features:
  • Advanced throttle position sensor technology ensures smooth idle conditions and precise air flow metering
  • Hitachi is a Tier 1 OE supplier for Throttle bodies
  • 100% NEW, never remanufactured
  • Precision TPS Circuitry maintains accurate engine mapping; Pemium componentry allows for extended durability; Tailored for each vehicle to reduce install times.
  • These quality Electronic Throttle Bodies feature precise throttle opening, improved fuel economy and reduced emissions.
  • Powerful electric motor provides quick and accurate response for optimal engine efficiency
  • Electronics are sealed to prevent contamination that may result in inaccurate readings
  • Detailed manufacturing tracking system using QR codes
See More

Cardone – Electric Throttle Body: Remanufactured (Part No.67-6030)

Electric Throttle Body: Remanufactured

from

$326.99
Every CARDONE Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.

Product Features:
  • Each unit is disassembled and meticulously inspected. Each component is inspected, remanufactured or replaced resulting in reliable and consistent performance.
  • A specialized component cleaning process prevents the throttle bore surface from being deformed, ensuring optimum air flow.
  • The high and low integrated throttle position sensors are tested to match O.E. characteristics throughout the entire operational range.
  • Final assemblies are tested for all critical functions, including response time and air flow at multiple points.
  • Each unit is guaranteed to function like the original.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Tech Smart – Fuel Injection Throttle Body (Part No.S20068)

Fuel Injection Throttle Body

from

$300.05
Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.

Product Features:
  • 100% NEW, never remanufactured, which maximizes performance and extends service life
  • Undergoes extensive testing to ensure quality and reliability out of the box
  • Matches OE response time for peak performance on drive by wire systems
  • All TechSmart® parts meet or exceed OE performance, providing today’s technician with the quality parts needed to get the job done right, the first time
See More

Motorcraft – THROTTLE BODY (Part No.TB-34)

THROTTLE BODY

from

$256.99
THROTTLE BODY

Cardone New – New Fuel Injection Throttle Body (Part No.6E-6000)

New Fuel Injection Throttle Body

from

$246.99
All CARDONE 100% New Electronic Throttle Bodies are guaranteed to fit and function like the original due to our proprietary engineering standards. Each unit is built and tested as a complete assembly to ensure quick installation and reliable performance. All components match O.E., ensuring accurate air flow in all driving conditions and peak engine performance.

Product Features:
  • Critical components used in manufacturing the electronic throttle body, including the housing, throttle plate, position sensors, throttle actuator motor and throttle plate return spring conform to precise O.E. dimensions.
  • Each throttle body is tested for all critical functions, including response time and air flow at multiple points, ensuring an optimal fuel/air ratio.
  • 100% computerized testing of motor, throttle position sensor and articulation ensures reliable and consistent performance.
  • Each unit is guaranteed to fit and function like the original.
See More

Upgrade your 2020 Ford Mustang with Top-Quality Air Intakes

When it comes to maintaining or upgrading your 2020 Ford Mustang, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Air Intakes are key to keeping your Mustang functioning at its best. At Advance Auto Parts, we offer a wide selection of 6 Air Intakes for the 2020 Ford Mustang, designed to meet your needs without breaking the bank. From Intake Manifold Part replacements to Throttle Bodies & Carb Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Air Intakes for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Air Intakes for your 2020 Ford Mustang at great prices. Our Air Intakes inventory for this model ranges from just $5.99 to $401.99, with an average price of $82.32. Our 6 Air Intakes in stock come from 4 trusted brands, so you’re sure to find the right part for your 2020 Ford Mustang without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2020 Ford Mustang, we stock popular OEM and aftermarket Air Intakes from top names like FELPRO, and more. FELPRO Air Intakes start at just $5.99 and boast an impressive 5 stars average rating from customers. With 4 customer reviews and counting, our 2020 Ford Mustang Air Intakes have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Air Intake upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2020 Ford Mustang is always ready to roll. We’re committed to providing you with everything you need to keep your Mustang in top shape, all in one place. Start shopping confidently below for your 2020 Ford Mustang!

Best-Selling Intake Manifold Parts for 2020 Ford Mustangs

Enhance the driving experience in your Ford with 2 quality Intake Manifold Part components, starting at $15.29.

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 97215)

Engine Intake Manifold Gasket Set

from

$22.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 97428)

Engine Intake Manifold Gasket Set

from

$15.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Most Popular 2020 Ford Mustang Throttle Bodies & Carb Parts

Customize your Ford with 3 Throttle Bodies & Carb Parts products like Throttle Body Mounting Gaskets and Fuel Injection Throttle Body Spacers, all priced under $157.99.

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61377)

Fuel Injection Throttle Body Mounting Gasket

from

$5.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

aFe POWER – Throttle Body Spacer (Part No.46-33020)

Throttle Body Spacer

from

$157.99
Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers.

Product Features:
  • Precision Machined From T-6061 Billet Aluminum
  • Special Helix Design
  • Produces Increased HP/Torque/Throttle Response
  • Fits w/aFe Intakes
See More

Mahle – FI Throttle Body Mou (Part No.C7001428727MAH)

FI Throttle Body Mou

from

$11.53
FI Throttle Body Mou

Top Picks for 2020 Ford Mustang Throttle Body Parts

Upgrade Ford Mustangs with top-quality Throttle Body Parts parts, including 1 OEM and aftermarket selections for your 2020 model.

Motorcraft – THROTTLE BODY (Part No.TB-35)

THROTTLE BODY

from

$401.99
THROTTLE BODY

Top-Rated Air Intakes Brands For Your 2020 Ford Mustang

Shop for the best-rated brands offering Air Intakes and other products for your 2020 Ford Mustangs. Below you’ll find some of our best rated Air Intakes from FELPRO, and more. Air Intakes from these brands that fit a 2020 Mustang start at just $5.99 and are rated as high as 5 stars. OEM and aftermarket Air Intakes don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2020 Ford Mustang Air Intakes

When it comes to maintaining or upgrading your 2020 Ford Mustang, using quality Air Intakes is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Air Intakes, specifically designed for the 2020 Ford Mustang. With over 3 FELPRO brand Air Intakes in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $5.99, with an average price of just $14.76. Plus, with over 1 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Air Intakes will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Fuel Injection Throttle Body Mounting Gasket
from
$5.99

(1)

Fuel Injection Throttle Body Mounting Gasket

“Perfect fit”

Engine Intake Manifold Gasket Set
from
$15.29
This product is not rated

Engine Intake Manifold Gasket Set

“”

Engine Intake Manifold Gasket Set
from
$22.99
This product is not rated

Engine Intake Manifold Gasket Set

“”

FAQs for 2020 Ford Mustang Air Intakes

Which Air Intakes are best-sellers for 2020 Ford Mustangs?

Out of 6 Air Intakes that fit 2020 Ford Mustangs, the following parts are the top sellers:

What’s the price range for 2020 Ford Mustang Air Intakes?

Air Intake prices for the 2020 Ford Mustang start at $5.99 and go up to $401.99 for the most premium parts.

What’s the average price of a Air Intake for a 2020 Ford Mustang?

The average price for Air Intakes for the 2020 Ford Mustang is $82.32. Keep in mind the variety of part types within our Air Intake category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Air Intakes for other Ford Mustang model years?

Yes, we currently carry Air Intakes for 56 model years of Ford Mustangs between 1964 and 2025. Air Intakes are bought most frequently for the following model years: 2023, 2022, 2021, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Air Intakes for my 2020 Ford Mustang?

The cheapest 2020 Ford Mustang Air Intakes we carry in stock are:

What are the top-rated Air Intakes that fit the 2020 Ford Mustang?

Out of 4 reviews by customers, our 2020 Ford Mustang Air Intakes have an average customer rating of . These are some of the highest-rated Air Intake types for the 2020 Ford Mustang and their top-rated products:

What types of Air Intakes do you sell for my 2020 Ford Mustang?

As of 2/5/25, these are some of the most in-demand types of Air Intakes for a 2020 Ford Mustang:

Can I get help with 2020 Ford Mustang Air Intake orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Air Intakes and more.

What is your return policy for Ford Mustang Air Intakes?

Advance Auto Parts keeps returns simple. For new Ford Mustang Air Intakes and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.