2020 Ford Edge Fuel and Emissions Systems

Name: Vapor Canister Vent Valve
Brand: Carquest Premium
SKU: CPC2369
Price: 22.99 USD

Below you will find various in-demand Ford Fuel and Emissions Systems, components and accessories for your 2020 Edge. Advance Auto Parts has popular Edge parts like Vapor Canister Purge Valves, Air Flow Sensors, Fuel Injectors and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other Edge model years including 2014, 2015, 2016, 2017, 2018, 2019, 2021, 2022, 2023 and more. Select a category of 2020 Ford Edge Fuel and Emissions Systems below and start saving instantly.

Popular 2020 Ford Edge Fuel and Emissions Systems Categories

Air- Fuel Ratio Sensors

Fuel Tank Cleaning Kits

Fuel Pressure Sensors

Air Flow Meters and Mass Air

Fuel Pump Relays

Fuel Pumps

Vapor Canister Vent Solenoids

Vapor Canister Vent Valves

Manifold Air Pressure Sensors

Ambient Air Temperature Sensors

Fuel Injector O-Ring Kits

Fuel Tank Lock Rings

Mass Air Flow Sensor Connectors

Fuel Pump Tank Seals

Bypass Line Seal Rings

Ambient Air Quality Sensor Connector

Essential Fuel and Emissions Systems for 2020 Ford Edges

from

$22.99

Ensure that your vehicle’s emission control system performs at its best with Carquest premium Vapor Canister Vent Valves. Manufactured for long-lasting performance, these Vent Valves provide reliable operation and help maintain your vehicle’s compliance with environmental regulations. For cleaner emissions, optimal vehicle efficiency and perfomance, trust Carquest Vapor Canister Vent Valves.

Product Features:

Provides closure for the EVAP system (normally vented) during OBD II test cycle
Includes integrated filter, where applicable, that captures contaminants and particulates from incoming air, preventing clogging and ensuring clean airflow
Quick valve response to engine demands, ensuring efficient venting of vapors and optimizing overall engine performance
Meets or exceeds all OEM specifications

from

$12.49

When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$67.99

Bosch OE quality pressure sensors for accurate measurements with high durability, fast response time and wide measuring range

Product Features:

Bosch OE quality pressure sensors for accurate measurements
Bosch OE quality pressure sensors for long term stability
Bosch OE quality pressure sensors with a short response time
Bosch OE quality pressure sensors with improved media resistance

from

$315.99

Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$132.99

NGK is the sensor specialist for import and domestic applications. Established under the NGK product family, oxygen sensors are part of our ongoing commitment to streamlining product types and increasing coverage. A ceramic company at our core, uses cutting-edge technology to control the ceramic used in our oxygen sensors from raw material to finished product. is the world’s largest supplier and manufacturer of OE oxygen sensors. Combining expertise and innovation, oxygen sensors deliver superior fit, form, and function. oxygen sensors undergo extensive testing during manufacturing to ensure quality and reliability that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for comprehensive market support and OE application technology.

Product Features:

OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$81.99

DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision-built for exact replacement and a first time fit. DENSO gives you the right part and the right fit.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$7.99

The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$30.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$7.99

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

Premium OE quality materials
Services one injector

from

$15.99

All Motorcraft Seal designs undergo rigorous lab and real world tests in order to provide original equipment performance and reliability. Motorcraft Seals are extensively tested for proper seating and sealing under both temperature and pressure extremes.

Product Features:

Why Buy:
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.
Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
As with all Motorcraft and Ford Parts, any innovations or improvements developed since the manufacture of the vehicle are included in these aftermarket replacement parts, ensuring the most current technology and performance

from

$44.99

This fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles
Restores functionality – reliable replacement for an original part that has failed due to fatigue or due for replacement during fuel pump tank service
Durable construction – recommended for replacement when the fuel pump or sensor is replaced
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$31.99

The only parts recommended by Ford Motor Company for Ford and Lincoln vehicles. Motorcraft Seals are designed and tested to Ford’s rigorous engineering standards. Motorcraft parts fit right the first time for quicker, easier installation.

from

$105.99

A malfunctioning vapor canister vent solenoid can cause the engine light to come on. This vapor canister vent solenoid is engineered of quality materials for durability to ensure proper operation of the vehicle’s evaporative emissions system.

Product Features:

Direct replacement – this vapor canister vent solenoid fits and performs like original equipment with simple plug-and-play installation
Quality construction – manufactured from premium materials for a long service life
Excellent value – original equipment function at a lower price
Quality tested – has undergone simulation and endurance testing to ensure proper fit and performance

from

$76.99

Provides closure for the EVAP system (normally vented) during OBD II test cycle
Includes integrated filter, where applicable, that captures contaminants and particulates from incoming air, preventing clogging and ensuring clean airflow
Quick valve response to engine demands, ensuring efficient venting of vapors and optimizing overall engine performance
Meets or exceeds all OEM specifications

from

$91.99

Hitachis Air Flow Sensors (MAFs) measure the amount and characteristics of air entering the engine. Hitachi uses precision elements and high-quality components for enhanced durability and accurate air flow measurements. Hitachi MAFs are 100% air flow tested for ideal performance and are calibrated for each application ensuring your vehicle meets the strict emission standards set by the manufacturer. Details such as a contaminant bypass port (when applicable) and protected circuitry providing a durable and reliable product approved by OE manufacturers makes Hitachis air flow sensors the premium choice.

Product Features:

Hitachi is a Tier 1 OE supplier for air flow sensors
100% NEW, never remanufactured
Hitachi’s advanced precision elements and high quality components provide enhanced durability. We feature exact fitment and calibration for each vehicle, which assists engine efficiency and fuel mileage. Our sensors are 100% air flow tested to meet exac
Precision manufactured and assembled sensing elements for accurate air flow measurements

from

$89.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium mass air flow sensors meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE engine management systems design expertise
Platinum connector threads reduce the number of connection points for faster reaction to change
Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations
Ceramic board provides reliable voltage to eliminate engine rough-idle problems
Each new sensor is road tested to ensure real world performance and to verify that each design meets our high standards for quality
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed

from

$31.99

Make better electrical repairs and accessory installations with this versatile and durable pigtail connector. It allows quick circuit disconnections for service, and is engineered for reliable performance.

Product Features:

Product Features:

Professional appearance – this electrical pigtail is designed for a clean, professional look when installed
Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$75.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$36.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$25.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$69.99

Wire Assembly

from

$44.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$16.99

Carquest Premium offers a complete line of fuel tank lock rings covering a wide variety of North American vehicle applications. Carquest Premium fuel tank lock rings are engineered to meet or exceed all OEM specifications. Carquest Premium fuel tank lock rings are precision stamped and are treated with a rust proof finish to ensure durability and strength.

Product Features:

Engineered to meet or exceed all OEM specifications
Precision stamped and are treated with a rust proof finish to ensure durability and strength

from

$25.99

A recommended replacement whenever the sending unit is serviced, this fuel tank lock ring is a direct match for the original part. Designed for a secure fit, it’s manufactured from durable materials for reliable service.

Product Features:

Direct replacement – this fuel tank lock ring matches the fit, function and performance of the original part
Ideal solution – recommended for replacement whenever the sending unit is serviced to ensure a secure connection to the fuel tank
Durable construction – manufactured from quality materials for superior service and reliability
Trustworthy design – backed by a team of product designers and engineers with over 100 years of automotive aftermarket experience

from

$22.99

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:

Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.

from

$62.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$79.99

Pressure sensors are used within several operating systems on the vehicle. Subjects in this category measure the pressure of both liquid and air to include air in a positive pressure and negative pressure range. Pressure sensors report out as the result of an electrical device called a strain gauge which produces an analog or digital signal output dependent on the needs of the circuit. Pressures may be very low such as barometric pressure, or extremely high such as in a high-pressure fuel injection system.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$59.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

Upgrade your 2020 Ford Edge with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2020 Ford Edge, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Edge functioning at its best. At Advance Auto Parts, we offer a wide selection of 21 Fuel and Emissions Systems for the 2020 Ford Edge, designed to meet your needs without breaking the bank. From Vapor Canister Purge Valve replacements to Air Flow Sensors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2020 Ford Edge at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $12.49 to $179.99, with an average price of $62.78. Our 21 Fuel and Emissions Systems in stock come from 8 trusted brands, so you’re sure to find the right part for your 2020 Ford Edge without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2020 Ford Edge, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like Carquest Premium Dorman, and more. Carquest Premium Fuel and Emissions Systems start at just $16.99 and boast an impressive 4.4 stars average rating from customers. With 21 customer reviews and counting, our 2020 Ford Edge Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2020 Ford Edge is always ready to roll. We’re committed to providing you with everything you need to keep your Edge in top shape, all in one place. Start shopping confidently below for your 2020 Ford Edge!

Best-Selling Vapor Canister Purge Valves for 2020 Ford Edges

Enhance the driving experience in your Ford with 3 quality Vapor Canister Purge Valve components, starting at $22.99.

show more show less

from

$105.99

Direct replacement – this vapor canister vent solenoid fits and performs like original equipment with simple plug-and-play installation
Quality construction – manufactured from premium materials for a long service life
Excellent value – original equipment function at a lower price
Quality tested – has undergone simulation and endurance testing to ensure proper fit and performance

from

$76.99

Provides closure for the EVAP system (normally vented) during OBD II test cycle
Includes integrated filter, where applicable, that captures contaminants and particulates from incoming air, preventing clogging and ensuring clean airflow
Quick valve response to engine demands, ensuring efficient venting of vapors and optimizing overall engine performance
Meets or exceeds all OEM specifications

from

$22.99

Provides closure for the EVAP system (normally vented) during OBD II test cycle
Includes integrated filter, where applicable, that captures contaminants and particulates from incoming air, preventing clogging and ensuring clean airflow
Quick valve response to engine demands, ensuring efficient venting of vapors and optimizing overall engine performance
Meets or exceeds all OEM specifications

Top Picks for 2020 Ford Edge Fuel Injectors

Upgrade Ford Edges with top-quality Fuel Injectors parts, including 2 OEM and aftermarket selections for your 2020 model.

show more show less

from

$91.99

Hitachi is a Tier 1 OE supplier for air flow sensors
100% NEW, never remanufactured
Hitachi’s advanced precision elements and high quality components provide enhanced durability. We feature exact fitment and calibration for each vehicle, which assists engine efficiency and fuel mileage. Our sensors are 100% air flow tested to meet exac
Precision manufactured and assembled sensing elements for accurate air flow measurements

from

$59.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

In-Demand Fuel Pumps for 2020 Ford Edges

Select from 2 premium Fuel Pumps parts for your 2020 Ford Edge, with prices ranging from $41.99 to $179.99.

show more show less

from

$41.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$179.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

Most Sold 2020 Ford Edge Fuel Tanks

Explore our best-selling Ford parts for the 2020 Edge among 5 OEM and aftermarket options starting from $12.49.

show more show less

from

$16.99

Engineered to meet or exceed all OEM specifications
Precision stamped and are treated with a rust proof finish to ensure durability and strength

from

$12.49

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$31.99

from

$22.99

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:

Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.

from

$25.99

Direct replacement – this fuel tank lock ring matches the fit, function and performance of the original part
Ideal solution – recommended for replacement whenever the sending unit is serviced to ensure a secure connection to the fuel tank
Durable construction – manufactured from quality materials for superior service and reliability
Trustworthy design – backed by a team of product designers and engineers with over 100 years of automotive aftermarket experience

Top-Rated Fuel and Emissions Systems Brands For Your 2020 Ford Edge

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2020 Ford Edges. Below you’ll find some of our best rated Fuel and Emissions Systems from Carquest Premium and Dorman, and more. Fuel and Emissions Systems from these brands that fit a 2020 Edge start at just $16.99 and are rated as high as 4.4 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest Premium 2020 Ford Edge Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2020 Ford Edge, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Fuel and Emissions Systems, specifically designed for the 2020 Ford Edge. With over 1 Carquest Premium brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $16.99. Plus, with over 5 customer reviews and an average rating of 4.4 stars, you can trust that our Carquest Premium Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $16.99

(5)

Fuel Tank Lock Ring LO1582926

“Seems like a nice quality part, installed nice, no complaints.”

Popular Dorman 2020 Ford Edge Fuel and Emissions Systems

Dorman auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 2020 Ford Edge owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2020 Edge, Advance Auto Parts carries a full inventory of 1 Dorman Fuel and Emissions Systems. Plus you will be keeping your Ford in peak condition while saving money because prices on these Dorman Fuel and Emissions Systems range up to $105.99, plus, with more than 2 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

from $105.99

(2)

Evaporative Emissions Canister Vent Valve

“Where is it located in my ford ecosport 2018 1.0”

FAQs for 2020 Ford Edge Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 2020 Ford Edges?

Out of 21 Fuel and Emissions Systems that fit 2020 Ford Edges, the following parts are the top sellers:

Air Flow Sensor – New Actual OE Part (10595018) – $91.99
Fuel Tank Cleaning Kit (11692237) – $12.49
Original Equipment (O.E.) Sensor Assembly – Tripminder (11865690) – $39.99

What’s the price range for 2020 Ford Edge Fuel and Emissions Systems?

Fuel and Emissions System prices for the 2020 Ford Edge start at $12.49 and go up to $179.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 2020 Ford Edge?

The average price for Fuel and Emissions Systems for the 2020 Ford Edge is $62.78. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Ford Edge model years?

Yes, we currently carry Fuel and Emissions Systems for 16 model years of Ford Edges between 2007 and 2024. Fuel and Emissions Systems are bought most frequently for the following model years: 2023, 2022, 2021, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Fuel and Emissions Systems for my 2020 Ford Edge?

The cheapest 2020 Ford Edge Fuel and Emissions Systems we carry in stock are:

Fuel Tank Cleaning Kit (11692237) – $12.49
Fuel Tank Lock Ring LO1582926 (11763228) – $16.99
Original Equipment (O.E.) Ring – Retaining (11865591) – $22.99
Vapor Canister Vent Valve (12456620) – $22.99
Engine Coolant Bypass Line Seal Ring (11464516) – $25.99

What are the top-rated Fuel and Emissions Systems that fit the 2020 Ford Edge?

Out of 21 reviews by customers, our 2020 Ford Edge Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 2020 Ford Edge and their top-rated products:

Vapor Canister Purge Valves
- Evaporative Emissions Canister Vent Valve (10916191) – $105.99

What types of Fuel and Emissions Systems do you sell for my 2020 Ford Edge?

As of 11/2/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 2020 Ford Edge:

Can I get help with 2020 Ford Edge Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Fuel and Emissions Systems and more.

What is your return policy for Ford Edge Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Ford Edge Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2020 Ford Edge Fuel and Emissions Systems

Carquest Premium – Vapor Canister Vent Valve (Part No.CPC2369)

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Bosch – High Pressure Sensor (Part No.0261545038)

Delphi – Fuel Pump Module Assembly: With Float Arm, Seal (Part No.FG1206)

NTK – Wideband Oxygen Sensor: Air-Fuel Ratio 5 Wire, 12.8" Long, Heated, Direct Fit (Part No.24334)

DENSO – Wideband Oxygen Sensor: Upstream, 5 Wire, 11.46" Long, Heated, Exact Fit (Part No.234-5175)

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1459)

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1251)

Carquest Premium – Fuel Injector Seal Kit (Part No.AS052)

Motorcraft – Fuel Injector O-Ring Kit (Part No.CM-4717)

Dorman – Fuel Tank O-Ring (Part No.911-245)

Motorcraft – Original Equipment (O.E.) Gasket (Part No.CG-807)

Dorman – Evaporative Emissions Canister Vent Valve (Part No.911-216)

Carquest Premium – Vapor Canister Vent Solenoid (Part No.CPA1061)

Hitachi – Air Flow Sensor – New Actual OE Part (Part No.MAF0012)

Spectra Premium – Mass Air Flow Sensor (Part No.MA147)

Dorman – Multi-Purpose Pigtail Connector (Part No.645-323)

Carquest Premium – Multi-Purpose Relay (Part No.RAC2602)

Carquest Premium – Multi-Purpose Relay (Part No.RAA1807)

Felpro – Engine Coolant Bypass Line Seal Ring (Part No.36046)

Motorcraft – Wire Assembly (Part No.WPT-322)

Carquest Premium – Multi-Use Connector (Part No.PTA2925)

Carquest Premium – Fuel Tank Lock Ring LO1582926 (Part No.LO1582926)

Dorman – Lock Ring For The Fuel Pump (Part No.579-207)

Motorcraft – Original Equipment (O.E.) Ring – Retaining (Part No.FPR-11)

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECA1416)

Carquest Premium – Manifold Absolute Pressure Sensor (Part No.ECA2965)

Carquest Premium – Air Charge Temperature Sensor (Part No.ECC1177)

Dorman – Evaporative Emissions Canister Vent Valve (Part No.911-216)

Carquest Premium – Vapor Canister Vent Solenoid (Part No.CPA1061)

Carquest Premium – Vapor Canister Vent Valve (Part No.CPC2369)

Motorcraft – Original Equipment (O.E.) Sensor Assembly – Tripminder (Part No.DY-1160)

NTK – Wideband Oxygen Sensor: Air-Fuel Ratio 5 Wire, 12.8" Long, Heated, Direct Fit (Part No.24334)

DENSO – Air-Fuel Ratio Sensor 4 Wire, Direct Fit, Heated, Wire Length: 17.52" (Part No.234-5732)

Carquest Premium – Manifold Absolute Pressure Sensor (Part No.ECA2965)

Motorcraft – Wire Assembly (Part No.WPT-322)

Dorman – Multi-Purpose Pigtail Connector (Part No.645-323)

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1251)

Hitachi – Air Flow Sensor – New Actual OE Part (Part No.MAF0012)

Felpro – Fuel Injector O-Ring Kit (Part No.ES 73118)

Carquest Premium – Multi-Purpose Relay (Part No.RAA1735)

Delphi – Fuel Pump Module Assembly: With Float Arm, Seal (Part No.FG2071)

Carquest Premium – Fuel Tank Lock Ring LO1582926 (Part No.LO1582926)

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Motorcraft – Original Equipment (O.E.) Gasket (Part No.CG-807)

Motorcraft – Original Equipment (O.E.) Ring – Retaining (Part No.FPR-11)

Dorman – Lock Ring For The Fuel Pump (Part No.579-207)