from

$139.99

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
Safety compliant – part has undergone simulated crash testing under government guidelines
Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

from

$68.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Front Bumper Cover Grille, for Crossroad Model. It is Designed to Replace Your Existing Bumper Cover Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:

For Crossroad Model, Made Of Thermoplastic Polyolefin
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$69.99

Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$86.99

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$75.99

Coast to Coast International door handle and mirror covers are a quick way to add a touch of chrome or black-out styling to change the appearance of a vehicle. All covers are designed and manufactured to overlay the OEM handle or mirror to give the appearance of a factory upgrade. Installation is quick and easy with no tools required. Pair them with CCI grille overlays and Impostor(R) wheel skins for a complete package look. Limited lifetime warranty. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:

A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Mirror Covers. Add Handles And Wheel Skins (Sold Separately) For A Factory-Style Package
Mirror Covers Are Year-Make-Model Specific And Available In Different Finishes
Fits Like A Glove Over Existing Mirrors And Stay Securely Attached Using A Retention System Molded Into The Cover So You Can Be Confident That They Wont Fall Off While Driving
UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.

from

$534.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New CAPA Certified Premium Replacement Grille, Matte-Black, Texture, With Chrome Molding. It is Designed to Replace Your Existing Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:

Matte-Black, Texture, With Chrome Molding, Made Of ABS Thermoplastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$65.99

Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:

Protects vehicle’s hood from bugs or rock chips
Low profile, aerodynamic design
Installs in less than 5 minutes, no tools required
Custom fit exactly to your vehicle
Leather grain vinyl

from

$169.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$122.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$49.99

New Standard Replacement Front Bumper Lower Valance, Black Textured Finish

Product Features:

Black Textured Finish, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$74.99

Coast to Coast International door handle and mirror covers are a quick way to add a touch of chrome or black-out styling to change the appearance of a vehicle. All covers are designed and manufactured to overlay the OEM handle or mirror to give the appearance of a factory upgrade. Installation is quick and easy with no tools required. Pair them with CCI grille overlays and Impostor(R) wheel skins for a complete package look. Limited lifetime warranty. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:

A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Door Handle Covers. Add Mirror Covers And Wheel Skins (Sold Separately) For A Factory-Style Package
Door Handle Covers Are Year-Make-Model Specific And Available In Different Finishes
Fits Like A Glove Over Existing Handles And Stay Securely Attached Using A Retention System Molded Into The Cover So You Can Be Confident That They Wont Fall Off While Driving
UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.

from

$44.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New CAPA Certified Standard Replacement Driver Side Rear Bumper Cover Reflector. It is Designed to Replace Your Existing Bumper Cover Reflector. Check to Be Sure It Fits Your Vehicle.

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE

from

$44.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New CAPA Certified Standard Replacement Passenger Side Rear Bumper Cover Reflector. It is Designed to Replace Your Existing Bumper Cover Reflector. Check to Be Sure It Fits Your Vehicle.

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE

from

$27.99

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
Easy Install – Less than 15 Minutes! based on average install time across all parts
No Special Tools Required
Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
Trilingual Install Instructions provided inside each package

from

$35.99

Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:

Exact fit original equipment design guarantees correct fit and function
Engineered and built to meet or exceed original equipment quality standards
Individually tested for performance and reliability
Hardened, nitride plated steel shaft provides optimal durability
Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
Heavy gauge steel body is electrostatically painted and heat cured to OE specs
Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
No special installation tools required
Consistent Performance In All Weather Conditions
Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

from

$4.99

New Standard Replacement Front Driver Side Bumper Cover Support

Product Features:

Made Of Polyoxymethylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$4.49

New Standard Replacement Front Passenger Side Bumper Cover Support

Product Features:

Made Of Polyoxymethylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$144.99

Coat to Coast International body side molding is a stylish accessory that compliments any vehicle. Durable ABS plastic is chrome plated for lasting shine. Side moldings install effortlessly with automotive grade 3M tape. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:

Constructed From High-Quality, Durable, Automotive Grade ABS
Two Layers Of Clear Coat Enhance And UV Protect The Finish
Quickly And Affordably Upgrades The Trim Level Appearance Of A Vehicle
Installs In Minutes Without Tools Using Pre-Applied Automotive Grade 3M Tape
Easy Installation
Mount with 3M Tape

from

$109.99

Hood no longer opening or closing properly? This replacement hood latch assembly matches the fit and function of the original equipment hood latch and is made of corrosion-resistant materials for reliable service.

Product Features:

Direct replacement – this hood latch assembly matches the fit and function of the original equipment latch
Durable construction – corrosion-resistant housing enhances this latch’s durability and prevents functional deterioration
Easy installation – requires no special tools to replace
Quality tested – this part has undergone vehicle fitment and material testing to ensure proper fit and reliable service

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$59.99

New CAPA Certified Standard Replacement Passenger Side Fender Liner, Type 1

Product Features:

Type 1, Made Of Polyethylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$58.99

New CAPA Certified Standard Replacement Driver Side Fender Liner

Product Features:

Made Of Polyethylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$33.99

New Standard Replacement Driver Side Fender Liner

Product Features:

Made Of Polyethylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$36.99

New Standard Replacement Driver Side Fender Liner

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$36.99

New Standard Replacement Passenger Side Fender Liner, Type 1

Product Features:

Type 1, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

2020 Dodge Journey Body Parts

More 2020 Dodge Journey Body Parts Categories

Essential 2020 Dodge Journey Body Parts

Dorman – Door Lock Actuator – Integrated (Part No.931-728)

KAI – Front Bumper Cover Grille, For Crossroad Model, Made Of Tpo Plastic (Part No.CH1036139)

Burco – Heated Side View Mirror Replacement with Backing Plate (Part No.5315HRSG)

Dorman – Power Window Regulator (Regulator Only) (Part No.752-271)

Dorman – Push-Type Rocker And Fender Liner Retainer – 3/8 In. Hole (Part No.963-122D)

COAST TO COAST – Full Cover, Chrome Plated, Abs Plastic, Set Of 2 (Part No.CCIMC67492)

KAI – Grille, Matte-Black, Texture, With Chrome Molding, Made Of ABS, (Part No.CH1200330PP)

Covercraft – Custom Hood Protector (Part No.45228-01)

Carquest Premium – Door Window Switch (Part No.WSC1017)

Carquest Premium – Door Window Switch (Part No.WSC1588)

KAI – Valance Panel (Part No.CH1090139)

COAST TO COAST – Chrome Plated, Abs Plastic, With Door Handle Trim/ With Smart Key (Part No.CCIDH68560S)

KAI – Driver Side Rear Bumper Cover Reflector (Part No.CH1184100C)

KAI – New CAPA Certified Standard Replacement Passenger Side Rear Bumper Cover Reflector (Part No.CH1185100C)

Atlas Lift – Lift Support (Part No.LS10470)

StrongArm – Liftgate Lift Support: 19.65" Ext Length, 7.5" Travel, 127 Lbs of Force, 1 Pk (Part No.D6451)

KAI – Bumper Cover Support (Part No.CH1032105)

KAI – Bumper Cover Support (Part No.CH1033105)

COAST TO COAST – Direct Fit, Chrome Plated, 4 Piece (Part No.CCISM602)

Dorman – Hood Latch Assembly (Part No.820-303)

Dorman – Push-Pull Rivet-Rocker Panel – 9 mm Hole, 22 mm Stem, 15 mm Head (Part No.963-093D)

KAI – Fender Liner (Part No.CH1249141C)

KAI – Fender Liner (Part No.CH1248141C)

KAI – Front Driver Side Fender Liner, Type 2, Made Of Plastic (Part No.CH1248167)

KAI – Fender Liner (Part No.CH1248141)

KAI – Fender Liner (Part No.CH1249141)

Popular 2020 Dodge Journey Body Parts Categories

2020 Dodge Journey Body Parts

Top-Rated Body Parts Brands For Your 2020 Dodge Journey

Popular KAI Body Parts

FAQs for 2020 Dodge Journey Body Parts

What are the most purchased Body Parts for the 2020 Dodge Journey?