2020 Chevrolet Tahoe Air Intakes
More 2020 Chevrolet Tahoe Air Intakes Categories
If you’re looking for an original Air Intakes replacement for a 2020 Chevrolet Tahoe, you can search through our selection below. You’ll also find aftermarket and OEM Air Intakes to meet your needs.
Essential 2020 Chevrolet Tahoe Air Intakes
aFe POWER – Throttle Body Spacer (Part No.46-34003)
from
$139.99
Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers.
Product Features:
See More
Product Features:
- Precision Machined From T-6061 Billet Aluminum
- Special Helix Design
- Produces Increased HP/Torque/Throttle Response
- Fits w/aFe Intakes
aFe POWER – Throttle Body Spacer (Part No.46-34001)
from
$139.99
Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers.
Product Features:
See More
Product Features:
- Precision Machined From T-6061 Billet Aluminum
- Special Helix Design
- Produces Increased HP/Torque/Throttle Response
- Fits w/aFe Intakes
aFe POWER – Throttle Body Spacer (Part No.46-34008)
from
$139.99
Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers.
Product Features:
See More
Product Features:
- Durable 6061-T6 Billet Aluminum
- Creates Turbulence
- Removes Whistle
- Increased Horsepower
ACDelco – GM Original Equipment Intake Manifold Gasket Set (Part No.A8043431450ACD)
from
$117.27
ACDelco offers a full line of quality GM OE intake manifold gaskets that meet Original Equipment standards. When you’re in need of intake gaskets and gasket sets, look to ACDelco for quality, value and guaranteed performance. Validated by GM Engineering which assures proper form, fit and function. This is important on high labor-hour manifold repairs.
Product Features:
See More
Product Features:
- Both upper and lower intake manifolds with matching gaskets sets available.
- Only ACDelco and GM offer complete later model GM coverage.
- Design enhanced to incorporate updates, upgrades and Technical Service Bulletins (TSBs.)
Victor Reinz – Intake Manifold Gasket Set: Multi Piece Set (Part No.11-10257-01)
from
$48.49
Product Features:
See More
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- For those who demand the maximum durability and reassurance of steel carrier gasket designs, Victor Reinz offers a broad range of MaxDry STL gaskets.
- It is critical that the molded rubber sealing areas resist all the possible fuels, coolants and oil formulations used in these vehicles. Victor Reinz engineers have utilized only premium grade FKM synthetic rubber for this purpose.
- Coverage includes GM, Ford, Toyota, Nissan, and Mazda vehicles.
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 97126)
from
$77.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Mr. Gasket – Intake Gasket (Part No.136G)
from
$43.99
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material
- Provides excellent sealing and durability
- Die-cut for an excellent fit
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98000 T)
from
$82.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- STRONG AND DURABLE — Features molded rubber over an aluminized steel carrier which resists high heat and coolants
- SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
- EASIER TO INSTALL — Locating tabs assure proper alignment and easier installation
- PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
GM Genuine Parts – Throttle Body: New, Original Equipment (Part No.12679524)
from
$379.99
GM Genuine Parts Fuel Injection Throttle Bodies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These throttle bodies are located on the intake manifold, and contain the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) systems. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Helps provide air flow for proper fuel/air mixture
- Allows for a quick throttle response
- Assists in cold engine starts
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Dorman – Electronic Throttle Body: New (Part No.977-316)
from
$201.99
When a vehicle idles roughly, displays a malfunction indicator lamp or sets DTCs, the cause might be oil ingress or dirt and carbon buildup in the electronic throttle body. This 100% new electronic throttle body is designed to match the fit and function of the original equipment throttle body on specified vehicles. It features a non-contact Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to help prevent future failures.
Product Features:
See More
Product Features:
- Upgraded design – this plug-and-play replacement throttle body features a contactless Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to prevent future failures
- New construction – 100% new case aluminum, not remanufactured, for reliability and the convenience of no core charge
- Rigorously tested – complies with Federal Motor Vehicle Safety Standards (FMVSS) and endurance-proven with over 1 million cycle tests
- Trustworthy quality – vehicle try-on tested, and backed by a team of product experts in the United States and more than a century of automotive experience
Hitachi – Electronic Throttle Body: New (Part No.ETB0067)
from
$252.99
Hitachi’s Electronic Throttle Bodies (ETBs) are designed to provide extraordinary accuracy with quick response times. High quality materials ensure that even under the most extreme conditions, Hitachi’s ETBs will not deform or malfunction. Precision Throttle Position Sensor (TPS) Circuitry maintains accurate engine mapping resulting in optimal fuel economy and performance with the lowest possible emissions. Details such as internal gear sizes, tooth count, materials, and protected circuitry provide a durable and reliable product. Designed to meet the exact needs of each specific vehicle, Hitachi’s electronic throttle bodies are the premium choice.
Product Features:
See More
Product Features:
- Advanced throttle position sensor technology ensures smooth idle conditions and precise air flow metering
- Hitachi is a Tier 1 OE supplier for Throttle bodies
- 100% NEW, never remanufactured
- Precision TPS Circuitry maintains accurate engine mapping; Pemium componentry allows for extended durability; Tailored for each vehicle to reduce install times.
- These quality Electronic Throttle Bodies feature precise throttle opening, improved fuel economy and reduced emissions.
- Powerful electric motor provides quick and accurate response for optimal engine efficiency
- Electronics are sealed to prevent contamination that may result in inaccurate readings
- Detailed manufacturing tracking system using QR codes
Cardone – Electric Throttle Body: Remanufactured (Part No.67-3010)
from
$471.99
Every CARDONE Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.
Product Features:
See More
Product Features:
- Each unit is disassembled and meticulously inspected. Each component is inspected, remanufactured or replaced resulting in reliable and consistent performance.
- A specialized component cleaning process prevents the throttle bore surface from being deformed, ensuring optimum air flow.
- The high and low integrated throttle position sensors are tested to match O.E. characteristics throughout the entire operational range.
- Final assemblies are tested for all critical functions, including response time and air flow at multiple points.
- Each unit is guaranteed to fit and function like the original – at a fraction of the typical market price.
Dorman – Electronic Throttle Body: New (Part No.977-014)
from
$317.99
When a vehicle idles roughly, displays a malfunction indicator lamp or sets DTCs, the cause might be oil ingress or dirt and carbon buildup in the electronic throttle body. This 100% new electronic throttle body is designed to match the fit and function of the original equipment throttle body on specified vehicles. It features a non-contact Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to help prevent future failures.
Product Features:
See More
Product Features:
- Upgraded design – this plug-and-play replacement throttle body features a contactless Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to prevent future failures
- New construction – 100% new case aluminum, not remanufactured, for reliability and the convenience of no core charge
- Rigorously tested – complies with Federal Motor Vehicle Safety Standards (FMVSS) and endurance-proven with over 1 million cycle tests
- Trustworthy quality – vehicle try-on tested, and backed by a team of product experts in the United States and more than a century of automotive experience
ACDelco – GM Original Equipment Fuel Injection Throttle Body Gasket (Part No.C7001292622ACD)
from
$11.32
The ACDelco GM Original Equipment Fuel Injection Throttle Body Gasket is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.
Product Features:
See More
Product Features:
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.60903)
from
$9.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
ACDelco – GM Original Equipment Fuel Injection Throttle Body Gasket (Part No.C7001291899ACD)
from
$44.77
The ACDelco GM Original Equipment Fuel Injection Throttle Body Gasket is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.
Product Features:
See More
Product Features:
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61070)
from
$8.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Edelbrock – Performer Intake Manifold for 1987-95 Small-Block Chevy, Black Finish (Part No.21043)
from
$463.99
Edelbrock part #21043 Performer intake manifold is designed for street 262-400 c.i.d. Chevy V8’s that have heads with canted center bolt holes, 1987-1995. This Manifold accepts late-model water neck, air-conditioning, alternator, H.E.I., has rear water cr
Product Features:
See More
Product Features:
- Idle-5500 RPM Range
- Dual Plane Type-4150 Style Flange
- 3.5 in. Front Height, 4.05 in. Center Height, 4.6 in. Rear Height
- Black Powder Coated Finish
- Made In The USA
Dorman – Plastic Intake Manifold – Includes Gaskets (Part No.615-183)
from
$572.99
This engine intake manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It is thoroughly tested to ensure top-quality OEM construction and superior reliability.
Product Features:
See More
Product Features:
- Ideal replacement – this intake manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – tested to ensure top-quality OEM performance and durability
- Perfect fit – designed to match all specifications of the original part for convenient, trouble-free installation
- Trustworthy design – built by the industry leader in aftermarket manifolds
ACDelco – Intake Manifold (Part No.B1200580190ACD)
from
$360.82
Intake Manifold
Edelbrock – Performer Intake Manifold for 1987-95 Small-Block Chevy, Polished Finish (Part No.21041)
from
$627.99
Product Features:
See More
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 Deg Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
- Accepts Late-Model Choke; Waterneck; and HEI
- Accepts A/C And Alternator
- Accepts Exhaust Heated Chokes
ACDelco – GM Original Equipment Intake Manifold Assembly (Part No.B1200580202ACD)
from
$293.54
The ACDelco GM Original Equipment Engine Intake Manifold is a GM-recommended replacement for your vehicle’s original component. The intake manifold evenly distributes the incoming engine air to each of the cylinders, ensuring the proper amount of air mixes with the proper amount of fuel. This original equipment engine intake manifold has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Thermoplastic, aluminum, and cast iron intake manifolds available for a wide range of applications
- Designs are enhanced and amended to incorporate updates, upgrades, and Technical Service Bulletins
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
GM Genuine Parts – SEAL,THROT BODY (Part No.217-2424)
from
$33.99
GM Genuine Parts Fuel Injection Throttle Body Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide an air- and liquid-tight connection between throttle body components, and are GM-recommended replacements for your vehicle’s original components. Replace this seal whenever you service the throttle body. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps prevent excess air form entering the intake
- Helps seal the intake and throttle from the elements
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
GM Genuine Parts – Fuel Injection Throttle Body O-Ring (Part No.12639086)
from
$11.79
GM Genuine Parts Fuel Injection Throttle Body Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide an air- and liquid-tight connection between throttle body components, and are GM-recommended replacements for your vehicle’s original components. Replace this seal whenever you service the throttle body. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps prevent excess air form entering the intake
- Helps seal the intake and throttle from the elements
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
GM Genuine Parts – Fuel Injection Throttle Body Seal (Part No.17113561)
from
$19.99
GM Genuine Parts Fuel Injection Throttle Body Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide an air- and liquid-tight connection between throttle body components, and are GM-recommended replacements for your vehicle’s original components. Replace this seal whenever you service the throttle body. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps prevent excess air form entering the intake
- Helps seal the intake and throttle from the elements
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Popular 2020 Chevrolet Tahoe Air Intakes Categories
2020 Chevrolet Tahoe Air Intakes
You count on your 2020 Chevrolet Tahoe to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Air Intakes. With 8 Air Intakes ranging in price from $11.79 to $360.82, you’re sure to find everything you need for your 2020 Chevrolet Tahoe.
Brands matter. If you want to shop a specific Air Intakes brand, we stock 6 different brands like Felpro, ACDelco, and aFe POWER. 2020 Chevrolet Tahoe Air Intakes start as low as $11.79!
Did we mention you can order your Air Intakes from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Air Intakes inventory for your 2020 Chevrolet Tahoe below to get started!
FAQs for 2020 Chevrolet Tahoe Air Intakes
What are the most purchased Air Intakes for the 2020 Chevrolet Tahoe?
Out of 8 Air Intakes for the 2020 Chevrolet Tahoe, the most popular in our inventory are:
from
$11.79
This product is not rated
Fuel Injection Throttle Body O-Ring
Fuel Injection Throttle Body Seals
