2020 Chevrolet Silverado 2500 HD Ignition and Tune-Up Products

Essential 2020 Chevrolet Silverado 2500 HD Ignition and Tune-Up Products

ACDelco – Premium Double Platinum Tip Copper Core Spark Plug: Long-Lasting Performance & Durability (Part No.41-805)

Premium Double Platinum Tip Copper Core Spark Plug: Long-Lasting Performance & Durability

from

$9.79
ACDelco Gold (Professional) Double Platinum Spark Plug are a high quality alternative to Original Equipment (OE) parts. With a copper core and double platinum pads on the center electrode, these plugs are designed to deliver long-lasting performance. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:
  • One-piece, fired-in suppressor seal blends three glass types for a gas-tight seal that helps reduce radio frequency and engine interference, regulate spark plug energy, and protect against compression pressures for long life
  • Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system
  • Pure copper core results in cooler electrode temperature for maximized durability and fouling resistance
  • Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
  • Premium aftermarket replacement part
  • Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
  • Double Platinum Pads: Features double platinum pads on the center electrode for enhanced durability and long-lasting performance.
  • Backed by General Motors: These premium spark plugs are supported by the trusted quality of General Motors.
See More

Champion – Double Platinum & Power Spark Plug Exceptional Perf OE Replacement RS14PMP4 (Part No.7015)

Double Platinum & Power Spark Plug Exceptional Perf OE Replacement RS14PMP4

from

$3.99
Champion® Double Platinum Power¿ spark plugs deliver more powerful performance. Featuring exclusive Heat-Active¿ alloy, platinum fine wire center electrode and platinum pad ground electrode provide maximum life and sharper spark focus.

Product Features:
  • Double Platinum Power – Premium Spark Plug. More Powerful Performance.
  • Platinum center and ground electrode for greater wear resistance
  • Maintains stable operating temperature under all engine loads
  • Fine-wire center electrode for greater ignitability
  • V-trimmed ground electrode promotes sharper spark focus
  • Heat-Active┐ alloy allows electrodes to reach optimal temperature
See More

Autolite – Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration (Part No.AP5243)

Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration

from

$4.79
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Platinum spark plugs provide a center wire platinum firing tip which provides reduced gap erosion, fewer misfires, better performance and increased durability. Consider upgrading to Autolite Double Platinum or Iridium XP spark plugs for increased performance.

Product Features:
  • High nickel alloy side electrode maintains precise gap
  • Full platinum tip assures virtually no gap erosion for long life
  • Necked-down center electrode fires quicker, cleaner with less voltage for easier starts, quicker acceleration and improved fuel economy (as compared to standard plugs)
See More

NGK – OE Series Laser Platinum Spark Plug: Fine Wire Tip Design, PZTR5A-15 (Part No.7862)

OE Series Laser Platinum Spark Plug: Fine Wire Tip Design, PZTR5A-15

from

$13.29
NGK Laser Platinum spark plugs provide high ignitability and longer service life compared to conventional nickel spark plugs. Laser Platinum plugs are tested to the highest standards to ensure quality and durability. Engineered specifically for OE applications. Laser platinum plugs provide stable idling, superior anti-fouling, improved fuel efficiency and lower emissions. High-grade pure alumina ceramic and 98% pure copper core prevents spark plug from overheating and provides reliable starts. Most Laser Platinum spark plugs feature a platinum pad on the ground electrode for even wear in distributorless ignition systems.

Product Features:
  • ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire platinum alloy center electrode provides consistent performance
  • PLATINUM ALLOY CENTER ELECTRODE: Longer wearing and higher temperature resistance compared to traditional nickel spark plugs
  • PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Best for vehicles with OE fine wire platinum alloy plugs
See More

GM Genuine Parts – Glow Plug (Part No.63G)

Glow Plug

from

$23.99
GM Genuine Parts Diesel Glow Plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

GM Genuine Parts – Diesel Glow Plug: Engineered for Optimal Cold Starts (Part No.9G)

Diesel Glow Plug: Engineered for Optimal Cold Starts

from

$20.99
GM Genuine Parts Diesel Glow Plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These true OE parts, which may have formerly appeared as ACDelco GM Original Equipment (OE), are specifically designed and validated by GM engineers for your Chevrolet, Buick, GMC, or Cadillac vehicle. GM regularly updates production and service part designs to integrate new materials and technologies, ensuring optimal performance and reliability. Featuring a conical seat type, these glow plugs are essential for achieving optimal cold starts in your diesel engine.

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
  • Engineered for Optimal Cold Starts: Designed to ensure your diesel engine starts smoothly in cold conditions, providing reliable performance when you need it most.
  • Conical Seat Type: Features a conical seat type for a precise fit and optimal function in your diesel engine.
See More

Autolite – Diesel Engine Glow Plug: High Intensity Concentrated Heat, Reliable Starts (Part No.1120)

Diesel Engine  Glow Plug: High Intensity Concentrated Heat, Reliable Starts

from

$14.99
Starting a diesel engine? Check out Autolite glow plugs. They’re dependable and long-lasting, the perfect plug for a variety of diesel applications. Diesel engines depend on high heat in the combustion chamber to ignite the fuel. When you cold start a diesel engine, there isn’t enough heat to ignite. Autolite glow plugs warm the combustion chamber to start the fuel ignition, reaching temperatures hot enough to start in 30 seconds or less. If you’re experiencing problems starting your diesel engine, it may have burnt out glow plugs. For dependability and long-lasting performance, use Autolite glow plugs.

Product Features:
  • Diesel engines depend on high heat in the combustion chamber to ignite the fuel. When you cold start a diesel engine, there isn’t enough heat to ignite. Glow plug warms the combustion chamber to start the fuel ignition.
  • These glow plugs fit a variety of diesel applications. If you’re experiencing problems starting your diesel engine, it may have burnt out glow plugs.
  • Reaches temperatures hot enough to start in 30 seconds or less
  • For dependability and long-lasting performance, use Autolite glow plugs
  • High Intensity Concentrated Heat: Autolite glow plugs generate intense heat to ensure reliable ignition in diesel engines, even in cold conditions.
  • Durable Construction: Engineered to withstand the rigors of diesel engine operation, providing consistent performance over time.
See More

Autolite – Diesel Engine Glow Plug: High Intensity Concentrated Heat, Reliable Starts (Part No.1113)

Diesel Engine  Glow Plug: High Intensity Concentrated Heat, Reliable Starts

from

$19.99
Starting a diesel engine? Check out Autolite glow plugs. They’re dependable and long-lasting, the perfect plug for a variety of diesel applications.

Product Features:
  • Diesel engines depend on high heat in the combustion chamber to ignite the fuel. When you cold start a diesel engine, there isn’t enough heat to ignite. Glow plug warms the combustion chamber to start the fuel ignition.
  • These glow plugs fit a variety of diesel applications. If you’re experiencing problems starting your diesel engine, it may have burnt out glow plugs.
  • Reaches temperatures hot enough to start in 30 seconds or less
  • For dependability and long-lasting performance, use Autolite glow plugs
See More

ACDelco – GM Original Equipment Ignition Knock (Detonation) Sensor (Part No.F6020430220ACD)

GM Original Equipment Ignition Knock (Detonation) Sensor

from

$21.74
An ACDelco GM Original Equipment Ignition Knock (Detonation) Sensor monitors the engine for pinging or spark knock, and is a GM-recommended replacement for your vehicle’s original component. The sensor creates a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion; the engine control module uses this signal to adjust the ignition timing and air/fuel mixture. This original equipment ignition knock sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Undergo the same stringent testing process as the original part
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

NTK – Ignition Knock (Detonation) Sensor (Part No.ID0300)

Ignition Knock (Detonation) Sensor

from

$22.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • Reinforced and extra-strength components are used to reduce chance of part failure and prevent corrosion and moisture penetration. Mounting threads match OE for easy, worry free installation.
  • NTK’s Ignition Knock Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper ignition timing. This advanced technology is used for durability, drivability and fuel economy.
  • The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock, or detonation, to alter the ignition timing and prevent detonation.
See More

NTK – Ignition Knock (Detonation) Sensor (Part No.ID0116)

Ignition Knock (Detonation) Sensor

from

$67.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • Reinforced and extra-strength components are used to reduce chance of part failure and prevent corrosion and moisture penetration. Mounting threads match OE for easy, worry free installation.
  • NTK’s Ignition Knock Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper ignition timing. This advanced technology is used for durability, drivability and fuel economy.
  • The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock, or detonation, to alter the ignition timing and prevent detonation.
See More

Delphi – Flat Response Knock Sensor (Part No.F6020352539DEL)

Flat Response Knock Sensor

from

$82.77
As a global leader in engine and powertrain management systems technology, Delphi manufactures a Flat Response Engine Knock Sensor that is 100 percent OE, providing an exact fit and superior quality. The Delphi Flat Response Knock Sensor has a flat frequency response over a range of from 1 to 18 kHz, thus the same sensor can be used on different engines by simply adjusting the filter frequency of the signal processing electronics to match the knock frequency of the engine. In addition, the sensor responds to knock frequencies higher than the primary knock frequency. This allows the higher knock frequencies to be used by a control system, either individually or combined with the primary knock frequency

Product Features:
  • Self-generating piezoelectric design requires no power to the sensor
  • Flat frequency response allows the same senor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
  • Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
  • Large mounting hole accommodates mounting bolts up to 10mm in diameter
See More

ACDelco – Original Equipment Ignition Wire (Part No.F1030575906ACD)

Original Equipment Ignition Wire

from

$22.14
Built to match the original equipment in length and fit, ACDelco OES Ignition Wires offer a performance advantage over many aftermarket products.

Product Features:
  • ACDelco ignition wires are designed to be like Original in critical areas such as cable length and diameter, terminal design and insulator position
  • Have broad coverage available for most vehicles on the road today from 1980 to present
  • Provide a high degree of Radio Frequency Interference (RFI) suppression
  • Are designed to offer fit, form and function for optimum performance
  • Kevlar reinforced fiberglass core in select sets for increased strength
  • Core sheathed in radio-static absorbent material for increased RFI suppression
  • Wire-wound, stainless steel alloy conductor for maximum spark delivery and RFI suppression on most applications
  • A layer of conductive heat-resistant latex for added durability
  • Insulating rubber-based compound inner jacket helps minimize voltage drop and enhance durability
  • Thick silicone outer jacket for excellent heat resistance
  • Limited lifetime warranty*
See More

ACDelco – Specific FitSpark Plug Wire (Part No.349V)

Specific FitSpark Plug Wire

from

$19.99
ACDelco GM Original Equipment Spark Plug Wires consist of a single wire, encased in an insulating material, connectors, and insulating boots, and are GM-recommended replacements for your vehicle’s original components. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plug. These original equipment wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Durable to help transfer high voltage pulses without damage
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

ACDelco – Spark Plug Wire (Part No.350R)

Spark Plug Wire

from

$24.99
ACDelco GM Original Equipment Spark Plug Wires consist of a single wire, encased in an insulating material, connectors, and insulating boots, and are GM-recommended replacements for your vehicle’s original components. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plug. These original equipment wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Durable to help transfer high voltage pulses without damage
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

ACDelco – Spark Plug Wire (Part No.357D)

Spark Plug Wire

from

$31.99
ACDelco GM Original Equipment Spark Plug Wires consist of a single wire, encased in an insulating material, connectors, and insulating boots, and are GM-recommended replacements for your vehicle’s original components. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plug. These original equipment wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Durable to help transfer high voltage pulses without damage
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Ignition Switch (Part No.CSA1039)

Ignition Switch

from

$46.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Ignition Switch (Part No.CSA1116)

Ignition Switch

from

$42.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Ignition Switch (Part No.CS643)

Ignition Switch

from

$44.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Copper alloy conductors ensure superior electrical conductivity with low resistive losses
  • Our parts are 100% tested to verify both mechanical and electrical switching performance
  • Robust design and high grade materials meet the stringent demands of today’s service professional
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

GM Genuine Parts – Ignition Switch (Part No.D1485F)

Ignition Switch

from

$51.99
GM Genuine Parts Ignition Starter are designed, engineered, and tested to rigorous standards, and are backed by General Motors. It is a multi-position switch that activates the ignition, accessory, and cranking circuits in your vehicle. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Work with vehicle electronics to help optimize vehicle capabilities
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

DENSO – Spark Plug Wire Set: Aluminum Steel Core, 8 Wire Set (Part No.671-8063)

Spark Plug Wire Set: Aluminum Steel Core, 8 Wire Set

from

$95.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

ACDelco – Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core (Part No.9748RR)

Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core

from

$92.99
ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

ACDelco – Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core (Part No.9748FF)

Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core

from

$90.99
ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Accel – Pc Wire Set 98-08 GM 8-Cyl (Part No.118063)

Pc Wire Set 98-08 GM 8-Cyl

from

$66.99
Pc Wire Set 98-08 GM 8-Cyl

Carquest – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.26C1047)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$55.99
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
  • Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

ACDelco – Ignition Coil (Part No.D581)

Ignition Coil

from

$76.99
An ACDelco GM Original Equipment Ignition Coil is a GM-recommended replacement for your vehicle’s original component, and undergoes more stringent testing than aftermarket products. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco GM OE Ignition Coil uses pure copper windings to improve durability and provide higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This original equipment ignition coil has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
  • Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
  • Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Accel – Coil:GM Ls2 Ls3 Ls7 (Part No.140043)

Coil:GM Ls2 Ls3 Ls7

from

$79.99
ACCEL Super Coils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct high performance replacements for OEM coils.

Product Features:
  • These coils feature advanced bobbin technology.
  • Highly specialized silicone magnetic steel cores with optimized windings
  • Specialized high temperature epoxy filled housings resists shock, vibration, chemicals, and overall engine bay environment.
  • These are a direct performance bolt on upgrade.
  • The ACCEL bodies are molded in a high dielectric strength material.
See More

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1368)

Ignition Coil: Meets or Exceeds OE Specifications, 1 Count

from

$51.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

2020 Chevrolet Silverado 2500 HD Ignition and Tune-Up Products

You count on your 2020 Chevrolet Silverado 2500 HD to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 21 Ignition and Tune-Up Products ranging in price from $6.49 to $137.99, you’re sure to find everything you need for your 2020 Chevrolet Silverado 2500 HD.

Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 7 different brands like E3, NGK, and Autolite. 2020 Chevrolet Silverado 2500 HD Ignition and Tune-Up Products start as low as $6.49!

One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 1,064 extensive product reviews on 2020 Chevrolet Silverado 2500 HD Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Laser Iridium Spark Plug – Superior Performance & Longevity with 4.0 stars.

Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 2020 Chevrolet Silverado 2500 HD below to get started!

Top-Rated Ignition and Tune-Up Products Brands For Your 2020 Chevrolet Silverado 2500 HD

Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2020 Chevrolet Silverado 2500 HD running right for years to come. In our inventory you’ll find brands like E3, NGK, Autolite, and even more.

Popular NGK Ignition and Tune-Up Products

You’ll find popular NGK brand products across Spark Plugs. All are waiting to get your 2020 Chevrolet Silverado 2500 HD back on the road. Some of the top-rated NGK products in these categories are:

Top-Rated Ignition and Tune-Up Products


If are what you’re looking for, our inventory holds plenty. We stock brand Ignition and Tune-Up Products for your 2020 Chevrolet Silverado 2500 HD, and some of our most reviewed parts include:

FAQs for 2020 Chevrolet Silverado 2500 HD Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the 2020 Chevrolet Silverado 2500 HD?

Out of 21 Ignition and Tune-Up Products for the 2020 Chevrolet Silverado 2500 HD, the most popular in our inventory are:

What are the top-rated 2020 Chevrolet Silverado 2500 HD Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your 2020 Chevrolet Silverado 2500 HD based on customer reviews/ratings are:
Laser Iridium Spark Plug - Superior Performance & Longevity
from $10.29
(1)
Laser Iridium Spark Plug – Superior Performance & Longevity
“After replacement, easy start, powerful sound, and easy accelerate.”