Name: Multi-Port Fuel Injector
Brand: ACDelco
SKU: 17113698
Price: 113.99 USD

from

$113.99

ACDelco GM Original Equipment Fuel Injectors are electro-magnetic valves that meter fuel into the engine’s intake manifold or cylinders for combustion, and are GM-recommended replacements for your vehicle’s original components. The engine control module (ECM) operates the injector by applying an electric current to the injector solenoid winding, causing the needle valve to open, and allowing pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
Allows for a quick throttle response
Assists in cold engine starts
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$12.49

To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$36.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$5.79

GM Genuine Parts Fuel Pressure Sensor Covers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$69.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank straps meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our expertise
Direct fit ensures safe, secure fuel tank installation
Product individually packaged and labeled to help reduce product damage prior to installation
Industry leading coverage on straps for plastic tanks

from

$61.99

Delphi MAP sensors use the latest OE technology; Internally protected against moisture intrusion and vibration; Manufactured to meet or exceed OE requirements for 100,000 miles.

Product Features:

Insulated with silicone gel over the integrated circuit chip to protect against shock and vibration for increased durability
Internally protected against moisture intrusion and vibration
Long lasting and durable
Designed and engineered with Delphi expertise

from

$50.99

ACDelco GM Original Equipment Vapor Canister Vent Valves are GM-recommended replacements for your vehicle’s original components. These valves, when opened, allow air to pass in and out of the vapor canister vent. These original equipment vapor canister vent valves have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Controls fresh air flow to the canister
Sends fuel vapors to the engine for re-burn
Helps control fuel tank pressure
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$309.99

GM Genuine Parts Fuel Injection Throttle Control Actuator Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These modules are electrically operated motor assemblies that control throttle plates. They receive an electrical signal from the engine control module and open throttle plates based on input from the accelerator pedal module. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$12.99

GM Genuine Parts Multi Purpose Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$75.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.
The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.

from

$12.49

This fuel tank attaching hardware is designed to match the fit and function of the original hardware on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel tank attaching hardware is designed to match the fit and function of the original hardware on specified vehicles
Recommended replacement for the original hardware when servicing or replacing the fuel tank
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$11.49

GM Genuine Parts Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These relays help connect or disconnect power to a vehicle accessory when it receives a low voltage signal from a switch. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps connect or disconnect power to vehicle accessories
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$187.39

All Delphi Air Mass Sensors feature a patented dimpled flow management feature that provides better control of air separation for more consistent air flow across the sensing elements and enabling outstanding performance in application-specific ducting.

Product Features:

Platinum-coated ceramic heated sensing element design is smaller and less fragile than competitive products
Heated sensing elements are very robust to damage from dust impingement
Heated sensing elements offer proven durability with more that 130 million in the field over the past 16 years
Patented temperature compensation algorithm offers robustness to changes in ambient air temperature
Patented dimple design eliminates the need for a flow straightener in most applications
Probe design offers low restriction air measurement driving increased horsepower
Interchangeability is enabled by common mounting footprint

from

$12.37

Ambient Temp Sensor

from

$13.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$85.27

The ACDelco GM Original Equipment Oxygen (O2) Sensor is a GM-recommended replacement for your vehicle’s original component. The Oxygen (O2) Sensor is a special feedback sensor on your vehicle’s exhaust system. This sensor measures the proportion of oxygen in the exhaust gases. Using this measurement, the engine management computer can adjust the air/fuel ratio near the optimum value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. This original equipment oxygen sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors. When you are looking for a match to GM Original Equipment specifications in a replacement part for your GM vehicle, trust ACDelco to get the job done.

Product Features:

Detect oxygen content in the exhaust gases to optimize emissions and fuel economy
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$25.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$88.99

Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.

Product Features:

SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.

from

$15.99

Carquest Premium offers a complete line of fuel tank lock rings covering a wide variety of North American vehicle applications. Carquest Premium fuel tank lock rings are engineered to meet or exceed all OEM specifications. Carquest Premium fuel tank lock rings are precision stamped and are treated with a rust proof finish to ensure durability and strength.

Product Features:

Engineered to meet or exceed all OEM specifications
Precision stamped and are treated with a rust proof finish to ensure durability and strength

from

$17.79

A recommended replacement whenever the sending unit is serviced, this fuel tank lock ring is a direct match for the original part. Designed for a secure fit, it’s manufactured from durable materials for reliable service.

Product Features:

Direct replacement – this fuel tank lock ring matches the fit, function and performance of the original part
Ideal solution – recommended for replacement whenever the sending unit is serviced to ensure a secure connection to the fuel tank
Durable construction – manufactured from quality materials for superior service and reliability
Trustworthy design – backed by a team of product designers and engineers with over 100 years of automotive aftermarket experience

from

$44.49

GM Genuine Parts Fuel Injector Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide liquid-tight connections between the fuel injector and related components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps provide a seal to prevent fuel leaks
Helps seal combustion chamber from the elements
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$36.99

CARQUEST fuel injector seal kits include the necessary o-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

Premium OE quality materials.
Services four injectors.

from

$215.99

GM Genuine Parts Vacuum Pumps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These vacuum pumps provide a source of vacuum power for emission controls, and may be electrically or mechanically operated, depending on vehicle application. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps prevent the effects of engine blow-by
Assists in minimizing premature oil contamination
Operates blower air direction controls for A/C and heat
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$246.99

This vacuum pump matches the fit and function of the original equipment pump. Made of durable materials for reliable service, this replacement pump is built to ensure reliable operation of vacuum-operated vehicle functions.

Product Features:

Ideal replacement – this vacuum pump matches the fit and function of the original equipment pump to restore operation of vacuum-operated functions
Durable construction – this vacuum pump is made of quality materials to ensure reliable performance and a long service life
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$15.30

The ACDelco GM Original Equipment Fuel Pump Tank Seal is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:

GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$39.99

This fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles
Restores functionality – reliable replacement for an original part that has failed due to fatigue or due for replacement during fuel pump tank service
Durable construction – recommended for replacement when the fuel pump or sensor is replaced
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$60.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$51.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

Fuel Tank Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper pressure within the fuel tank and help detect leaks.
The Fuel Tank Pressure Sensor reports the ambient pressure in the fuel tank and evaporative emission system so that the PCM may detect evaporative system leaks.