2020 Audi A4 Quattro Fuel and Emissions Systems

All Bosch High Pressure Sensors provide very reliable and accurate measurements and have extremely fast response times to ensure your vehicle runs as intended.

Product Features:

• Built-in circuit protection to ensure your electronics and computer systems stay unharmed
• High reliability of pressure sensing proved in gasoline and diesel direct injection systems
• Sturdy design, vibration resistant and thermal stability

All Bosch High Pressure Sensors provide very reliable and accurate measurements and have extremely fast response times to ensure your vehicle runs as intended.

Product Features:

• Built-in circuit protection to ensure your electronics and computer systems stay unharmed
• High reliability of pressure sensing proved in gasoline and diesel direct injection systems
• Sturdy design, vibration resistant and thermal stability

Automobiles in the 21st century have replaced the more conventional throttle cable technology for an ECM (Electronic Control Module) that translates pedal travel into electronic signals in order to provide power to the wheels. The ETC system (Electronic Throttle Control), also known as drive-by-wire, has the unfortunate downside of delayed throttle response and subdued acceleration, creating problems in certain circumstances such as up-hill starts, quick gear changes, overtaking, etc. The Sprint Booster aims to overcome this throttle response delay for ETC-equipped vehicles, providing crisp on-tap acceleration at the driver’s disposal.

Product Features:

• Reduces Throttle Response Time
• Improves Acceleration
• Easy To Install
• Does Not Affect The Vehicles Electronic System

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, NTK uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

• OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
• PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
• OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
• EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
• EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
• ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
• NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.; Each component is precision-built for exact replacement+ and a first time fit.; DENSO gives you the right part and the right fit+ the first time.

Product Features:

• Specifically designed to meet the increasing demands of today’s engines
• 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
• Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
• Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
• Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• Designed to OE standards for ease of installation

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• Designed to OE standards for ease of installation
• High-quality materials withstand extreme conditions
• Undergoes extensive testing to ensure reliability
• As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

• Premium OE quality materials
• Services one injector

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

• Premium OE quality materials
• Services one injector

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Product Features:

• Each unit is 100% tested to OE specifications
• Includes new o-rings and seals made of premium OE quality materials
• Includes application specific technical bulletin, where applicable

CARQUEST’s line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and o-rings.

Product Features:

• Each unit is 100% tested to OE specifications.
• Includes new o-rings and seals made of premium OE quality materials.
• Includes application specific technical bulletin, where applicable.

Hitachi’s Fuel Injectors (FIJs) are designed to optimize fuel economy and performance by providing extraordinary accuracy and application specific spray patterns with quick response times. Hitachi’s high-speed electromagnet and pintle precisely control the flow of fuel. High quality materials ensure that even under the most extreme conditions, Hitachi’s FIJs will not deform or malfunction. Our FIJs are 100% flow tested for ideal performance and are calibrated for each application ensuring your vehicle meets the strict emission standards set by the OE manufacturer. Designed to meet the exact needs of each specific vehicle, Hitachi’s Fuel Injectors are the premium choice. Hitachi is a Tier One OE supplier to the largest automobile manufacturers globally, delivering industry leading quality, and exceeding customer expectations with our products and service. Hitachi is bringing that same knowledge and expertise to the premium products we deliver in the Aftermarket because Quality Matters.

Product Features:

• Hitachi is a Tier 1 OE supplier for fuel injectors
• 100% NEW, never remanufactured
• Meets the OE performance and durability standards for this application
• 100% flow tested for ideal performance
• High-speed electromagnet and pintle for precise fuel dispersion
• Application specific spray patterns for optimized fuel efficiency and performance
• O-Ring included when applicable

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

• OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
• PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
• OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
• EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
• EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
• ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
• NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

• OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
• PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
• OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
• EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
• EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
• ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
• NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.

Product Features:

• Specifically designed to meet the increasing demands of today’s engines
• 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
• Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
• Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
• Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function

Throttle Body Gasket

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:

• Helps avoid premature fuel pump failure
• Lint free towel included
• Low suds formulation
• Removes harmful contaminants from the fuel tank

Bosch Manifold Absolute Pressure (MAP) Sensors provide accurate air pressure measurement to very fine tolerances for efficient engine performance.

Product Features:

• Extremely sturdy design with a special coating for resistance of harmful chemicals inside the intake manifold.
• Bosch continually improves its MAP sensor designs with the latest chip technology.
• Designed to meet or exceed your vehicle’s original equipment specifications (performance, driveability, economy, emissions)

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

• CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
• CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
• CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

• CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
• CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
• CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

MAP Sensor

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

• Capable of delivering fuel at high pressures that can range from 2,000-2,800 PSI
• Mechanically driven high fuel flow pump enables rail pressure build up quickly for fast start times
• Fuel delivered directly into the engine combustion chamber for increased horsepower and fuel economy
• Meets OE specifications

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

• Capable of delivering fuel at high pressures that can range from 2,000-2,800 PSI
• Mechanically driven high fuel flow pump enables rail pressure build up quickly for fast start times
• Fuel delivered directly into the engine combustion chamber for increased horsepower and fuel economy
• Meets OE specifications

Hitachi’s High Pressure Fuel Pumps (HPPs) are designed to enhance fuel volume delivery for exceptional operation and faster vehicle response. Our HPPs are a good alternative to the standard fuel pump for direct injection, supercharged, and turbocharged applications commonly found in todays vehicles. Pump housing is made of high strength aluminum to ensure durability while keeping weight low. Precision machined surfaces prevent fuel leakage/pressure drop while chemical resistant seals prevent premature wear from ethanol mixed fuels. Designed to meet the exact needs of each specific vehicle, Hitachi’s High Pressure Fuel Pumps are the premium choice. Hitachi is a Tier One OE supplier to the largest automobile manufacturers globally, delivering industry leading quality, and exceeding customer expectations with our products and service. Hitachi is bringing that same knowledge and expertise to the premium products we deliver in the Aftermarket because Quality Matters.

Product Features:

• These quality High Pressure Pumps provide exceptional operation with enhanced fuel volume delivery and faster vehicle response. Promotes a rise of fuel pressure from startup; reduces current consumption.
• Hitachi is a Tier 1 OE supplier for high pressure fuel pumps
• 100% NEW, never remanufactured
• Meets the OE performance and durability standards for this application
• High strength aluminum housing for light weight and durability
• Chemical resistant seals prevent premature wear from ethanol mixed fuels
• Precision machined surfaces prevent fuel leakage and subsequent pressure drop
• O-Ring/Gaskets included when applicable

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

• Capable of delivering fuel at high pressures that can range from 2,000-2,800 PSI
• Mechanically driven high fuel flow pump enables rail pressure build up quickly for fast start times
• Fuel delivered directly into the engine combustion chamber for increased horsepower and fuel economy
• Meets OE specifications