2019 Ford Ranger Ignition and Tune-Up Products

Essential 2019 Ford Ranger Ignition and Tune-Up Products

Autolite – Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life (Part No.APP5144)

Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life

from

$6.49
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.

Product Features:
  • Works to optimize engine performance for a longer life and improved fuel economy
  • OE design
  • Full-platinum tips; platinum on both the center and side electrodes to promote reduced gap wear
  • Platinum ball welding process provides a consistent point of contact for enhanced adhesion
See More

Autolite – Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration (Part No.2544)

Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration

from

$2.99
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Guaranteed to deliver quick starts, good fuel economy and smooth acceleration, Autolite Copper Core spark plugs are designed to meet or exceed OES design requirements. Consider upgrading to Autolite Platinum, Double Platinum or Iridium XP plugs for improved engine performance. Copper core plugs are the industry standard.

Product Features:
  • Copper-glass seal bonds insulator, terminal post center electrode together; assures full required voltage at spark gap; gas-tight seal (100% leak proof)
  • Multi-rib insulator reduces danger of “flash-over”
  • One-piece terminal post adds strength
  • Resistor reduces radio frequency interference (RFI) and electrode erosion
See More

DENSO – Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, IT20TT (Part No.4714)

Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, IT20TT

from

$10.99
Durability of an OE style plug combined with Power & Torque of high performance.

Product Features:
  • 0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
  • 0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
  • DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
  • DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
  • Durability of an OE style plug combined with Power & Torque of high performance.
  • Withstands temperatures greater than 4000° Fahrenheit
  • Iridium TT
See More

NGK – OE Series Laser Platinum Spark Plug: Fine Wire Tip Design, PTR5D-10 (Part No.3784)

OE Series Laser Platinum Spark Plug: Fine Wire Tip Design, PTR5D-10

from

$14.99
NGK Laser Platinum spark plugs provide high ignitability and longer service life compared to conventional nickel spark plugs. Laser Platinum plugs are tested to the highest standards to ensure quality and durability. Engineered specifically for OE applications. Laser platinum plugs provide stable idling, superior anti-fouling, improved fuel efficiency and lower emissions. High-grade pure alumina ceramic and 98% pure copper core prevents spark plug from overheating and provides reliable starts. Most Laser Platinum spark plugs feature a platinum pad on the ground electrode for even wear in distributorless ignition systems.

Product Features:
  • ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire platinum alloy center electrode provides consistent performance
  • PLATINUM ALLOY CENTER ELECTRODE: Longer wearing and higher temperature resistance compared to traditional nickel spark plugs
  • PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Best for vehicles with OE fine wire platinum alloy plugs
  • Engineered for OE Applications: Specifically designed for Original Equipment (OE) applications, ensuring a perfect fit and optimal performance.
  • Enhanced Fuel Efficiency and Lower Emissions: These spark plugs contribute to improved fuel efficiency and reduced emissions, making them an eco-friendly choice.
  • Superior Anti-Fouling and Stable Idling: The advanced design provides stable idling and superior resistance to fouling, ensuring consistent engine performance.
See More

DENSO – Double Platinum Spark Plug: OE Performance, lasts 60K+ Miles, PT16EPR10 (Part No.5091)

Double Platinum Spark Plug:  OE Performance, lasts 60K+ Miles, PT16EPR10

from

$7.99
Manufactured to the strictest OE performance, durability and emissions standards.

Product Features:
  • OE grade platinum on both center and ground electrods
  • Premium shell construction with machine-rolled threads
  • Superior thermal conductivity
  • Sustained spark performance over 60,000 miles
  • Reduced secondary required voltage, increased ignition efficiency
  • Satisfied customers, reduced shop comebacks
  • Double Platinum
See More

NGK – G-Power Spark Plug: Single Platinum Tip Design, TR5GP (Part No.3186)

G-Power Spark Plug: Single Platinum Tip Design, TR5GP

from

$6.29
NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.

Product Features:
  • SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
  • PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
  • TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
  • RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
  • Tapered Seat Type: The tapered seat type ensures a secure fit and optimal performance in compatible vehicles.
See More

NGK – OE Series Laser Iridium Spark Plug: Fine Wire Tip Design, ILTR6R8G (Part No.91794)

OE Series Laser Iridium Spark Plug: Fine Wire Tip Design, ILTR6R8G

from

$12.49
NGK Laser Iridium spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium spark plugs are tested to the highest standards to ensure quality and durability. Iridium tipped center electrode provides durability six times harder than platinum. NGKs high grade pure alumina ceramic and 98 percent pure copper core prevents the spark plug from overheating while providing reliable starts. Most Laser Iridium spark plugs feature a platinum pad on the ground electrode for even wear in distributorless ignition systems.

Product Features:
  • ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire iridium alloy center electrode provides consistent performance
  • IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
  • PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Best for vehicles with OE fine wire iridium alloy plugs
  • Superior Durability: The iridium-tipped center electrode is six times harder than platinum, ensuring long-lasting performance.
  • OE Application Specific: Engineered specifically for Original Equipment (OE) applications, ensuring a perfect fit and optimal performance.
  • Even Wear: Features a platinum pad on the ground electrode for even wear, particularly beneficial in distributorless ignition systems.
  • Fine Wire Tip Design: The fine wire tip design of the ILTR6R8G model enhances ignition efficiency and performance.
See More

Autolite – Flat Pack Spark Plug – Ensures Quick Starts and Smooth Acceleration (Part No.764)

Flat Pack Spark Plug - Ensures Quick Starts and Smooth Acceleration

from

$2.99
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Guaranteed to deliver quick starts, good fuel economy and smooth acceleration, Autolite Copper Core spark plugs are designed to meet or exceed OES design requirements. Consider upgrading to Autolite Platinum, Double Platinum or Iridium XP plugs for improved engine performance. Copper core plugs are the industry standard.

Product Features:
  • Copper-glass seal bonds insulator, terminal post center electrode together; assures full required voltage at spark gap; gas-tight seal (100% leak proof)
  • Multi-rib insulator reduces danger of “flash-over”
  • One-piece terminal post adds strength
  • Resistor reduces radio frequency interference (RFI) and electrode erosion
  • Guaranteed Quick Starts: Autolite Copper Core spark plugs are engineered to ensure quick and reliable engine starts.
  • Smooth Acceleration: Designed to provide smooth acceleration, enhancing your driving experience.
  • Good Fuel Economy: These spark plugs help in maintaining good fuel economy, making your vehicle more efficient.
  • Tapered Seat Type: Features a tapered seat type for optimal fit and performance.
See More

ACDelco – RAPIDFIRE Spark Plug (Part No.16)

RAPIDFIRE Spark Plug

from

$5.99
ACDelco Gold (Professional) RAPIDFIRE Spark Plugs are a high quality alternative to Original Equipment (OE) parts. These RAPIDFIRE Single Platinum Performance Spark Plugs are designed for everyday use and are a high quality replacement for many vehicles on the road today. These premium aftermarket spark plugs have high-quality suppressors that help prevent misfiring, an improved plug to boot seal, and a pure copper core for greater durability. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:
  • Solid state suppressor, with two-piece glass and brass seal, can help reduce radio frequency interference, regulates spark energy for long electrode life, and helps protect against high combustion pressures
  • Pure copper core provides great heat transfer and helps maximize plug durability
  • Platinum on center electrode enables superior spark characteristics and can reduce voltage requirements of the ignition system
  • Ribless insulator helps optimize plug to boot sea
  • Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
  • Premium aftermarket replacement part
  • Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
See More

Motorcraft – Original Equipment (O.E.) Switch Assembly – Ignition (Part No.SW-5011)

Original Equipment (O.E.) Switch Assembly - Ignition

from

$81.99
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:
  • Direct-fit, OE replacement parts – identical to factory installed parts. Robust design helps provide long operating life and excellent performance.
  • All OE switch functions are maintained. Factory connectors help ensure a solid, positive connection. Provided factory mounting points ensure easy installation – new gaskets and attaching hardware is included, where applicable.
See More

Carquest Premium – Ignition Switch (Part No.CSC1133)

Ignition Switch

from

$23.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Ignition Switch (Part No.CSC3797)

Ignition Switch

from

$62.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Ignition Switch (Part No.CS96)

Ignition Switch

from

$25.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Copper alloy conductors ensure superior electrical conductivity with low resistive losses
  • Our parts are 100% tested to verify both mechanical and electrical switching performance
  • Robust design and high grade materials meet the stringent demands of today’s service professional
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest – Ignition Switch (Part No.CS120)

Ignition Switch

from

$23.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Copper alloy conductors ensure superior electrical conductivity with low resistive losses
  • Our parts are 100% tested to verify both mechanical and electrical switching performance
  • Robust design and high grade materials meet the stringent demands of today’s service professional
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest Premium – Ignition Switch (Part No.CSC2484)

Ignition Switch

from

$47.99
The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
  • Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
See More

Carquest Premium – Ignition Switch (Part No.CSA1106)

Ignition Switch

from

$25.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Ignition Switch (Part No.CSA1045)

Ignition Switch

from

$28.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Ignition Switch (Part No.CS287)

Ignition Switch

from

$27.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Copper alloy conductors ensure superior electrical conductivity with low resistive losses
  • Our parts are 100% tested to verify both mechanical and electrical switching performance
  • Robust design and high grade materials meet the stringent demands of today’s service professional
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Delphi – Knock Sensor (Part No.AS10200)

Knock Sensor

from

$33.49
Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.

Product Features:
  • Delphi knock sensors help maximize engine performance with all fuels
  • Delphi knock sensors prevent against engine damage from pre-ignition knocking
  • Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
  • Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
  • Ground-isolated design with 2-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
  • Self-generating piezoelectric design requires no power to the sensor
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3736)

Ignition Knock (Detonation) Sensor

from

$33.99
MotoRad Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3702)

Ignition Knock (Detonation) Sensor

from

$43.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Delphi – Knock Sensor (Part No.AS10268)

Knock Sensor

from

$39.99
Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.

Product Features:
  • Delphi knock sensors help maximize engine performance with all fuels
  • Delphi knock sensors prevent against engine damage from pre-ignition knocking
  • Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
  • Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
  • Ground-isolated design with 2-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
  • Self-generating piezoelectric design requires no power to the sensor
See More

Bosch – Knock Sensor (Part No.0261231314)

Knock Sensor

from

$36.99
Bosch OE quality knock sensors for optimum engine protection and fuel consumption reduction up to 9%

Product Features:
  • Bosch OE quality knock sensors for optimum engine protection
  • Bosch OE quality knock sensors improve combustion efficiency and reduce fuel consumption up to 9%
  • Bosch OE quality knock sensors increase torque up to 5%
  • Bosch OE quality knock sensors enable the use of multiple quality fuels with various anti-knock properties
See More

Bosch – Knock Sensor (Part No.F6020200560BOS)

Knock Sensor

from

$46.43
Bosch Knock Sensors are highly accurate and sensitive to detect engine knock, ensuring efficient performance and long life of your vehicle.

Product Features:
  • High Precision Even under Extreme Conditions
  • Improved efficiency and prolonged engine life
  • Linear signal over large frequency range
See More

Carquest Premium – Premium Ignition Knock (Detonation) Sensor SBA6043 (Part No.SBA6043)

Premium Ignition Knock (Detonation) Sensor SBA6043

from

$66.99
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

Product Features:
  • The Ignition Knock Sensor is a piezo chrystal type sensor that reports harmonics within the engine block as the result of unfavorable ignition in the combustion chamber. The engine control module will make ignition timing and fuel injection pulse adjustme
  • Computer-Aided Design (CAD), laser scanning and 3D printing “ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) “ in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

2019 Ford Ranger Ignition and Tune-Up Products

You count on your 2019 Ford Ranger to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 12 Ignition and Tune-Up Products ranging in price from $5.99 to $66.99, you’re sure to find everything you need for your 2019 Ford Ranger.

Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 5 different brands like E3, Autolite, and NGK. 2019 Ford Ranger Ignition and Tune-Up Products start as low as $5.99!

One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 444 extensive product reviews on 2019 Ford Ranger Ignition and Tune-Up Products.

Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 2019 Ford Ranger below to get started!

Top-Rated Ignition and Tune-Up Products Brands For Your 2019 Ford Ranger

Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2019 Ford Ranger running right for years to come. In our inventory you’ll find brands like E3, Autolite, NGK, and even more.

Popular Autolite Ignition and Tune-Up Products

You’ll find popular Autolite brand products across Spark Plugs. All are waiting to get your 2019 Ford Ranger back on the road. Some of the top-rated Autolite products in these categories are:

Top-Rated Ignition and Tune-Up Products


If are what you’re looking for, our inventory holds plenty. We stock brand Ignition and Tune-Up Products for your 2019 Ford Ranger, and some of our most reviewed parts include:

FAQs for 2019 Ford Ranger Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the 2019 Ford Ranger?

Out of 12 Ignition and Tune-Up Products for the 2019 Ford Ranger, the most popular in our inventory are:
Ruthenium HX High Ignitability Spark Plug: PSPE Tip Design, LTR6BHX
from $14.99
This product is not rated
Ruthenium HX High Ignitability Spark Plug: PSPE Tip Design, LTR6BHX
Spark Plugs
Enhance Engine Performance with Reliable Spark Plug
from $10.29
This product is not rated
Enhance Engine Performance with Reliable Spark Plug
Spark Plugs