2019 Ford F59 Fuel and Emissions Systems
Find Your Specific 2019 Ford F59 Fuel and Emissions Systems
Below you will find various in-demand Ford Fuel and Emissions Systems, components and accessories for your 2019 F59. Advance Auto Parts has popular F59 parts like Air Flow Sensors, Fuel Injectors, Gas Caps and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other F59 model years including
2013,
2014,
2015,
2016,
2017,
2018,
2020,
2021,
2022 and more. Select a category of 2019 Ford F59 Fuel and Emissions Systems below and start saving instantly.
Popular 2019 Ford F59 Fuel and Emissions Systems Categories
Essential Fuel and Emissions Systems for 2019 Ford F59s
Motorad – Tethered Fuel Cap (Part No.MGC532T)
from
$18.29
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Come pre-assembled for quick and easy installation.
- Several fastener options to work with any fuel cap compartment configuration
- Fits vehicles orginally equipped with tether
- Reduces air pollution with proper sealing and venting
- Manufactured from durable, long-life materials
Dorman – Fuel Pump Control Module (Part No.E30061096243DOR)
from
$93.82
Re-engineered to address failure points in the original materials and design, Dorman’s Fuel Pump Driver Module is powder-coated for high corrosion resistance and long-lasting durability. Newly designed rubber bushings on the mounting screws help to sustain years of service.
Product Features:
See More
Product Features:
- Dorman’s fully re-engineered micro-processor provides greater response time and reliability
- Comes with rubber mounting bushings to position the module away from the steel frame for increased protection from corrosion and damage to the metal housing
- Regulates voltage to the fuel pump in order to maintain proper fuel pressure over the full operating range of the engine
- Vehicle simulator testing has been conducted on this part to ensure quality performance
Hitachi – Air Mass Sensor (Part No.B3150411789HIT)
from
$185.39
Air Mass Sensor
Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6423)
from
$99.99
CARQUEST MAF sensors are 100% new and are produced by a certified OEM supplier that designs and manufactures new mass air flow sensors
Product Features:
See More
Product Features:
- CARQUEST MAF use all new high-quality components at the highest quality standards.
- Manufactured with new and advanced technology to perform, fit and function at OE specifications.
- All new product that is tested with OEM equipment to OEM standards
- Outperforms competition when tested in extreme environmental conditions
Carquest Premium – Fuel Cap Tester Adapter (Part No.12422)
from
$39.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)
from
$34.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Cardone – Fuel Injector (Part No.2J-207)
from
$166.99
CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.
Product Features:
See More
Product Features:
- All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
- Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
- All components are renewed or replaced as necessary to ensure high quality and durability
- When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
- Guaranteed fit and function
- Meets or exceeds O.E.M. performance
Continental – Multi-port Fuel Injector (Part No.FI11371S)
from
$50.99
VDO original equipment fuel injectors are identical fit, form, and function and provide the exact quality of OE components supplied to auto manufacturers worldwide. Professional technicians and DIYers alike want quality products for ease of installation, fit, and performance. VDO fuel injectors are designed for long service life and simplified installation. They are built in OE ISO TS certified facilities and manufactured to the highest quality standards. They offer dependable performance and robust design by being original equipment while still maintaining a competitive price.
Product Features:
See More
Product Features:
- The exact OEM part
- Exact form fit and function
- Simplified plug-and-play Installation
- Durable long-lasting design
- Made in the USA
- Made in ISO certified facilites
Delphi – Fuel Pump – Mechanic (Part No.E30031191214DEL)
from
$215.07
As a leading Tier 1 supplier to the top 25 global vehicle manufacturers, Delphi understands what it takes to make the smart parts that technicians are looking for. Delphi knows that not every car in a repair shop is a newer model. But every driver still wants reliable, fast starts. So count on us to help you offer the fuel fixes that many new car dealerships cannot. Built to tough OE engineering standards, Delphi offers replacement fuel pumps for millions of domestic and imported vehicles, from American Motors to Honda, Volkswagen to Chrysler, and beyond. Older model vehicles with carburetors typically use mechanical fuel pumps. The pump can be located next to or on the engine, and uses an internal diaphragm to draw fuel from the tank and push it into the carburetor. A worn internal diaphragm is the most common cause for mechanical pump replacement. The diaphragm is made of cloth-reinforced rubber, and with age may wear out and leak causing poor fuel delivery. Because the diaphragm is integrally sealed inside of it, the entire mechanical fuel pump must be replaced.
Product Features:
See More
Product Features:
- Built to tough OE engineering standards
- Reinforced Diaphram
- Direct fit for easy installation
Carquest Premium – Mechanical Fuel Pump 360583: Includes Gasket (Part No.360583)
from
$30.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Motorcraft – Oxygen Sensor (Part No.C5010671946MTR)
from
$87.20
Oxygen Sensor
Motorcraft – Motorcraft Oxygen Sensor (Part No.C5010398074MTR)
from
$134.60
The complete line of Motorcraft sensors and emission components is recommended by Ford Motor Company exclusively for use in Ford and Lincoln vehicles. Motorcraft oxygen sensors are designed for maximum performance.
Product Features:
See More
Product Features:
- Same components used in the factory
- Units come ready to plug and play, with no need for modifications
- OE connectors and wire lengths
- Tight tolerance ranges help minimize repeat repairs and false Check Engine warnings
- Designed to help provide optimal performance and fuel economy
- OE enhancements are included in the most current designs
- Vehicle-specific coverage Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install.
Motorcraft – Original Equipment (O.E.) Sensor Assembly – Tripminder (Part No.DY-1160)
from
$33.49
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.
Product Features:
See More
Product Features:
- Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
- Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
- As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.
Motorcraft – Ambient Temp Sensor (Part No.P4025679176MTR)
from
$33.76
Ambient Temp Sensor
Autopart International Inc – Vapor Canister Vent (Part No.B70881917268API)
from
$55.51
Vapor Canister Vent
Motorcraft – Fuel Injector O-Ring Kit (Part No.C1013374364MTR)
from
$20.46
Motorcraft Fuel Injector O-Ring Kits are manufactured with premium quality in mind
Product Features:
See More
Product Features:
- All parts meet original equipment requirements for fit, finish and durability
- Specifically engineered for Ford and Lincoln vehicles
- Durability tested to meet demanding original equipment service life specifications
- Helps maintain original performance standards
Mahle – Mahle, Fuel Injector O-Ring Kit, Pack of 12 (Part No.C1013387693MAH)
from
$14.95
Mahle, Fuel Injector O-Ring Kit, Pack of 12
Dorman – Vapor Canister Vent (Part No.B7091719728DOR)
from
$96.03
Vapor Canister Vent
Motorcraft – Original Equipment (O.E.) Ring – Retaining (Part No.FPR-11)
from
$22.99
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.
Product Features:
See More
Product Features:
- Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
- Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
- As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.
Dorman – Help – Fuel Sending Unit Retainer Assortment (Part No.55812)
from
$17.29
Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock. Made of durable materials for reliable service.
Product Features:
See More
Product Features:
- Direct replacement – this fuel tank sending unit lock ring is made to match the fit and performance of the original ring on specific vehicle applications.
- Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Mahle – GS33440 Diesel Fuel Injection Nozzle O-Ring Kit (Part No.C1013200424MAH)
from
$25.65
Mahle gaskets, distributed by MAHLE Aftermarket, provides world class sealing products trusted by OEMs and Technicians around the globe. All Mahle gaskets meet or exceed the original equipment specifications providing the finest sealing products available. Mahle provides the ultimate sealing products for your light/medium duty diesel engine. Exclusive Mahle gasket coverage, not available from competitors.
Product Features:
See More
Product Features:
- Mahle gaskets, distributed by MAHLE Aftermarket, provides world class sealing products trusted by OEMs and Technicians around the globe
- All Mahle gaskets meet or exceed the original equipment specifications providing the finest sealing products available
Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)
from
$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Motorcraft – Air Charged Temperature Sensor (Part No.C6000408661MTR)
from
$69.90
Motorcraft Air Charged Temperature Sensors are designed and tested to meet OE specifications for durability and reliability under extreme conditions. These are manufactured using high standards which ensure long lasting durability. They have high resistance and offer superior service life.
Product Features:
See More
Product Features:
- Ensures long lasting durability
- Reliable under extreme conditions
- Made of high quality material
- Resists fatigue failure
- Offers superior service life
Walker Products – Air Charge Temperature Sensor (Part No.C6000408661WKR)
from
$30.62
The Walker Air Charge Temperature Sensor is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
DENSO – First Time Fit Air Fuel Ratio Sensor (Part No.C5015466288ND)
from
$116.71
DENSO a global supplier to automakers manufactures an OE-equivalent direct fit air fuel ratio sensor that maintains the quality and performance of the Original Equipment it replaces. DENSO continues to innovate with the latest development in air fuel ratio sensors. These components, also known as wide-band oxygen sensors, have a broader response range to provide much finer control of air/fuel mixtures over a greater variety of operating conditions.
Product Features:
See More
Product Features:
- Tarnish-proof platinum electrodes provides longer life and maintains accuracy
- Quick-response planar zirconia element can quickly detect oxygen concentration
- Measures A/F ratios from approximately 12:1 to 19:1
- Increased performance by mapping a/f ratios throughout rpm range
- Reduces emissions by keeping the air-fuel mixture at an optimum ratio
NTK – Wideband Oxygen Sensor: Air-Fuel Ratio 5 Wire, 20.8" Long, Heated, Direct Fit (Part No.24348)
from
$133.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, NTK uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
Bosch – Oxygen Sensor (Part No.C50101164564BOS)
from
$133.26
The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- OE Style connectors and wire lengths.
- Base ceramic probe of Zirconium and Yttrium.
- Patented Platinum Power Grid.
NTK – Wideband Oxygen Sensor: Air-Fuel Ratio 5 Wire, 16.5" Long, Heated, Direct Fit (Part No.27018)
from
$69.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, NTK uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
Upgrade your 2019 Ford F59 with Top-Quality Fuel and Emissions Systems
When it comes to maintaining or upgrading your 2019 Ford F59, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your F59 functioning at its best. At Advance Auto Parts, we offer a wide selection of 30 Fuel and Emissions Systems for the 2019 Ford F59, designed to meet your needs without breaking the bank.
From
Air Flow Sensor
replacements to
Fuel Injectors
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2019 Ford F59 at great prices.
Our Fuel and Emissions Systems inventory for this model
ranges from just $7.49 to $608.49, with
an average price of $78.57.
Our 30 Fuel and Emissions Systems in stock come from 14 trusted brands, so you’re sure to find the right part for your 2019 Ford F59 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2019 Ford F59, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names
like FELPRO Carquest Premium, and more.
FELPRO Fuel and Emissions Systems
start at just $7.49 and boast an impressive 5 stars average rating from customers.
With 166 customer reviews and counting, our 2019 Ford F59 Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 2019 Ford F59 is always ready to roll. We’re committed to providing you with everything you need to keep your F59 in top shape, all in one place.
Start shopping confidently below for your 2019 Ford F59!
Best-Selling Air Flow Sensors for 2019 Ford F59s
Enhance the driving experience in your Ford with 4 quality Air Flow Sensor components, starting at $30.62.
NTK – Wideband Oxygen Sensor: Air-Fuel Ratio 5 Wire, 16.5" Long, Heated, Direct Fit (Part No.27018)
from
$69.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, NTK uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
Motorcraft – Original Equipment (O.E.) Sensor Assembly (Part No.DY-1137)
from
$62.99
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.
Product Features:
See More
Product Features:
- Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
- Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
- As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.
Motorcraft – Air Charged Temperature Sensor (Part No.C6000408661MTR)
from
$69.90
Motorcraft Air Charged Temperature Sensors are designed and tested to meet OE specifications for durability and reliability under extreme conditions. These are manufactured using high standards which ensure long lasting durability. They have high resistance and offer superior service life.
Product Features:
See More
Product Features:
- Ensures long lasting durability
- Reliable under extreme conditions
- Made of high quality material
- Resists fatigue failure
- Offers superior service life
Walker Products – Air Charge Temperature Sensor (Part No.C6000408661WKR)
from
$30.62
The Walker Air Charge Temperature Sensor is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Most Popular 2019 Ford F59 Fuel Injectors
Customize your Ford with 8 Fuel Injectors products
like Air Flow Meters and Mass Air,
Fuel Injectors, and
Fuel Injector O-Ring Kits, all
priced under $185.39.
Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)
from
$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Carquest Premium – Fuel Injector Seal Kit (Part No.AS051)
from
$8.29
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
Hitachi – Air Mass Sensor (Part No.B3150411789HIT)
from
$185.39
Air Mass Sensor
Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6423)
from
$99.99
CARQUEST MAF sensors are 100% new and are produced by a certified OEM supplier that designs and manufactures new mass air flow sensors
Product Features:
See More
Product Features:
- CARQUEST MAF use all new high-quality components at the highest quality standards.
- Manufactured with new and advanced technology to perform, fit and function at OE specifications.
- All new product that is tested with OEM equipment to OEM standards
- Outperforms competition when tested in extreme environmental conditions
Motorcraft – Fuel Injector O-Ring Kit (Part No.CM-4717)
from
$28.99
All Motorcraft Seal designs undergo rigorous lab and real world tests in order to provide original equipment performance and reliability. Motorcraft Seals are extensively tested for proper seating and sealing under both temperature and pressure extremes.
Product Features:
See More
Product Features:
- Why Buy:
- The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.
- Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
- Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
- As with all Motorcraft and Ford Parts, any innovations or improvements developed since the manufacture of the vehicle are included in these aftermarket replacement parts, ensuring the most current technology and performance
Carquest Premium – REMAN FUEL INJECTOR (Part No.A211-2232)
from
$18.79
REMAN FUEL INJECTOR
Mahle – Mahle, Fuel Injector O-Ring Kit, Pack of 12 (Part No.C1013387693MAH)
from
$14.95
Mahle, Fuel Injector O-Ring Kit, Pack of 12
Motorcraft – Fuel Injector O-Ring Kit (Part No.C1013387693MTR)
from
$10.32
Motorcraft Fuel Injector O-Ring Kits are manufactured with premium quality in mind
Product Features:
See More
Product Features:
- All parts meet original equipment requirements for fit, finish and durability
- Specifically engineered for Ford and Lincoln vehicles
- Durability tested to meet demanding original equipment service life specifications
- Helps maintain original performance standards
Top Picks for 2019 Ford F59 Gas Caps
Upgrade Ford F59s with top-quality Gas Caps parts, including 5 OEM and aftermarket selections for your 2019 model.
Carquest Premium – Fuel Cap: 10840, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10840)
from
$21.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Locking Fuel Cap: 10510, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10510)
from
$32.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Protects your fuel from theft and vandalism
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Motorad – Tethered Fuel Cap (Part No.MGC839T)
from
$30.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Come pre-assembled for quick and easy installation.
- Several fastener options to work with any fuel cap compartment configuration
- Fits vehicles orginally equipped with tether
- Reduces air pollution with proper sealing and venting
- Manufactured from durable, long-life materials
Gates – Fuel Tank Cap (Part No.E20101064853GAT)
from
$34.86
Fuel Tank Cap
Motorcraft – Motorcraft Fuel Tank Cap (Part No.E2010357406MTR)
from
$31.86
With Retaining Straps Motorcraft offers a wide variety of caps to support the ongoing maintenance needs of Ford and Lincoln vehicles.
Product Features:
See More
Product Features:
- Motorcraft provides extensive coverage of these caps
- Available for most Ford and Lincoln vehicles
- Locking sets are offered for dual-tank applications that contain two matching caps with four keys
- Both locking- and non-locking styles are available
In-Demand Fuel Pumps for 2019 Ford F59s
Select from 5 premium Fuel Pumps parts for your 2019 Ford F59, with prices ranging from $39.99 to $608.49.
Dorman – Fuel Pump Control Module (Part No.E30061096243DOR)
from
$93.82
Re-engineered to address failure points in the original materials and design, Dorman’s Fuel Pump Driver Module is powder-coated for high corrosion resistance and long-lasting durability. Newly designed rubber bushings on the mounting screws help to sustain years of service.
Product Features:
See More
Product Features:
- Dorman’s fully re-engineered micro-processor provides greater response time and reliability
- Comes with rubber mounting bushings to position the module away from the steel frame for increased protection from corrosion and damage to the metal housing
- Regulates voltage to the fuel pump in order to maintain proper fuel pressure over the full operating range of the engine
- Vehicle simulator testing has been conducted on this part to ensure quality performance
Spectra Premium – Module Assy (Part No.SP2481M)
from
$608.49
CARQUEST fuel pump modules offer OEM or better performance from an Original Equipment Supplier. The latest advancements in fuel delivery technology are built-in to every CARQUEST Fuel Pump to deliver greater reliability.
Product Features:
See More
Product Features:
- Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
- Triple barb hose fitting provides superior, long-lasting seal
- Superior return porting for optimum fuel flow
- Enhanced pump to flange harness design provides worry-free electrical performance
- Ceramic sender card and float arm that utilizes vehicle-specific geometry to ensure accurate fuel gauge readings for each and every application
- Gradient density, dual zone filtration designed for better contamination resistance
Delphi – Fuel Pump Module Assembly: With Float Arm, Seal (Part No.FG1321)
from
$314.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
- Lower amperage draws less load on vehicle’s electrical system
- Part is validated, tested and matched to the right vehicle application
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Lower failure rates due to its innovative design and durability
Dorman – Fuel Pump Relay Module (Part No.601-240)
from
$73.99
This fuel pump driver module is a direct replacement for the original equipment module. Designed to match the original fit and function, it features a plug & play connection for an easy installation.
Product Features:
See More
Product Features:
- Direct replacement – this fuel pump driver module matches the fit and function of the original equipment module to restore vehicle operation
- Plug and play installation – this fuel pump driver requires no modifications or special tools to install
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Quality tested – vehicle simulation tested to ensure performance
Carquest Premium – Fuel Cap Tester Adapter (Part No.12422)
from
$39.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Most Sold 2019 Ford F59 Oxygen Sensors
Explore our best-selling Ford parts for the 2019 F59 among 4 OEM and aftermarket options starting from $39.99.
Bosch – Oxygen Sensor: 4 Wire, 25.87" Long, Heated, Universal (Part No.15741)
from
$61.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Includes Smart Link Connector, no soldering required
- No special tools required for installation
- Seared protection tube due to 100% functional quality test
- Performance meets or exceeds OE specifications
NTK – Switching Oxygen Sensor: 4 Wire, 17.75" Long, Heated, Direct Fit (Part No.22052)
from
$39.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
Motorcraft – Oxygen Sensor (Part No.C5010671946MTR)
from
$87.20
Oxygen Sensor
Bosch – Wideband Oxygen Sensor: 4 Wire, 18.89" Long, Heated, Exact Fit (Part No.18154)
from
$75.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Direct Fit includes OE Connector for easy installation
- Performance meets or exceeds OE specifications
- True Direct-fit OE connectors and harness
Top-Rated Fuel and Emissions Systems Brands For Your 2019 Ford F59
Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2019 Ford F59s. Below you’ll find some of our best rated Fuel and Emissions Systems from FELPRO and Carquest Premium, and more. Fuel and Emissions Systems from these brands that fit a 2019 F59 start at just $7.49 and are rated as high as 5 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.
Popular FELPRO 2019 Ford F59 Fuel and Emissions Systems
When it comes to maintaining or upgrading your 2019 Ford F59, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Fuel and Emissions Systems, specifically designed for the 2019 Ford F59. With over 1 FELPRO brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $7.49. Plus, with over 109 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$7.49
$7.49
(109)
“Replaced the boring in my TBSS fuel injectors and there is no more leaks.”
Popular Carquest Premium 2019 Ford F59 Fuel and Emissions Systems
Carquest Premium auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 2019 Ford F59 owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2019 F59, Advance Auto Parts carries a full inventory of 6 Carquest Premium Fuel and Emissions Systems. Plus you will be keeping your Ford in peak condition while saving money because prices on these Carquest Premium Fuel and Emissions Systems range from $8.29 to $99.99, plus, with more than 57 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.
FAQs for 2019 Ford F59 Fuel and Emissions Systems
Which Fuel and Emissions Systems are best-sellers for 2019 Ford F59s?
Out of 30 Fuel and Emissions Systems that fit 2019 Ford F59s, the following parts are the top sellers:
- Fuel Cap: 10840, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (10049289) – $21.99
- Oxygen Sensor: 4 Wire, 25.87" Long, Heated, Universal (11410320) – $61.99
- Locking Fuel Cap: 10510, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (10049410) – $32.99
What’s the price range for 2019 Ford F59 Fuel and Emissions Systems?
Fuel and Emissions System prices for the 2019 Ford F59 start at $7.49 and go up to $608.49 for the most premium parts.
What’s the average price of a Fuel and Emissions System for a 2019 Ford F59?
The average price for Fuel and Emissions Systems for the 2019 Ford F59 is $78.57. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Fuel and Emissions Systems for other Ford F59 model years?
What are the cheapest Fuel and Emissions Systems for my 2019 Ford F59?
The cheapest 2019 Ford F59 Fuel and Emissions Systems we carry in stock are:
- Fuel Injector O-Ring Kit (3504360) – $7.49
- Fuel Injector Seal Kit (11692632) – $8.29
- Fuel Injector O-Ring Kit (11844987) – $10.32
- Mahle, Fuel Injector O-Ring Kit, Pack of 12 (11884282) – $14.95
- REMAN FUEL INJECTOR (50085603) – $18.79
What types of Fuel and Emissions Systems do you sell for my 2019 Ford F59?
As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 2019 Ford F59:
Can I get help with 2019 Ford F59 Fuel and Emissions System orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Fuel and Emissions Systems and more.
What is your return policy for Ford F59 Fuel and Emissions Systems?
Advance Auto Parts keeps returns simple. For new Ford F59 Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
