2019 Ford Escape Body Parts

Essential 2019 Ford Escape Body Parts

KAI – New Standard Replacement Grille Reinforcement Panel (Part No.FO1207121)

New Standard Replacement Grille Reinforcement Panel

from

$44.99
With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Grille Reinforcement Panel. It is Designed to Replace Your Existing Grille Bracket. Check to Be Sure it Fits Your Vehicle.

Product Features:
  • Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

WeatherTech – Mud Flap: Direct Fit, Set of 2, Contoured, Without Logo, Black, QuickTurn Fastening System (Part No.110040)

Mud Flap: Direct Fit, Set of 2, Contoured, Without Logo, Black, QuickTurn Fastening System

from

$146.99
The WeatherTechMudFlap Laser Measured for a Perfect Fit set literally mounts in minutes (in most applications) without the need for wheel/tire removal, and most importantly without the need for drilling into the vehicles fragile painted metal surface. Contoured specifically for each application and molded from a proprietary thermoplastic resin, the WeatherTech MudFlap will offer undeniable vehicle protection.

Product Features:
  • Protects Your Vehicles Fenders And Exterior From Rocks, Mud, Road Grime And Other Debris Picked Up By Vehicles Wheels
  • Featuring The Patented QuickTurn Hardened Stainless Steel Fastening System
  • Provide Protection For Your vehicles Most Vulnerable Rust Area
  • Protecting The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
  • Molded From A Proprietary Thermoplastic Resin
  • No Drilling Required And Installs In Minutes
See More

Motorcraft – Window Switch (Part No.O3060677758MTR)

Window Switch

from

$170.45
Window Switch

Dorman – Help – Exterior Door Handle Front Right and Rear Left and Right (Part No.90735)

Exterior Door Handle Front Right and Rear Left and Right

from

$56.99
Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Excellent value – original equipment quality at a lower price
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

Auto Ventshade (AVS) – Bumper Protectors, Exterior Accessories, Black, OE Style, Ea (Part No.2034001)

Bumper Protectors, Exterior Accessories, Black, OE Style, Ea

from

$92.99
OE Style Bumper Protectors shield your vehicles rear bumper from wear and damage caused by day-to-day loading and unloading. Unlike flat bumper plates that protect only the top surface, it’s 3-D design is custom-fit to wrap around the vulnerable bumper lip for maximum protection. OE Style Bumper Protectors are made from our exclusive Dura-Flex 2000 TPO to match original equipment style, with a matte black finish that’s 100% UV protected to resist chalking . They install in minutes and last a lifetime, thanks to their super-secure automotive-grade 3M adhesive. So keep your vehicle looking its best, with top-of-the-line bumper protection.

Product Features:
  • Protects against damage from loading and unloading
  • Covers existing scuffs, scratches, and nicks
  • Custom-fit coverage wraps around bumper lip
  • Installs in minutes, protects for a lifetime
See More

K-Source – Truck/ SUV Replacement Mirror: Passenger Side, Convex, Includes Backing Plate (Part No.80254)

Truck/ SUV Replacement Mirror: Passenger Side, Convex, Includes Backing Plate

from

$43.99
Replacement Mirror Glass Assembly. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:
  • Replace your cracked or broken passenger side Mirror glass at a fraction of the dealer cost
  • Original equipment quality, fit and function
  • Includes Backing Plate
  • Step-by-step instructions for easy installation
See More

KAI – Bumper Cover Reinforcement (Part No.FO1025111C)

Bumper Cover Reinforcement

from

$109.99
New CAPA Certified Standard Replacement Front Bumper Cover Reinforcement Bar

Product Features:
  • Made Of High Strength Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Door Lock Actuator – Integrated With Latch (Part No.937-655)

Door Lock Actuator - Integrated With Latch

from

$106.99
This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:
  • Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
  • Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
  • Safety compliant – part has undergone simulated crash testing under government guidelines
  • Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years
See More

Dorman – Mirror Assembly: Driver Side, Power Adjustment, 1 Pack (Part No.959-202)

Mirror Assembly: Driver Side, Power Adjustment, 1 Pack

from

$111.99
This door mirror was engineered to look, fit and function like the original mirror assembly for your vehicle’s specific year, make and model. It includes the same mirror glass, housing, bracket and technology as the part that came on the vehicle.

Product Features:
  • Perfect replacement – reverse engineered to look, fit and function exactly like the original door mirror on your vehicle’s specific year, make and model
  • Complete assembly – includes same mirror glass, housing, bracket and technology as the original part that came on the vehicle
  • Cost-effective and reliable – functions similarly to the original part but is much less expensive than getting a replacement from the dealership or original manufacturer
  • Easy installation – no special tools or equipment is necessary for installing this new part
See More

COAST TO COAST – Top Half Cover, Replacement, Plated, Chrome, Abs Plastic, Set Of 2 (Part No.CCIMC67547R)

Top Half Cover, Replacement, Plated, Chrome, Abs Plastic, Set Of 2

from

$101.99
Coast to Coast International door handle and mirror covers are a quick way to add a touch of chrome or black-out styling to change the appearance of a vehicle. All covers are designed and manufactured to overlay the OEM handle or mirror to give the appearance of a factory upgrade. Installation is quick and easy with no tools required. Pair them with CCI grille overlays and Impostor(R) wheel skins for a complete package look. Limited lifetime warranty. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:
  • A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Mirror Covers. Add Handles And Wheel Skins (Sold Separately) For A Factory-Style Package
  • Easy Installation
  • Fits Like A Glove Over Existing Mirrors And Stay Securely Attached Using A Retention System Molded Into The Cover So You Can Be Confident That They Wont Fall Off While Driving
  • UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
  • COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
  • EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.
See More

KAI – New CAPA Certified Standard Replacement Passenger Side Rear Bumper Cover Reflector (Part No.FO1185102C)

New CAPA Certified Standard Replacement Passenger Side Rear Bumper Cover Reflector

from

$27.99
With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New CAPA Certified Standard Replacement Passenger Side Rear Bumper Cover Reflector. It is Designed to Replace Your Existing Bumper Cover Reflector. Check to Be Sure It Fits Your Vehicle.

Product Features:
  • Made Of ABS Thermoplastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – New CAPA Certified Standard Replacement Grille, Black With 3 Chrome Moldings (Part No.FO1200542C)

New CAPA Certified Standard Replacement Grille, Black With 3 Chrome Moldings

from

$251.99
With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New CAPA Certified Standard Replacement Grille, SEL/Titanium Models, Black With 3 Chrome Moldings, [Emblem Not Included]. It is Designed to Replace Your Existing Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:
  • SEL/Titanium Models, Black With 3 Chrome Moldings, [Emblem Not Included], Made Of Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

COAST TO COAST – Chrome Abs, With Covers For 4 Doors, Without Keyhole/Door Handle Trim (Part No.CCIDH68562B)

Chrome Abs, With Covers For 4 Doors, Without Keyhole/Door Handle Trim

from

$79.99
Coast to Coast International door handle and mirror covers are a quick way to add a touch of chrome or black-out styling to change the appearance of a vehicle. All covers are designed and manufactured to overlay the OEM handle or mirror to give the appearance of a factory upgrade. Installation is quick and easy with no tools required. Pair them with CCI grille overlays and Impostor(R) wheel skins for a complete package look. Limited lifetime warranty. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:
  • A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Door Handle Covers. Add Mirror Covers And Wheel Skins (Sold Separately) For A Factory-Style Package
  • Door Handle Covers Are Year-Make-Model Specific And Available In Different Finishes
  • Fits Like A Glove Over Existing Handles And Stay Securely Attached Using A Retention System Molded Into The Cover So You Can Be Confident That They Wont Fall Off While Driving
  • UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
  • COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
  • EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.
See More

Dee Zee – Powder Coated, With Black Trim, Unlighted, Requires Running Board Mounting Kit (Part No.DZ16203)

Powder Coated, With Black Trim, Unlighted, Requires Running Board Mounting Kit

from

$541.99
Dee Zee NXc Steps (board) The NXc step is designed for today crossover utility vehicles (CUV). A universal board combined with custom fit brackets (sold separately) fit all listed applications. The board is available in three different finishes for step and trim, Black or Chrome, Black or Black, Stainless or Black. Lightweight aluminum powder coated frame. Full length protective accent trim. Slip resistant raised rubber grommets on step area. Required custom fit bracket kits sold separately. Stainless or Black

Product Features:
  • Lightweight Aluminum Powder Coated Frame
  • Full Length Protective Accent Trim
  • Slip Resistant Raised Rubber Grommets On The Step Area
  • NRT(TM) Powder Coated Steel Braces
  • No Drilling Required
See More

Dorman – Hood Latch Assembly (Part No.820-003)

Hood Latch Assembly

from

$75.99
Hood no longer opening or closing properly? This replacement hood latch assembly matches the fit and function of the original equipment hood latch and is made of corrosion-resistant materials for reliable service.

Product Features:
  • Direct replacement – this hood latch assembly matches the fit and function of the original equipment latch
  • Durable construction – corrosion-resistant housing enhances this latch’s durability and prevents functional deterioration
  • Easy installation – requires no special tools to replace
  • Quality tested – this part has undergone vehicle fitment and material testing to ensure proper fit and reliable service
See More

KAI – New CAPA Certified Diamond Premium Replacement Rear Bumper Impact Absorber (Part No.FO1170132DSC)

New CAPA Certified Diamond Premium Replacement Rear Bumper Impact Absorber

from

$107.99
As the Leading Value-Added Global Distributor of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles While Offering Our Customers the Most Comprehensive and Cost Effective Part Solutions, We Are Supplying a New CAPA Certified Diamond Premium Replacement Rear Bumper Impact Absorber, Without Tow Package. It is Designed to Replace Your Existing Bumper Impact Absorber. Check to Be Sure it Fits Your Vehicle.

Product Features:
  • Without Tow Package, Made Of Polycarbonate and Polybutylene Terephthalate
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Help – Hood Prop Rod Retainer Clip (Part No.45886)

Hood Prop Rod Retainer Clip

from

$17.29
This direct-replacement hood prop rod clip matches the original equipment specifications to ensure reliable fit and function for this application. Made of quality materials, it is a cost-effective alternative to the dealer part.

Product Features:
  • Direct replacement – this hood prop rod clip matches original equipment specifications for a reliable repair
  • Durable materials – this clip is made from quality materials for a long service life
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than a dealer replacement
  • Confirmed fit – this clip has been verified to fit and function for this application
See More

Le Bra – Front End Cover (Part No.55942-01)

Front End Cover

from

$159.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:
  • Full front end coverage
  • Custom fit exactly to your vehicle
  • Installs easily with no drilling or tools
  • Leather grain vinyl
  • Protect against rock chips, bugs and road tar
  • Soft inner layer
See More

Le Bra – Front End Cover (Part No.551143-01)

Front End Cover

from

$159.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforate

Product Features:
  • Full front end coverage
  • Custom fit exactly to your vehicle
  • Installs easily with no drilling or tools
  • Leather grain vinyl
  • Protect against rock chips, bugs and road tar
  • Soft inner layer
See More

Dorman – Liftgate Lock Actuator – Integrated With Cinch Latch (Part No.931-273)

Liftgate Lock Actuator - Integrated With Cinch Latch

from

$206.99
This liftgate lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models..

Product Features:
  • Reliable replacement – this liftgate lock actuator has undergone extensive quality and safety performance testing.
  • Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
  • Cost-effective solution – offers original equipment quality at competitive price
  • Quality tested – this part has undergone try-on and cycle testing to ensure a quality fit and long service life
See More

Dorman – Tailgate Lock Actuator (Part No.759-806)

Tailgate Lock Actuator

from

$151.99
This tailgate lock actuator motor is designed to match the fit and function of the original motor on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this tailgate lock actuator motor is designed to match the fit and function of the original motor on specified applications
  • Ideal solution – this motor is a reliable replacement for an original part that has failed due to fatigue, water infiltration or collision damage
  • Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
  • Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence
See More

Dorman – Liftgate Lock Actuator (Part No.937-670)

Liftgate Lock Actuator

from

$92.99
This liftgate lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:
  • Reliable replacement – this liftgate lock actuator has undergone extensive quality and safety performance testing
  • Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
  • Cost-effective solution – offers original equipment quality at competitive price
  • Quality tested – this part has undergone try-on and cycle testing to ensure a quality fit and long service life
See More

Dorman – Window Regulator & Motor Assembly: Power, 1 Pack (Part No.741-604)

Window Regulator & Motor Assembly: Power, 1 Pack

from

$57.99
This replacement power window motor and regulator assembly is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:
  • Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
  • Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
  • Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
  • Reliable design – engineered in North America and backed by long history of automotive aftermarket experience
See More

Dorman – Window Regulator: Power, 1 Pack (Part No.752-296)

Window Regulator: Power, 1 Pack

from

$50.99
This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:
  • Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
  • Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
  • Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
  • Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
See More

Motorcraft – Window Regulator and Motor Assembly (Part No.O3052345228MTR)

Window Regulator and Motor Assembly

from

$106.95
Motorcraft window regulators and regulator assemblies are designed to provide perfect fit and easier, faster installation. They also include the latest innovations and engineering upgrades.

Product Features:
  • Pre-lubricated for quiet operation
  • Attachment points line up with the vehicle door and glass holes, providing a quality installation
  • To help ensure smooth travel and optimal window speeds, regulator and glass paths are matched
  • Durability tested
  • Regulator assemblies include Motorcraft window lift motors
See More

COAST TO COAST – Direct Fit, Chrome Plated, 4 Piece (Part No.CCISM602)

Direct Fit, Chrome Plated, 4 Piece

from

$144.99
Coat to Coast International body side molding is a stylish accessory that compliments any vehicle. Durable ABS plastic is chrome plated for lasting shine. Side moldings install effortlessly with automotive grade 3M tape. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:
  • Constructed From High-Quality, Durable, Automotive Grade ABS
  • Two Layers Of Clear Coat Enhance And UV Protect The Finish
  • Quickly And Affordably Upgrades The Trim Level Appearance Of A Vehicle
  • Installs In Minutes Without Tools Using Pre-Applied Automotive Grade 3M Tape
  • Easy Installation
  • Mount with 3M Tape
See More

2019 Ford Escape Body Parts

You count on your 2019 Ford Escape to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Body Parts. With 43 Body Parts ranging in price from $7.99 to $541.99, you’re sure to find everything you need for your 2019 Ford Escape.

Brands matter. If you want to shop a specific Body Parts brand, we stock 11 different brands like Dorman, COAST TO COAST, and KAI. 2019 Ford Escape Body Parts start as low as $7.99!

Did we mention you can order your Body Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Body Parts inventory for your 2019 Ford Escape below to get started!